Smart Motion Lights: AVOID these mistakes!

Рет қаралды 292,877

Күн бұрын

Motion automated lights make life SO easy, but they can be a headache to set up perfectly. I'll show you common mistakes so you know what to avoid!
Dumb motion sensor switch: amzn.to/41oUESR
Philips Hue motion sensor: amzn.to/3b9nzBN
Aqara motion sensor: amzn.to/3Zlegp3
HomeSeer HSM200 motion sensor: amzn.to/2QZv4Vc
Everything Presence One sensor: shop.everythingsmart.io/en-us...
Amazon Echo Dot 5: amzn.to/3IDmHpg
Lutron Caseta: amzn.to/3c2Ec5F
Kasa dimmer switch: amzn.to/3ZngSmi
Withings sleep sensor: amzn.to/3Zge2j0
(affiliate links)
DISCOVER MORE
Second channel video: • Level Up Motion Lights...
Motion Activated Light Strips: • Motion Activated Light...
This Sensor Blew My Mind! mmWave: • This Smart Home Sensor...
Ultimate Guide to Smart Home Sensors: • Ultimate Guide to Smar...
FOLLOW ME
Subscribe to Smart Home Solver: bit.ly/3joO1dZ
Subscribe to Reed's Smart Home: bit.ly/3EulO02
Twitter: / smarthomesolver
Instagram: / smarthomesolver
TikTok: / smarthomesolver
0:00 Intro
0:26 Dumb motion light in bedroom
1:30 Left in the dark
3:11 Fading the lights is ideal
3:44 Multiple sensors
4:16 Sensor position
4:51 Time of day
5:42 Keep the lights off
6:37 Physical button
6:57 Worth the effort?
7:35 Stare down
---------
MUSIC
Digifunk by DivKid
The End by EVA
open.spotify.com/artist/6UIs5...

Пікірлер: 202

@SmartHomeSolver Жыл бұрын

Here's the other video, where I show how I set up some of the motion light automations: kzfaq.info/get/bejne/Z991ncRpqLKRZas.html

@donoban19 5 ай бұрын

I have the same black control for the Ceeling fan, I will like to know how to do that fan smart, or at least the LED light.

@Viewer765 10 күн бұрын

Eve mention sucks automation never works

@shubinternet Жыл бұрын

So, the thing I love about this channel is the involvement you get with your family. I think that really helps make it more authentic.

@SmartHomeHASHTAGS Жыл бұрын

It was high noon ...or high midnight in this case.

@PoisonWaffle3 Жыл бұрын

Another great video, Reed! One thing that works really well for bathrooms is "wasp in a box" logic. If the motion sensor has been triggered and the door is closed, someone is definitely still in there and needs the lights on (even if they're sitting on the toilet watching KZfaq videos). So configure the automation to only turn off the lights if the motion sensor is clear and the door is open.

@Admiralfeb Жыл бұрын

I'm about to do that. I already have a motion sensor in there, but it's currently disabled because I don't have the door sensor

@jeisonsanchez4842 Жыл бұрын

Unfortunately, not all family members believe in closing the door. I would need a toilet seat sensor as well.

@mikosoft Жыл бұрын

The problem is when it's just me and my wife we don't close the toilet door because our cat has it's litterbox and food there and he likes to do his stuff when we do. I had to abandon the wasp in a box concept even though it's a very compelling one

@bragi1 Жыл бұрын

@@jeisonsanchez4842 I have a toilet seat sensor for just this reason. I attached an open close sensor to the toilet lid. It works as long as everyone closes the lid after they're finished.

@SmartHomeSolver Жыл бұрын

Great idea!

@ecoheliguy Жыл бұрын

One thing I find super helpful is to always automate with odd numbers that people wouldn’t use. Like 99%, 49%, 1% ect for things like brightness or blind level. This way the Automation can check if the current state was automated and can continue to adjust. But if someone has set the lights in the kitchen to 100%, the automation doesn’t adjust those lights. Or if someone mid day closed their blinds fully, the automation don’t then open them. Then nightly at 2am I have an automation that resets things in the house back to an automated position, any blind that is set to 100% motors to 99% or if at 0% adjusts to 1% (not even audible). Any lights that are still on get turned off, fans set back to a desirable state, ect.

