So lovely to watch a video that doesn't start with "Heh Guys!"

It was delightful to see a traditional way of printmaking. Wonderful video.

I did this in college (I study arts). The results were very beautiful

I've just been to an exhibition of George Cuitt's work at Grosvenor Museum, which had lots of focus on his life and focus of his work but I saw nothing about how actual etchings were made! This was fascinating and made me appreciate his work even more.

I was very grateful to have learned these techniques in high school. So many ways to create 💕

Without KZfaq, i would know nothing about this and walk around like a know-it-all without shame. Thanks for posting!!

Wonderful to see a technique that doesn’t involve a computer, $$$$ worth of software, and a laser printer or vinyl cutter… although I guess the press isn’t something everyone has at home ;)

Lovely. My friend died in October. She left me a 2003 Laurie Rudling piece . THE FURROWS. Its so atmospheric.

Simply and beautifully presented Yes presentations don't have to be talent shows which I hate

My grandfather used to etch a lot. I even made one myself at his workshop.

How satisfying to watch.

Thank you explaining the process of etching.

A very clear explanation. A lovely etching too.

subsequent, his favorite adjective

So basically like old version of printing

Thank you, this is so educational!!

A clear introductory video...however, maybe helpful to further explain a general length of time in which the plate was submerged in the bath which one assumes is basically a 50/50 mixture of copper sulphate/table salt in warm water. [usually 50 gm each in one litre of water although others prefer 100gm each mix for something stronger]; was it aluminium or zinc plate...? Also, perhaps explain the ue of tarlatan/chees cloth etc as well during wiping process. Also variance of times for a clear line as against an aquatint etc which is of course a different procedure. All the best.

I am reading a book and one of the main characters is a Teaching Assistant in Art who specializes in etching. I literally search this bec im so curious, the art is so beautiful indeed.

What a process!

Thanks for this beautiful video showing this art in making

Jeopardy and Queen Victoria brought me here! Lovely

Great video! Thank you

I want to preserve a copper etching that my mother created in 1946 when she was in school, her age was 12 at the time. How would Like to Matt & Frame frame it , for museum quality so it will be preserved. How would I accomplish this ? It’s a copper sheet close to. 8 1/2 x 11” . The copper is approximately .25”

Look up Gérard Edelinck if you want to see some truly amazing copper-plate engraving!

This is a great video, very helpful!

I have a picture of the last supper with Jesus, it is on metal, there is etchings surrounding it that have been etched evenly, appears to be machine made since the precision is so fine. To me it is a very vibrant colour and very beautiful picture as it has all the names of those seated at the table on the hem of the table cloth and the signature has a black dot, with these letters Shilpa with copper tones and silver. Would you know anything about this?

I adore the process of fine arts etching, and enjoy watching even though I am already a very experienced etcher with etchings in museums and notable collections. Not wanting to come across as unduly critical, but seriously almost every step shown here is not done correctly. I wanted to step through the screen and say "no, not like that". Well, thanks for posting anyway, there is always time to improve techniques.

Thanks for this.

Witam bardzo ładnie pokazane.Ciekawa technika. Pozdrawiam serdecznie Marek

im going to print some money

Awesome ❤️❤️

Hi I have previously tried copper sheet etching and although it did work, it wasn't brilliant, my process was similar to your's where I drew a design onto copper sheet which had first of all been scratched with steel wool, then I drew a design on to it using a permanent black ink marker pen, then it was put into a ferric chloride solution for an hour before being rinsed in a water bath with baking soda to stop the etching process. After it was dry I tried various inks on the few pieces which I had just etched but none of the inks worked, they just ran off the metal, I then applied my Sharpie permanent ink pen onto two of the pieces and then tried to wipe the ink back off, the results of the ink on the etched pieces was poor even though the etch itself was quite good. I have to say at this point that I am NOT trying to use the etched piece to transfer to rollers for transfering onto paper, I am only etching copper sheet for designing copper jewellery but from what I can see, the process is the same. In your tutorial I am puzzled as to what two things are ????? the first black stuff which you are applying to the metal what is it and where can I buy it ? (I'm in the UK too) 0:01 you refer to it as "Hard Dark" but I cannot quite make out the small print on the tin you are opening ??? and you say that it is a type of wax ground ??? it looks more like shoe polish straight out of the tin ??? and what is the solvent which you use to remove the acid ?? Your pieces look amazing Best regards Glen

Fascinating

So much work

Woooowww 💓💓

Obrigado por postar... belo trabalho.

I do this in University. I study Fine Arts with an orientation in printmaking. I was wondering what the solution you submerge the acid in is? In my university we still use acid and I know it's highly toxic. I'm starting my thesis and was wondering if their was a less toxic alternative to acid.

❤

i need to watch this video for school

Why the piano music? Cant hear the information...nuts

best bitumen diluted a bit in gasoline, paint over, dry and scratch the pattern, letters, it is possible under a microscope, and etch ....

My school teaches this. This is easier to understand. Sangkyuu

wow!

Didn"t understand the moment with the chalk on the printing press

what is the difference between this technique and william blake's relief etching? thank you in advance.

What wax are you using and where can I buy it?

very interesting

I did etching but in semiconductor

Is that an aluminum or zinc plate?

Wow!

Are you sure you don't need a particle accelerator for that?

this is how we etch

PUT THAT ON O.F.

Was this the only way to make copies of drawings in the 1800s?

I came because of Tera online...

Good

👍👍👍👍

but It may be faster to draw with pen on paper? :P

Is this what Gustave Dore did?

how basically you do all of that just to print it on a piece of paper? rather than just drawing it on that piece of paper?

it is really a tough job

I am genuinely puzzled. This seems rather laborious, yielding a dubious benefit. I mean why paint with ink forced into a scratched surface when you could just PAINT the ink directly onto paper with pen or brush? I mean, the etching you produced with this method doesn’t exactly look like something Martin Lewis would produce. So, why bother? Then, we have to ask ourselves…why did Edward Hopper himself walk away from this process if it is supposed to be so good?

Nyimakk...

लेटर प्रेंटिग प्रेस (ब्लँक मेकिंग)

My brain is so sad that something about the sheer number of steps, the way it is narrated, and the way this is shot reminded my brain think of How To Make a Plumbus lmao

why do all of the wax and all that.. seems for how rough the drawings are in this it could have easily all been done just with dry point right? I think you are using a bunch of extra processes for no reason

What a load of effort for something painfully underwhelming.

Well sure but who taught this fellow how to wipe a plate? That was painful to watch.

Русские вы где?

a little rube goldbergian for my taste but ok...

Napıyon hacı sen hiç mi işin derdin bakman gereken hastan çocuğun falan yok kafayımı yedin

Subsequent 🙄

Perdida de tiempo

Excessive precaution is boring.

Иди на работу

All that work for a rubbish picture

thank you so much for the video it was lovely but seriously, that drawing that you used as an example was awful, I was expecting something more artistic

thats just the stupidest kind of art ive seen in my life... those are some lazy artists

Probably the most overrated, inefficient, and expensive forms of printing, and for that, as an engineer who spent a decade studying and working on making things as efficient as possible, i hate this with burning passion, probably more than that poor guys landlord hates him because he's an artist and is probably broke