MZS Levers. DRZ400SM Install!
Рет қаралды 11,217
2 жыл бұрынThese are surprisingly good. Ridden with them about 100 miles so far. Operate smooth, perfect size. Looks like good quality to me.
MZS Dirt Bike Clutch Brake Levers Pivot Adjustable CNC Gold Compatible with DR200S 2015-2019 | DR250R 1996-2000 | DRZ400 DRZ400S DRZ400SM 2000-2021 | DJEBEL250XC 1998-2007 www.amazon.com/dp/B09571PFLT/...
@linksgarage1985 2 жыл бұрын
I know I said throttle side on the clutch side. Oops!
@DavidGoodman-q7e Күн бұрын
Hey, Thank you for the clean installation video. Greatly appreciated.
@linksgarage1985 Күн бұрын
@@DavidGoodman-q7e no worries man. Thanks for watching!
@BrutalOwls 2 жыл бұрын
Just installed the blue ones thanks to your video. This was my first mod, thanks for the detailed walkthrough 🤙
@linksgarage1985 2 жыл бұрын
Hell yea! Thanks for watching!
@RedboneUnincorporated Жыл бұрын
How have they held up after 11 months?!
@cplsanders69 Жыл бұрын
Wow thank you so much for this video, I was intimidated to change the levers thinking I had to fuck with throttle and clutch cables you made it look soooooo easy I’m about to head downstairs and throw mine on thank you ❤
@linksgarage1985 Жыл бұрын
No problem! Thanks for watching!
@murlyn2 Жыл бұрын
Great work on your videos and your straight forward approach. I subscribed.
@linksgarage1985 Жыл бұрын
Hell yea! Thanks for watching I appreciate it!
@claddagh1000 Жыл бұрын
I have the Same ones , going on 5 years and just lubed all the moving parts along with any contact points. No issues
@linksgarage1985 Жыл бұрын
Hell yea
@East_TX_LCR 2 жыл бұрын
I love mine, had on for 9k miles, no complaints.
@linksgarage1985 2 жыл бұрын
Hell yea! Thanks for watching I appreciate it!
@DeadZoneGaming 2 жыл бұрын
So is it true that they are extremely dangerous to use because they can cause break failure
@linksgarage1985 2 жыл бұрын
@@DeadZoneGaming even ASV levers can fail. Maybe maybe I’ll buy some of each and torture test them and film it:
@RedboneUnincorporated Жыл бұрын
I have been beating the hell out of my ASV levers on KLX300r for two years of off road and they are still fine. Likely going to try these on my 23 Dizzer.
@KenRupin Жыл бұрын
Great tutorial! Thank you!
@linksgarage1985 Жыл бұрын
Thanks. I appreciate it!
@emperor91108 Жыл бұрын
Thanks for the great video.
@linksgarage1985 Жыл бұрын
Thanks for watching!
@recnutz8073 5 ай бұрын
Easy enough. Time to install.
@linksgarage1985 5 ай бұрын
Boom
@ayydubbx6076 2 жыл бұрын
Sick video bro. I just had to order them when I seen that they were 40k gold lol. I’m waiting for an aluminum throttle tube to come in so I can install my grips.. that factory throttle tube is stupid as fuck!
@linksgarage1985 2 жыл бұрын
Yea! I ended up cutting mine off. It was a pain in the ass!
@theHeath Жыл бұрын
Careful of brake lock-up because of pin fitment not engaging brake properly. Look it up on KZfaq. It happened on my CBR 600rr but luckily I was only rolling a couple mph then complete front brake lock-up. Just FYI brother🤙
@linksgarage1985 Жыл бұрын
Yea. I’ll prob swap to ASVs sooner or later. Tried to go budget first. But I’m still happy with them so far a year later!
@StoredJT 4 ай бұрын
Bought my Drz used, these levers came with it but are lose feeling on the bike like it’s got a gap in between the frame and the lever. Think a washer work? I can’t find one thin enough thob
@linksgarage1985 4 ай бұрын
I’d be very careful with anything you do with levers or hand controls. They are critical. A washer may cause something to bind up or stick. It could put you down fast. I actually swapped those out for a set of ASVs. And they’ve been great. Good luck bro.
@davidhoward8951 7 ай бұрын
How do you adjust the clutch and the brake when you stick these pilot type levers on your bike
@linksgarage1985 7 ай бұрын
I showed how to adjust them in the video.
@matthewrylee8638 2 жыл бұрын
I have those on my KLX300, good levers!
@linksgarage1985 2 жыл бұрын
I’ve got a couple thousand miles on them so far. ZERO complaints! Thanks for watching I appreciate it!
@matthewrylee8638 2 жыл бұрын
@@linksgarage1985 Yeah man I dig your DRZ content, I just sold my 2005 ZRX1200R for a DRZ400sm. Your videos are helpful!
@matthewrylee8638 2 жыл бұрын
Your Rip It energy drink mod cracked me up, I haven't seen one of those since I was deployed.
