My first time working with walnut (building an office desk)

Рет қаралды 30,233

2 ай бұрын

In this video, I am building an office desk with a top made of walnut and legs made from ash to which I added some nice strips on the sides and I think they add something special to it. Also, it's my first time working with walnut and I had a great experience with it, above all, this video it's my first video with a voiceover and I am not quite good at it, definitely I need more practice but I hope you enjoy it!
Outro music from: Creator Mix

Пікірлер: 85

@michaelt312 2 ай бұрын

Legitimately, this is my favorite desk of all makers I've seen. Absolutely gorgeous and my style.

@MadebyNiclas 2 ай бұрын

I am glad you like it! Thank you!

@FiaCat7 Ай бұрын

wow, I've never seen anyone use a table saw without a writhing knife or a chop saw without a blade guard. nice job

@MadebyNiclas Ай бұрын

The riving knife on my table saw was crap and flimsy and I had no way to adjust it. It was more dangerous with it than without. The blade I am using has some protection against kickback. The chop saw gas a blade guard, trust me! I don't think you noticed it. Thank you for your concern about my safety!:)

@osamalight 2 ай бұрын

Bold of you to assume that watching a dude cutting wood is boring .. woodworking vids like this became my therapy.. also great job you gained a subscriber

@MadebyNiclas 2 ай бұрын

I am happy that you appreciate what I am doing!! Thank you for your subscription!! :)

@philward2196 Ай бұрын

Great work, really good final finish and all with basic tools. Keep it up Sir, good on you.

@MadebyNiclas Ай бұрын

Thank you! I appreciate it!😁

@tickfarmwoodworks 2 ай бұрын

Niclas, your english is just fine. You have nothing to apologize for.

@MadebyNiclas 2 ай бұрын

Thank you!! I am so glad to hear this!!

@Jack-es9xq Ай бұрын

This gent will be a woodworking Master sooner than later. Subscribed

@MadebyNiclas Ай бұрын

I hope so! Thank you!:)

@josephhfry 2 ай бұрын

You are not the first person to fall in love with walnut. Its a surprise there are any walnut trees left with all of the love the wood gets. Your English is good, anyone who is offended isn't here for the woodworking. My only suggestion is to focus on doing things safely. People less experienced/skilled than you will watch you and emulate what they see, you should take that responsibility seriously and set a good example. That said, its great watching someone do such beautiful work without $10,000+ in tools.

@MadebyNiclas 2 ай бұрын

I am very glad to hear all this! Even if I am experienced this won't guarantee my safety. I note that down and I am looking forward to improve the safety in my workshop. Thank you for your comment!!

@MartyG1957 Ай бұрын

very nice design and build Niclas. I know what you mean about Walnut. I love it too 🙂 You're doing great with your English also

@MadebyNiclas Ай бұрын

Thank you! Yes, walnut is an amazing wood! I am glad you appreciate my English!:)

@kevinwillis6707 Ай бұрын

Looks great man, impressed by how you used limited tools to make a beautiful desk 👍

@MadebyNiclas Ай бұрын

Thank you! I am happy you like it!:)

@caroledubreuildesign1919 2 ай бұрын

Very nice, so creative, thanks for sharing

@MadebyNiclas 2 ай бұрын

Thank you!

@brettroux4691 2 ай бұрын

Very awesome design........

@MadebyNiclas 2 ай бұрын

Thank you!

@roberthahn8555 2 ай бұрын

Amazing work, Niclas! I’m very impressed with what you’ve achieved with the tools you have. You put a lot of other woodworkers to shame, who have invested in “the best” and I feel you are going to inspire many people who wonder if they can do this. Thank you for sharing your passion with us!

@MadebyNiclas 2 ай бұрын

We have to do the best we can with what we have and not limit ourselves to thinking that we need certain things to make great things! This made my day! Thank you, I appreciate it!

@TodaysCraftsmen Ай бұрын

Nice Design! looks great!

@MadebyNiclas Ай бұрын

Thank you! I appreciate it!:)

@melodywilson5255 23 күн бұрын

Beautiful!

@MadebyNiclas 23 күн бұрын

Thank you!:)

@pbjae8140 28 күн бұрын

5:45 use 1-2-3 or 2-4-6 blocks and magnets or clamps for a temporary, movable, kinda secure, fence.

@kiplininman7383 2 ай бұрын

Great Job! Loved how the legs came out. Keep the videos coming! Thanks.

@MadebyNiclas 2 ай бұрын

I am glad to hear this! Thank you!

@WondersWoodworking Ай бұрын

Very very good

@MadebyNiclas Ай бұрын

Thank you!:)

@mariaghinescu7926 2 ай бұрын

Sehr schön.Super!!!

@foresttourer2457 2 ай бұрын

Really nice!!! Great job!

@MadebyNiclas 2 ай бұрын

Thank you!!

@aleksandrshaman462 2 ай бұрын

Молодец. Хорошая работа. На таких больших дырках в древксине я обычно использую эпоксидную смолу с черным красителем. Шпалкевка в таков объеме дакт сильную усадку и со временем трескается. Успехов в работе!

@MadebyNiclas 2 ай бұрын

Thank you! Resin would have been better but I didn't have it at hand at that moment.

@jonathanmasson1382 2 ай бұрын

Thanks for sharing. Great work. And don't sweat (self-critique) your English. You have an impressive mastery of it. Keep up the good work!

