My Smart Home Presence Sensor Is Finally Here!
Рет қаралды 140,637
Жыл бұрынThe Everything Presence One is the smart home sensor I always wanted, and it's finally here! Featuring a mmWave sensor for presence, a lightning fast PIR, Temperature and Humidity sensor, Bluetooth Proxy ability, ESP32 and expandability through GPIO. All done with local control and fast response time through ESPHome and Home Assistant - I can't wait for you to get it!
Use code '7SWITCHBOT' for 25% off ALL their products:
SwitchBot Website: www.switch-bot.com/everything...
SwitchBot Amazon UK: amzn.to/3RVmYGy
SwitchBot Amazon US: amzn.to/3SXNlNj
SwitchBot CA: amzn.to/3g5B9eI
Pre-order the EP1 here:
shop.everythingsmart.io/colle...
EP1 Config on GitHub:
github.com/EverythingSmartHom...
Big thanks to John for designing the case, check out his awesome wall tablet mounts for sale:
the3droom.co.uk/
If you'd like to support me and future projects:
Patreon:
/ everythingsmarthome
Buy Me a Coffee:
www.buymeacoffee.com/EverySma...
Written Article:
everythingsmarthome.co.uk/
EVERYWHERE YOU CAN FIND ME:
Everything Smart Home Community Discord:
discord.everythingsmarthome.c...
Newsletter: everythingsmarthome.co.uk/new...
Twitter: / everysmarthome (@EverySmartHome)
Instagram: / everythingsmarthome
Facebook: / everythingsmarthomeoff...
#homeassistant #smarthome
________________________
@TheHookUp Жыл бұрын
Awesome project! I'll definitely be picking one up.
@limecows8470 Жыл бұрын
Can't wait for the review! This thing looks awesome.
@PCBWay Жыл бұрын
there you are ✌
@l0gic23 Жыл бұрын
Looking forward to the review
@SALEHmrx Жыл бұрын
Sold out 🥲 When the next patch will be available? May I mention few suggestions for version 2: * POE, for power and data. * Utilize the spare I/O's to to add IR blasts to make universal IR remote. * Optional case with corner base (to fix the sensor on the room corner). Amazing project and excellent job buddy 👏
@SmartHomeJunkie Жыл бұрын
Yes! I managed to order it. Don't let the shipping costs hold you back. I ordered this together with someone else to save on shipping! Excited to see it arrive and test it. Great work Lewis.
@EverythingSmartHome Жыл бұрын
Nice one Ed, thanks!
@michaelmcelrath1163 Жыл бұрын
How much was shipping to the US? Probably gonna buy one for every room!
@AQHackAQ 7 ай бұрын
Just checked, the shipping fee alone is 70% of the cost of the product (shipping to Malaysia). Absolutely ridiculous.
@dannichols6579 Жыл бұрын
Nice work getting this project built. Sold out in less than four days so clearly a massive amount of demand. Looking forward to receiving mine. Thank you.
@BMWMike Жыл бұрын
Got two on order! They look amazing. Well done to you and your dad for all your hard work.
@EverythingSmartHome Жыл бұрын
Thanks for ordering!
@xxxkahunaxxx Жыл бұрын
please make these available again soon!
@JakeHillion Жыл бұрын
Ordered my 2 the moment I got the email. Very excited to receive it! Thanks again for spending your time making such a great little device.
@stew.c Жыл бұрын
Very much looking forward to receiving mine! Personally I think it’s impressive that you’ve sorted this all out in 5 months!
@EverythingSmartHome Жыл бұрын
Thank you - it's been quick but some of the boring parts seemed to have dragged on. At least those were one off and it's done for the next time!
@zyghom Жыл бұрын
PERFECT! I have made mine very, very similar with minor differences. Of course DIY means that it costs me fraction of yours but yours is now the commercial product! Making it with battery solves the issue of temperature and humidity inaccuracy but when mmwave sensor is in and enabled (that I have done configurable, as well as PIR sensor) the battery life is hugely affected. But still: SUPER NICE! CONGRATULATIONS.