@bluesparrow2645 Жыл бұрын

I have been doing this for the last 10 years. Unfortunately, no smart hub or smart device manufacturer has come up with a solution yet.

@inelonwetrust9169 Жыл бұрын

Really enjoyed this video Reed. Always love the incorporating of your wife and her reactions.

@pailryder12 Жыл бұрын

love your videos. always some great ideas and i like how you walk through lessons you learned. keep it up!

@wayneperryman4146 Жыл бұрын

You covered all the issues I've faced and addressed. I have also added a pre arm state so when walking past certain rooms in the right conditions the next room will light up 50% of what the current target brightness for 5 seconds and then either turns off with no confirmed motion or go to the target brightness (and colour) with confirmed motion. Also when the delayed turning off I have made it go to 50% brightness for 30 seconds before fading to off to give ample time to move a bit more. I'm currently in the process of installing espresense onto mant esp32s and will have one in the roof space above each room to further add to the functionality.

@jrm523 7 ай бұрын

Love it! Thanks for the tips!

@S2580ss Жыл бұрын

Great video. The tip to fade the light first is excellent

@Vlican Жыл бұрын

great list! i've learned most of these myself over the years of home automation, but this can help newcomers!!

@morells09 Жыл бұрын

1:07 another problem I found with these Lutron motion sensors is that a) some models don’t have an ambient light sensor so will turn on even during the day and b) glass shower doors seem to reflect the IR sensors so even though the switch is facing into the bathroom, people walking by while the door is open can trigger the lights

@MrDead1975 Жыл бұрын

my biggest improvement was binning all my sonoff PIR sensors and using mm wave sensors instead (Tuya zy-m100). For the beds im using load cells for bed presence detection preventing the lights coming on if someone's in bed

@rainbowevil Жыл бұрын

What about when you stick a load of things on the bed though, which I’m very liable to do…

@rossjaniceourhouse8852 Жыл бұрын

Exactly the ZY-M100 is amazing.

@jaredgudnason4400 Жыл бұрын

using timer helpers really helps. motion events just reset the timer, and the timer finish is what turns the lights off. makes it very easy to have multiple events which can reset the timer.

@MaxPower-11 7 ай бұрын

I’ve been using the WiZ SpaceSense feature in a bedroom for a couple of weeks… so far so good. There is one WiZ bulb each in two floorstanding fixtures, spaced across the room from each other.

@JasonRaneses Жыл бұрын

The humor in your videos is a breath of fresh air. Love the channel.

@mmmikeyyy Жыл бұрын

I have motion sensors in my bedroom and it’s perfect. I have two motion sensors. One looking at the whole room, and one installed under a piece of furniture, able to see only at floor level. At night, only the one at floor level turns on the light, at 15% intensity. The light remains on for about 15 seconds after both sensors see no motion (so one sensor is used to turn light on, but both keep the light on afterwards). Motion in the bed during the night has never turned on the light. During the day, both sensors turn on the light at 100% intensity. One could wonder why not use a floor-level sensor only. It's because it's difficult to scan the whole room at floor level with furniture in the way.

@FreDePeuter Жыл бұрын

@@TyDaSpace Read @mmmikeyyy 's post properly instead of trying to plug your channel. His idea for a floor sensor is great in the bedroom :)

@TyDaSpace Жыл бұрын

@@FreDePeuter I simply suggested an alternative method to accomplish the same thing without using two sensors. You can take it or leave it. If it doesn't help you I'm sure some other people who want to accomplish something similar will find it useful.

@FreDePeuter Жыл бұрын

@@TyDaSpace Please do tell, how do you accomplish having your bedroom lights turning on *only* when you're getting out of bed at night, and not when you're just being active in bed? With just one room sensor....

