I finally had a chance to test the Benchmade Bugout, but it lasted for ten minutes... Farmer E Postboks 145 2101 Skarnes Norway
Пікірлер: 567
@NickShabazz2 жыл бұрын
Glad to be your secret weapon!
@jsimpson42 жыл бұрын
Nick, you’re always my go to for knife breakdown instructions!
@kerryrwac2 жыл бұрын
Did you cringe a bit when E broke out the power tools?
@jagerwayz57212 жыл бұрын
Get over yourself.
@Chaosgoat2 жыл бұрын
I was just about to tell this guy to ask you for proper guidance!!
@regan.80772 жыл бұрын
Oh hi Nick.
@brentalbers97822 жыл бұрын
"Caressing them like a loved one", that was hilarious
@freakmean162 жыл бұрын
The omega spring was the reason I ditched on a Griptilian and went straight to the Para 3, as someone living very far from the US too, I know it will take ages to get some replacements!!!
@iamfuckingyourwaifuandther27432 жыл бұрын
I had the same experience. Bought a bugout, broke the spring in a week. Benchmade wanted me to send it back and pay shipping to send it to them instead of just shipping me omega springs, so I returned it with free shipping, and bought a pm2.
@RadDadisRad2 жыл бұрын
I just bought a bunch of extra omegas. I mean they are cheap and many places with tooling make non BM branded springs that work better than factory. I highly suggest spare parts.
@patrickriarchy60542 жыл бұрын
@@RadDadisRad But should you really need to buy a bunch of them and change them out?. Shouldn't the knife just work?. I wouldn't want to carry around springs and a torx set just to have to field repair a knife.
@ericpitre40312 жыл бұрын
That grip is all about profit for BM. Cheap scales n internals, s30 yu can get under $60,easy, just a $$maker. I own a Tenacious between BM n Spydie. Case, Buck, CSteel,etc.🔪
@iamfuckingyourwaifuandther27432 жыл бұрын
@@patrickriarchy6054 a field repair on a benchmade is sticking a stick in the hole
@person9062 жыл бұрын
I love how the shots of a man enjoying a scenic stroll in the wilderness is accompanied by aggressive metal lmao so manly
@LIT_FUSED2 жыл бұрын
I love the part about watching grown men open boxes and holding and caressing on their knives like it was a loved one! So true!! I laughed so hard! Great video!
@TheJesterOAO2 жыл бұрын
Finally a video about broken omega springs! Mine lasted probably three months max. Getting new springs in czechia or sending the knife to benchmade pretty much wasn't an option. So I made my own springs and it works better than original ones :D
@servantofyeshua23132 жыл бұрын
Chad move
@TheJesterOAO2 жыл бұрын
@@servantofyeshua2313 How are facts insulting?
@natethekidd93552 жыл бұрын
@@TheJesterOAO being a chad is a good thing 😂
@nicohurter29732 жыл бұрын
I am from South Africa, the possibility of an omega spring breaking, is the reason why I haven't buy any Benchmade knife.
@DouglasRosser2 жыл бұрын
I'm from Oregon, where Benchmade is headquartered and I only own one. It's a pricey "fidget flipper". But then again, all chichi $$$ knives are nowadays.
@RadDadisRad2 жыл бұрын
With the availability of aftermarket omegas you’d be crazy to not buy one. They are stupid reliable.
@griffinm92 жыл бұрын
@@RadDadisRad I mean the majority of people don’t want to pay over $100 for a product they have to modify with aftermarket products in order to insure it remains usable. They’ll just buy something that doesn’t require that.
@meilnartin91092 жыл бұрын
@@griffinm9 yes. I'll never own another BM. Omega springs...and auto springs are GARBAGE from them. Sold all of mine. Had 7 at one time......never again. They can keep their butterfly tax.
@ahoearth97892 жыл бұрын
I had exactly the same problem during a two weeks vacation. The knife became half dangerous and half useless... Benchmade has sent me a replacement spring free of charge here in Europe, but now I never carry a benchmade only, and when travelling with one knife, I go for a Spyderco.
@davidh01592 жыл бұрын
I've seen so many people on youtube video comments saying they've never had a problem with the omega springs. And yet, here you are. I hope you can get new springs in some kind of timely fashion.
@gomezx6056 Жыл бұрын
If you buy a bug out, be proactive buy springs as a replacement. I’ve had mine for over 2 going on 3 years and still riding on the original. I use my knife hard I’ve torn it open dozens of times to clean it and customize hardware. Great knife.
