Replacing And Resealing RV Roof Vents

Рет қаралды 120,429

4 жыл бұрын

Become a Patron: / myrvworks
Parts and Tools Affiliate Links: myrvworks.com/resources/darre...
myrvworks.com
Certified Mobile RV Technician, Darren Koepp, shows you how to remove and replace RV roof vents and sealant.
If you are in need of RV Repairs in the Olympic Peninsula area of Washington state, submit a service request on our website at myrvworks.com today!
__________________________________________________________________________________________
Topic: Replacing And Resealing RV Roof Vents
Parts:
Fan-Tastic Vent 2250 - amzn.to/31wjQr4
Plastic Plumbing Vent - amzn.to/2O1TCZQ
Shop Supplies:
Moving & Packing Blanket - amzn.to/2O619GZ
Self-Adhesive Surface Protective Film - amzn.to/34O7PiU
Rapid Remover Adhesive Remover - amzn.to/2Oa7O2T
Butyl Seal Tape - amzn.to/302Uwwh
Geocel GC57101 Advanced SL EPDM - amzn.to/303Cmum
Tools:
Dremel MM40-05 Multi-Max - amzn.to/34KMp6p
Dremel MM600 Multi-Max Rigid Scraper - amzn.to/30rgmF7
DEWALT 12-Volt 1/4-Inch Impact Driver - amzn.to/2U89FGm
6'' Phil #2 Impact Bit - amzn.to/30ok3LP
DEWALT 12V MAX Pivot Reciprocating Saw Kit - amzn.to/2AppWOb
Spyder Nylon Brush Attachment - amzn.to/2O5UpsE
Plastic Chisel Scraper Set - amzn.to/2Zu6hXq
CLC Open Top, Soft Sided Tool Bag - amzn.to/3061Mrs
Knipex Lineman's Pliers - amzn.to/31wPdBU
PPE:
Gelfit Thigh Support Stabilization Knee Pads - amzn.to/2SrQIhc
Maxiflex 34-874 Ultimate Nitrile Grip Work Gloves - amzn.to/2O7KKBQ
Haylard Health Purple Nitrile Exam Gloves - amzn.to/2XWwEcH
Folding Track/Work Mat - amzn.to/2O3wqud
Happy Camper Embroidered Cap - amzn.to/2Yg5RYm
Propper Men's Short Sleeve Tactical Shirt - amzn.to/2XXF1Vu
Propper Men's Tactical Pant Poly/Cotton Ripstop - amzn.to/2Yh4BUC
Related Video's:
Achieving Proper Air Flow Behind Your RV Refrigerator For Better Performance - Achieving Proper Air Flow Behind Your RV Refrigerator For Better Performance
Film Date: 8/22/2019
Location: Port Angeles , WA
Camera:
Samsung Galaxy Note8
Native Camera
16:9 FHD 1920x1080
Version 9.0.01.38
Music:
"My RV Works-Jam"
Composed by Steve Patry - Four Faces Band

Пікірлер: 161

@neill.m.herbert 2 жыл бұрын

That tip with the aluminum strips on the rotten roof deserves its own video. Good stuff.

@TheBandit7613 3 жыл бұрын

Getting ready to do this. Very helpful. Your camera person does a great job.

@ruthgumataotao1792 3 жыл бұрын

Thank you. The seals on our vents are worn and last month we had a leak around the AC unit during a downpour up there on Whidbey. After watching the video, we first timers feel confident on tackling the repair.

@arthurmarion3513 Жыл бұрын

I also told my wife that your the best . I have learned so much from you . I thank you 🙏

@wk7060 4 жыл бұрын

Darren, your videos are awesome. Trying to watch all of them. Keep up the great videos.

@Tipperary757 4 жыл бұрын

Really appreciate you mentioning hair dryer to heat putty. And plastic stuff to catch falling debris.

@laudadrive 2 жыл бұрын

This dude is the man !! All of his videos are great !!

@vestup100 2 жыл бұрын

I hope this gets to you, THANK YOU x100, the oscillating tool literally made the dicor and butyl tape a breeze to remove saving me hours.