@TyDaSpace Жыл бұрын

@@FreDePeuter having just the single sensor next to the bed. When motion is detected after bedtime i.e getting up from bed, only turn on the low light. Any other time, turn on whatever light you want. You can combine it with your TV(if you have a smart tv or smart plug) in the room as well or contact sensor on your bedroom door. So many other ways to instead of wasting it on two sensors. I don't know about you but I'd rather spend less for more. If 2 sensor is what works for you then by all means but two motion sensor. As I said in my previous post, I was offering an alternative solution so I'm not sure why you are on the offensive side. Calm your tits.

@FreDePeuter Жыл бұрын

@@TyDaSpace I think you're not getting the concept the original post.... Not being offensive, just got annoyed at your plug for your channel posting on someone's concept that you didn't grasp. My tits are fine thankyouverymuch ✌

@matts1978 Жыл бұрын

Omg..last 10 seconds!! The best!

@BrandonDoyleMN Жыл бұрын

Great advice, thanks!

@jst_josh_n Жыл бұрын

Great Vid! I had to disable all my motion automations because I failed to share with my in-laws and they thought we had ghosts 😂

@EsotericArctos Жыл бұрын

Automation Kill Switches are something several automaters have mentioned, and they are a life saver when you live with other people. Sometimes automations just don't work that well when you have visitors and you need to have that kill switch

@user-rd9kb6ox1v 10 ай бұрын

Great tips!! Thanks for the info...

@soubhikkhan6239 Жыл бұрын

I loved the war of stare at the end :p i totally feel it bro! Great video, it resonates so well with some of things i did for my use cases.. For the living room lights I use Chromecast state to check if the TV is running instead of energy monitoring plug.

@KrastyoKrastev Жыл бұрын

Awesome video as always. I need to purchase dimmable light soon. Also i have made "dumb /fake" lights and once I say "I am cooking" it turns on the fake light in the kitchen and as long its on - the real lights will never go off automatically. They can be turned off manually with the switch or by saying "I am done cooking"

@aoneaone5206 3 ай бұрын

Nice info, great final 😂

@AndereRickert Жыл бұрын

A mistake I made was not putting motion sensors up to the seeling (using Phillips Hue btw). This works amazing and the angles are the best, it's practically 360° view.

@PiyushNikam 7 ай бұрын

I love how americans also make spelling mistakes

@brendanm720 Жыл бұрын

I find that PIR motion sensors seem to work best on the ceiling in the middle-ish of the room. That way you're always walking across it. It's not usually practical to do this, however.

@Sparky_D Жыл бұрын

Having different light-off delays is a great idea I've been meaning to implement for a while. In Home Assistant you can achieve this in a single automation using the choose: action

@EsotericArctos Жыл бұрын

With my motion lights in some areas, I saw something setup in a work place that I just thougth was a little bit cool, so I did the same thing at home. instead of turning straight off, they dim to about half brightness, then will turn off another 2 minutes after that. It had the added bonus of adding that time where I can move to reactivate full brightness, but I just did it because I thought it was a cool effect :).

@hubertlukose3982 10 ай бұрын

Nice video, very humorously done, like the ending LOL:)

@976rossl5 Жыл бұрын

YoLink Smart Outdoor Motion Detector I've put these in my (long) driveway. And they work fantastic. So when delivery/guest/coming home at night. I have them turn all the front/driveway/porch/garage accent ,etc turn on to full brightness for 12 minutes. Then go back to normal state for the time/scheduled before.

@ronm6585 Жыл бұрын

Thanks Reed.

@onlyzach1 Жыл бұрын

Great video! So my problem is setting this up for certain people, mainly me and a roommate. We both have iPhone's and Apple Watches, can this be done with geofencing?

@TiagoRamosVideos Жыл бұрын

The ending 🤣👌

@FightingNavyman 8 ай бұрын

so with motion sensors and smartlightbulbs. do you leave the switch on? doesnt the electric bill go up by having the lightswitch on but the bulbs are off?