@thinktwice88602 жыл бұрын
Nick is the man! He’s led me through all of my knife maintenance projects!
@Feeoryne2 жыл бұрын
You are a funny man!!! Great sense of humor!! Glad you took a break!!
@FarmerE2 жыл бұрын
Thank you!
@browneye50BMG2 жыл бұрын
“Lets call it the Bugout and have a bespoke piece of piano wire be a single point of failure.” -Benchmade
@snorman19512 жыл бұрын
Maybe a bit of r&d could have prevented that. But what can you expect from America's premier knife maker? That stuff costs money. Meanwhile my cheap China knives keep on going.
@code_6 Жыл бұрын
There seems to be a lot of brand equity in Benchmade products.
@theway30582 жыл бұрын
This dude sums us all up in our small knife community. Fun channel.
@naturallyadapted20962 жыл бұрын
In a pinch, you can always make new omega springs with memory wire. I believe omega springs are either 25 gauge or 22 gauge wire.
@ataglancepaul2 жыл бұрын
Stick with the Spyderco. Will Not let you down. Good luck.
@SurvivalistMedia2 жыл бұрын
I don't know if I'd say "won't let you down." Benchmade's warranty is pretty great compared to spyderco. Plus spyderco's obsession with red lock tight doesn't speak volumes to their belief that their own knives could be maintained or disassembled. I've been told to pound sand when it came to having my spyderco military fixed under warranty, and it basically just needed a new scale because it chipped around the screw. After market would have had me covered if spyderco hadn't put it together with permanent thread locker. They are not as reputable in the warranty department as they should be considering their cost.
@cheapandeasy17152 жыл бұрын
@@SurvivalistMedia Good thing Benchmade's got a decent warranty...you're gonna need it.
@KingKsEDCАй бұрын
@SurvivalistMedia I like BM sometimes but Spyderco is 50x better.
@Chaosgoat2 жыл бұрын
Para 3 lightweight is the BEST!
@richlabombard67802 жыл бұрын
You got that right!
@dlife74272 жыл бұрын
It's a damn good one. That's for sure.
@appalachiangunman95892 жыл бұрын
I’d like to check that out, I have the Manix 2 lightweight and even with athletic shorts on you can’t tell it’s clipped in your pocket sometimes, and I think the Para 3 lightweight is even lighter.
@jeremysuggs83452 жыл бұрын
I can't find a whole lot wrong with that statement. It is an excellent super sharp slicy wonderful everyday carry and it comes in a lot of varieties 👍😎🤘
@fingerboarding20932 жыл бұрын
I returned my bugout after hearing stories of the spring breaking. Hoping for a speedy spring shipment!
@FarmerE2 жыл бұрын
Thank you!
@clintashmead35582 жыл бұрын
I love the Bugout and Nick saves everyone’s ass. I’ve never had an issue with my omega springs but I put a drop of oil in the axis area to help prevent wear in any rub spots.
@rubendelosrios90212 жыл бұрын
Hope you had a great vacation, you deserve it. And hopefully you'll get the knife fixed.
@greasemonkey9006510 ай бұрын
You are a funny gentleman. We are like giddy school children around knives. My wife has norwegiian ancestry, and early on in our marriage, I asked for a Norwegian Knife to honor her ancestry for my birthday. She got me a Helle Dokka. Beautiful Knife, but it came very dull from the factory (duller than a butter knife). Once we sharpened it, it is truly beautiful and purposeful. IT IS my back up knife, and I used it when I go camping. My Bugouts have been pretty reliable, and I put them through hard use. You must have received the one bad one in a while.
@bingostar92072 жыл бұрын
That para 3 is built like a tank! Bug out is a cool blade shape but can’t bring myself to pay so much for what feels like a cheaply built knife. This reinforces my thought... Thanks for sharing.
@FarmerE2 жыл бұрын
Thank you, Rob!
@M.K.M2 жыл бұрын
This bugout knife brought me here and now i am hooked to this channel....
@Wanucho2 жыл бұрын
When it comes to lock strength and reliability, i trust my Cold Steel Recon 1 and Mini Recon 1 as my reservist and civilian carry.
