Lmao!

Thanks man! I'm still not pleased, and I have build more than 20 mods now. Best advice is of course to keep going, and concentrate on one concept, and make it perfect for you. Great every mistake with positive thought and keep going! I think mosfet is a good place to start. If you want to explore further, look at mechs or PWM, depending if you want to develop on hammer skills or soldering skills. :-)

Thanks Halvor! As I said in the video, I have a lot on my plate these days. And almost enough of this damn fine weather. Very un-Norwgian 😁 Og for at ikke alle trollene skal snappe dette opp, skriver jeg litt på norsk. Mutter'n har fått demens og er helt borte vekk, og fatter'n aner ikke hva han skal gjøre. Det har tatt en del tid å rydde opp i de greiene. Så om det blir stille fra meg så vet du litt mer om årsaken. Kjipe greier, men ikke sant, livet skjer enten du vil det eller ikke. Snakkes!

Morten Oen uff, ja det er triste greier. Jeg har en bestefar som har demens så jeg veit litt om hvordan det er. Ja det været her er nesten for mye av det gode, men vi kan nesten ikke klage heller😁 høsten og vinteren kommer vel før vi aner😒😁 men det var hyggelig med en ny video, og så får du hygge deg med sommer og modding🤔😁 og lykke til med det andre også, så snakkes vi on the next one ✌️😊

Thanks man!

If you watch the World Cup it's amazing how much sanding you can do in 2x45minutes :-)

I don't do football, but I suppose watching formula one would do :)

Ps Would like to mix some resin in some how or stabilizing the wood

Thanks James. I whish I could tell you that everything is ok. It is not. I have family to take care of now, and have to be a little more responisble, and have less fun. It is just the way life is:-)

I know. Not worth it. I'm much better with the tools and metal work now. I'll just make another one:-) And the new 20350 batteries are comming!

Morten Oen Cant wait to se it!!!

It was originally drawn as a 24mm. If the sales go well Cthulhu Mod has talked about making a 24mm version. I would not recommend dual coil RDAs for single battery mods, but it would look cool:-)

Morten Oen you have proved that your air flow experiments are now justified. The Zathog is witchcraft.. The way that the wick and coils don't discolour, and flavour stays is fantastic. :-D

I would leave it be as it is. There are now RDAs out there that do exactly what the filed down DR does.

Thanks brother! An absolutely hidden switch is a dream of mine:-) I of course have a plan for it, so will see what I can do about it in the winter time. My 510's are mostly Fat Daddys, but I'll use anything with a good soldering point on the positive. The copper are almost allways copper tubing from a scrap yard or my dads basement. I no longer use mosfets, only copper plates from 1 to 1,5mm or silver plates (935). The instruments are just passive sensors for what is going on, like old school meets new school. The cool thing is that the last mod in the video could be mass produced and sold for as little as $30, or as expencive as you'd like, only depending of the materials and features of the box. I told you I wanted a parallel mech, and now I have it :-) Norwegian wood rules!

PS: I just received my HOG V4 with the new Valhalla RDA, 4x 21700 :-)

Wow! Awesome!

Hi Veronica! Thanks! I have not tried the Samsungs, but the purple Vapecell 21700 are just incredible! 3000mAh and 35A tested by Battery Mooch. Very low inner resistance.

Ok kwl the gold rap 21700 vapecell are a rerap of the 30t battery 3800mah 30amp batterys .mooch did the test

Thanks Michael! I'll look for it:-)

I'm great, thank you! I'm doing the final touches on my copy of the Langeid Viking war axe :-) I probably will post a picture of it on facebook in a week or two. While vaping, of course;-)

I was well aware of the danger. Just had to see if the mosfets could handle it. They did not!

Hi Morten, I hope I didn't offend you? I just feel I may have from the way you replied. But all that aside, I was thinking how much vape stuff has progressed over the years and little phases from big atties to small to micro etc. and I was putting together designs for an rta which incorporates bits from your zathog, so I must thank you because I probably wouldn't have come up with that double half pipe deck so it basically took that bit and I smashed it together with the qp designs fatality's dual airflow control, but mine has a twist it basically had top/down afc intake that air jets though the left and right sides and the bottom afc controls the centre of the half pipe :) in my head it looks pretty sweet but I'll likely never know as truthfully I'm a nobody on youtube in a certain respect. Do you reckon possible as you've already have contacts and gotten you feet went twice with 2 companies, perhaps incorporate a similar design but obviously have your creative touches? Cheers Morten! :)

Oh and I forgot to mention that the best atomizer for flavour and respectable vapour production out of all my vape stuff which is fairly large now it's got to be the old council of vapour royal hunter mini, just a cheap 22mm wide, 17-18mm in height with a dual coil deck with post holes large enough for most exotics (good for an old atty) and man oh man!! that thing could not be any more reduced with 2 7 wraps 3.5mm framed staples. Just thinking about it, I doubt it'll be your bag as with those "Fraples" it's a pretty damn warm borderline hot vape man, but the flavour I get is so close to eating/drinking those flavour profiles, god!! anyways I'm done, hope this wasn't too boring but if you fell asleep I won't blame you!! Cheers ;P

Hi Chris! It takes a lot more than that to offend me 😀 And if you want to use bits of the Zathog for your own design, it's fine. It was the intention all the time to make progress in air flow management and inspire future designs. Regarding your idea I will need to see some drawings in order to comment on it. The double half pipe was designed for this spesific Zathog air flow. Changing the air flow will result in re-designing the half pipe concept. Send me a PM on facebook with a drawing and I'll look at it. Cheers!

I'm very busy right now. But if something cool shows up I'm there:-)

Thanks Bill. This was just a teaser:-) But be prepared to make many mods before you get something you can use for a long time. I just wanted to show the ammount of work involved in designing something from scratch.

My biggest issue is I really don't have the tools to do any sort of wood working or metal shaping. So it's just cheaper for me to buy the mods than to buy all the tools I would need.

Is that true? OMG :-)

Yes sir! ijoy has the avenger baby dual 20350 on show right now I'm sure it will be out soon.

There are slide shows of it on KZfaq

Any word on how many Amps they can push?

Enes Altınkaya for sure he anti-islam that really tell you something about him

It tells you that I don't like people killing in the name of religion. And that I was somewhat mad about it at the time.

Yea that doesnt look like what you say it is, so i reported this video.

Enes Altınkaya grow up

Racist people always find a justification for his hate. Anders Behring Breivik killed in name of religion and fascism several Norwegian persons, but you have to think in Mohammed.

The mod is a "Melgaard mod". This Norwegian artist use (some of) those lines in his art. He's like a "fuck off"- artist. Just me staying true to his style.