@evan Жыл бұрын

I have the most convoluted set of scenes for my bathroom automations using dummy switches but it now works 100% of the time. Very satisfying when you finally sort out all the embarrassing… lights off or on scenarios

@namannik Жыл бұрын

Reed, have you tried adding your hallway and garage motion sensors to binary sensor groups in Home Assistant? This can simplify your automations for those two areas while achieving the same effect you described in the video. I’ve done this in a couple places in my home and it works great.

@amramp2625 Жыл бұрын

How would one go about this exactly?

@namannik Жыл бұрын

@@amramp2625 In Home Assistant, navigate to Settings > Devices & Services > Helpers. Then click "Create Helper", choose the "Group" option, and then choose "Binary sensor group". In the "Members" section of that window, add all the motion sensors you want to include in the group.

@amramp2625 Жыл бұрын

@@namannik You are a scholar and a legend. Thank you, Alan!

@grg2106 Жыл бұрын

@@namannik Sorry to ask such a novice question, but what should the automation look like once you have created that Group. I have three motion sensors in my garage and I have never been able to figure out how to get them to work together!

@namannik Жыл бұрын

@@grg2106 In your automation, use a State trigger. In the State trigger, for the Entity, choose the group you created. Depending on what the automation does, you'll probably want to choose either "On" or "Off" in the "To" drop-down menu. (On = motion was detected, Off = no motion was detected)

@Stephen-Jones Жыл бұрын

Lights turning on due to motion is the best thing I ever setup. I actually forgot how useful it was until I went to my parent's place and kept forgetting they didn't have smart lighting and I had to find the light switch 🤣 Not watched the 2nd channel vid yet, but ideally you don't want to use the delay in the automation to turn off the lights, as it doesn't survive well if the home assistant is rebooted/network blip. I've started using a timer (and the event when it elapses) instead to better ensure it turns off when it should.

@HuskyRides Жыл бұрын

I use Smartthings and the multiple sensor one is a great tip ; i use it for my stairs and the light never goes out on "accident" anymore. If "both" sensors detect no motion anymore for 2 minutes the lights turn off. Perhaps another tip is "do not use a motion sensor" .. in some cases a open/close sensor can be more suitable.. For example that pantry you have; if the door is open the light is on. And if it's closed it turns off after 2-3 minutes.

@vaderaguk Жыл бұрын

Oh man, the number of times my wife has moaned about the motion lights. But the she gets used to them and moans when I fix them 😂 It's a lose-lose situation

@GeekGarageDK Жыл бұрын

something many forget, in my experience, is PIR and pets, it can drive you nuts if you don't use conditions. My cat loved to go to the kitchen, just to turn the light on, not kidding, and then he walked out super proud. So now, the kitchen light can only be turned on if some other parameter is met like a light in my living room is on or special time of day and so on

@rrassoc Жыл бұрын

My garage lights automation failed to understand when I was working under my car, which is not a good instance to automatically turn off the lights. So, I added an NFC tag to toggle the automation off or back on. That was a tricky but fun addition to the system. The NFC tag is essentially a virtual switch. I believe I'll be replicating the functionality in my bathroom and elsewhere using a button, or more likely a Zooz ZEN34 remote controller, which can be added right next to the wall switch, like you can with the Caseta Pico remote.

@brendanm720 Жыл бұрын

I've done something like this with the Timer in the laundry room. We don't have motion sensors in there, and I didn't want everyone to leave the light on, so I set up a 10 Minute timer with an override. A long press of the switch will disable the timer, and then it will re-enable the timer when the light is manually turned off. Generally, 10 Minutes is long enough to do what needs doing in there -- but the option is there if we need it. (I think I'm the only one who uses it, TBH)

@javierolayo744 Жыл бұрын

what bulbs do you use for your dimmable switches?

@Junkboy888 3 ай бұрын

Great video. My Dad installed a Motion censor at the top of the star case going up. It just controls two small wall sconces at the top of the steps going to the left and right room. the lights comes on and off before you get to the top. Not sure what he was thinking or why he did not put in two way switch in the staircase. Gonna try a some smart witches beceuse I can get a light in to hallway using wires there and I can get access to light switches at the bottom and one up top in the bed room. For now I just gonna put in a batter LED MC light.