@rommelthedesertfox3089 Жыл бұрын
Axis lock is stronger
@techfrank243110 ай бұрын
@@rommelthedesertfox3089it's not even close to the tri-ad lock strength
@rommelthedesertfox308910 ай бұрын
@@techfrank2431 yea it’s stronger than the triad lock
@techfrank243110 ай бұрын
@@rommelthedesertfox3089 I can't tell if you're joking or you lack knowledge when it comes to locking mechanism strength knives
@Mgizler12 ай бұрын
@@rommelthedesertfox3089definitely not stronger
@avihsnis2 жыл бұрын
Channel is a gem, as nick would say ;) subbed!
@MPerry-ox9qb6 ай бұрын
I’ve had numerous Benchmades over the years. Never had one go out. Not saying one won’t, but they’re not as fragile as people say in my experience. I think the problem is with people pulling back on the omega springs on one side only. You need to pull back on both sides of the Omega springs at the same time. If not you can expect problems.
@jojoqvenx Жыл бұрын
I flinched when you removed the blade. The bugout is a huge pain in reassembling the blade screw part.
@russtibbs92162 жыл бұрын
Exactly why I will not carry a benchmade. I have had 3 break after using them for less than a month. No more axis locks for me.
@knifeaddict10142 жыл бұрын
That part is called the omega spring you pretty much have to send the knife in to Benchmade! Good luck with that because the time it will take them to fix that lol…….you can find the omega spring on eBay if you wanna replace it your self, which is pretty simple!
@choimeca2 жыл бұрын
Usually they send it to you. I´m from germany and received it via mail.
@knifeaddict10142 жыл бұрын
@@choimeca last time I called about one they told me I had to send it in!
@choimeca2 жыл бұрын
@@knifeaddict1014 🤔 maybe im a Lucky guy.
@buckshot19552 жыл бұрын
They sell them on Etsy too.
@GG-ml3vr2 жыл бұрын
Very easy to replace the spring if you have a new one
@floridamanknives2 жыл бұрын
I love your videos! I was sad to see this, but not surprised I’ll admit. 🙌
@DouglasRosser2 жыл бұрын
Buy a Ganzo knife from AliExpress that uses a similar mechanism. You can steal the wire-spring (called an Omega spring I think) from the Ganzo to fix your Benchmade. Might come in faster than a replacement directly from Benchmade. I don't understand why they don't include **several** extra springs with each new knife...
@tg947022 жыл бұрын
Because Benchmade would rather you send the knife in and wait several weeks forcing you to buy a second knife because you can't live without one of their knives in your pocket.
@snorman19512 жыл бұрын
I would suggest skipping step one(buying the Benchmade) and go right to step two. Buy the Ganzo. Save big bucks. Use it forever or until you lose it and buy another. The price penalty for buying American made knives is just ridiculous. China makes really good knives too. I would greatly prefer to buy American made knives, but they have priced themselves out of the market for the most part.
@ronbisti43522 жыл бұрын
You confirmed my suspicion that those springs are garbage
@nightfury84402 жыл бұрын
They can be. Benchmade QC can be mehhh. That being said my Grip has been going strong for years and it's never broken its spring.
@brandonm61172 жыл бұрын
I laughed when you said "I should have brought 7" lol
@KrlDngr2 жыл бұрын
New favorite channel 🤘
@FarmerE2 жыл бұрын
Welcome, Karl!
@logan.13902 жыл бұрын
If you go to a local arts and craft store, you’ll be able to buy some memory wire. Buy some memory wire with a similar thickness to the broken omega spring. Take out then omega spring that is still intact as a template and all you’ll have to do is bend the memory wire to the same shape (or close enough) and cut it to length and you’ve got unlimited omega springs for under $5. Ive done it with my 940’s broken spring and now I just make them as I need 👍🏻
@paulf41332 жыл бұрын
why arent you using your spydercos anymore?
@SpecterSeventy22 жыл бұрын
Probably just for fidget factor variety plus that Bugout is seriously lightweight, even for its size. However, I have one Bugout (as a collector) and think they feel cheap & overly flexy in the hand… especially for their price.
@FarmerE2 жыл бұрын
I use them everyday! Especially the Shaman!
@outahismind2 жыл бұрын
I'm sorry you had this issue with the bugout. The Springs are sometimes known to break. Benchmade should replace them for you if they ship that far. I absolutely love the knife and sounds like you do as well. If you want to look for a third party selling the springs they are called Omega Springs. This might help find some faster.
