22.5" will go right on there. if you need some, pay the shipping and i will send 6 to you. jones performance is very popular. reminds me of a "state park" department truck that made its way to a landscaper. neither would run it in the winter unless plowing snow. most s1900 i have owned were cdl gvwr trucks. odd its a s1900 and hydraulic brakes. not common here. no glow plugs....may have a 120v block heater. seeing no intercooler, hydraulic brakes and the two speed rear, the original dt466 may have been a lower hp like 190 hp or similar. great it has a 210 hp replacement. newer bed than the truck for sure. absolutely fantastic purchase. so very happy for you. look forward to you using this gem!

Can't go wrong with the DT-466! 🙂👍 Great find. Gotta love them binders!

Wow that thing is mint . It's in better shape than my 2011 work truck.

Nice truck. Hope it serves you well

That engine sounds real good! That’s one sweet ride.

That’s a clean truck. Not to many around like that especially in the north east.

You really have a nice find. Congratulations. Looking forward to seeing your plans.

Nice find! Wish u all the best with her ! 😎👍

Congratulations! Cool dump truck!

Out here in Oregon we have a lot of trucks and trailers with the daton wheels and most all the tire shops have aftermarket rim options to work with newer style tires about 100 bucks each for my f700

Just bought mine yesterday. I will male a video about it. It's an 83 and clean as all get out! 37k original miles.

I didn't even know I wanted one of those trucks until now. I have no idea what I'd use it for, but it's definitely cool

The the S series trucks. Some of my favourite. Also love that it has the strobes in the 4 corners of the box. Kind of a rare thing. I know you were talking about replacing them with leds but it might be cool to keep them as strobes. I know you can get a whelen strobe power supply on Ebay for pretty cheap. Just and idea. Again love the truck and can’t wait to see more videos on it

Sweet old dump truck. Very solid.

Sweet dump truck.some good hard cleaning and it will look awesome.

Had a mid 80s one . I regret selling it everyday 😂

Yeah, I think you would have to get a whole new hub for the split rim for the new 1 pice rim with lug nuts. That dt466 is a very good motor, that engine is very sought after for all the heavy duty trucks.

The casino maintenance department i worked for, had an 87 S1900 single axle dump truck we used for major snow storms or any other job we required its services. Good truck. Ours had the automatic transmission in it.

Cool truck! Can't wait to see an on road driving video!

Yes you can put 22.5 wheels on them spoked hubs my c6500 GMC dump truck had 20. and I went to 22.5 and yes 11:20s will fit on it

Nice rig I use to drive a box truck that sat on the same chassis but extended with the same engine it was a 1999 model.

my dream truck as well. Youre right , tons of em around but nothing in my price range! lol . i bought a 1989 f450 with a 460 and 5 speed stick for 2500 put a new clutch in it now its mint. the guy gave up on it after the clutch was slipping. he put new glass, fuel tank, brakes, lines and hoses, efi system re wired etc. good steal for 2500 considering how many new goodies its got. if i were the guy i woulda just done the clutch

Dude this is right awesome.. happy to see you business grow. Set up a patreon or something, I would happily chip in a bit regularly

You have a hydraulic hose rubbing against the prop shaft (drive shaft)

nice, that's gonna be a handy rig

It is in great shape for its age

That thing u found in the tool box might be a pin for the rear tail gate . U tighten it down so u can raise the bed without dumping the load . Also so skid steers can take small amounts of material with the bed raised up and move it around instead of dumping it. It’s a safety thing so box can’t open up and kill someone . We used them when hauling asphalt

I believe that why shaped iron out in the tool box is there to help mount your tire by wedging it underneath and leveraging it up

This is the second truck of yours I'd love to own. Your shortie tow truck and your new dump truck. Dont know what id use them for.

good looking truck

Ok let me see what I can do. I started watching your videos back in about July of last year. Inspired me to push forward with what I've always wanted and that's to run a business similar to what you do. Poured all our savings into building our first truck. Good ole 1989 square body with original 366 motor. One thing you said sticks with me "you can't just take the good you have to be willing to take it all bad included" . Things were off to a rocky start making a name for yourself is far from a walk in the park. Anyway things were moving along until. October 24th 2020 some one thought it a good idea to burn our garage down. All my tools the cars we had started getting and repairing everything. We were lucky to still have our truck dogs and our lives. We live in my brother's basement so everything we had was in that garage and three sheds. It happened on Night we didn't work into the early morning hours. So everything we had put together and saved now gone again. Now it's harder because most our time is cleaning up the massive mess and not on making our business work. However we have not Givin up at times we want to but in our hearts we cant. So I will see what I can get together I appreciate your time sorry to ramble thank you Sincerely, QuaQua Shane Gordon On Thu, Jan 21, 2021, 1:53 AM KZfaq

That’s awesome!

