Seiko 6309A Assembly Part 2 -Calendar Works

Рет қаралды 17,765

Күн бұрын

In this video I show you how I assemble a Seiko 6309A movement after cleaning and inspecting the components for damage. This is the second part of the assembly where I show you how I fit the calendar works, minute and hour hands.
The video is targeted at complete novices to watch movements but for those who want to try their hand at some basic servicing and repairs.
I am in no way a professional. I am completely self taught and I have only had guidance from the internet.
Download link for the Service sheet can be found on my website here. myretrowatches.co.uk/seiko-da...
If my videos have helped or inspired you into this hobby then I would be grateful if you could support the channel. A little goes a long way.
Make a one-off/ monthly donation to the channel here: www.buymeacoffee.com/MyRetroW...
My tool affiliate links page. Items do not cost you any more and I earn a small commission. All tools are hand picked by myself. myretrowatches.com/tool-sale-l...
like to buy a T-Shirt? then please look here: teespring.com/stores/my-retro...
Thank you for your support.
My website: myretrowatches.com/
My Facebook Group - Retro & Vintage Watches & Restorations
/ retro.vintage.watches....
My Instagram: / myretrowatches
Email. michael@myretrowatches.com

Пікірлер: 36

@MyRetroWatches 5 жыл бұрын

Have my videos have helped you? why not support the channel in some way You can make a one off/ monthy donation here in only one click: www.buymeacoffee.com/MyRetroWatches If you would like to purchase any tools & equipment then please see my Amazon affiliate & eBay (I do earn a small commission from any sales.) Thank you. Link: Link: myretrowatches.co.uk/tool-sale-links/ If you would like to buy any of my T-Shirts then please look here: teespring.com/stores/my-retro-watches

@alokm1233318 9 ай бұрын

I needed to assemble my 6319. it was very helpful.

@adrianbirkett594 5 жыл бұрын

Best instructional video I ve seen in years!. Very very good. 👍. Adrian.

@MyRetroWatches 5 жыл бұрын

Wow thanks Adrian !

@johnno_oz5587 10 ай бұрын

This was very helpful. I was reassembling a 7546 which is the same on the front side. The tip engaging the day spring and recess side down for the c clip were appreciated.

@MyRetroWatches 10 ай бұрын

Glad it helped!

@philiporrow7906 6 жыл бұрын

Thanks for another quality video Michael which I shall use in conjunction with the service sheet

@fuzailaglodiya8885 5 жыл бұрын

Thank you so much for this video i just service my Seiko watch first time, and thanks for the detail video.

@MyRetroWatches 5 жыл бұрын

Live Virus really pleased I could be of help. It’s a great feeling when you take a non running watch and get it to be fully operational again !

@rodd555 Жыл бұрын

good videos, thanks. I got my first 6309 on its way .

@vwkoolaid 3 жыл бұрын

Thanks so much for this! I feel proud to have been able to disassemble and re-assemble this movement. Now to learn oiling.

@nguyendinhsy1601 5 жыл бұрын

Thank you

@xipishi 2 жыл бұрын

thanks, master.

@MetalxInquisition 6 ай бұрын

Thanks!

@MyRetroWatches 6 ай бұрын

Thank you so much, very kind of you.

@xuancao7642 5 жыл бұрын

Hay thank you

@MyRetroWatches 5 жыл бұрын

Your welcome!

@goosh31 8 ай бұрын

Hey Michael, awesome series! I've made it to the final test and sure enough the date isn't rolling over with the time. I've tried rotating the keyless in both directions for some time, and I've double checked the steps that should impact this. I'll keep diagnosing this, but if you or anyone else have any ideas of what it could be in the meantime I'd appreciate the insight 😁 Thanks again for this series! My first movement spun up on the first try!

@goosh31 8 ай бұрын

Interesting. So I found the two screws holding the pallet fork were wrong. Too long and sticking out the back preventing the date function. Now after swapping them out with the proper screws, I managed to get the week day to change but not the day itself. Will hang it up for today but more investigating to be done

@goosh31 8 ай бұрын

I have no clue how, but the issue was resolved be me back stepping, remiving the week day dial, spinning through the time and sure enough it somehow started swapping the days as expected. Everything is working flawlessly now! Thanks again for the indepth videos! Excited to wear something that I've worked on.

