I'm a big fan of the T-maxx I have two myself I have one I like to call my show truck and the other is my beater and your T-Maxx is the best cooling looking t-mass I've ever seen in my life awesome job
@BOTAJELL8 жыл бұрын
Very Nice Job Nitro Brother👍🏼 It's a work of art! I used to have a pipe like that and it was from BUKU . You should really get a Polished ERCM End Bleed PIpe . It would look and sound and run sick on that thing!!!!
@johnbarr25122 ай бұрын
That looks really good. Did a good job. I’m working on a Traxxas Tmax wheel drive at a 3.3. I suck two point threes on it with two superchargers and with nighters oxide kit and I’m upgrading everything else right now.
@garypierson645510 жыл бұрын
awsome truck...like the k&n filter
@PhatTimmy31410 жыл бұрын
Thanks :)
@DMCard-ts4rg9 жыл бұрын
Awsome job, attention to detail is out of this world. I would have to agree with other comments and say it is a very rare CVEC pipe best RC pipe ever made, if anything hold on to that pipe you won't find another very easily. Congrats on a job well done hope to see more.
@Brennen_Nisporic5 жыл бұрын
Your truck is nuts. It looks amazing.
@Tango_Mango_RT_34510 жыл бұрын
that is a bad ass tmaxx , gezz , best I have seen by far !
@PhatTimmy31410 жыл бұрын
Thanks a lot! I really appreciate that :)
@angelperezjr30466 жыл бұрын
This is the "Best" RC Car I've ever seen, crazy!!!
@iamjuice74794 жыл бұрын
The frame is just incredible!!!
@dredog6664154 жыл бұрын
very nice build!
@mickeybeahl57197 жыл бұрын
I have always loved the look of a aluminum built t-Maxx. I agree it's not a rig to bash but it's beautiful and nice to show.
@Randy_Cox3 жыл бұрын
Baddest shelf queen maybe. That thing is just waiting to bend into a pretzel if it ever sees dirt, and flat explode if it ever sees dirt jumps.
@trillwill85wc10 жыл бұрын
That's a cvec pipe! Very hard to find and one of the best money can buy! Very nice truck!
@PhatTimmy31410 жыл бұрын
Thanks Will :)
@bradleyanderson36244 жыл бұрын
That’s the cvec he’s right
@superaidenproductions18704 жыл бұрын
I thinks it’s a cvec style pipe, it would say c vec if it was real, but I could be wrong, I have a longer pipe that loooks like the one in the vid but it’s not a real c vec, I also have a purple c vec
@jkrzton893 жыл бұрын
That thing is sick
@ntroxell838 жыл бұрын
that truck looks badass
@phillys9767 жыл бұрын
Absolutely awesome build man! it is beautiful....
@jamesnicholson57346 жыл бұрын
Brother job well done that is the best Tmax I’ve ever seen I think I’ve seen maybe one more that was pretty close to yours and it was red but I think this one that you did looks a lot better I think the blue and the crime everything just sets off and I think the air filter is probably one of the most beautiful pieces on the vehicle as well
@shakeyshine7 жыл бұрын
Very nice build.
@edwardchambers82518 жыл бұрын
Very nice work the detail is exceptional You should hold onto it if it was me I would not sell it.
@nickmartin44458 жыл бұрын
bad ass piece right there
@kencassy5 жыл бұрын
Very nice.
@bigmankeys8 жыл бұрын
very very cool Bro
@gregorybuchanan98049 жыл бұрын
Awesome build man!
@3rdaxis6499 жыл бұрын
Aluminium body posts and a-arms...bad idea. You will be replacing these and possible the bulk heads because of them with the origianal plastic ones first roll over. Something's got to give:) Love that motor though.
@Richie_RHD8 жыл бұрын
I really doubt this truck will ever see more then 10 mph. It's a show truck. Or shelf queen. It won't get much bashing. If it does. I would be very surprised. And if it does. You are 100%right
@zachpendleton88108 жыл бұрын
it would have to be a really hard crash for that to bend I had a all alluminum tmaxx once and I ran it into a brick wall to test the durability and I only broke a a arm
@3rdaxis6498 жыл бұрын
I used to race and none of the top guys used alluminium a-arms, always stock or Pro-line. But thats if your racing if your just putting around the backyard its totally fine.