@waynejennings9536 Жыл бұрын

Great video. I’m trying to put motion sensor lights in my kitchen. Yours seem to work pretty well. What would you recommend?

@SmartHomeSolver Жыл бұрын

I'm still using all these kzfaq.info/get/bejne/o8Vnn7h32Zy9f30.html the one sensor I didn't include in that video is the Aqara motion sensor and that works great too.

@rrsttt7505 Жыл бұрын

Mike Maxwell over at Hubitat is working on getting the milimeter sensors that are zigbee, they have some that are like a recessed can light, so you don’t have random crap attached to the wall

@StolenJoker84 Жыл бұрын

I have one single motion sensor set up to enable a single lamp in our hallway at night. I have it set to turn on only when the light level is dark, and the light also turns on when someone comes home after sunset. It’s been nice to have the hallway light come on when it’s needed.

@andypaulusma3523 Жыл бұрын

Great points! I've got a smart light issue I'd like to solve, but haven't figured it out yet. In my living room I have 2 smart light switches (for separate bulbs) and a smart bulb - all connected to HomeAssistant. I'm looking for a way when I change the brightness on one of the physical switches for the other 2 lights to match the new brightness level (i.e. 50%). I can do this by asking Alexa to set the lights to a given level, but I've yet to figure out doing it just with a switch.

@rossjaniceourhouse8852 Жыл бұрын

Throw out the bulbs if they do grouping and do grouping with Mesh BT bulbs or group to a common WIFI brand. They share and ensure all same setting on al as groups

@stnkpalm Жыл бұрын

Question on #6 can you create these kinds of automations with Apple Home or do you have to build up something like Home Assistant in order to have this level of control?

@j.zangerle7173 3 ай бұрын

I got one quick question, and I would be happy to pay you to discuss this solution : Thank you so much for all your amazing videos ! I'm renovating my home from A to Z. I will put all wall switch concealed in the wall with philips 4 gang round switch to controle all light bulbs over home assistant. Where I do not have a solution is for the concealed stairs (in the wall every 3 steps) lights. How could I get them to be smart. Cabled switched that would work on motion sensor ? If yes, which one ? Or do you know any wall concealed light that could do ? Thank you so much !

@JerryNeutron Жыл бұрын

motion lights have been kicking my ass in the kids bedroom & garage! time to re-do my setup

@VishalMusunuri Жыл бұрын

Reed, love your videos, channel... and your t-shirts. Where do you buy them from? :)

@yabinuh Жыл бұрын

Ide bagus 👍 jadi bisa lebih nyaman dan peraktis

@102179mark Жыл бұрын

I bought the Withings bed sensors based on the recommendations from your channel, not too keen on the IFTTT integration. Any chance you have a video on integrating them with Homeassistant? I can't ever get stuff integrated when I try to figure it out based on the HA pages and forums.

@andyvr9166 Жыл бұрын

Any change you can share how to temporary disable the motion sensor(s). Thx

@jjaisudhan 11 ай бұрын

Can we use both regular manual switch for a light and also a motion sensor as well for that same light to on and off?

@TheSlimHim Жыл бұрын

You linked the HSM200, have you used it? I have two and they both make a terrible high pitch whine. The custom support says it normal. They also register the built in LED turning on/off as motion...

@xavierdaley7690 Жыл бұрын

Hey there, which application are you using to do all your automations?

@ofiros1987 Жыл бұрын

Great tips. I also did some of these mistakes. Whats bothering me is which cheap motion sensor to get. I have the one from sonoff but they are not that reliable

@SmartHomeSolver Жыл бұрын

I've been using more Aqara motion sensors lately and they work well for the price.

@rossjaniceourhouse8852 Жыл бұрын

Not my place but there Tuya sensors below $8.00 that are Zigbee and HA compatible. They work well.

@iamontech Жыл бұрын

Thanks for the video, of topic question where did you get that cool retro tech shirt?