@Murthyy24 2 жыл бұрын

Thanks so much for the very detailed video, I was able to disassemble and assemble 6309 movement exactly the way you did in these 4 videos But I have a problem in winding the watch, I have so far followed your videos 3 times and disassembled and assembled it, but the winding stem doesn't seem to engage with anything in the first position and unable to wind the watch. Date and day setting is working in the second position, time setting is working in the third position. Couldn't seem to find the problem. I have bought a new winding stem but no luck. Appreciate any suggestions

@MyRetroWatches 2 жыл бұрын

Seiko do not hand wind. They are automatics only. To wind you need to either wind the mainspring manually by using a screwdriver in the screw on the ratchet wheel on top of the barrel. Or to fit the rotor and spin that to wind. Other than this well done for getting this far.

@Murthyy24 2 жыл бұрын

@@MyRetroWatches thanks for the quick reply. Looking forward to learn more from your channel. Amazing videos.

@onlineidentity6826 4 жыл бұрын

Great video ! I’m using it as we speak. You mentioned in Part 1 you would I include a step about how to disassemble the automatic works and rebuild. I have to do so as the pawl lever is broken on the movement I am working on and I am waiting on a replacement arriving. Is this an easy process ? Thanks again 🙏

@MyRetroWatches 4 жыл бұрын

Hello, removing the pawl setup is easy and will be in one of my videos some where. there are 3 screws to remove the plate from the top of the watch. The pawl is held in by a plastic shroud which you just use a thin screwdriver blade to lever up. If you see the end of this video (click link) it will show you the assembly . kzfaq.info/get/bejne/pZuqndCGrqingJ8.html

@onlineidentity6826 4 жыл бұрын

My Retro Watches Thank you for your reply. I successfully disassembled the Automatic works, correctly oiled, installed the new pawl lever and in stalled the the assembly during the movement side rebuild. All works perfectly 🙏 Now to calendar side this week. Brilliant videos.

@arpag 6 жыл бұрын

Is the facebook group over? I've done this hole process but the balance only works when i stop the barrel.

@MyRetroWatches 6 жыл бұрын

Gaspar lobo Facebook live and has 2000+ members. Sorry I don’t understand your question “balance only works when I stop the barrel” Without the balance fitted does the pallet fork move from one side to the other wth the minimum touch of tweezers / oiler?

@arpag 6 жыл бұрын

Thank you for the reply! Yes, i done that and the pallet fork works like you say in the video. When i took the barrel out it had way to much oil and it was very dark, i dont know if it helps... I'll try to upload a video to show you.

@arpag 6 жыл бұрын

kzfaq.info/get/bejne/d6iFYK9hvuCvpKc.html

@MyRetroWatches 6 жыл бұрын

So there looks to be something wrong with the power. if you have to apply pressure on the barrel then its either not seated right / flat, the hole in the mainplate is dirty or the barrel arbour is sticking. without the pallet and balance attached does it spin freely when you wind the spring? its always a sure way to tell. attach the ratchet wheel on the barrel and when you tighten the screw this winds the spring. The wheels in the movement should then spin rapidly. I would assure what happens is this either does not happen or happens for a bit and stops. You can often hear it also. wheels make a whistling sound, if the sound is going higher and lower it means the power is fluctuating, it should be consistent. |If you have joined the FB group post in there also as I or other members can come to your aid.

@elliottharwood6555 5 жыл бұрын

I really want to watch this video as I'm having difficulty with a keyless works on this movement but I can only get about 30 seconds in and it freezes

@elliottharwood6555 5 жыл бұрын

1.51

@MyRetroWatches 5 жыл бұрын

Elliott Harwood not sure why must be your connection somehow . I don’t control KZfaq stream for the video

@nguyendinhsy1601 5 жыл бұрын

What your country

@nguyendinhsy1601 5 жыл бұрын

Im from Việt Nam