Cheap and small but prints great: Kingroon KP3S 3.0 3D printer

Рет қаралды 11,904

Күн бұрын

Review of KP3S 3.0 3D printer by Kingroon: This small and cheap 3D printer was very pleasent surprise. The print quality is great, easy assembling. Highly recommended for begginners but also as extension to print farms. It still has some space for improvements, but more details in the video.
Visit Kingroon's website (not affiliate link):
kingroon.com/products/officia...
Coupon code 10% off: MTFun
Objects from the video:
Handle: www.mytechfun.com/video/239
Doorstop: www.thingiverse.com/thing:124...
Trashcan: www.thingiverse.com/thing:380...
Pin support challange video: • Pin Support Challenge ...
Conclusions:
0:00 Introduction, specs
1:01 Unboxing
1:47 Assembling
2:34 Overview
4:40 Whats inside?
5:31 Final checks
6:02 Power ON
6:15 Leveling
7:36 Inserting the filament
7:56 First print
9:35 Setting Cura slicer
9:53 Calibration cube
10:29 Benchy
11:12 Noise check
11:29 Spiral vase mode printing
12:15 3D printing on max Z
13:48 Pin support challenge
14:28 Printing from PETG
15:42 Testing the handle
16:19 Installing the handle
16:51 3D printing from TPU
17:48 Power consumption
18:40 Conclusions
#kingroon #3dprinter #3dprinting

Пікірлер: 37

@danielb5081 29 күн бұрын

Thanks! a most excellent review. I just pick up a used one (as-is parts only) which is my first 3D printer for $50. to fix it I only had to repair the 4-wire cable between the main board to the extruder cuz one of the wires was open. I also had to replace the missing heat block throat nozzle and build surface plate (I didn't get the soft Kingroon one that comes with the printer). Though I am just getting started it appears to print the few objects solely for testing very well.

@kevinsavasci7311 Жыл бұрын

Bought one last week and got another one delivered today, $207 AUD each.

@hrvojehorvat9099 Жыл бұрын

have a kp3s 2.0 that i updated to a 3.0 about a year ago, had it for over 3 years in total, hands down the best buy in my life, love the little guy 😊

@vastinkelter1393 Жыл бұрын

I was just watching and be happy about such a thorough review. I am actually about to buy a pro version to get my kids used to 3d printing.

@CodyIrons Жыл бұрын

Great review, nice little machine, that build volume is nice and that you can sneak the Z on up to 200mm is great too. If i didn't already have a bunch of ender 2 pros i might consider this one.

@AwesomeBrixx Жыл бұрын

Very interesting! Maybe a good idea for someone that just wants a decent, cheap printer

@aktronics Жыл бұрын

Surprisingly good for it's size, nice.

@olak329 Жыл бұрын

thanks for the details assembly, u had helped me with my kp3s 3.0. im having problem the print is staying on the same layer, then found your video and figure where i do wrong, i didnt screw the x axis

@creativ01 Жыл бұрын

Nice and detailed review. I have just ordered KP3S Pro - the upgraded version of this printer. It has available Y-axis linear rail addition, so you can have all 3 axis with linear rails, it has build-in power supply in frame, it has bigger print size 200*200*200 and X and Y belt tentioners. Also it will come by default with glass bed, but you can have PEI sheet as addition. Everything else is same as on this K3PS. There is also "official" tutorial from Kingroon to run this printer with Klipper which should be even more interesting and will better use the potential of this printer. Now with haloween/11.11 sales and coupons it was able to have Pro version with Y-axis and PEI sheet for around 200$/€ :)

@MyTechFun Жыл бұрын

Hm, now I am thinking, why I got the older version for the review. I must be too small channel.

@creativ01 Жыл бұрын

@@MyTechFun :D I think both printers are good. Only Pro version has upgrades which most people would like to see on standard version.

@damustermann Жыл бұрын

@@MyTechFun I don't think so, they are not available in Europe until late December, so they can't generate sales for the Pro. I guess they have a lot of the non-pro sitting in warehouses, so they send them out for exposure. I bet next year they send you the pro version when they are available everywhere.

@creativ01 Жыл бұрын

@@damustermann I was ordering Pro on 2nd November when they just became "in stock" in EU warehouse (by their website), few days before there was status of availability set to early November for EU warehouse. It was told to me by their chat that printers just arrived to Germany and will be shipped soon. I hope thats true, because i have noticed that stock date was changed to 16th december (it appeared there just 2 days ago).