@imspandex 10 ай бұрын

Great tip with the aluminum backing! I need to replace vent and skylight ASAP and my RV has a questionable roof too. Thanks for posting the tips and video.

@edgarchennault6816 4 жыл бұрын

I really appreciate your videos. I have a travel trailer and I am learning a lot about troubleshooting problems myself.

@MyRVWorks 4 жыл бұрын

Well thank you. It's folks like you that I'm putting these videos out for. I enjoy walking through a repair and Discovery process and helping other folks do the same on their own coaches. Help save some money on the repairs by doing the work yourself. Happy camping!

@petermiller7155 10 ай бұрын

Great video! I wouldn't have thought about using that oscillating tool to remove the old stuff. That thing does wonders. Thank you for posting this video. It was super helpful!

@goalie2998 3 жыл бұрын

Excellent video. This isn't what I need right now. But feel comfortable when. I do need to make these repairs. Thanks

@krisg3984 Жыл бұрын

I used an oscillating tool also but this was very trying due to the goo factor, which is why I looked at this video ( looking for the answer). Don’t know why yours was so easy , not always the case. But hey, the aluminum was gold 👍 are you still in business? 2023 ? Hope so, would like to get an inspection done

@tracyvetter7468 4 жыл бұрын

Nice tip for a semi rotted roof! Thanks Darin.

@susans3411 4 жыл бұрын

I really appreciate your vids! Please add in sections of you cleaning with the Spyder brush, inserting aluminum, and putting tape on. Also would like to have seen what you were looking for from inside. From my experience, the devil is in the details.

@campinwill9977 Ай бұрын

Your videos are great. You saved me when one of my slide motor broke. I just replaced a vent on my Class A. A couple of points: First I wish I would have removed the inside trim, that exposed wires to upgrade to a powered vent. Next is that my 10 year old sealant was not just rolling off. As you pointed out, the Multi tool turned a 5 hour job into 30 minutes.

@mtxchip 4 жыл бұрын

Great tips and time saving tools Thanks

@jerryharter8698 Жыл бұрын

I want to thank you for all your work making my life easier. Your videos are great, informative, and help me save $$$.

@charlesrose7212 2 жыл бұрын

Another excellent instruction. Thank you, brother! 😀

@sgdluu 4 жыл бұрын

I would watch all your videos but I'll need to watch it again when doing the work. Great info!

@MyRVWorks 4 жыл бұрын

Thanks for watching. I've got many already uploaded and we're doing more and more each month.

@pilotnelson4507 2 жыл бұрын

Thank you Darren!

@daviscrt 4 жыл бұрын

awesome, can never stop learning

@gypsydavefreeman 2 жыл бұрын

Thanks again Darren!

@RoadVentureRV 4 жыл бұрын

Thanks for great video 🎖 Going to be full timing soon wanting to replace mine in 5th wheel very helpful ❤😎❤😎

@kevinbrown3017 Жыл бұрын

Great video Darren

@harryballsnack7297 3 жыл бұрын

I love how you separated the roof layer from the underlying plywood buy just yanking on the roof vent.

@jimfischer3602 3 жыл бұрын

Thanks so much. Excellent video!

@RogerSayers 11 ай бұрын

Howdy! Thanks for sharing this with us, great video... thumbs up, I've subscribed to your channel. I'm in the process of replacing the entire roof vent on my enclosed car transport trailer. The manufacturer used the same type of butyl tape that's used on rv's, on the slide outs roofs. It's hell to remove. And man is it sticky! I've got a lot to clean off. Wish my job was as easy as yours..... happy camping, and safe travels always.

@patheticprepper4496 2 жыл бұрын

Thank you, sooo useful.. I have more confidence now.

@rafaelgdelavega7095 2 ай бұрын

awesome clean work. 👍

@Racerp51 4 жыл бұрын

Very helpful and well done.

