MZR 2.0 and 2.5L valve clearance measurement
Рет қаралды 28,755
9 жыл бұрын
@ST-qe6pp Жыл бұрын
In my opinion he speaks clearly and his speed is just fine. Thank you for posting this info.
@Devo1987 Ай бұрын
I'm assuming you can use zddp additive because the 2006 Mazda 3s 2.3L engines have flat tappet lifters not hydraulic is this correct?
@nskim6444 7 жыл бұрын
how do you adjust them if they are not between minimum and maximum range??
@rightlanebandit9844 4 жыл бұрын
you get the correct size tappet dealer sells different sizes
@jules9301 5 жыл бұрын
Yeah how do you adjust them??? I am struggling. Greetings from Germany
@Trainwheel_Time 2 жыл бұрын
You have to get the appropriate size tappet (lifter) to bring the clearance into range. The dealer sells them.
@richfjr1300 11 ай бұрын
@@Trainwheel_Time i think he means the procedure to switch them out, get yourself a good manual as you have to remove the camshafts to remove the tappets (and critical to keep the engine in time as the cams and crank will basically be free to move, basically don't do it unless you really know what your doing)
@tomrodbend7733 3 жыл бұрын
You said 3.5 L but in the description is says 2.5. Could you correct please
@arlolusk558 5 ай бұрын
It’s a 4cyl engine, obviously not a 3.5L
@olas2012 5 жыл бұрын
Thanks for the vid but geezus you talk slow
@jagboy69 Жыл бұрын
bitchbitchbitch... Where's your video?
@mitchellsteindler 10 ай бұрын
Cool you can leave
ColdieGarage
Рет қаралды 11 М.
Baxrok2
Рет қаралды 87 М.
D1NAZ02
Рет қаралды 3 МЛН
Auto Repair Guys
Рет қаралды 1,3 МЛН
TheRepairSpecialist
Рет қаралды 87 М.