How To Fix Your IP Security Camera's Damaged Ethernet Connection (R-Series)

Рет қаралды 64,888

Күн бұрын

Got a damaged RJ45 Ethernet connection on your IP security camera? That's the worst. Here's a quick fix that just may be able to save your camera.
A damaged RJ45 connection on your security camera not only stops your camera from working, but it also voids your warranty. But before you throw away your camera, try out this hack. Quick disclaimer: depending on the type and amount of damage, this fix may or may not work for you. But if the damage is confined only to the connection, this should be able to get your camera back up and running.
The process is simple. Cut off the damaged connection. Crimp an RJ45 Ethernet connection onto your camera's pigtail. Using an Ethernet coupler, reconnect your camera to your network.
It's easier said than done, and it can be a bit tricky. But with a little practice, you should be able to get your damaged camera working again.
This video demonstrates how to fix your R-Series connection. Depending on your camera, the order and colors of your wires may be different. If you don't have R-Series, click here to check out our blog post to help you figure out your camera: https:nellyssecurity.com/rj45-fix
We're interested in hearing what hacks you've come up with! Let us know in the comments below how you've saved your cameras in the past. It just may help someone else!
***********************************
🔗 Product Links
RJ45 Pass-Through Connectors: bit.ly/rj45-connectors
RJ45 Crimp Tool: bit.ly/3cFC2Fh
Ethernet Couplers: bit.ly/339U0g1
🎞️ Additional Videos
How to Crimp an Ethernet Cable: • How to Make Your Own N...
***********************************
Sign up for our newsletter! www.nellyssecurity.com/subscribe
🌐 www.nellyssecurity.com
📧 customerservice@nellyssecurity.com
📞 855.340.9999
⬇️ Follow Us on Social Media ⬇️
Facebook: / nellyssecurity
LinkedIn: / nellyssecurity
Instagram: / nellys_security
Twitter: / nellyssecurity

Пікірлер: 55

@kylenathe2807 2 жыл бұрын

Just did it, thanks for the video guide!

@mikejayneteddyadventures9012 3 жыл бұрын

brilliant video thanks

@jamesdetter2088 3 жыл бұрын

Thanks for doing this video. Need to do this to one of my cameras

@NellysSecurity 3 жыл бұрын

Awesome, hope it helps!

@saleemsadique 2 жыл бұрын

THANK YOU SHARING BROTHER

@bahrhijab2161 3 жыл бұрын

Thanks great job

@gary-gilbert 3 жыл бұрын

use a scrap piece of wire in the connector spots that are suppose to be left empty to help line the wire pins up. also if a solid wire you may consider a keystone puncheon jack instead of using a coupler.

@guney5859 3 жыл бұрын

I got also waterdamage, my cam is an unbranded one has 6 pin colors of an cat5e rj45, its missing only blue pins, does someone know what color sequence i have to use for the rj45 plug.

@Andre8521 Ай бұрын

I can’t seem to figure out what’s the “blog post link “ in the description so I can find the Uniview Pinot

@prasathram3685 2 жыл бұрын

thank you 😊.

@AndresCruz-nv3fp 3 ай бұрын

Hi Mate, your explanation was awesome, even do, my camera is a Swann brand some of the wire colour code was different, but by elimination I managed to match the wires, From Australia, Thanks bro you just save me a camera, now is working 100 percent.

@josenavarro988 Ай бұрын

I need help to fix my H series lorex camera. on the video doesn’t show the same colors My Lorex has orange and orange stripe green and green stripe the next four colors are solid, colors black red blue brown

@jasonbodenheimer4017 Ай бұрын

I can confirm that this wiring works for at least 2 different Sunba PTZ cameras as well

@kakesuofficial 7 ай бұрын

im using a senda ip camera 360 and when dec 1 2023 came in to the calendar the camera went out still on the network but cant open it and it says camera not online even though it has power and network is working fine i connect it with wire since i messed up with its wifi antena i broke it but before this before i broke its antena same issue occurs with wifi can you help me with this one? thanks

@DhanyaAsya 4 ай бұрын

do you have a viseo about changing a new cable of a DS- 2CD2347G2 camara ? thank you for your responce

@williamnedden1965 Жыл бұрын

DIFFERENT COLORS Just completed my best try at repair and the camera works. In my ANNKE Model 151DJ, the wires were all solid colors and to FIND the sequence at the connection which was totally blitzed. I found nothing online with these colors shown. I had to dissect the core. I used your spacing and physical sequence in the old plug in this order: Orange Yellow Green (Grey) Purple Blue Brown (White) I cut short the Grey and the White before inserting in RJ45.

@shivmahabir9983 3 жыл бұрын

Out of curiosity, why didn't you use a cat5e or cat6 module. And to weather proof it use a small price of heat shrink. As well as some of those wires may be stranded. If that's the case soldering the wire carefully then punching it into a module may be easier.