@Sierra-Whisky Жыл бұрын
What an awesome sensor! Very inspiring! I have been walking around with the idea of putting a mmwave sensor in my mailbox to detect unwanted people hanging around near my front door. And now that I know how extremely well it works, this will definitely be my project for the December holidays! 🤓
@rickz6006 Жыл бұрын
Just ordered 2. Congratulations on getting to this point, I hope this inspires you and others to make some more custom gadgets for the rest of us.
@EverythingSmartHome Жыл бұрын
I'm pretty sure it will, keep an eye out for more! 😅
@Nikorasu69 Жыл бұрын
Amazing work, very impressed with the work you put in to it. I truly understand the idea of making the perfect occupancy sensor as they are a vital part of any smart home. Looking forward to follow the progress of this product as I doubt this will be the final revision of it :D Again, fantastic work, real proud of you.
@EverythingSmartHome Жыл бұрын
Thanks so much!
@tomfrank5601 Жыл бұрын
Ordered one this morning! Kudos to Lewis and his dad for doing this!
@robertmorrison363 Жыл бұрын
Amazing... It's fantastic to see someone with so much knowledge happy to share with the Smart Home community. Unfortunately I missed out on this batch but I look forward to seeing what may come next.... keep up the great work...
@EverythingSmartHome Жыл бұрын
Thanks! Hopefully we will have more soon
@BrendanRadich Жыл бұрын
Ordered 3! This is what I've been waiting for. Thank you so much for bringing this to market.
@EverythingSmartHome Жыл бұрын
Thanks for ordering!
@johnlocke_1 Жыл бұрын
Congratulations on the soft launch. I pre-ordered 5 full kits with cases. This will be fun!
@EverythingSmartHome Жыл бұрын
Thank you so much for ordering!
@51av0sh Жыл бұрын
Clean. Ordered mine. After testing I'll be ordering more :) .. One thing I would ask/suggest is to be able to route cable through the back. Would be good to have a notch in the stand so you can pass the wire through it.
@EverythingSmartHome Жыл бұрын
Nice! It's difficult to wire the cable through the stand for integrity reasons but also because it rotates and spins. There is holes through the back of the case which thin wire does passthroigh however
@TommyBrenner Жыл бұрын
What a fantastic device, well done Lewis. I'm really stoked, can't wait to get my hands on them! 😁👏🏻
@denvansanten Жыл бұрын
Tried to order 2 of em. Sold out. Like the project and appreciate the time you put into it
@EverythingSmartHome Жыл бұрын
Thanks and appreciate it, back soon hopefully!
@DankoStojanovic Жыл бұрын
@@EverythingSmartHome Yeah, please try to make more. I would definitely like a couple too
@automationbyrob Жыл бұрын
@@EverythingSmartHome I saw sold out too... tried to use the notify me but just got a white page
@hawks5196 Жыл бұрын
I WANT IT!! Great work on making your own device when it didn’t exist. Love how modular and configurable it is. Please keep up the great work! I hope to be able to catch a module as soon as they come in
@AndrewDanne Жыл бұрын
So darn awesome. Congrats & well done to you, your Dad & support crew. Already ordered x2 for shipment to Australia.
@EverythingSmartHome Жыл бұрын
Thanks so much Andrew!
@FeythFX Жыл бұрын
What a great achievement, thanks for pushing smart homes with your videos and now even hardware!
@EverythingSmartHome Жыл бұрын
Thank you, appreciate it!
@fluqzy Жыл бұрын
Very nice, but 78€ for something that little, i dont know, but still im very impressed about it
@simonturner4168 Жыл бұрын
Many thanks - been wanting something like this for a while! Bought 15, 1 for each room (delivered to Oz). Looking forward to setting them up. Planning to install in Camdenboss CBRS02VGY housing. (Hole for PIR and hole and 10mm acrylic lens for light sensor)
@fentonpower Жыл бұрын
Amazing Lewis. Been following you from the start and I’m super chuffed for your achievements with this product. Bit gutted it’s done so well though as I was going to order but sold out 😞 Any rough idea on ETA for batch 2?
@lukedefeo5407 Жыл бұрын
You’ve absolutely nailed this one, bravo
@sillvvasensei Жыл бұрын
Now do a bed sensor :D
@EverythingSmartHome Жыл бұрын
Haha on it already!
