Thanks for the video, installing a similar lift on my truck this weekend and this gave me a lot of great info!
@DieselLegianceАй бұрын
Good luck. I’m installing a Skyjacker 8.5” lift on my 2015 F350 this week. Video will be out next week.
@glennblum64108 ай бұрын
From one yinzer to another your truck is looking good.
@DieselLegiance8 ай бұрын
Thanks 👊🏼
@code10garage948 ай бұрын
Looking good bro👍🏽…but still liked the 6.7…Aloha🤙🏽
@DieselLegiance8 ай бұрын
Thanks bro 👊🏼
@bret97413 ай бұрын
That is a lot of lift. Looks like it’s well made.
@TheGreatestShowman695 ай бұрын
Looks like your rear axle is not longer centered in the wheel wells....PMF Suspension makes centering plates to allow for adjustment.
@darriusmorris69808 ай бұрын
I’m a super huge Ram fan but this truck is 🔥🔥
@DieselLegiance8 ай бұрын
Thanks 🙏
@chadkennedy5295 ай бұрын
Are you from pgh? I think ive seen this truck running around.. i just did a 6" bds 4 link coilover kit on my welding rig... huge pain in the ass.. you made good time on the install for sure! Looks awesome 👌
@DieselLegiance5 ай бұрын
Yes, I live just outside Pittsburgh so you may have seen me.
@TheGreatestShowman694 ай бұрын
There is no way that pitman arm is supposed to be at 200ftlbs. If it’s under 300ftlbs it WILL come loose. Which will give you all sorts it codes, advance track warnings, abs warnings, etc.
@DieselLegiance4 ай бұрын
Correct, I tightened it to over 300ftlb but eventually it did come loose so I replaced the nut with a new one from the dealership with red locktite and it’s good now. If I said 200ftlb in the video that was my mistake.
@480458Ай бұрын
Looks good! I’m thinking about doing this same setup but im afraid it’ll be too high for a daily. How high off the ground are the running boards?
@DieselLegianceАй бұрын
It’s not that bad. I’m tall so it’s not bad for me but wife and kids have to stretch a little lol.
@hankbrown39593 ай бұрын
Did you do anything to compensate for the headlights? I have a 23 F350 with the Striker kit and my headlights are ridiculously out of adjustment.
@DieselLegiance3 ай бұрын
No I didn’t make the adjustment but I’m sure on the back of the actual light there should be an adjustment somewhere.
@user-ke3ze1lx3p8 ай бұрын
What drop hitch you going with?
@DieselLegiance8 ай бұрын
Probably a 12” drop GenY.
@user-pg8yh4mq3b4 ай бұрын
how much does that lift cost?
@DieselLegiance4 ай бұрын
Too dang much in my opinion but around $8k but includes everything including the new extended front driveshaft.
@Cadillaclife20234 ай бұрын
What a POS kit. No instructions, missing hardware, and your front coils are not even straight!, front drive shaft doesn’t use factory hardware… missing brackets and your sway bar is still hitting….all that for $8k 😂… you did a good job though… clearly they threw this kit together just to be the first to have one available!