My Cheap and Stupid Fast Mini Bike Engine Swap (Doodle Bug 212cc)

Рет қаралды 30,728

Coles Cars

Күн бұрын

My new Honda threewheeler project: • My New Cheap Honda Thr...

Пікірлер: 86

@puddlerat Жыл бұрын

Hey man just wanted to say thanks 😂 apparently 76% percent of veiws from my doodle bug video are because they came from watching your video

@boostedmk5gti563 4 жыл бұрын

I have a high reving built 212cc on mine it 55mph scary fast lil bike no lie

@chaseprichard8483 4 жыл бұрын

What motor dis u use

@ultimatemonk4162 4 жыл бұрын

Chase Prichard predator 212cc probably

@boostedmk5gti563 3 жыл бұрын

@@ultimatemonk4162 yeah 212 predator with billet rod /flywheel 265 cam with head ported polished milled down 40thou

@froggersgarage5127 3 жыл бұрын

@@boostedmk5gti563 I run a stock 212 with a header a torque converter and 30 tooth rear sprocket and run 54mph

@austinschiff8228 4 жыл бұрын

That laugh after the wheelie😂

@deegan727 3 жыл бұрын

I just fixed a 212 doodlebug for my neighbor. I installed a 212 in my sons mbx10. I thought my sons was a bit of a handful until I test rode my neighbors. That one is geared a little lower plus the overall size and riding position is different so it’s real snappy and wheelie happy. My sons MBX10 the way I have it geared will do wheelies on command but let’s you have more of a controlled launch and tops out at 41MPH with me on it (220#), my son is 77# but he’s too scared to keep it pinned to top out. LOL. One note though, it is worth swapping the clutch and rear sprocket for a 40/41 chain and run a 420 chain on it. It handles the torque better with a lot less stretch so it’ll last longer. I also made my own header that accepts a screw on muffler. I made it from scrap bicycle handle bars, turned out pretty sweet.

@Scriph 2 жыл бұрын

what size clutch and sprocket

@deegan727 2 жыл бұрын

@@Scriph I’ll get back to you on that, I can’t remember for sure. I’ll check tomorrow.

@Scriph 2 жыл бұрын

@@deegan727 ok thank you

@sevenmilewhite1407 2 жыл бұрын

@@deegan727 did tommorow come yet??

@Nico__1997 3 жыл бұрын

I know this is a year old but how did you bend that bar back

@raulpena7809 7 ай бұрын

How did you bend that bar back? So the motor can fit. I don’t want to cut it off

@jordenlucio7342 6 ай бұрын

Is it normal for the chain to scrap the clutch like that? I bought a monster Moto 80 and switched out the engine to a 212 predator of course got a new clutch but mine does scrape like how your did.

@jamesvanderbeek19 3 жыл бұрын

Change the sprocket to a smaller size to get rid of the jump action

@henrygray2678 3 жыл бұрын

She a legend mini

@dronesdirtbikes8097 Ай бұрын

I bought this bike off this dude

@bendillon6985 2 ай бұрын

😂awsome

@chaseprichard8483 4 жыл бұрын

What size motor i have the same one

@benitez5321 4 жыл бұрын

nice shirt

@naturechanel209 4 жыл бұрын

Add q stage one performance kit from go power sports

@Blessedup69 2 жыл бұрын

I’ll buy your doodle bug haha

@dalevasquez983 3 жыл бұрын

Ay what kind of brakes caliper do you have cause I have the mini bike with 212 but the stock brakes are trash I was wondering if you have the hydraulic brakes

@colescars4945 3 жыл бұрын

Nope. Stock brakes. They suck

@calebreeves6567 Жыл бұрын

I have one of these it’s so fun but I’m having chain problems so I can’t ride it

@aic1drew 3 жыл бұрын

Now go stage 1 with a torque converter

@eddieg9060 Жыл бұрын

What size sprocket

@OperatorASF 3 жыл бұрын

How did you do the swap? Was this a direct bolt in swap or? Provide a list of required modifications and such, I’d love to do this with mine

@noahg9565 3 жыл бұрын

He was flying literally

@amalieellis2413 4 жыл бұрын

Add stage performance kit

@nickstartsminibike170 3 жыл бұрын

Looks easier to swap on those vs the monster moto

@eddiesheeran5791 7 ай бұрын

I have put 212's in both frames, there is definitely more room in the DB30. No trimming anything to get proper fitment. I had to trim a small bit of plastic from the stock airbox to get the 212 to fit the 80cc monster moto frame. No riser plates or anything weird on either frame. The engine fits on both stock mount plates.

@destroyer39 3 жыл бұрын

I built this exact same thing, and mine only goes 28 mph top speed. I’m very confused why this is because yours goes much faster, and everything is exactly the same between mine and yours. The only difference that I can notice is that I have an upgraded air filter, and my clutch is not on backwards like you have yours. I’m planning on getting a smaller back sprocket to try to get a higher top speed. Does anyone know why his goes so much faster than mine?

