Imagine! 1200 HP 260 CI TT LS Full Throttle/Full Load 5 Min Dynos! NRE's Tom Nelson explains.

Рет қаралды 276,180

5 жыл бұрын

Have you ever seen a 1200 HP 260 ci LS engine full throttle and full load run for 5 minutes? I think not! Would you repeat again for a total of 12 Runs? Well that's what Tom's customer required of his new design of boat engines! This is a totally new engine design for NRE. A future video will describe this engine's unique build. Stay tuned to the NRE channel.
Want to see the full 5 minute pull? Click on link below:
eur02.safelinks.protection.ou...
This is NRE TV episode 279. Thanks for watching! Subscribe!
Nelson Racing Engines uploads new videos every other Friday at about 11 AM PT.
To subscribe to the NelsonRacingEngines channel click / @nelsonracingengines
To follow Nelson Racing Engines Engines on facebook click:
http:/ NelsonRacingEngines
To follow Nelson Racing Engines on Google Plus click:
plus.google.com/1113792767278...
To find out more about Nelson Racing Engines click NelsonRacingEngines.com.
To bring your product or service to the World click VeritasMovieStudio.com. Veritas Movie Studio is a media production company.

Пікірлер: 733

@wheeln24-79 5 жыл бұрын

This should be the engine builder challenge. Can your 1000 hp engine run wide open for 5 minutes.

@dougcohen3364 5 жыл бұрын

Likely 800hp at wot. Said the scramble button was to pass people

@nicklashway6636 5 жыл бұрын

The gauge towards the end of the run said 764hp when he was holding 7k rpm. So this was most likely on the lowest setting

@msanchez7317 5 жыл бұрын

@Steven Ross-watt Agreed. A 5-min wide open test is kind of useless for most racing (except apparently boat racing, which makes sense). I would not be surprised if IMSA racecar engines would fail this test, and they are some of the more reliable race engines (because of the duration of IMSA races I reckon).

@ray_collins 5 жыл бұрын

There's a lot of endurance engine builders that dyno at those levels for hours. If you're doing stuff like Baja, NASCAR, or Offshore Endurance, you really will be running WOT for minutes (or hours) at a time, for a whole day, and then again the next week. Then again, those engines are way bigger than 260ci.

@hendrahendra 5 жыл бұрын

EJ owners: hold my bearings.

@jasonbeaulieu4979 5 жыл бұрын

I’ll bet the race rules change after this season

@Rollin8.0 5 жыл бұрын

The trick is to pace yourself and win the season, but only by a little bit! If you go out and win your first race by a huge margin you're gunna have a bad time with the rule book.

@TheMattc999 5 жыл бұрын

jason beaulieu that's exactly what I thought.

@fattsthebavarian6104 5 жыл бұрын

I thought that as soon as Nelson said that there was a "small clause" if you're under 260 inches. That clause will magically disappear...maybe before next season

@muskyelondragon 5 жыл бұрын

Yep

@juanvaldez6321 5 жыл бұрын

Ya but this season he will be king

@earlbergener 5 жыл бұрын

Made an old motor builder get chills SUBSCRIBED

@tjohnson9051 5 жыл бұрын

Seeing all the other engines combinations you have built I was confident this one would pass the five minute test. Boat engines take a beating especially in rough water where the prop loads and unloads when the boat grabs air. I think the boat this engine will go in will be a force to recon with. Nice work!

@ChuckBeefOG 5 жыл бұрын

Not only that, boat V8’s typically spend most of their life above 3500rpm. Where as your truck cruises along at 1500rpm for most of its life.

@AndieBlack13 5 жыл бұрын

Turbos in those jet-boats don't really work that well, it might be that all-or-nothing peaky power delivery...something...the jets typically work better with the positive displacement superchargers.

@mightyfinejonboy 5 жыл бұрын

Ahhh water cooled headers explains the lack of glow :-)

@DrFoo11 5 жыл бұрын

Yeah! I don't know squat about boats, and was wondering about that.

@waynebollentin989 5 жыл бұрын

What do you mean water cooled headers?

@ericb065 5 жыл бұрын

@@waynebollentin989 Literally the headers have water jackets in them. Make up for the lack of air flow inside the hull where the engines are usually stuffed.

@waynebollentin989 5 жыл бұрын

@@ericb065 what part of the video do you see water jackets in those headers. The reason water cooled headers are used on some boats is for noise mostly and where heat is a problem like on a normal inboard motor setup. The header coming of the motor needs to be hot to spin the turbine within the turbo. I do not see anything on the heaters coming from the head on the motor to the turbo. Please time mark where you see these water jackets. Thanks

@scooter0241 5 жыл бұрын

Didnt know there was such a thing ha

@goaway4702 5 жыл бұрын

Nre doesn’t make stuff to make money. They make stuff to be the best. That is some ingenuity.