@FarmerE2 жыл бұрын
Thanks, Josh!
@SodaPopCurtis8082 жыл бұрын
Your production value is very good. Subscribed….
@LenRamSa2 жыл бұрын
I know it's not a common occurrence, but failures like this make me question the axis lock reliability. For EDC is not a big deal, but if you depend on your knife for work or while being out in the woods, this is definitely worrisome.
@TheMasonator7772 жыл бұрын
I imagine it’s the unsupported flexible plastic scales, not the lock. I don’t see it failing in aluminum, steel, or titanium.
@LenRamSa2 жыл бұрын
@@TheMasonator777 the omega springs are installed in the locking mechanism, which is all metal. They don't engage the plastic handle, as seen on the knife close up towards the end.
@jeremysuggs83452 жыл бұрын
I'm pretty sure failures like this with the omega spring are common occurrence
@CallMeDave22 жыл бұрын
If you’re going to depend on a knife, carry a full-tang fixed blade with Micarta handles.
@BadSensation2 жыл бұрын
Cold Steel American Lawman - not as fidgety (that being said - I still fidget with it like there's not tomorrow, works super well) but that lock will basically never let you down.
@MethodOverRide2 жыл бұрын
Right, for use around a farm or hard use in general I want the strongest lock available. If you want a toy then you can't be disappointed when it breaks as all toys do.
@_Nathan-2 жыл бұрын
Agreed. What a fantastic knife
@languaj2 жыл бұрын
your videos are awesome
@thinktwice88602 жыл бұрын
Hey farmer! Greetings from Georgia, US! Your videos are great! Love my new Bugout (G10) and Freek. But understand that this doesn’t help you when your Omega spring breaks. Did you ever get your replacement springs, and if so, how long did it take to receive them? Happy fidgeting!
@jimyocum95562 жыл бұрын
Mine did the same Farmer..I got replacement ones on Amazon (12.00) that are a little stiffer in a good way and look stronger as well.. they've outlasted the factory ones so far and I fidget alot and cut a little
@dan-dan-da-treeman2 жыл бұрын
Someone needs to send this man a box of Omega springs....now!
@SKPhoto8162 жыл бұрын
As a similarly large human I suggest you invest in a good fixed blade knife. It may not be fidgetable but they are much more reliable and lower maintenance. My latest has been a White River Knives Backpacker Pro, I’m floored with it and it’s nice to not worry about it doing it’s job
@lourieholl2 жыл бұрын
As a similarly large human I have to add that I also reached this conclusion but the restrained fidgeting ability of a fixed blade necessitated me to start flipping and spinning the fixed blade knife which resulted in more than a few deep cuts and also one hole in the centre of my palm.
@SKPhoto8162 жыл бұрын
@@lourieholl that is the danger of fixed blades. I too have super glued my cuts shut and even pierced the top of my foot when I dropped one. The trade off in reliability is still worth it for me
@davidwilson54052 жыл бұрын
Spyderco Siren...absolutely corrosion proof and very strong.
@FarmerE2 жыл бұрын
I have one!
@jsimpson42 жыл бұрын
That stinks for you. Hopefully you get your omega springs quickly and are back up and running soon. Stay safe!
@FarmerE2 жыл бұрын
Thanks, man!
@Will-W2 жыл бұрын
ok, so disclaimer, I'm a spyderco fanboy, that said, i love my M4/aluminum tanto bailout. It's seen about as much use as your bugout did in the video, it usually goes in my pocket when I go into town (going into town is a monthly thing vs at home it's a PM2 or Shaman depending on what I'm doing in the yard. But even though I have the bailout in my pocket, I keep an old crkt m16-01kz, a Kershaw Launch 9, streamlight and CR123a batteries in a sunglasses case, and Spyderco Manix in my man-purse/backpack. And in the car there are a couple fixed blades and a Ka-Bar LDK in my wallet, and a gerber keychain knife (zip blade) on my keys, and you know I think I'm realizing I might have a problem...
@rommelthedesertfox3089 Жыл бұрын
940 is better
@beaurex47562 жыл бұрын
I finally broke down and bought a Bugout with titanium scales from SMKW. It arrived with a semi-sharp blade that was off-center and had pretty serious lock-stick. The SMKW website describes the blade as 'satin finish' but it's the usual stonewash finish. I returned it with a note listing these quality problems and asked them to send a replacement that was free of defects. They issued me a refund, instead. Meanwhile, the $23 Bugout clone I bought from Ali Express continues to function well and remains in my EDC lineup. And for what it's worth, unless you have a 'real' Bugout to compare it to, I bet 99% can't tell it's a fake.
