This is how to do a full alignment of the 80 Khz final IF strip.
There are 6 IF cans to align.
Set the generator at 80 Khz.
Start at the rear cans of the radio and move to the front.
Keep the s-meter at S-5 by reducing the generator output.
Attach to the 2nd IF at the output of the Q-multipler. There is coax there. Couple
the generator thru the insulation of the center conductor wire and that might be enough.
The IF selector is set to 3.
The band setting DOES NOT MATTER but maybe take it to 220 band.
The Select has to be OFF.
Set CWO to middle or straight up.
Tune all 6 cans / slugs for best S-meter signal reducing signal generator to maintain S-5