@linksgarage1985 2 жыл бұрын
@@matthewrylee8638 dude! The ZRX is one of my dream bikes. Wanted one forever! And thank you! I appreciate you watching!
@linksgarage1985 2 жыл бұрын
@@matthewrylee8638 nothing like 8oz cans of rip it’s on pallets!!!! 🇺🇸💪🏼🇺🇸
@MrKikkomon 2 жыл бұрын
good video
@linksgarage1985 2 жыл бұрын
Thank you! I appreciate you watching!
@DamnWelfareBums 2 жыл бұрын
It's starting to get nice out. You racking up the miles yet ?
@linksgarage1985 2 жыл бұрын
Over 1k brother. And will continue to climb.
@TEExCASH 2 ай бұрын
Yo Link, should i grab a pair of these
@linksgarage1985 2 ай бұрын
They are. It that bad. I did swap to some ASVs. And there is a huge difference. But you pay for it. I did like these better than stock.
@keekee4180 Жыл бұрын
Did you replace the throttle tube to put the pillow tops on?
@linksgarage1985 Жыл бұрын
I did not.
@keekee4180 Жыл бұрын
@@linksgarage1985 copy, thanks appreciate it
@linksgarage1985 Жыл бұрын
But it was a total pain in the ass. I had to slice and dice it off in about 1,000 pieces.
@Bibby723 Жыл бұрын
Yoooo Link! How these levers holding up for you?
@linksgarage1985 Жыл бұрын
Like a damn champ.
@Bibby723 Жыл бұрын
@@linksgarage1985 🤙🏼
@Indecline099 Жыл бұрын
What bar end weights are those?
@linksgarage1985 Жыл бұрын
In this video. Factory SM
@DeadZoneGaming 2 жыл бұрын
So I’ve heard that apparently these shouldn’t be used as they are extremely dangerous because the can lock up the break. I bought some but now I’m nervous to use them so I guess I kinda wasted my money.
@linksgarage1985 2 жыл бұрын
I’ve had no issues. Good luck!
@blanemccurdy566 2 жыл бұрын
You can't believe everything you hear on the internet 😉 honestly I don't see how these could do that but I'm not a professional. Just installed these today so if I'm on the news know it was these that got me
@DeadZoneGaming 2 жыл бұрын
@@blanemccurdy566 for reference these are the videos I saw about them… kzfaq.info/get/bejne/ntidfLabu6zbpHk.html kzfaq.info/get/bejne/jNqXqqaCtsfGgok.html
@bradleysodee5221 11 ай бұрын
Will the switch still work without the spring?
@linksgarage1985 11 ай бұрын
Yes
@bradleysodee5221 11 ай бұрын
Thank you! Just got a new switch in mail as mine was toast and works good as new!
@linksgarage1985 11 ай бұрын
@@bradleysodee5221 glad to hear it!
@frankmischler4424 Жыл бұрын
I just picked up my drz and noticed a little into the throttle it feels like it gets stuck and than breaks this wall and moves freely any idea what it could be
@jessel1217 Жыл бұрын
Stay clear of these. They have snapped on me during braking. MZS look cool as fuck, but do NOT buy these cheap aftermarket levers when your life depends on them. Stick to OEM or Zeta! Edit: There are a lot of videos on why you should stick to OEM levers and numerous bike shops have backed this up as well.
@linksgarage1985 Жыл бұрын
Sorry for the experience. Sounds like I need to buy some different levers and torture test them.
@jessel1217 Жыл бұрын
@@linksgarage1985 - Lookin out for ya bud. They caught my eye at first but I quickly noticed reduced braking power since there’s less leverage (less tq.). Switched back to OEMs and it just feels right. Maybe that’s why levers have looked the same since forever who knows
@gabrielestrada9291 3 ай бұрын
I heard the bearing gets stuck is that true???, do they lock up??
@linksgarage1985 3 ай бұрын
Mine didn’t. But I switched to ASV levers.
@RedboneUnincorporated Жыл бұрын
you still running these? any issues?
@linksgarage1985 Жыл бұрын
I am still running these currently. Zero issues. However I do have a set of asvs on order. Just for comparison sake.
@RedboneUnincorporated Жыл бұрын
@linksgarage1985 I pulled my ASV's off of my KLX and they did not work on the DZR. I have the F2 shortys. Maybe you'll have better luck, or a different model! I'll keep an eye out for the vod! tyvm
@linksgarage1985 Жыл бұрын
@@RedboneUnincorporated I ordered the FRs. Said they would fit. We will see!
@RedboneUnincorporated Жыл бұрын
@linksgarage1985 hmm, I never saw any called FR! Typo? C5, C6, F2, F3, and F4 are all the lever models they list on their website. Either way, I'm excited!
@klxcountry Жыл бұрын
@linksgarage1985 After this convo, I canceled my order for the MZR and got on ASV's website and found sku BCF21610-SK, and they fit perfectly on my 2023 DSR 400S. Went my first ride today, so much better than stock, love 'em!
Sportbike Track Gear
Рет қаралды 300 М.
Quantum Tech HD
Рет қаралды 247 М.