@chrismcdonald6481 2 жыл бұрын

Well I bought what I thought was the proper hinged vent for my rv. Taking everything apart, realized hinge was different. Trying to bend it to work failed miserably. Couldn't return it with damage I did. So got a drill and drilled out rivets an put old hinge on new vent with new pop rivets. Had to drill couple of extra holes in vent. Works great. Wish I took old vent with me. Lol.

@2texandreamchasers287 4 жыл бұрын

Thanks for taking the time to share the jobs you do and the tricks you use.

@manandatractor Жыл бұрын

That multi-tool looks to be a life saver. I'm faced with replacing my vents and was scratching my head on how I was going to get after the old sealant. I'm ordering a multi-tool (cordless) as we speak.

@dporrasxtremeLS3 8 ай бұрын

Outstanding Video! Thank you So Much! 5 Stars!!!!!

@stevesandoval3920 Жыл бұрын

Thank you! Nice work!

@ArcticEngineerNP 3 жыл бұрын

Wow, great informative videos.

@covetthecamper2289 4 жыл бұрын

Thanks Darren. Good idea using the aluminum bonded to the rotting substrate using a good adhesive. Can’t wait for the next one. Cheers, Jeff

@MyRVWorks 4 жыл бұрын

Yes, this was a tough one. Before I came up with the aluminum solution I wasn't exactly sure how I was going to get those screws to screw into that foam LOL. In the end it turned out really really well.

@qrevere5546 4 жыл бұрын

@@MyRVWorks Is that aluminum flat bar? 1/8" or 1/16"?

@randyandann218 4 жыл бұрын

Thanks Darren. Excellent video. I’d never believe a Dremel tool! Really seems to make it much easier.

@MyRVWorks 4 жыл бұрын

That tool sees a lot of action.

@richard1835 4 жыл бұрын

I am a Mobile Auto Mechanic and I just started working on the mechanical engine and transmission troubleshooting of RV's. I use a Professional Level Scan Tool. I found that there is so much to learn. I am going to adopt Darren's teaching and try to do my best. I am going tomorrow to investigate a possible Inverter problem. I have a PDF file with some decent information but not really what I need. The closest Parts House is 50 miles north. I am working on getting some wiring schematics now. It is a 2004 Itasca Sunova I have been trying to keep the RV running for my neighbor Caroline. She has a trip coming up and really wants to go. I am obviously going to check the wiring,harnesses,connectors. Fuses and Breakers.I see that you are well educated and learned. You have had to study to get where you are now. I am one that really pays attention to what you are showing us. You definitely have an audience. I am honored to be on your channel. Thank You

@triciamyrvworks8263 3 жыл бұрын

Thanks, Richard!

@starhopper457 10 ай бұрын

I am in absolute awe of your skills with that vibrating blade. I'd of likely butchered that guys roof! ( I know... practice and skill!) You're like a skilled barber with that thing Darren!!!

@sarahhewlett2366 3 жыл бұрын

Thank you!

@stevepemberton1273 3 жыл бұрын

Self leveling. I've worked with alot of caulking never heard of that. I need to try that. Thanx for info.

@barnettbilly85 4 жыл бұрын

Neat job .

@2-old-Forthischet 4 жыл бұрын

I'm about to redo the sealant on the top of my trailer. I see a new tool in my near future. I'm getting too old to use manual tools anymore. Thanks!

@MyRVWorks 4 жыл бұрын

Yes, I discovered that multi-max several years ago and roof work has never been the same LOL! I've got links in the description to my Amazon affiliate account if you don't mind buying it through that. Amazon will pay me 5% yay

@antsara9218 2 жыл бұрын

awesome!

@Slimsomerville Жыл бұрын

Totally awesome sir.. can I use that tool to remove pro flex sealer?

@Creeksidepatriot Жыл бұрын

Thank you for posting this. I’m a true KZfaq fixer. I’d be scared to attempt some of these items if I didn’t see it done!

@emariaenterprises Жыл бұрын

Thanks.