Nice good looking truck

Score! I want the same truck

A boy with a new toy. Looks like it's in good shape.

Just order some 22.5 open dayton rims, then 10r22.5 will definitely go on, 11r22.5 may go on them depending on the clearance in the front. I just had to do the same thing to my 77 GMC C6500 dump truck (GVWR 31500).

That’s a nice truck!

Glad to see you pointer out out to the newbies..... Not to stand in the dead man zone............I will personnel drag ANYONE out of there and yell at them for that........take. Care bud..

Nice truck I noticed that you have a hose rubbing on the drive shaft

good find!

yours is alot cleaner and functioning than mine lmfao

That sure is a nice truck for being that old ! Must have been parked under cover most of its life.

NFH nice score on the dump truck. Just one thing to keep in mine, don’t know How your going to REGS the truck with the state of CT. Farm or regular plates?????????. If your going regular plate,,,anyone driving the truck over 10,000. Needs a Med Card Good luck with things. Take care. Junkmando

I'd put that in the sweet category

Nice truck. Looks solid however regarding the 2 speed diff I was taught to not start the truck moving in high range. Some trucks had a sticker on the dash specifying this. The motor on the 2 speed failed on my truck one night 100miles from home. Had to drive home in low range at 35 mph. Was a long slow trip.

Checkout Matt at Diesel Creek he has almost the identical truck and Wes at Watch Wes Work has done a lot of repairs on DT466's. Good little pick up 👍👍

I changed my hubs and went with 22.5 Alcoa’s and low pro tires. It felt better riding interstate hauling stone. The dt466 is phenomenal. 210hp got the job done, but if you want more out of it you can find a lot of aftermarket parts, it’s a popular engine for pulling trucks/tractors. I still have a 92. It pulled 450hp/1300ftlbs on the dyno after turning up the pump and changing turbos.

That's a good looking truck i'd diver it . Only 4 thing i see wrong like you said a wheel seal flat tire 3rd the inner left fender is gone and a hydraulic line is rubbing on the drive shaft. If i were you i'd look in to an over weight permit it met save you on those oops loads. Yes i have had run in with DMV CT and a Avon cop that does not know what's she talking about that a whole other story. i am a retired trucker OTR and local CT of 40+ years i live in Lebanon CT

Nice truck

If your old tires are 10.00-20 you can switch to 11R22.5’s the only thing you’ll have tkk on switch would be the rims

👍Super👍dump👍truck👍International👍1900👍

300,000 miles Is Just Getting Good & Broke in on Them Engines ...That Should Do 2.5-5 Million Miles With Proper Care & RPM

Now I am jealous

Solid!!

Nice

let’s work it!

I'm assuming since my comment got deleted so quickly I was right. Wasn't trying to blow your spot up, sorry. My grandmother was Pat Norton from that little red house. Was just surprised to find this channel

Nice truck. I would like to have one myself. Did you find it listed online?

Just some rubber weatherstripping and the toolbox is fixed

Nice truck. Do you know the brand the dump cover is?

Trying to figure out what a power can of pee actually is?

I just bought same truck dt466 5spd 2spd. Im in NC mine was a apple farm truck 18ft flatbed dump. Quick question mine is I think the same 22.5 but mine are 20s and has new 22.5s in back Mines 10 bolt rear.

Score!

12:04 ZEZIMA?!? Only Runescape fans will get it

What do you do for work?

How was the test drive

your dt466 looks different than all the ones ive seen. is it a newer style??

The engine looks more like a 5.9 cummins it's not a dt466 7.3 or 6.9 both were in the 8 cylinder version, but great find can we have more videos on the wrecker or a video of you towing something 😁👍🏿

That is a really nice truck! I was wandering, I saw off to the side that you had a dump trailer. How do you like it versus the dump truck?

Does that truck have hydraulic drum brakes front and rear?

Could be a ten speed with a splitter

40 foot mobil home hauler

How much for the 3500

Hi

I have 8 20 tires like new

First?

In Australia..... Were I am ....I'd py 10 k easy for that..... Im looking for a international or dodge .... 68 to 78 will pay 5k$ for it...... You Yankees are so Lucky..... It would cost 5k$ to see that on the road hear.,..... For dot approval......... God bless USA..... I'm on my way soon.........l