@Kurzei Жыл бұрын
Can't wait for mine to arrive. Also, as an owner of one as well as someone who has seen people have multiple issues with them, there's certainly room for a much better version of the Aqara vibration sensor. If you feel like tackling that of course ; )
@MrDingleberry31 11 ай бұрын
Thanks for putting this together!
@ManchesterTechGuy Жыл бұрын
Managed to order 2 yesterday. Can't wait to set them up. Thank you for creating such an awesome piece of kit.
@EverythingSmartHome Жыл бұрын
🙏🏻
@andymok7945 11 ай бұрын
Just got 2 of them in the mail today. Shipping to Canada was quite quick. Just starting to experiment with one of them now. Thanks.
@somogyvarizoltan Жыл бұрын
Thanks for this amazing project! This is the best sensor atm, it can be a perfect one with a co2 or voc sensor!
@nikitaskyriazis Жыл бұрын
I would love to see a video on how you managed to go from idea to production! Super nice project, I will wait to buy it as soon as it is available again
@EverythingSmartHome Жыл бұрын
We have been planning something like that soon!
@daveacorn782 Жыл бұрын
Darn sold out!! I will be in on the next lot that are being sold!! Excited for this!! Well done!
@pfunkPT Жыл бұрын
POE with power anda data and it's the perfect sensor! Sold out... I'll wait for the next batch! Great work keep it up!
@EverythingSmartHome Жыл бұрын
Thanks!
@spencer10808 Жыл бұрын
Amazing job on this Lewis, thanks for all your hard work and commitment, this is a huge contribution to the community. Also in future versions please consider PoE for power and data, audio, vibration, co2 and voc sensors,. Would any of the existing GPIO be able to accommodate these? and while you’re at it maybe even a physical button/switch for tactile input if that’s not too much to ask 😉 🤞🙃 Also, wondering does the Bluetooth allow for proximity sensor/connection to devices like iPhones and apple watches for increased automations? Home about HomeKit integration as well pretty please. Basically I think we all just want one device to rule them all. So keep up the good work and we look forward to the evolution. Thanks so much!! 🙏
@Travisrogers87 Жыл бұрын
Totally agree with the POE request. Running USB C lines to every corner of my house would be a nightmare - especially when I already have POE lines in many of those locations that I could otherwise tap into
@RyanHaver Жыл бұрын
This is very exciting! I can't wait to buy a bunch of these when they come back in stock.
@LoadsofBacon Жыл бұрын
I preordered mine about 10 hours ago … I’m really looking forward to this!
@thhaubi Жыл бұрын
Amazing! Can't wait that the parts arrive!!!
@EverythingSmartHome Жыл бұрын
Me either!
@ronaldweiler3190 Жыл бұрын
Was just pointed to this - want to order 2 or 3 of these as SOON as they are available! This looks AMAZING!
@somewhereinoklahoma5574 Жыл бұрын
My units arrived this morning! I’m excited to get it set up!
@wickedcoyote271 Жыл бұрын
Wow, when I ordered my 4, I thought you would just provide the esphome config that we would have to copy in and flash. It’s easy, so didn’t think much of it. You went above and beyond, and I can’t wait to get them. I see they are already sold out, so I hope there will be a wave 2 as I’m sure I’ll want more.
@tucci1 Жыл бұрын
Cannot wait for this order ! Great Job Lewis
@kattz753 Жыл бұрын
I love the design. Buy what you need, skip what you don't, easily add functionality later. It would be great if a few more makers developed devices made to work with Home Assistant. It was the hardware that scared me off the first time that I looked at HA. What worked and what didn't all seemed so confusing.
@lazerdave466 Жыл бұрын
Been looking forward to this! Preordered one. If it's as great as it sounds, there'll be more orders soon after.
@snives7166 Жыл бұрын
Looks fantastic! I personally do what I can to avoid adding WiFi devices, but it's definitely the way to get this going as a saleable product. I've been debating making up my own similar multisensor using PoE. Once these are more readily available I may snag a couple to toss in with a Yellow as a smart home starter to give as a house warming gift 😃.
@spencer10808 Жыл бұрын
My thoughts and feelings exactly, @Everythingsmarthome please consider making a PoE version in the future!
@robinryf5 Жыл бұрын
Of course not everybody has Ethernet available to plug in these sensors. But it would be great to also have the option for a completely hardwired version (PoE).