@srfozzie81992 жыл бұрын
I had this problem with my Benchmade Mini Freek. I just went to my local art and craft store and bought spring wire and made one myself. It takes a little bit of patience and a few pairs of pliers, but it seems to hold up rather well as I haven't had an issue since. But I also do not daily carry it anymore. Best of luck
@FarmerE2 жыл бұрын
Thank you!
@daveouterspace2 жыл бұрын
I’ve stayed away from omega spring knives for this reason
@matthewhamilton1833 Жыл бұрын
I gotta say, people that include fidgeting as part of reviewing a knife make me ignore most of what they say. Knives are tools not toys. With that said I appreciate you showing the bugout's weak point. I hope you recover from you fidget addiction.
@ftlaud9112 жыл бұрын
That sucks man!! Never owned a BM for that reason. Went with Para 3 instead. Love it and bought multiple variants now to test different steels. Just don't pry with any of them or tips will break. Your YT video part was hilarious and true.
@robinpohl27022 жыл бұрын
Exact Same but for the pm2, awesome knives
@spydiho Жыл бұрын
I have the bugout and several para3s , para3 is my first choice , I always carry it, when I carry my bugout I still have my p3 in my pocket also, want be caught without it.
@johnnyventurino89472 жыл бұрын
I'm exactly just like you. Im constantly playing with my knife collection, especially my Spyderco collection. I love Spyderco knives, I probably have 20 Spydercos and love them all and still want a lot more of them. Plus I mainly buy all black Spydercos. The blade all black and the handles and hard wear. I think the all black just looks bad ass. Great video my friend.
@spicey99512 жыл бұрын
Same thing happened to my Nakamura 484-1, I'm in Canada and didn't want to ship my knife to benchmade so I got some omega springs from etsy. They work like a charm!
@Mgizler12 жыл бұрын
I had a bugout that I carried for about 8 months and never had an issue. Honestly.. I've never had a spring break on any Benchmade that I have ever owned. I currently carry a griptilian and so far so good. But..........this is the main reason why I got rid of all my other Benchmades in the past. I couldn't 100% rely on them. I still don't feel completely confident in my griptilian, and it all boils down to the omega springs. But .. I always carry a backup knife. Usually a Vic hunstman. Keep us updated on the spring situation. I bought some from Etsy. Hell, I would be willing to send them to you.
@super_sigma_ Жыл бұрын
Fidgeting Redrawal Syndrome has struck me recently. Good to hear you had that looked at asap!
@santamak2 жыл бұрын
his hands are so big that they make the bugout look like its mini version
@ambulldog1112 жыл бұрын
I will send you an Omega spring free of charge, because of the Hat you are wearing.. GO GIANTS!!!
@FarmerE2 жыл бұрын
It smells like some october baseball this year!!
@cueball9812 жыл бұрын
When the knife bug bites...it bites hard! Got into collecting about 5 months ago and now addicted! LOL!
@FarmerE2 жыл бұрын
Oh, it got me hard!!
@lcm7541 Жыл бұрын
Sorry you had that issue! I’ve had mine for a few years of hard use and I’d like to send it in for a tune up but haven’t gotten around to it yet.
@MrGerardGallegos2 жыл бұрын
That sucks man, I've had zero issues with mine, I have both the basic black one and one with flytanium scales that I bought this year at bladeshow and like you, I fidget with them all the time I'm at home lol and open packages, along with some clothes tags. Hope you can get the omega springs replaced soon!
@33barranch2 жыл бұрын
Still love and carry Benchmade knives but I've probably replaced a half dozen Omega Springs (I have a Griptilian, mini grip, bugout, mini freek).
@ambulldog1112 жыл бұрын
I personally have never broken and Omega spring but I often take one of Omega Springs out so I can pull the access bar back with just my thumb.. that is my next question isn't there to Omega Springs in their you broke both of them?
@ShadowWhippler2 жыл бұрын
damn, my bugout has not had any problems with the omega springs.
@IchNixHabenUsername2 жыл бұрын
i have several benchmades. bugouts, mini bugouts, 940s,.. on every single one of them one or both omega springs broke. and so did the replacement springs. and i'm not giving them any hard use.