@MadebyNiclas 2 ай бұрын

Thank you for your comment! It gives me the motivation to keep going!! I appreciate it!!

@mfcosi 2 ай бұрын

Such a beautiful job. Greetings from São Paulo - Brazil.

@MadebyNiclas 2 ай бұрын

Thank you!

@jimrosson6702 2 ай бұрын

Great job it turned out beautiful love the look of the legs for sure. Keep up the great work can’t wait to see what you do next Sir

@MadebyNiclas 2 ай бұрын

Thank you! I am happy to hear this!

@donaldrobertson4 2 ай бұрын

Nice desk I’m thinking about copying it but maybe put one drawer on it

@MadebyNiclas 2 ай бұрын

Thank you! I am working right now on a small cabinet with 2 drawers which will be placed beneath the desk and I will post the video about it soon on my channel:)

@rickyjohnson8647 2 ай бұрын

Keep up the great work! I enjoyed your video. Thank you!

@MadebyNiclas 2 ай бұрын

Thank you!

@Taguun 2 ай бұрын

Hervorragende Arbeit . Super schöner Tisch 👍🏻 hab dich abonniert.

@BDGKruger Ай бұрын

Awesome workmanship. Keep it up. You are going to have many followers.

@MadebyNiclas Ай бұрын

Thank you! I am glad you like it!

@GlassonDesignStudio 2 ай бұрын

Nice work mate. Your English is very good by the way.

@MadebyNiclas 2 ай бұрын

I am really glad to hear this! Thank you!

@fredanastas7103 2 ай бұрын

Really like the legs, kind of a mission style. Very nice work sir!

@MadebyNiclas 2 ай бұрын

Thank you!

@davidwhite9906 2 ай бұрын

Nice!!!

@johnkendrick8008 2 ай бұрын

Awesome video, great craftsmanship, and a beautiful piece of furniture! I just subscribed and look forward to seeing future content. Your English is good and you're absolutely correct about the extreme sensitivity of society these days.

@MadebyNiclas Ай бұрын

Thank you I am glad you liked the video! I am happy to hear that my English is good because comments like yours are motivating me to keep going! Unfortunately yes, these days people seem to become wicker, especially the young generation. Thank you for watching!:)

@jairsouza7108 2 ай бұрын

Muito bom, parabéns! 🇧🇷

@MadebyNiclas 2 ай бұрын

Thank you!

@SilverSabre 2 ай бұрын

Beautiful work, and your English is great :) Thanks for the video, looking forward to seeing more :)

@MadebyNiclas 2 ай бұрын

I am happy to hear this because it shows me that my English is not as bad as I thought!! Thank you!! I appreciate it!!

@SilverSabre 2 ай бұрын

@@MadebyNiclas you're welcome! And hello from Cape Town, South Africa by the way ❤

@OmiSido 2 ай бұрын

Nice one 🙌

@MadebyNiclas 2 ай бұрын

Thank you!😁

@noosaflooring 2 ай бұрын

Less is more. Beautiful work!

@MadebyNiclas 2 ай бұрын

Thank you!

@hunglikeahamster 2 ай бұрын

A very nice project. I thought the addition of the saw table guide to the board was inspired. I've not seen that elsewhere. One improvement would have been to use mortice and tenon joints on the stiffener instead of lap joints. The way you use the tablesaw is quite dangerous. I suggest that you watch some videos on saw safety. I will subscribe to your channel. Thanks for posting this.

@MadebyNiclas 2 ай бұрын

Thank you! I am glad to hear this! Yes! Mortice and tenon joints would've been better but in my rush to finish the project faster I went with the lap joints! Absolutely! I've acknowledge that from other comments like yours and I am looking forward to improving the safety in my workshop above all! Thank you for watching the video and for your subscription!

@magcolor 2 ай бұрын

👍👍👍👍👍

@Tukangkayu_ae 2 ай бұрын

Pengerjaan yang bagus

@pbjae8140 28 күн бұрын

It is a shame how correct you are that people will troll you just because you have an accent.

@MadebyNiclas 28 күн бұрын

Unfortunately that is true!

@benjaminadorno8574 Ай бұрын

you are a gentleman.

@MadebyNiclas Ай бұрын

Thanks!😁

@PatricesProjects Ай бұрын

Niclas you are getting so close to 1000 subscribers. If you're other videos are as good as this, I can see why.

@MadebyNiclas Ай бұрын

Yeah.. I am surprised about this, I was not expecting so much engagement on this video!:) Hopefully, my next videos will be as good as this one, I am saying hopefully because the viewer is the judge here, I am only putting my best work and see what is happening! Thank you for your comment!:)

@user-um3mn2cr2d 2 ай бұрын

Never apologise for being yourself & I thank you for learning English Because I don’t any Romanian 😂

@MadebyNiclas 2 ай бұрын

Thank you! 😂

@williampenatac9832 20 күн бұрын

Don’t worry about your English big homie.

@MadebyNiclas 19 күн бұрын

Thank you bro!:)

@SergeiPetrov 2 ай бұрын

Use a marking knife.

@MadebyNiclas 2 ай бұрын

I will sure do, it's much more precise!

@wasrados Ай бұрын

greate job! dont think about ather people, always find person who something is wrong, so you should do what you do!!! best regards! im lerning too!! you hawe my sub brother!

@MadebyNiclas Ай бұрын

Thanks brother!:) I appreciate it! Thank you for your subscription and keep learning your English is great to!