Рет қаралды 9,452
Fixing your H-Series security camera's connection is pretty simple, but if you're used to terminating network cables, it may look a little scary at first. But don't worry! We made this video to walk you through the whole process.
If you haven't already watched our video on the R-Series process, go ahead and watch that one first:
In one sense, H-Series cameras are easier to fix than R-Series cameras. That's because H-Series does have all eight wires to line up in our RJ45 connector, whereas the R-Series cams only had six.
In another sense, these cameras can still be a bit tricky because they are different colors than you might be used to. However, each wire corresponds to another wire on a standard Ethernet cable, so it's just a matter of lining them up in the correct order, which is...
1. Orange
2. Yellow
3. Green
4. Purple
5. Gray
6. Blue
7. Brown
8. White
Check out the links below to pick up the tools you need for this project! Don't forget to tune in next week to see this same process on a Uniview camera.
***********************************
🔗 Product Links
RJ45 Pass-Through Connectors: bit.ly/rj45-connectors
RJ45 Crimp Tool: bit.ly/3cFC2Fh
Ethernet Couplers: bit.ly/339U0g1
🎞️ Additional Videos
How to Crimp an Ethernet Cable: • How to Make Your Own N...
***********************************
Sign up for our newsletter! www.nellyssecurity.com/subscribe
🌐 www.nellyssecurity.com
📧 customerservice@nellyssecurity.com
📞 855.340.9999
⬇️ Follow Us on Social Media ⬇️
Facebook: / nellyssecurity
LinkedIn: / nellyssecurity
Instagram: / nellys_security
Twitter: / nellyssecurity