@Kiloptero Жыл бұрын
its even zigbee?
@adamjj85 Жыл бұрын
Congrats Lewis! This is truly the ultimate sensor! Love to see Bluetooth! PS. It looks like the notify me button on the order page is not working.
@smartrev Жыл бұрын
Nice work any yes i order it for the german community for testing ;-) Can´t wait and congrat again^^
@kksligh Жыл бұрын
This will replace so many devices! Love it! 4 in route and hopefully more after some tinkering of course!
@EverythingSmartHome Жыл бұрын
Excellent - thank you!
@junkins Жыл бұрын
Very nice! Congrats. I'll be preordering today!!
@EverythingSmartHome Жыл бұрын
Cheers Jamie!
@troyjl Жыл бұрын
Looks great cant wait to order one. I'd love to see the sensor replace my alarms PIR using the 12v cable with hardwired inputs for PIR and presence detection. I like having my legacy alarm as a backup in the event the smarthome controller fails.
@gazgadgets Жыл бұрын
Well done on the project.
@valtek1959 Жыл бұрын
Great job Lewis, tried ordering, on the notification list.🤞
@RAN5ON Жыл бұрын
Been itching to see a video on this since I ordered my sensors on Monday! 😁
@EverythingSmartHome Жыл бұрын
Awesome! 🙌
@MatTeague Жыл бұрын
Just preordered my full kit with case 🎉. Soooo excited!
@EverythingSmartHome Жыл бұрын
Me too!! 🎉
@MarkGhali Жыл бұрын
Seriously Lewis! Amazing work!
@EverythingSmartHome Жыл бұрын
Cheers Mark!
@user-jm8ho2hy8g Жыл бұрын
Amazing. Just ordered 5 of them. Can't wait to set these up
@EverythingSmartHome Жыл бұрын
Nice, enjoy when you get them!
@andyl2895 Жыл бұрын
Installation routine looks very smooth compared to what I'm used to from ESPHome, really looking forward to it
@EverythingSmartHome Жыл бұрын
Very very easy with ESPHome! 🎉
@ryandetzel848 Жыл бұрын
Great work, I think the community needs more of this to help drive it forward. Sure we can hack together systems with various technologies but a large portion of users use home assistant and are comfortable with esp hardware and hacking.
@EverythingSmartHome Жыл бұрын
Thanks Ryan!!
@HanZie82 Жыл бұрын
Oh man this is great. Finally some motion sensing thats more fit for this century. Ima save up right now for when they back in stock.
@CamFromOz 11 ай бұрын
Love it, great piece of tech. Highly recommended!
@robkarpati Жыл бұрын
Awesome. Congratulation!
@Nuuki9 Жыл бұрын
Already ordered one. Congrats!
@EverythingSmartHome Жыл бұрын
Thanks Richard
@codywetzel112 Жыл бұрын
Congrats sir. Well done.
@EverythingSmartHome Жыл бұрын
Thanks Cody!
@NSHarrison Жыл бұрын
Love this project. Bummed I missed out for now. Maybe I'll get lucky in the future. I'm curious how this sensor performs in a bathroom environment with steam & glass shower screens. My regular Xiaomi ZigBee pir sensors are great but detect movement through glass.
@SuperLupin777 Жыл бұрын
Wow, already sold out! I'll definitely buy one once they'll be available again. Congratulations on this great achievement!
@EverythingSmartHome Жыл бұрын
Thanks!!
@BillsCountrysideAdventures Жыл бұрын
Great well done mate
@garyingle7440 Жыл бұрын
I hope more become available - I’d love some of these
@ChrisUngerVball Жыл бұрын
Great work. doing my best to get a number ordered, just in time for the holidays.
@EverythingSmartHome Жыл бұрын
Thanks Chris!
@yoch4922 Жыл бұрын
Great job. That's what we need. All in one. Just one question. Can you modify the case for integrate a battery 9V?
@Raymond.Jansen Жыл бұрын
Great project, thank you for this. Can't wait to try it!