@olopezzamora832 жыл бұрын
it didn't came with another omega spring in the package?
@flawseeingeye2 жыл бұрын
things like this made me realize the spyderco shaman is the last knife you will ever need.
@shadeshiest222 жыл бұрын
Lol that thing is a boat anchor…
@flawseeingeye2 жыл бұрын
@@shadeshiest22 heavy? yes. let you down? NO.
@joeydoesthings49552 жыл бұрын
I’m looking forward to your repair video! I’m gonna stick with Spyderco. I have the Delica 4 and the Pacific Salt 2. I want a Para 3 Lightweight.
@kevinlin76742 жыл бұрын
Same thing happened to me during my highschool graduation trip. Had a mini hk axis and the omega spring broke during the first night of the trip. Luckily I had a backup tenacious as well. Never left home without a second knife starting from that day.
@FarmerE2 жыл бұрын
Word!
@IHatchetJack2 жыл бұрын
Same boat. I love Benchmade but absolutely hate the axis lock. Springs break all the time and, until recently, there were no aftermarket springs available. I ditched folders for three years because of this issue and went with small fixed blade instead. I'm moving back to folders now for fun and am getting a Spyderco Shaman mostly because of your videos. Hah. Hope all is well in Norge, man!
@rommelthedesertfox3089 Жыл бұрын
Axis lock is one of the strongest and best locks on the market
@code_6 Жыл бұрын
Yeah, the Omega springs is definitely an Achilles Heel for Benchmade. Omega spring is made from 304 steel. 316 is better in my opinion. That said, it's rare that an Omega spring will fail due to snapping.
@WheatCitySole2 жыл бұрын
3 omega springs broken in the last month. I was so confident it wasn’t a common enough issue to fret about it but here we are.
@SkunkPunch732 жыл бұрын
I feel so gutted for you my friend, they should already come with a spear set of omega springs in the box for the money they charge. But this is just a typical example of a knife loving person’s problem when companies don’t give proper support for every country. Hopefully you get your replacement faster than you got the knife 😘👍
@redastrachan89782 жыл бұрын
Heard about some spring issues, and opted for boring, but sturdy Cold Steel.
@CertifiedSunset2 жыл бұрын
I wonder what he would think of the Ritter Hogue mk1 g2? Same locking system with way better spings and it actually fits in your hand. The Bugout is too small for my hands too.
@J859092662 жыл бұрын
I'm sure it has already been said in the comments many times, but Omega springs can randomly fail at any time. That is the reason I no longer buy knives with this lock type. It happened to me on a BM I owned decades ago, very soon after I bought it. It's a super fun lock to play with, though.
@ts8592 жыл бұрын
Benchmade's quality control has dropped off in the last few years that I have noticed. Sad to see since they are one of the big knife manufacturers that has been around a while. Hopefully they dont fall into the same pit as gerber
@tested1232 жыл бұрын
or leatherman
@tested1232 жыл бұрын
@Cloud do tell
@jd4edc2 жыл бұрын
Man this happened to mine after 2 months. I ordered a replacement set off Amazon that claims to be stronger and picked a back up set just in case. I’ll do updates every 3 months in case you want to see how those are doing. Good luck.
@greengeep2 жыл бұрын
Update us.
@jd4edc2 жыл бұрын
@@greengeep they are still going strong and have not failed. Feel free to sub, I’m planning a long term update video on this one here soon. 👍
@OphielPan2 жыл бұрын
That's why I own 7 Spydercos and 0 Benchmades
@FarmerE2 жыл бұрын
I do like my Spydercos!
@BayouGusto2 жыл бұрын
Bugout? More like "tactical office knife" came close to getting one glad I went with a PM2. 😎👍
@FarmerE2 жыл бұрын
Haha! Would love a Pm2!
@jessedreger84612 жыл бұрын
100% get a pm2 it was my 1st spiderco. I got a benchmade superfreek at the same time, I think the pm2 gets carried 98 days out of a 100 over the superfreek.
@JamesJones-yt8df2 жыл бұрын
My945 just broke a AXIS lock spring... it was only couple months old.. THANKS FOR SHARING.
@sixfootseven2 жыл бұрын
I believe since you're outside the US benchmade will ship you new omega springs, if not there's some Etsy sellers who sell them but I'm not sure if they ship to Norway. Some people also have tutorials on KZfaq on how to make them with guitar wire
@FarmerE2 жыл бұрын
Thank you! Guitar wire would be cool!