@kencassy5 жыл бұрын
Love the shocks
@mtctookie2510 жыл бұрын
Very nice bro, finally got it finished, lets see it running. One Luv!
@PhatTimmy31410 жыл бұрын
Thanks tookie! Ill get tis baby going as soon as the weather gets better :)
@mtctookie2510 жыл бұрын
PhatTimmy314 Good deal
@jlthibodeaux397 жыл бұрын
nice truck I'm about to buy one I have a funny car it's so fast and really fun to drive I'm hoping the truck is just as fun to drive pls like to see it run
@morrismercier98497 жыл бұрын
It is real nice. It is missing one thing. Especially with the way you ran fuel lines. A good skid plate.
@thedknuckles10 жыл бұрын
Love the bling!!!
@PhatTimmy31410 жыл бұрын
Thanks I appreciate that :)
@zachattack20169 жыл бұрын
Cool TMAXX bro. I have one. The bad thing about having all metal parts is, if you crash it at top speed, it will all bend.
@ugna27736 жыл бұрын
Cvec pipe. I got 2 of them. Awsome pipe
@terrencefrye992810 жыл бұрын
Nice man that pipe looks like a buku pipe
@PhatTimmy31410 жыл бұрын
Thanks Terrance :)
@djz74008 жыл бұрын
Nice, Sound's F'in great
@edwardmacias43149 жыл бұрын
I just bought a pipe like yours it's a gpm racing tp30007 purple Tmaxx costom tuned pipe all set thanks and cool truck
@PhatTimmy3149 жыл бұрын
Edward Macias Thanks a lot!! :)
@reubenrobinson34448 жыл бұрын
sweet project
@ronniegregorczyk4097 жыл бұрын
Beautiful!!!
@ljaysperspective17755 жыл бұрын
So my comment is a little late...lol great job! Looks awesome this is definitely not for bashing...im not certain i would sell it, u usually never get ur money back. I upgraded my t maxx but i did do all CNC because i still want to do some bashing with it. It does have some cnc parts but also RPM parts. Good vid thx for sharing
@grimthenoble6 жыл бұрын
That is a Cvec pipe and is designed for an RC10GT platform, I would recommend getting a larger pipe for that big block.
@100drewgo7 жыл бұрын
nice truck I just bought a T Maxx 2.5 today off ebay for 160$ comes with extra
@edwardmacias43149 жыл бұрын
Hay nice polishted truck I saw your video and I also saw your pipe on eBay it's I think like a second hand stock traxxas pipe it runs for $49.00 bucks it's nice I'm trying to remember where I saw it but again nice truck
@michaelmitchell59097 ай бұрын
Thats fucking awesome
@toolton20033 жыл бұрын
i love it thnx
@TheDrastic53710 жыл бұрын
That truck is gonna bend if you bash!!!! You better drive that in parking lots!!! The pipe could be GPM or Buku!!!! Savage XL is KING!!!!!! LRP .32 is the BIG BLOCK YOU WANT!!!!! Nice build for a SHELF though!!!
@PhatTimmy31410 жыл бұрын
The aluminum arms is the only thing that would want to bend if I were to bash it! I totally agree the LRP .32 is definitely a bad ass engine!! The Savage XL is a good basher .. but ugly!! lol and I built it for shelf .. not to bash :) Thanks for checking out my vids :)
@TheDrastic53710 жыл бұрын
I will keep checking for more!!! Check out my Savvy XL!!! Still making changes fine tuning.
@christianmontano23617 жыл бұрын
K&N Filter wooooooooh!
@GODLIKEZ4908 жыл бұрын
nice job
@karriebhurgari39336 жыл бұрын
I remember this video when you released it! Ahh the throwback! Also why does every fucking t maxx owner put that crappy k&n filter on it?? It's only gunna destroy the engine.