@jeffsumeracki7263 Жыл бұрын

Outstanding video! Extra high quality installation! However, have the plastic vents you installed 3 years ago disintegrated yet? I've replaced one of my vents twice in 4 years because the plastic was advertised as UV protected but was not. It literally dried out and disintegrated in the sun and wind and left a gaping hole in my roof in less than 2 years. I finally replaced it with a metal vent cover and will never install a plastic vent cover again. I've also added MaxAir vent covers to all my vents for extra water protection.

@johnr5545 Жыл бұрын

Thanks god bless

@Robnord1 4 жыл бұрын

Very nice! 👍👍 I do a lot of caulk and putty tape removal (same type work as you, in Marysville, Wa area) and had not thought of using the vibrating tool. This is going to be a *big* time and effort saver for me. Thank you. : )

@MyRVWorks 4 жыл бұрын

Yes, my Multi Max sees a lot of action. I've got links in the description to my affiliate Amazon account. Happy shopping. Thanks for watching.

@tomforeman4976 3 жыл бұрын

The bit in flush saw is a puddy knife good plan use it under what you are removing instead of lifting and risking a major tear.

@arthurmarion3513 Жыл бұрын

Omg my vent was horrible. I should of taken a photo . It had 4 different kinds of calk and was at least 3 inches thick . I’m so happy that you showed that malti max . That made a huge difference. It was soaked under the calk . I wish I knew where I could find some Aluminum strips like you used to support the roof. Could you let me know . Thank you . Arthur Marion .

@MyRVWorks Жыл бұрын

any hardware store should have metal/aluminum profiles in stock.

@tinkeringwithelectronics 4 жыл бұрын

My roof is an Alpha TPO roof, will the listed sealant work for that?? Thanks for the time spent putting this together.

@MavDawg.gov365 3 жыл бұрын

You should try an electric caulk gun. It makes the self level process and corner caps so much easier.

@mikeringers2556 2 жыл бұрын

Great videos can you use butyl tape to seal the screws instead of self leveling sealant? what kind of sealant for an aluminum roof?

@n2audiodiane 3 жыл бұрын

Thank you for your videos. Would you please show us how to put the butyl tape on?

@KrisVworksforMe Жыл бұрын

Great tips. Question, do you ever use or like the rv sealant tape?

@jennifergulley9285 2 жыл бұрын

Love the videos but I do Need to know how to get the little hand crank for the vent lift off of the old vent?

@larryreno8293 4 жыл бұрын

Class A work as always

@edumaldonado5059 Жыл бұрын

HI, great video... please tell me what kind of screws did you use?

@TC-tw5zk 4 жыл бұрын

I have a alpha roof system...I guess they call for use of there sealants, have you delt with type of roof before? Any suggestions on what to use for cleaning old sealants? Thank you

@hardtruth2039 4 жыл бұрын

I am getting ready to remove 2 vents on my 5th wheel and replace them with maxxair vent. My roof is TPO. What type of self leveling sealant should I use on the TPO? Also what is the best cleaner to use on the TPO?

@aguyandhiscomputer 4 жыл бұрын

18:12 Come on cameraman... Get in close. Beginners want to see how it lays.

@diver4625 4 жыл бұрын

Love your videos. I have a Jayco and one slide I keep finding the carpet wet. I have resealed the bottom joint and still wet. Any ideas and/or video sugestions as to where else to check?

@MyRVWorks 4 жыл бұрын

I worked on a Jayco once and on the outside slideroom they had a profile on the very bottom. We found water was working its way down the outer wall and getting inside of that extrusion. It had nowhere to go but all the way inside to the carpet. We cleaned profile and sealed it really well. Problem went away. See if that doesn't help you out.

@willwong844 4 жыл бұрын

Darren, thanks for another great video. PS can you please post the link for the tools you use? Thanks

@MyRVWorks 4 жыл бұрын

We uploaded the video before I had my tool list made. I have since updated it so check again in the comments section and you'll see all my hyperlinks. Thanks for watching.

@kevinholland4156 4 жыл бұрын

Have you ever replaced bubble acrylic windows on an A frame style Pop up trailer? Did you film it? I would like to know what they glue those in with and are they replaceable. Thanks for your videos they are great!