@SmartHomeSolver Жыл бұрын

www.threadless.com/shop/@threadless/design/retro-technology-black-variant/mens/t-shirt/regular?color=light_blue#m

@25milliwatts 6 ай бұрын

thank you. How to prevent light going off by automation while light was on before motion detected? mostly the light was on with a reason.

@joz534 Жыл бұрын

So, my "dream" motion sensor set-up is somehow having a system that can detect where in a room i am (very accuratly) and do automation based on that. Rather than current tech of each sensor being simple "do i see someone or not" something like distance sensor but in 2D rather than 1D(more of a cone but you get my point) so far im unable to find such system, or anything even trying. Wiz lights "Space Sense" solution gave me some hope based on it's name but after guick googling i don't think it's that. Even if it's bad or doesn't work properly. Having a starting point of how such tech is talked about / advertised, would be huge help.

@wjlambert Жыл бұрын

One of the things that bothered me most after getting deep into Smart Home Automation is that so many of my sensors run on batteries. I swap enough batteries as it is, I really don't want to play Battery Butler forever. Fortunately some sensors come with Hard Wire connections. However, like the battery-backed emergency lights in my home, I would like it if a manufacturer would make sensors and devices that are battery AND hard-wire connected. I realize that if the power is out, what difference would it make if my sensors had batteries. But I try to be doubly prepared in all things that I do (like how you have physical switches for the sensor-controlled lights). EVERYTHING that I can have on Battery backup, is on a backup, including my house. Even though the town wherein I live, is pretty reliable on power, I still don't want to rely 100% on them. Believe it or not, I'm not a Doomsday Prepper, I just don't like to have to rely on a system that neither knows my name, nor really gives to sh!ts about me

@eberger02 Жыл бұрын

If there is a particularly strong blow of wind my basement door moves. This triggers the first ever motion detector I installed. Same applies of the front door is opened. There are ventilation bricks into the basement and essentially it sees the main air pressure. If I was doing again I’d make sure it can’t see any doors. Unfortunately it needs to turn on if the front door is open.

@StuartWoodwardJP Жыл бұрын

Here’s my disaster. I got a light bulb that detects motion using microwaves but it works through the thin walls in my house! In the end I put it in the closet but even then it was turning on the light in the closet when I turned over in bed at night. It was great for creating that haunted house vibe.

@thedarkknight1971 Жыл бұрын

AHHH YES! Some LOVE for old tech Nokia 5110 and 3210 (T-Shirt)... I remember those days! Anyway, some very useful info there, planning to help a friend with their lighting setup as their lad (a typical teen) CONNNNNNSTANTLY leaves lights on all around (and in this current financial climate (even though they are all LED bulbs, every little helps) 🤔😏 (also a subscriber to our old mate Paul Hibbert)👍 😎🇬🇧

@markkempton4579 Жыл бұрын

My problem with #4 is that Alexa does not allow for multiple conditions on a routine. I have to have four routines that will turn on my garage lights (both entrance doors, camera detects motion, the motion detector in the corner detects motion), but I cannot duplicate that with "no motion" since each routine would operate independently and could turn off the light when I'm in front of the other sensor. How do you get around this with Alexa?

@GGg-ic9ku Жыл бұрын

How do use Withings sleep pad for pressure detection in Amazon Alexa?? I saw a two second reference to it, but no detail would be interested to see how you connect to it

@sitte24 Жыл бұрын

Instead of having various conditions on when to turn lights on/off if motion is detected, I simply turn on/off the motion sensor automations. This way I feel like I am more flexible when adding new things because I don't need to edit known working automations and can track down issues easier

@brucybruce Жыл бұрын

The only “son in-law” that you know of.😮

@attilasos7508 6 ай бұрын

I use Philiphs hue motion sensor in the kitchen. This turns on the central light (innr smart colour E27 bulb ) and the work desktop lighting (2 led smart colour strip). The motion sensor has 2 rechargeable AAA batteries. I don't understand why sometimes it only turns on the light with the reduced brightness. It can be very annoying when it turns on with 10-30% brightness. What could be the reason for this? Sometimes it also happens that it turns on and then immediately reduces the brightness.🤨 in the normal case, it would turn on, reduce the brightness at a programmed half-time, and then turn off. That is how it worked before.😌😌Thanks for your advance, idea.