@EverythingSmartHome Жыл бұрын
Thanks Raymond
@joshcliffejones Жыл бұрын
Awesome work Lewis! Naturally i had to order one to both test out and support your cause! This shall be replacing the DIY version of this sensor in my office, allowing me to move the DIY one to another room :) Really looking forward to see what you come up with next!
@EverythingSmartHome Жыл бұрын
Thanks for ordering Josh! How's your DIY one been going so far?
@joshcliffejones Жыл бұрын
Its been spot on thanks! So much better than the PIR sensor i was using before given that it can accurately detect whether someone is sitting in there without having to wave their arms about every 5 minutes! :)
@JoshuaSaundersAtLarge Жыл бұрын
Sold out. Awesome for you, not awesome for me. Looking forward to more coming, it's priced well definitely want a few!
@simon0a0aubry Жыл бұрын
Great job. You give the courage to build my own multisensors but I have a little different approach. I want to have the door/window detection and the mmwave is excellent but to expensive. I want to put this multisensors in many rooms so I need to keep it cheap.
@EverythingSmartHome Жыл бұрын
Good luck with it!
@MrDead1975 Жыл бұрын
ready to order when the next batch is available
@adieognira9709 Жыл бұрын
Can't wait for batch 2. hope you can share the ETA. thanks!
@hamishadamson4628 Жыл бұрын
I hope these become available again! I'd like to get my hands on at least two.
@GauravVermaGoogle Жыл бұрын
Very impressed by your work mate. I need this for my bathroom also to control my exhaust fan (apart from lights and music). Is it safe to us this in the might humidity area? Is there some treatment/spray that I can do to make it usable in the bathroom?
@zooloo73 Жыл бұрын
Ordered two sets two days ago. Really looking forward to getting them.
@EverythingSmartHome Жыл бұрын
I'm looking forward to sending you them!
@DementedDog Жыл бұрын
Got mine. Found your setup vid. All up and running and in HomeAssistant in less than 5 mins! Brilliant 🙂 Now the fun starts.
@EverythingSmartHome Жыл бұрын
That was quick!
@DementedDog Жыл бұрын
@@EverythingSmartHome Never thought of scanning the code - Durr!
@DementedDog Жыл бұрын
@@EverythingSmartHome Do we know how accurate the temperature sensor is please? Just asking as my Hue motion sensors are at least 2 degrees out.
@EverythingSmartHome Жыл бұрын
Check the description of the product, there was a detailed paragraph on the website. Basically you can adjust the offset in the code to make it match other sensors. Have a Google for shtc3 Vs BME280 and you'll find a website that tests a bunch of them - basically the conclusion is that all temperature sensors report different values
@DementedDog Жыл бұрын
@@EverythingSmartHome Thank you - will do. I know the Hue ones are out so it's not vital.
@BotanicalBob124 Жыл бұрын
This is everything i've wanted to in a smart sensor my orders in. nice work.
@EverythingSmartHome Жыл бұрын
Thanks Gary!
@DarkRehabOfficial Жыл бұрын
I really love your work! I will order asap 😍
@EverythingSmartHome Жыл бұрын
Thanks 🙏
@1ucky1337 Жыл бұрын
Nice work, I hope this is the first idea of many to become a reality! I'll be getting a few of these.
@EverythingSmartHome Жыл бұрын
Thanks - me too!
@607AAG Жыл бұрын
Hoping more will be available. I’ll purchase one for every room!
@DementedDog Жыл бұрын
Ordered, and very excited. Will order more once I’ve got the hang of the first one. Now, let’s talk,about an outdoor version……❤
@EverythingSmartHome Жыл бұрын
Haha let me get this one out first 👀😂
@EverythingSmartHome Жыл бұрын
Scan the QR code on the box :) assembly is very minimal
@eladleviisrael Жыл бұрын
It looks amazing! thank you Lewis for creating it. I am probably going to order a few of them. my only wish is that it also had an illuminance sensor.
@PranavRam Жыл бұрын
It does!
@eladleviisrael Жыл бұрын
@@PranavRam you are right! don't know how I missed it.
@ladonizer Жыл бұрын
Ordered one. Currently have 4 Aqara FP1 devices. 2 work perfectly. Another one works in most situations and one, unfortunately, never stops detecting occupancy. I have high hopes your device will replace that last one perfectly. I will also be able to remove the pir i have in that room. To be able to turn my lights on and off with one device is a big plus. If it works the way i hope i might be ordering more in the future!