@SaltineChips2 жыл бұрын
I grabbed a pack of 20 for $8 off of eBay before
@k9teamzagrebskolazapse1492 жыл бұрын
They will shipped in EU im from Croatia and I bought 940 Osborn and I realy like that knife . And in first 3 month one spring brake and I sent mail to Banchmade and they sent mee a spare Omega spring. And I had it 7 days and one omega spring just broke. So I order feu . But that is not answer.
@JACKBLACKTOSE2 жыл бұрын
Spyderco Native 5 Salt is still my go-to!
@sixgunslingin Жыл бұрын
I have carried A bench made 940 With the exact same Springs for 10 years and beat the hell out of it no problem. That is an unusual situation. Is it fixed?
@Chris-wj4ze Жыл бұрын
I'm not quite sure that I follow this. Aren't there two springs? Did they both break? Not clear from the video.
@hectorrivera66242 жыл бұрын
Love the Bugout. You probably just got a lemon
@LarsRibe2 жыл бұрын
The horror..the horror. A friend of mine has that knife. I liked it on KZfaq, but really don't like it in hand. I have the rather cheap Spyderco Tenacius right now and like it way more than I thought I would! BUT I am interested in trying out that locking mechanism - S.O.G. has their own version and it looks like the right thing for me. The new Flash for instance! I hope you have a nice holiday in spite of your mishap with the Bogout.
@BrentonCarr2 жыл бұрын
I think it's funny they felt the need to make a mini version of this. They should have made an XL instead.
@boristheblade12 Жыл бұрын
And that’s why I love my Spyderco Navajas.
@MicahsRants2 жыл бұрын
Great content brotha 🤙🏽 what’s the update on getting your bugout fixed?
@FarmerE2 жыл бұрын
Thanks, man! I recieved the omega springs, but haven´t gotten around to fix it yet. I will, though!
@lt60777 ай бұрын
Mine went out fast too. I got wolf springs they are definitely higher quality there’s a little more resistance but you get used to it pretty quick.
@CertifiedSunset2 жыл бұрын
I suggest getting a whole little baggie of omega springs just in case, they are so cheap not to have a ton as backup.
@MrLongboarder872 жыл бұрын
You only need to bring one knife when you go on vacation… if it’s a Spyderco.
@sweetdrahthaar79512 жыл бұрын
I can’t bring myself to go very far from home with nothing but a benchmade that has the axis lock.
@inspireonex2 жыл бұрын
Get yourself a big chonkers titanium frame lock ZT and this will never be a problem again.
@lekev0192 жыл бұрын
what a cliffhanger ! hope you ca fix it ! Next time you'll take the spyderco 😉
@chriswolf71692 жыл бұрын
😂😂😂your content is awsome brother ✌🤜💯🤛next time gots ta bring the shaman wootwoot haha hava good one brother U Da Man 👊
@TacticalNorwegian2 жыл бұрын
I got really excited there for a second when you said BladeHQ was shipping to Norway... Panduro might have some wire that will do the job.
@shirtjack28662 жыл бұрын
I will admit that if I was really bugging out, or going to war, I would probably take a pm2 instead of any omega lock knife, BUT when I show my collection to my friends, everyone loves the bugout. People who have zero knowledge of knives beyond the cuttyness just seem to love the blade shape and the feel (g10 and ti... The grivory usually gets the tap test.. what dis?). I carry a bugout to work (construction) most days, when I have pro techs microtechs spydercos, hogues, quiet carrys, we knives, giant mice, trm's and a bunch of budget options. Bugout is a winner, but you have to budget for scales. This puts a new one with titanium scales on the under $200 club, even with extra springs. Android yes, I have extra omega springs, though I have yet to need one since my first *used* mini griptillian found in a field in a park in VT in 2005 (not a denial, just the facts). Easy to carry, lightweight and handsome. I have 4 of em.
@Gramkan2 жыл бұрын
Had omega springs break twice on me in the past, I’ll never buy an axis lock again except for the coil spring variant
@Will-W2 жыл бұрын
spyderco manix ftw :)
@Felix07702 жыл бұрын
Had both my omega springs snap on my all black bugout 2 weeks ago. I feel like there is a manufacture issue. Recently bought an Osbourne mini and its lasting longer. You have a lifetime warranty, use it.