@tyloradams99898 жыл бұрын
Dude I would cry if I destroyed the truck but nice work
@scottpalmer38759 жыл бұрын
you should put a superchsger on it with a back doule exhaust for the back end
@tristenbrady60187 жыл бұрын
Scott Palmer a supercharger does nothing for a nitro engine except for make it run like shit
@Joes66gto7 жыл бұрын
there's a piston inside when you open it up to adjust the back pressure
@Joes66gto7 жыл бұрын
www.fuyuanrc.com/dept.asp?id=234&mfr=101
@jspeedrc2 жыл бұрын
👍🏽 👍🏽 Cool
@enricodedios37023 жыл бұрын
beautiful! Where did you get the air filter?
@pioneer1399 жыл бұрын
That's a bad ass truck man nice job! But could you tell Me have you had a problem changing the transmission gears to metal from plastic? I have a tmaxx upgraded to a 3.3 with tmaxx exhaust everything els is stock. But the pin that go's in the primary gear will break off if you run into something. Doesnt have to be hard or extreme to do it either. Was wondering if going to the metal gears would help or wouldd it be bad idea because I do wreck some times but it doesn't take much to brake that pin. I was worried if I changed them to metal that since its stronger metal that it won't give and may tear up something worse.
@PhatTimmy3149 жыл бұрын
Thanks man :) I haven't ran into any problems but I haven't really ran it to hard either. It definitely shifts smoother with the steel gears. I would say its worth doing.
@shaneglover99 Жыл бұрын
Any tips for putting a JPX Jammin .21 on a 3.3 tmaxx
@06madmartin3 жыл бұрын
Know it's old video but is there any original car left pretty much a scratch build bloddy nice tho sick congrats
@ntroxell838 жыл бұрын
but doing a great job
@lemkelegion8 жыл бұрын
Just bought the Traxxas Nitro RTR Stampede, would it be possible to build it just like this
@mandyice87436 жыл бұрын
that fucker is nice as shit!! I have a t maxx and I have a lot of mods on it too but damm
@ThatsToughTV7 жыл бұрын
I put big joe 40 tires on there.!
@Bman012347 жыл бұрын
Unbelievable looks like a lot of $$
@castoreviewscasto85288 жыл бұрын
where did you get the k and n air filter and what is the filter called
@Rebecca_The_Dragon9 жыл бұрын
who makes the tank? I want one for my maxx
@anthonydutcher21156 жыл бұрын
Where did you buy that air filter in does it work good
@LocoKilaProductions8 жыл бұрын
+PhatTimmy314 where did u get the center metal drive shafts and cvds to the wheels
@PhatTimmy3148 жыл бұрын
I got them from a guy on ebay that sells a lot of custom RC parts.
@RCflipz3608 жыл бұрын
Your exhaust is made by Buku Performance Pipes
@AGUIARMARIO8 жыл бұрын
+RCflipz360 i believe it's a CVC pipe. I may be mistaken tho.
@RCflipz3608 жыл бұрын
+MARIO AGUIAR I think you're right, but it's kinda hard to tell by just watching it...
@Texas12valve10 жыл бұрын
jezz man amazing t maxx i hove an smaxx that im building i will put a vid up of it. but mine will be a basher
@missouriairgunner2814 жыл бұрын
Complete parts list??
@greggorga41715 жыл бұрын
How much was it to build grand total
@xxjacobi5 жыл бұрын
multi point shock towers!!!!!
@eliflower62338 жыл бұрын
Do you not have to cut out a place for the motor in the body?
@michaelmitchell59097 ай бұрын
Looks like a cvec pipe
@MrHumza121110 жыл бұрын
Looks great, i have a question about the body what body can you fit on that chassis, i just made one for my self with same chassis with twin 5.9 hpi engine and integy aluminum ez start with rdlogics exahst and metal gears gearbox.
@PhatTimmy31410 жыл бұрын
Thanks :) I know the Proline Top Kick body and the Proline F650 body fit this chassis very well
@taylordrogosch967710 жыл бұрын
Just got my first t-maxx and I ended up actually getting two! But I got a question on a good steering servo. You have any recommendation?
@PhatTimmy31410 жыл бұрын
II think a real good and strong servo for a good price would be a HiTec 645mg .. you can get them for around $30.00 new on eBay
@DMCard-ts4rg9 жыл бұрын
Awsome job. Fantastic detail. I would have to agree with the other comments that it is a rare CVEC pipe, best RC pipe ever produced. If anything hold on to that pipe.