@EverythingSmartHome Жыл бұрын
Awesome, hope you like them as much as I do!
@adijgraham Жыл бұрын
Great work buddy!
@EverythingSmartHome Жыл бұрын
Thanks!
@gianlucagalli6491 Жыл бұрын
Awesome product! 🔥🔥 I'd like to see a Ethernet (PoE?) version in the future. Also, a wall plate design would be cool (it could be open sourced allowing community members to easily design ones fitting their country standards)
@EverythingSmartHome Жыл бұрын
PoE is definitely something we are looking at :)
@spencer10808 Жыл бұрын
Yes please!! This would make it perfect!
@quelsii Жыл бұрын
I'd love to see you selling (or maybe just uploading ;) ) the files for the case to print ourselves! Great project though! Can't wait to get one myself.
@ThomasCouey Жыл бұрын
Is the PCB open hardware? Can I get the schematic?
@crisdeguzman8786 Жыл бұрын
Amazing project! I love to have this on hand but already sold out… when it would be available again?
@1dunas Жыл бұрын
First of all, awesome work. I really enjoy watching the channel. The sensor is really great and I build it myself based on your recos. I really wanted to order but I habe to admit that the shipping stopped me. Of course this wasn’t your main focus so I hope you will find ways to reduce shipping to a reasonable price. Still thank you very much for your work! I like your attitude of enabling others over maximizing revenue. Cheers
@EverythingSmartHome Жыл бұрын
Thanks! If I had the power to reduce shipping for everyone then I would absolutely do it - shipping sucks right now
@jumbleblue Жыл бұрын
I'll wait for the zigbee version. Really want to have as little smarthome tech as possible to be dependent on wifi running.
@Stephen-ul2vu Жыл бұрын
Ordered 2 within 5 mins of the anouncement on discord. Can't wait to get them my current PIR senors are driving me nuts. As for future projects I would really like a ready to go out of the box smart speaker for Home Assistant. Plus one with a screen the size of the google nest hub that could show dashboards without needing to cast them with media player would be amazing. Alternativly a keyfob like the smasung smart things one would be cool to for detecting if you have arrived home and left rather then need to use the mobile app geo-fence detection.
@ThingEngineer Жыл бұрын
That’s so awesome! But how well does it work in real world scenario? Are you going to do a demo video? I’m just asking because I’ve played with a lot of millimeterwave sensors and just know how finicky some of them can be.
@kevin4rsl Жыл бұрын
Love it. Congratulations. Can't wait to get a hold of one. Would i be able to ship to Trinidad and Tobago? As well as my skybox in Miami?
@louisviciedo Жыл бұрын
Thanks for all of your hard work on this project! Looking forward to receiving mine in November. Will the occupancy sensor show up in Alarmo as a sensor?
@EverythingSmartHome Жыл бұрын
Should do yep!
@d5kenn Жыл бұрын
This is so exciting. I ordered three of these on Day 1, really looking forward to using these. Thanks for being so clear in this video about how the occupancy and timeouts work, Lewis. Is there a reason you recommend the 60-second occupancy timeout? On my FP1/P1 setups, I try for the fastest de-occupancy I can get, so that the lights they control will operate in near real time--I'm not really keen on having the lights linger for up to 1.5min before they turn off. Are you finding false negatives or lights turning off while you're still in the room? Congrats on the launch of the Everything Presence One!
@EverythingSmartHome Жыл бұрын
Awesome! It's totally up to you and you can control it however you want - I think personally 60s for occupancy works well and reduces the potential for any false positives while still being very fast - I don't think I'd want the lights turning off within 2s of leaving the room incase I'm coming back - but again, entirely up to you and that's the beauty of this 😅
@CliffUlrich Жыл бұрын
How are you testing each unit manufactured to ensure they’re assembled correctly? Manually or bed of nails?
KPeyanski
Рет қаралды 15 М.
Jimmy Tries World
Рет қаралды 881 М.
Everything Smart Home
Рет қаралды 106 М.
Sameer Gaming
Рет қаралды 3,3 МЛН
Buy Smart┃Магазин ноутбуков
Рет қаралды 255 М.