@MyRVWorks 4 жыл бұрын

Yes, I have replaced them. Sometimes there's an inner and an outer bubble. Typically they are attached with butyl tape and then secure down with screws. Like I've done in my video here.

@susans3411 4 жыл бұрын

I see you on roofs alot. How much weight can a RV/fifth-wheel roof hold? Are there places we shouldn't walk?

@markevans3589 3 жыл бұрын

Great video. How'd you keep your aluminium strips stationary while you used self tapping screws?

@foxmediaagency196 3 жыл бұрын

video mentioned liquid glue

@paultaylor6167 4 жыл бұрын

I have a question about the dicor. If its dark and dirty like grit, and has some cracks in it plus a few screw heads are starting to break thru, can fresh dicor go over it even it I can barely get it clean? Temporarily, I applied some non sag and tooled it down. If necessary, I will remove all the caulk and rework it. This condition is the same for my tow other vents and the vent for the fridge. On my skylight area, there's been a secondary layer of dicor spotting the screws. Its quite cracked throughout. Will self leveling fill it in or should it be removed Its not breaking up or dried out. Thx

@juliekinsella2579 Жыл бұрын

As someone who knows very little about these types of repairs, I would have appreciated seeing how the electric for the fan gets reconnected....otherwise, great video.

@dannidaymitchell613 Жыл бұрын

I just took my vent off but there are a few small holes in the roofing. They are mostly going to be under the tape and vent flange, should I still put rubber patch tape over them or do you think it would be fine with the sealant?

@OkayAhhgain 3 жыл бұрын

Where can I buy a roof vent for my trailer?

@dennisbachman4316 Жыл бұрын

Hi Darren, I am in Baker City, Oregon where it is always baking hot! So I have replaced a few vents with MaxxAir Fans or Fantastic fans. It seems like the butyl tape is always the hardest to get off and end up making a small hole no matter how careful I try to be. I never thought of using the multitool. You make it look easy. I have a 3 speed Dewalt oscilating tool. Do you think that would work just as well or should I use the dremmel version? Also, I plan on using the rapid remover as well. Crossing my fingers because electric tools and rubber roofs together scare me 😱. Thanks for the great video!

@MyRVWorks Жыл бұрын

That Dewalt will work just fine. I use a rigid type blade on low and take my time to work underneath the lip of the vent. If you do Nick the rubber roof, then Eternabond tape could be used to seal that and then you could put your new vent on top of that tape. Good luck!

@hardtruth2039 3 жыл бұрын

What sealants do you recommend for self leveling on a TPO roof? Do you prefer the geocel pro flex product for vertical non-self leveling application?

@neill.m.herbert 2 жыл бұрын

I've had success with Proflex around windows and on vertical seams.

@timh8543 4 жыл бұрын

Will. That technique work on all roof materials. Thanks

@aguyandhiscomputer 4 жыл бұрын

Materials like the fridge vent, skylight, etc or the actual removal of the sealant material?

@BetonTruth 4 жыл бұрын

I now know what my next tool purchase will be .. looks like you can filet fish with that thing... : )

@MyRVWorks 4 жыл бұрын

Yes, that tool really has been amazing in many tasks I perform. The rigid blade is the key on getting that sealant off. In the description below the video I've got my Amazon affiliate links. If you get one through that Amazon pays me 5% yay!

@kfink77 4 жыл бұрын

How do I know if my roof is able to support human weight on it

@arlenewolf5260 4 жыл бұрын

Will the EPDM sealer seal to TPO?

@MyRVWorks 4 жыл бұрын

That is manufacturer-specific. I believed Dicor® products will and there are a few others that will, XTRM® comes to mind. The product I use Geocel® SSL will not adhere to TPO but there non self-leveling will. So just take a minute and read the data sheets for these products to find out what will adhere to TPO.

@kelseyhensley 3 жыл бұрын

what do you use on fiberglass roofs for sealents? PVC roofs?