@damustermann Жыл бұрын

@@creativ01 I contacted them in September, and they told me they can't get a printer to me (in Germany, too, Moin ;) not before late December. I got a Tronxy Crux1 instead for 130€ as a Warehouse-Deal on AMZ. Poor thing will be modded to Oblivion ;) I hope you get your Pro ASAP, I think they are the best Cantilever Style printers out there (if they really exist).

@Grimm0ne Жыл бұрын

Probably the best in depth review on the Kp3s, but I find it silly that this is the printer Kingroon decided to send out to various youtube reviewers lately. Why not send out their new models? Interested to see your review on the new pro, but don't waste your time on the Kp5l, it needs some serious love.

@MyTechFun Жыл бұрын

Hm, yes, I must be too small channel. But this is big improvement, previous two products from Kingroon were LED and Lac spray ;-)

@GaborFlandorffer Жыл бұрын

thanks for sharing

@EDZEN94 Жыл бұрын

Man.. I have the urge to buy a printer like this so I can have it on my desk for quick prototyping but I want something enclosed, imagine a bambu lab x1 mini in this size :O

@lolzlarkin3059 Жыл бұрын

Voron 0.1?

@ThomasS17 Жыл бұрын

I second the Voron 0.1. If you have the time/skills/willingness to build one, and the 120mm build volume is enough, it's exactly what you want. Edit: v0.2 should be out soon, too, but not sure what the exact upgrades are.

@BIBIwood Жыл бұрын

It would be interesting to do a side by side comparison with the Tronxy Crux 1.

@g4egk Жыл бұрын

See Nathan Builds Robots review of the crux 1, the steel wheel motion system introduces ringing on the surface quality. I've not seen anyone running klipper on the tronxy board either. It does have belt tensioners that the KP3S lacks.

@Cobesh Жыл бұрын

21:17 Just loosen the fan screws half a turn.

@tupinikeebs 9 ай бұрын

Am I insane for wanting to return my SV06 for a standard Kp3S? It seems I am not using all the space that the SV06 provides, and the Kp3s is the perfect size, and also twice as cheap. I just dunno how it fairs with ABS which I do sometimes need to print, wouldn't mind upgrading the hotend to an all metal or bi metal tho.

@AndrewHelgeCox Жыл бұрын

Can you get TronXY to send you their CRUX 1 to compare? These two seem to be the leading cheap Prusa Mini alternatives. That one has belt tensioners, an internal PSU and conventional attached spool holder for a neater package but lacks the linear rails. Would be interested to hear your take on pros and cons of each.

@MyTechFun Жыл бұрын

They contacted me approx 5 months ago and I accepted the review request, but no words from them since that. Usually these companies send the same request to 100x places, and they select more popular ones..

@AndrewHelgeCox Жыл бұрын

@@MyTechFun That's not great behaviour from them 😕

@carlos.galhano Жыл бұрын

Olá, excelente vídeo. Eu gostaria de iniciar no mundo da impressão 3D, acha que para um iniciante essa impressora seria uma boa compra? Tenho algum receio na montagem da mesma, acha que as instruções são fáceis de seguir para quem não tem experiência? Obrigado

@MyTechFun Жыл бұрын

The assembling is easy, there are several options I could suggest: Kingroon KP3S (newer version), Sovol SV06 Plus, BambuLab P1P (depend of your budget)

@carlos.galhano Жыл бұрын

@@MyTechFun to me, it Will be for Arduino projets, to make some boxes with sensors for now.

@thearchitecht2122 Жыл бұрын

I have a question: I have mine leveled, but the middle (point 5) hits the bed, even though the other ones are all leveled. Any advice?

@MyTechFun Жыл бұрын

Check is any dirt below the pei sheet in center. Or just use 0.3mm on first layer, less sensitive to errors.

@thearchitecht2122 Жыл бұрын

@@MyTechFun Thanks for your reply. didn't expect any as you have a lot of comments around your videos. I checked and there is no dirt. I replaced the PEI sheet with a glass one but the results are the same. Some research suggests it could be the x-axis sagging as the head is heavy. I'm a newbie to 3d printing and I have no idea where to start with that so for now I just print with a raft which seems to alleviate the problem.