Very well made! liked the technical part , interesting from start to end, thanks!

Thanks for the review.

That was a really good review. This convinced me that this is the laser cutter I will buy later this year, well done!

Well done, nice review!

Some nice work holding jigs and fixings you’ve made there.

One of the most thorough reviews I've seen for the Max4! Thank you for taking the time to share your 3d print files, I'm printing the alignment pegs as I type this, I'm currently working on a metal enclosure and hope to get the finished product on youtube later next week!

Thank you for your video. I have just bought this machine and I find this video very useful. Just a point about your Flite Foamboard, which it did not cut through... another solution to give you guidelines without the disadvantages of the laser is to use the blade attachment. I have a Silhouette machine, but the opening for it to go through is to narrow. This machine has no such disadvantage. This will not be a cut through, but it may have the potential of being a clean score for you to follow later with a craft knife.

Great video, thanks, I was wondering if you have a file for the printed locating jigs you use?

Love the review! Is there anyone that makes and sells your 3D prints? I'd love to have them, but do not own a 3D printer.

Thanks for the video, Just got my Neje max 4, having a hard time figuring out how to set the module height for focus. Is it done on the laser or is it done with lightburn?

I have a 4 Max along with the NeJe honeycomb bed. How did you attach the honeycomb bed? It is just barely bigger than the rails and keeps falling off the rail. I did like your mods on Thingyverse. Do you use the square post brackets to position the bed? I have a model kit business for 20 years and design my own sailplane designs and designs of others. I am hoping to cut my own parts. I had been using a vendor for many years who tends tone unreliable as of late.

Watch out for PVC too. Poly Vinyl Chloride. Bad for you and lenses to.

Could you make a video about locating material on the laser bed?

nice review, would love to see a test with garolite?

What is the actual laser output watts? So far, the z-axis thing sounds cool if it works with lightburn, but I'm not seeing any cutting advantage over my xtool d1 20-watt? Am I missing something. The original commercial I saw had it cutting through 3/4" wood on a single pass. I'm really confused.

What setting for woods do you aplly? ( z-axis offset)

No manual for the dragchains is because Neje did not give the dragchains to early buyers, and you can not buy them also. Neje leave early buyers in the cold every time. Same probems with the tumbscrews! I took a hacksaw so i can use a screwdriver now. My first time use it cost me 10 cm of honycomb. For me the tension adjuster are useless, because they are only reacheble from the bottom and i have bolted the machine down for regidety. Also the Honeycomb does not fit at all. need selfmade adjusters its a Max3 honeycomb unmodified... MAX4 top end is useles for 9 cm. Nice locater idea and hight adjusters for the z axis ! Tanks for the idea Emergency stop is also useless because you need to reset the machine and the softeware to start again. Easyer and cheaper is to cut the main power with a switch. And no reset needed. I also added a 16K camera and some fire resistend alu tape on the inside of my enclosure and led strip for more light. At first i used the same aquarium pump but that does not give presssure enough, so i run a pneumatic air hose from my shed ( 20 meter) compressor on a wifi outlet. tougheter abbout 20 $ from Ali. There is no possebillety to ad a small led screen to move the laser like this one. Also way cheaper and includes a touchsceen. And 3D possebilleties and wifi. And already seen it work perfectly with a E80, on a selfbuild 15000X22500 machine for almost the same price as the NEJE MAX4. nl.aliexpress.com/item/1005004188679917.html?spm=a2g0o.productlist.main.11.64ef4c28RSMryB&algo_pvid=f8941cf8-4797-4d1f-9e80-5a19cb9f4061&algo_exp_id=f8941cf8-4797-4d1f-9e80-5a19cb9f4061-5&pdp_npi=4%40dis%21EUR%2121.75%2111.64%21%21%2123.29%21%21%402103853f17048258392545237e676a%2112000028610375243%21sea%21NL%210%21AB&curPageLogUid=OSpUY2XYxZzX&utparam-url=scene%3Asearch%7Cquery_from%3A Its almost impossible to implement a touch screen because NEJE made the decision to let the mainborard go with the gantry. Stupid in my eyes. And more sesitive to faults. PS the last 10 minutes is no sound, i had to put up the subtitles.

"come on man" how do you turn those thumb screws with those big sausage fingers?

I live in a small community and do not have access to a 3D printer. Could I purchase the jigs and other 3D items from you? thanks