@neilrichetti5669 Жыл бұрын

can you tell me what motion sensors work to trigger routines on the google home app?

@marcvought 10 ай бұрын

As always, good stuff. And you married way up my friend.

@DaleThomasNYC Жыл бұрын

Hey Reed - noticed you use HA UI for your automations. I tried searching your videos to see if you talk about why. But couldn't. Do you always use the HA UI? Or use Node Red?

@SmartHomeSolver Жыл бұрын

HA UI for all my automations. The reason why is that I come from a developer background and it makes more sense that way. I know Node Red is powerful but just prefer the native automations.

@DaleThomasNYC Жыл бұрын

@@SmartHomeSolver BTW this idiot is using your profile pic. They tried to comment on my post here and I reported the profile. But it's still up. kzfaq.info/love/DYQrVhdL872J-1u6QtYO6w

@denniskluytmans Жыл бұрын

Homeassistant has grouped sensor option these days :) you can group them and don't have to use a condition

@FutureFaz Ай бұрын

What ceiling lights do you use? I switched to LED can lights and the dimming is horrible with caseta switches

@pastuh Жыл бұрын

So I just installed a Philips Hue ceiling light today. A motion detector can detect motion, but is there any way to extend the time since a person was last detected at a specific location? I mean, if I move to the table, I'm definitely going to stay there.. So the light has to be on until I change position. Is ultrasound the only solution?

@MYWORKINFO2012 Ай бұрын

Yeah currently struggling with garage light. It has motion sensor at the switch but my garage big and when I am on far side it turns off. I want to install a dual motion sensor but not sure or do go about it. Also have several series of lights. It’s pretty frustrating.

@cbcdesign001 Ай бұрын

You can group up motion sensors into a group with Hubitat or a helper group in Home Assistant, that's how I handled our landing light so its switched from upstairs or downstairs when somebody begins climbing the stairs.

@richburmond6761 Жыл бұрын

Aqara fp1, one sensor to rule them alll :D

@BudsSmartHome Жыл бұрын

Man! That is rough! The only son-in-law and no longer the best son-in-law. You made me laugh!

@MalcGG Жыл бұрын

I'm moving into an older house and am excited to smart home-ify it! I'm hesitant on the motion sensors because what if ghosts set them off 😱

@xXDeadJesterXx Жыл бұрын

Does anyone know which pressure sensor he has under his bed? I've been looking for one of these (that can detect how much weight, so it will know if its me or my wife/kids)

@SmartHomeHASHTAGS Жыл бұрын

Believe it or not I just got my first wireless motion sensor. My WeMo motion sensors work* with Google now too. I'm waiting for when my Reolink cameras will be able to turn on or off lights when the camera sees or doesn't see a human form.

@TheLukemcdaniel Жыл бұрын

With our cats, and me being on a separate sleep schedule from my wife, I'm not sure we want that except maybe in the back entrance to our house where we come and go most often.

@dspamers 6 ай бұрын

How do those mmwave sensors work with dogs in the house? I have 4 staffies, and my pet immune PIR sensors detect the dogs better than it detects people (it apparently has something to do with their body temp) so I am at a loss for what kind of motion stuff to look at.

@AlexanderEvans-jp6jh Жыл бұрын

Can you share how you created the disable motion on/off switch? I'm trying to do that exact thing right now. 6:33

@ticketwingz9970 Күн бұрын

you everr figure this out?

@junaidvayani4384 5 ай бұрын

How is it possible for me to incorporate two separate PIR sensors for lights off into an alexa routine that has a condition for no activity for both sensors for x duration until the routine is triggered?

@carlosgarcialalicata 3 ай бұрын

How do you dim the lights? Do you use smart bulbs?

