Mysterious Ash - STIHL MS661 ft. GRANBERG Bar x Alaskan Chain Saw Mill setup
Рет қаралды 27,637
Жыл бұрынIn this video, we sawing first part of Big Old Mysterious Ash log into slabs, a large Ash log 1,2m wide using Stihl ms 661 chainsaw and GRANBERG Extra Long Bar with Alaskan Mill setup.
I would like to ask you kindly, help my channel to grow by simply subscribing to the channel!
Thank you!
Big Old Mysterious Ash log - Part II : • STIHL MS661 ft. GRANBE...
Cutting the most beautiful Burl Tree with the Alaskan Chainsaw Mill : • BLACK POPLAR Burl Tree...
@vetwood Жыл бұрын
Nice job
@MariaOliveira-yv9hr Жыл бұрын
Massa!! Stella do Brasil
@flobrka 11 ай бұрын
Nee Maria, não temos massa, só boa vontade :D
@flobrka Жыл бұрын
Big Old Mysterious Ash log - Part II : kzfaq.info/get/bejne/aZiZg9pqr-CVcoE.html Cutting the most beautiful Burl Tree with the Alaskan Chainsaw Mill : kzfaq.info/get/bejne/fa-hh8ph2K7Mp3U.html
@horsship 17 күн бұрын
What length of bar do you use on your MS661? I have a MS660 and use a 36 inch bar but would like a longer one. Thank you.
@flobrka 16 күн бұрын
We used a 74 inch Granberg bar, a little too much for that ash of 47inch 🤣
@horsship 16 күн бұрын
Thank you. That 661 had no issues with that long bar. Awesome.
@ugurbinbay9986 Жыл бұрын
where can i find the tool that attaches to the saw
@flobrka Жыл бұрын
www.chainsawbars.co.uk 😉
@terrymcguire8476 Жыл бұрын
Why do you keep using the ladder on each run ?
@flobrka Жыл бұрын
so it's not necessary, but if you look at each cut, we used a ladder to get one side of the cut straight, because for some reason the undercut was at the end, and as we pushed too much, we got a slightly twisted first cut, so then we used a ladder on each cut to get as straight cuts as possible
@NathanVdV Жыл бұрын
metal on metal slides also much better than metal on wood. less friction less harder to push (a winch would be my first purchase anyways).
@flobrka Жыл бұрын
@@NathanVdV Yes, the winch is a good thing, I agree, we have it mounted up there, but when the logs are so wide, it's a little easier when there are two of us, I don't know why, but it's easier for the chainsaw to have a nice constant cut and not struggle at low revs
Oscar's Funny World
Рет қаралды 174 МЛН
Nathanael Griffiths
Рет қаралды 24 М.