@sandracote9548 3 жыл бұрын

Kevin I am trying to find the same. Any luck for fiberglass roofs other than divorce which has peeled off to easily.

@nonegeo 4 жыл бұрын

Love your videos BUT where's the list of tools? Am I missing something?

@MyRVWorks 4 жыл бұрын

We published the video before I got a chance to upload the links. They are there now so have another look in the description section under the video. Thanks for watching!

@ronforster1130 4 жыл бұрын

What type of blade did you use on your multi-tool? Was it a metal cutting blade or a smooth blade? Thanks

@ronforster1130 4 жыл бұрын

Nevermind, I found your link.

@frankenstein3163 4 жыл бұрын

My EPDM or the other ruber roof looks ok. But I have a spot wear it looks like a branch poked a hole and than was calked(lap sealant). I just noticed that the ply wood it badly rotted about 1 foot across. it feels like some of the wood framing might also be rotted. Should I just peel the roof back(can it be reused ?) and replace the wood or just do the EPDM rubber roofing coating system ? I live in it and have lots of rain coming withing a few weeks. I can get a carport tent with clear tarps to work on it. I need to do some lap sealant and the EPDM rubber roofing coating. What one should I do first ?

@MyRVWorks 4 жыл бұрын

When you pull the rubber off the decking it will destroy the rubber. An idea that you could try is to isolate the damage part of the roof. Cut that section of rubber straight across. Replace with new decking and then get new rubber and the glue to apply over the decking. To mate the old roof to the new roof take a look at what a lot of Manufacturers use for the front and rear caps. There is an aluminum Extrusion that you can get to apply over your rubber and bond the old with the new. That might be a simple solution for your application.

@rickl6697 2 жыл бұрын

Was that mutitool blade a smooth edge (like a putty knife) or did it have fine teeth?

@MyRVWorks 2 жыл бұрын

Smooth and rigid

@arlenewolf5260 4 жыл бұрын

Hi can you please share with me what make and model you were in. I want to order that towel rack that was mounted on the bathroom door, from that manufacture.

@MyRVWorks 4 жыл бұрын

Oh boy, that customer has traveled onwards to Montana. Sorry but I won't know that information.

@arlenewolf5260 4 жыл бұрын

Daren, Is there a chance you have a contact number or email address for them. I really want to attempt to order that door mounted towel rack from that manufacture. Maybe you could reach out to them and ask. If I had the manufacture, and model I could attempt to order it. I have not seen that towel rack on any of the rv's I have looked at. That towel rack is a real space saver. If you could even order it, if you got the info, I would pre pay you for it and you could make a buck and ship it to me or have it drop shipped to me. Thank you.

@cbkb983 4 жыл бұрын

I was told that if you don't have a ladder on your RV/trailer then don't go up on your roof. Then how does the RV shop make repairs? I would personally like to do my own repairs or replace sealants and save a bunch of money. Any suggestions Darren?

@kfink77 4 жыл бұрын

Im wondering the same thing. Maybe using ladder standing at the sides?

@fotoschidas4536 Жыл бұрын

Are those cleaners safe to use on all rv roofs?

@MyRVWorks Жыл бұрын

When you're picking the cleaner, make sure it could be used on EPDM rubber. All the products that I use on a roof have that ability. If you use the wrong stuff you'll know pretty quickly because the roof will start to Bubble up. Basically you're working with bicycle inner tube material. That's what the EPDM is.

@rjw8316 2 жыл бұрын

Isn't the flexible roof membrane supposed to be glued down by the mfr?

@MyRVWorks 2 жыл бұрын

Yes, what we find so is that the decking that the membrane is glued to de-laminates.

@jdright1157 4 жыл бұрын

Curious... How old would you say that Lance is?

@MyRVWorks 4 жыл бұрын

The Lance is a 2007.