@regwatson2017 7 ай бұрын

All sounds good but seems like you have a very complex setup (pressure pad under the mattress ???) that if you are away from home no-one else will know how to fix stuff if there's a power outage - when power resumes often the automation items needs to be reset.

@fredericfaure5958 Жыл бұрын

Good resumé! I wonder how you would do to avoid motion detection on cats or dogs?

@thugpug4392 Жыл бұрын

You don't, this empowers your pets to control the lights. I suppose the wifi detection would work for non-birds.

@SmartHomeHASHTAGS Жыл бұрын

Putting the sensor further back on the shelf to reduce downward sensing?

@fredericfaure5958 Жыл бұрын

But my alarm system has special motion detectors that do not detect my cat. I presume these sensors must exist for smarthome systems ?

@thugpug4392 Жыл бұрын

@@fredericfaure5958 idk how they do it but there has to be some intentional computing going on. Probably your alarm system is designed to detect people, not motion. Your cat might want light especially if they're trying to find toys they've hidden.

@chrisalbertson5838 Жыл бұрын

A "person dector" ues a camera and a bit of "AI-like" processing

@darknessblades 9 ай бұрын

Mistake 2 isn't a mistake in my case. since I use it to turn of selective lights. [yes for 1 sensor I need to 3D print a barrier, so its range is more limited. but overall having it automatically turn off lights in rooms I am not is great] [I only have 4 rooms with smart sensors], and all other are either manual, or motion [hallway/toilet/bathroom]. Which is especially useful because my house isn't that big. and having rooms where I am not, turn off automatically, is quite nice. [I just have those tradfri on/off buttons, in a lot of places to turn on lights for rooms I am gonna go to/connecting rooms]

@slip0n0fall Жыл бұрын

One caveat I've found with some motions (looking at your Hue) is they only report updated Lux levels on motion. So your logic can be using outdated lux levels.

@Alphasig336 Жыл бұрын

Yeap, I agree dumb motion sensor are more reliable and cheaper for things like Pantry, mud rooms, or closets. Little concerned about sitting under ultrasound 24/7/365 affects on the body.

@cbcdesign001 Ай бұрын

What I find is that the women in my Family like automated lighting when it works but have a very very low tolerance for it when its not perfect. This has made automated lighting in some rooms like the Kitchen, Hall and Landing, easy and 100% successful. The Living Room, well lets just say that is still a work in progress.

@Ultimaus Жыл бұрын

Reed as the authority on diy smart home your persistence in integrating it with your family is what I really enjoy about your content. I think I've posted about how I think smart home is isnt selling as well as it could because it's not marketed as the saviour of marriage. Lots of my friends think smart home is just talking to a smart speaker to turn on and off hue lights. And that's what they have. However the power of automation applied correctly is infinitely more useful. Vibration pressure and contact sensors are some of the knick knacks that are a real game changer. Specifically if you live with a spouse and family and like me you live in a 3 story where one floor is seldomly used but is necessary to access to enter/leave. But your bedrooms are on the top floor. And in the middle of the night your spouse asks oh... Can you check if we turned off the lights downstairs? Or is the garage door open? (This interaction alone is the sole destroyer of marriages I garauntee it) Smart home automation is actually a solution you can buy to fix an otherwise uninhabitable state of mind. I'm talking about the same effects as curing clinical depression.

@MrTopVideo Жыл бұрын

what app are you using to program all this stuff ? Philipps hue's app is soooo old

@bugjuicer Жыл бұрын

In Homekit, how can you set a sensor to turn lights on, when there's motion AND when it's dark? Like lights in the hall - during the day, they're not needed. I've been playing around, but it'll only do LUX or motion (or temp), which is useless. Anyone know how to combine LUX AND movement? Been just using the Hue app, but want the flexibility of HK

@LeoBaliano Жыл бұрын

I want to do the opposite: I have a mopping robot that doesn't tell me when it stops cleaning. Can I use a motion or vibration sensor on it, and let me know when it stops? What do you guys suggest? Tyvm :)