@personhuman8451 2 жыл бұрын

what about your governor is it still on?

@adaofromdiscord 2 жыл бұрын

try removing the international governor very simply plenty of videos and adjusting the external governor also try a 100-80 dollar torque converter if you wanna go a lot faster more torque more speed they have a carb and exhaust kit you can buy that will also make the predator 212 go faster this kit will run you 100 bucks comes with carb , air intake with a dust cover , exhaust, breathers , jets , ect wanna go even faster fix the gearing on the back wheel try a 70 sprocket and more teeth on the clutch

@maxamen7415 3 жыл бұрын

How did you bend the bar behind the motor back

@colescars4945 3 жыл бұрын

I heated up the welds and then hit it backwards with a hammer

@mitchellferre1652 2 жыл бұрын

I can't wait to do this swap ! Will the larger 8hp Predator engine fit inside the chassis ?

@E28_Obsession 2 жыл бұрын

The 420 motor will fit on it but it will take some modifications of the frame to allow it to fit. If you're looking for some more horsepower I would recommend for going to the 212 and then buying a stage 1 or stage 2 kit so that you can get the same if not more horsepower from a smaller motor that will fit easier

@kevinjohnson9372 2 жыл бұрын

Get a 301

@koltonbuchanan4014 3 жыл бұрын

my bike accelerate fast but as i drive it slows down and goes slow i have the predator engine on a 100cc coleman mini bike dose anyone know why?

@cuh_2023 Жыл бұрын

Governor

@1_vuse_2clanyt38 4 жыл бұрын

Yeah I did the same thing

@hynessbruh2065 3 жыл бұрын

I have the same bike u have but a little different

@naturechanel209 4 жыл бұрын

You can legit order all new parts from doodle bug or baha motorsports

@r.i.parthurmorgan5168 4 жыл бұрын

Clint Westwood *baja

@chaseprichard8483 4 жыл бұрын

What the website called

@jameswherewho 3 жыл бұрын

Bruh on a flat road I can get the stock bike to go 35 mph with two people on it

@Mannybrickz 2 жыл бұрын

hows the pickup on that baby!? does it go hard at green lights?

@benbarkey8333 4 жыл бұрын

I have the same mini bike but I want a bigger 212 enigine

@edwardscissorhands7550 3 жыл бұрын

301 or 420

@erikanderson1895 3 жыл бұрын

Depends on your experience with the bike you can make a 212 25 hp but dont recommend with no littel to no experience

@erikanderson1895 3 жыл бұрын

I had stage 2 on a doodle bug my dads 350 plus pounds and he clocked 40

@erikanderson1895 3 жыл бұрын

First thing I suggest is spending 100 $ on bullit conecting rod yes a little steep but it last and you will never have to worry about it

@stevendayoungan9620 4 жыл бұрын

What size the clutch and chain I just got a 212 and have the same mini bike

@colescars4945 4 жыл бұрын

Can't remember the clutch but just look up the size of the output shaft. I just grabbed some size 35 chain from a tractor supply store and cut it to size with an angle grinder

@jeremiahstewart3378 4 жыл бұрын

Did you need to replace the rear sprocket for the swap?

@colescars4945 4 жыл бұрын

Nope

@jeremiahstewart3378 4 жыл бұрын

Did you use ur old chain from the 97cc?

@colescars4945 4 жыл бұрын

@@jeremiahstewart3378 nope. Bought size 35 chain from a parts store and used an angle grinder to gut it to size. The old chain wasn't long enough

@johnhancock8120 4 жыл бұрын

Link to this engine and clutch?

@colescars4945 4 жыл бұрын

Engine is from harbor freight. You can get it for like $100 new if you get a coupon. Cant remember the clutch

@memo6578 3 жыл бұрын

3/4 clutch

@the_goat34bryce Жыл бұрын

Sorry but that is not a doodle bug that is a Coleman cc100x but nice bike tho

@the_goat34bryce Жыл бұрын

I have a fiddle bug as you can tell by my profile

@butchjones615 Жыл бұрын

You look waaay to big for that bike... Lol

@cheetotam6399 2 жыл бұрын

doodoobug

@edgualdino628 3 жыл бұрын

Go power sports has that peg under 10 bucks

@MOE13576 3 жыл бұрын

"powerboats" ha

@edgualdino628 3 жыл бұрын

@@MOE13576 hahaha I missed that lol thats some funny shit

@MOE13576 3 жыл бұрын

@@edgualdino628 hahaha yup

@bagwellpower2951 2 жыл бұрын

Liked and subbed! My dirtbug has gone an 8.60@78+ in the 1/8 still on the stock wheelbase. I have a video on my channel, check it out if you get time. Thanks