@kaycee9337 Жыл бұрын
What header you used
@YamaBoyFZ098 жыл бұрын
what type of center driveshafts do you have on the truck I have the same set up but I'm running brushless
@petertsevis22244 жыл бұрын
What did u search up on eBay for the parts
@theofficialjohnmendez23387 жыл бұрын
It is a cvds pipe
@RichieRich-qd3um10 жыл бұрын
thats nice . how much money did you spend on building it? i wanna start my own build.
@PhatTimmy31410 жыл бұрын
Thanks :) I got about $1200 into this one
@A_Man_In_His_Van6 жыл бұрын
About tree fiddy.
@jaketherattlesnake1358 жыл бұрын
I built my whole tmaxx in one day because we found it in the garbage with everything but engine good deal right lol
@ntroxell838 жыл бұрын
I just don't have the extra money to put into um I have 2 n my son's have one each but they are stock but If I had extra cash to spend I'd like to build one.
@Alforlife7 жыл бұрын
Dude super nice truck, I have a big block t maxx truck. Can you help me !!!
@blackdre3610 жыл бұрын
how much you want for it i need this one in my colletion this one would be my shelf queen
@PhatTimmy31410 жыл бұрын
If you are serious send me a pm and make me an offer. Im getting ready to put it up on eBay anyway.
@3rdaxis6494 жыл бұрын
lol, it's the Mr. T Maxx.
@jeffklimek33883 жыл бұрын
Looks like a buku clutch
@zachpendleton88108 жыл бұрын
i have the same pipe but mine is gold color
@arturos.l.2248 Жыл бұрын
Why the metal gas tank how do you see the nitro 🥸
@angelperezjr30466 жыл бұрын
What woild you sell her for???
@johnfrancis42908 жыл бұрын
do you have any more t maxxs?
@russellcupples21707 жыл бұрын
Where did you get the trans case ?? I found the diffs housings but can't find the trans case.
@PhatTimmy3147 жыл бұрын
I got that transmission case with the chassis from a guy on ebay. It was the hardest part on the truck to work on. Once the gears were switched out it was well worth it though :)
@russellcupples21707 жыл бұрын
Thank you ,Does it have a name on it??
@PhatTimmy3147 жыл бұрын
It was RDLogics .. the steel gears were Robinson Racing
@russellcupples21707 жыл бұрын
Thank you again sincerely
@ick187697 жыл бұрын
Where did you get the k&n air filter at?
@PhatTimmy3147 жыл бұрын
I got it off of eBay.
@slipknotkillerr10 жыл бұрын
hey man, im thinking bout making my tmaxx a big block with the ext chassi and ext a-arms. is their anything really used from a stock tmaxx? or am i better off just basically building a completley custom tmaxx and leaving the stock one alone
@PhatTimmy31410 жыл бұрын
Do you have a 3.3 or 2.5?
@slipknotkillerr10 жыл бұрын
3.3 frame but 2.5 trans
@PhatTimmy31410 жыл бұрын
Benjamin Camacho you will need to get an extended rear drive shaft and use a 2.5 or aftermarket steering bell crank. everything else should work if needed. Depending on the chassis you get, you might need to relocate the throttle servo. it gets pricey and frustrating building a custom rc piece by oiece.
@JulianJohanson9 жыл бұрын
Maybe drive shafts and receivers
@JulianJohanson9 жыл бұрын
Nope he said steel cvs
@fccmbc878 жыл бұрын
the pipe looks like it's made by GPM Racing .
@alberteyde80246 жыл бұрын
What kind of engine mount did you use
@ianvaldivia19938 жыл бұрын
What did you use for the air filter
@Joes66gto7 жыл бұрын
cpv exhaust pipe
@jkrzton893 жыл бұрын
The pipe is a cvec
@2manyhobbies746 жыл бұрын
Wow ow wow
@carlitos96818 жыл бұрын
hi where did you find the gas tank?
@PhatTimmy3148 жыл бұрын
+Carlos Vicharra I found it on eBay ... best place to find aluminum parts at a good price.