@nicolecox8691 2 жыл бұрын

I have a Jennov camera with pins of yellow, Gray, Green, White, Purple, Blue , Blue & White and Black can someone help with the matching pinout for rj45 keystone jack.

@rob3521able 5 ай бұрын

Can You help with dc wire extension to camera by 30meters cable why signal is not wroking. 9V 0.6A orginal charger. How to fix issue properly?

@neilmerrick5266 Жыл бұрын

Hey good day just a quick question.. I love your explanation in your video but I'm wondering can't I cut the wires and on the poe camera and use my older dvr instead of my nvr system??? I have so many poe camera but I don't have the standard camera

@NellysSecurity Жыл бұрын

Hey Neil, I would advise finding out the manufacturer of the specific camera. Then they should be able to provide the proper pinout for you.

@privatecaller1466 2 жыл бұрын

Hi there, i have swann audio camera, water damage, what series do i perform on the wire? TIA

@NellysSecurity 2 жыл бұрын

Hello, i would reach out to Swann to get the proper pinout for that camera. Unfortunately we do not carry Swann or have that info on hand.

@jd415 3 жыл бұрын

What happened to the original video, why was it taken down?

@NellysSecurity 3 жыл бұрын

Our H-Series diagram was incorrect, so we cut that section out. We'll do a follow-up video with the correct H-Series and Uniview diagrams!

@thomhill2054 2 жыл бұрын

I’ve also used a RJ45 keystone and punched down the wires opposed to using the RJ45 make clip.

@ojammeh 2 жыл бұрын

Hello my dahua ip camera cable does not have the same color as yours and so I could not follow. Mine has whieBlue/blue, whiteOrange/orange, Blue, Brown. In this case I am confused as I don't have a voltage tester. Can you pls assist and guide me through

@NellysSecurity 2 жыл бұрын

Unfortunately we do not carry Dahua. Im sure a quick google search can get you the info! I know there is "dahuawiki.com" that has great resources

@adriansealy9479 2 жыл бұрын

Is it possible to inform me which wires to use on oossxx poe camera using keystone plug ??????????????????

@NellysSecurity 2 жыл бұрын

Unfortunately we do not carry oossxx products so we do not have a pinout for that. Id advise reaching out to oossxx.

@computerplus2 Жыл бұрын

is there diagram of cable cut dahua DH-ipc-hd8w2300rp-Z model with color coding, this coding did not match

@NellysSecurity Жыл бұрын

That looks like a Dahua model, which we do not have information on currently. I would reach out to Dahua directly, or even a google search may get you your answer! Just be sure you get the proper pinout for your specific model.

@nicolecox8691 Жыл бұрын

I have a Jennov camera I am trying to find the pinout the color of the cables are Black, purple, yellow, blue, blue & white, green and gray can you help

@NellysSecurity Жыл бұрын

Unfortunately we have never carried that brand of camera to know what the pinout is. I would recommend reaching out to that manufacturer for this information!

@UpDynamic Ай бұрын

Oh cielos los mismo colores que tengo yo, por eso he llegado aquí.

@geniusbboy Жыл бұрын

thanks, mine after completing the convection it work only with 12 volts direct current ,why?

@NellysSecurity Жыл бұрын

What model of camera are you using? Was the original connector badly damaged? Its possible the pins could have been shorted out inside the camera as well, causing it to not support POE anymore. Or you can try redo'ing the connector replacement.

@geniusbboy Жыл бұрын

@@NellysSecurity thanks, no only one pin was damaged, this happened after connector replacement , could it be from the camera? how to find out ,?

@lily_is_awsome8453 Жыл бұрын

I have an acesse IP camera, it has 5 single stand wires in a color scheme I can't find on the internet. Black, blue. Purple, green and green/white. It's powered by separate power cord. Unsure how to wire into new female connector

@NellysSecurity Жыл бұрын

Unfortunately we do not have information on that brand. We would advise reaching out to the manufacturer to see if they can provide that info for you!

@jackparsons2257 3 жыл бұрын

What is the model of this camera?

@NellysSecurity 3 жыл бұрын

This cameras was one of the R-series Turret. Any one of these models m2t, m5t or m8t

@pandyg942 3 жыл бұрын

Bro can you please make a similar video with UNINIEW camera.

@NellysSecurity 3 жыл бұрын

Stay tuned 😎

@herrlip72 Жыл бұрын

Anyone got the colour sequence for an Anneke C800 4K ?

@NellysSecurity Жыл бұрын

We do not, have you tried reaching out to Annke?

@francolovo 2 жыл бұрын

Hi I have the same issue with my camera but my problem is that the colors are different I don’t know the order White Green Purple Blue White and green White and blue Can u help me please

@NellysSecurity 2 жыл бұрын

Hey Fracno, id advise reaching out to the manufacturer of your camera to get the proper RJ45 pinout!

@vitryludovic7856 Жыл бұрын

Hello i have the samedi color , have you got thé shema?