@chevyvantravel9735 6 ай бұрын

hi. so you just said that silicone doesn't bind to rubber, but they sell that 450 henry silicone cote and people use it for their rubber roofs ...any explanation for that? thank you

@MyRVWorks 6 ай бұрын

Read the label. If the label states specifically that it will bond to EPDM or TPO you should be okay. Otherwise I would keep looking until you found a product that does list that. Dicor and Geocil are the two companies that we use in our industry that make sealants that are rated for EPDM and TPO and that is what I would recommend. amzn.to/3RQ6CRA

@WonderWhatsNext 4 жыл бұрын

Can you share some info what to do if your slide wiper seal is not touching the slide on one side? I sent my unit into the factory to have the door side wall replaced due to delamination, and when I got it back the kitchen table slide has one wiper seal not touching the slide at all. Do I just go with a larger width wiper seal on that one side as the other side is fine. I think what the issue is the hole for the slide on the new wall is to large.

@MyRVWorks 4 жыл бұрын

Well that's a dicey question. I am wondering what type of a slide room mechanical system we're working with here. Because that does change the answer. For example, a Schwintek has very exacting dimensions for either side. But the Power Gear for example can have a little slop. I have seen where the slide room, as it's extending and retracting, will start to favor one side or the other which is a function of the rollers being off-kilter a little bit forcing it to run forward or aft. Does it look like the side that's touching could be pulled off of that side a little bit and share it with the side that's not touching? Worst case scenario you could always get wiper seal that has longer wipes. But that stuff's about $10 a foot. So be advised.

@WonderWhatsNext 4 жыл бұрын

@@MyRVWorks Thanks for getting back to me. I probably should have provided some more detail on the slide type. It is an LCI through the frame gear one (not sure of the name) but it does appear on the bottom of the slide that I can loosen a couple of bolts and adjust the horizontal position. I read the manual for the slide and it says that is what should be done when the slide is not center in the hole, which I guess is my issue here. I am just now wondering what a shift horizontally about 1 to 2 inches will do the slide topper alignment if really anything.

@MyRVWorks 4 жыл бұрын

@@WonderWhatsNext adjusting those brackets is a study of high school geometry. Make sure you give enough time to work all the angles. You have to adjust both in and out. It's frustrating when you get it to work perfectly in and then you run it out and it gets binded. As far as the slide topper, that is the least of your concerns. Where the slide topper attaches to the RV it is slid in a gutter type track. You'll find a screw holding the fabric. Just remove the screw re-center your Fabric and put the screw back in to hold the fabric. Good luck happy camping.

@hankdeannalovato661 4 жыл бұрын

very informative, THANK YOU!!!

@reeacc8332 4 жыл бұрын

I couldn’t see the links for what you used.

@MyRVWorks 4 жыл бұрын

The video got uploaded before I had my links ready. It's all been updated now so have another look on the description below the video and you will find them there thank you.

@chrislarson3123 4 жыл бұрын

Tool links?

@MyRVWorks 4 жыл бұрын

We uploaded the video before I head that ready. Check again we got that on there now.

@facelaw674 4 жыл бұрын

Hi there I have a question for u I heard u shouldn't get up on a rv roof with your shoes on it can damage the roof some how is that tru or have u heard of that before

@aguyandhiscomputer 4 жыл бұрын

Nah, shoes are fine. Just keep the sharp objects away from it.

@facelaw674 4 жыл бұрын

Ok thank u for your answer

@sanity8311 4 жыл бұрын

With all the roof vent types do you find the white plastic or the smoke ones lasting longer.

@aguyandhiscomputer 4 жыл бұрын

It's best to put a vent cover over it. I like to leave both roof vents open all the time to keep the air flowing.

@sanity8311 4 жыл бұрын

@@aguyandhiscomputer I've got an air max cover but you still can get them in different colors. Just what seams to last the longest is what im wondering.

@aguyandhiscomputer 4 жыл бұрын

@@sanity8311 ok, I agree, seems like the white would stay cooler and not dry out as fast but they sure do use a lot of black ones. I'll take my chances and stick with black since they block the morning sun 🙂

@sanity8311 4 жыл бұрын

Yea that morning sun sucks when trying to sleep in a little

@kfink77 4 жыл бұрын

If you dont need the natural light wouldnt it be better to get a metal one?