@Drivewaybuilt 5 жыл бұрын

and then triples the cost for good measure

@goaway4702 5 жыл бұрын

Ingenuity costs money

@lovescamaros1 5 жыл бұрын

@@Drivewaybuilt cheap, fast and reliable now pick two because you can't have all 3. I know nre builds very reliable engines and you get what you pay for.

@Drivewaybuilt 5 жыл бұрын

@@lovescamaros1 You can definitely have all three but the real question would then be how fast, how cheap and how reliable? for 30k that damn thing had better go 200 miles/hr for 150,000 miles and make me a freaking coffee --- although, if I hit the lotto I'd call NRE the next day and place an order

@scottwalsh6999 5 жыл бұрын

Bet that was the longest 5 minutes of your life!

@paulcopeland9035 5 жыл бұрын

They did 12 pulls.

@WarpedPerception 5 жыл бұрын

The bouncing off the rev limiter makes me nervous!!!!.

@allblowdup 3 жыл бұрын

It was just surging on the dyno not the rev limiter. I have my own thoughts on why.

@km6832 3 жыл бұрын

That is to similate how the engine would be ran in the boat, they go WOT from green and it just limiter bounce or just below so him doing that ensures that nothing lets go when it is actually in the water

@smiley19912 11 ай бұрын

Just sounds like a little waste gate surge

@hotrod2893 5 жыл бұрын

I have watched hundreds if not thousands of dyno pulls...this one is truly impressive.

@Cronus_1 5 жыл бұрын

I've been watching your Dyno pulls for quite some time, but this may be the coolest thing I've ever seen.

@alexandernerito 5 жыл бұрын

The quality of the video is insane and so is that engine setup

@Rajonas007 5 жыл бұрын

By insane you mean insanely shit. FFS people.

@joonaslaakkonen8096 5 жыл бұрын

@@Rajonas007 how is it shit

@donmathias1705 4 жыл бұрын

Has to be the best dyno video I've ever seen. A true torture test for an amazing engine.

@soulsurfer8797 5 жыл бұрын

Form meets perfection. True model of what perfecting your craft means. Congrats Brother on the build.

@rvdeddrift 5 жыл бұрын

The most audibly pleasing video ever created... Hands down! More of this gnarpull footage!

@nadronnocojr 5 жыл бұрын

Some people dream of lottery winnings funding, college for kids, house for relatives , helping out the poor, I dream about sneaking one of Nelson’s engines in My Dakota, and taking all my car buds out for a sunrise. I have liked your channel since the beginning and to see you still pushing the envelope , with technology and a smile to boot,m release more videos man , you have an audience ... keep the faith 😀

@bicylindrico 5 жыл бұрын

Been watching Nelson for so long he is starting to look like an old man like myself

@SAVikingSA 5 жыл бұрын

dude I had the same thought lol

@hammeredhemi1223 5 жыл бұрын

Wow..... "there was suppose to be a loud KAboom" Hell no it's an NRE engine. Great Job and Well done.

@TomsTurboGarage 5 жыл бұрын

Incredible video and excellent work!

@Q_IXIX 2 жыл бұрын

I think u mean incredible work and excellent video lol

@MrLj29128 5 жыл бұрын

1) I love the new video quality 2) been a fan of your work for years 3) your craftsmanship and knowledge is on point 4) I cant wait for you to build my dream car again!

@danielbates4137 5 жыл бұрын

NRE for the win! Most underrated engines by far. This dude builds some badass engines I'd give a nut and a kidney to have one built for my project

@PatRMG 5 жыл бұрын

I've always been impressed with this channel.

@YoungsCustom 2 жыл бұрын

Most insane thing I've ever listened to or watched! Well done

@joesmo4919 5 жыл бұрын

WOW!!!!..Iam IMPRESSED!!!!😁😎 that sounds like a screamer!!!!! Nice work Tom thanks for sharing!!👍👍👍

@lucasblanchard47 5 жыл бұрын

That’s an insanely COOL engine setup! Pun intended! Amazing to see that the turbo housing is hot enough to ignite paper on contact, but those trick headers right before the turbo is cool to the touch!!! 👏🏻 well done sir!

@Azcampingandexploring 5 жыл бұрын

Absolutely amazing. Coolest videos I've watched in a while. Great job.

@jamiechap7969 5 жыл бұрын

This is a true full send. Love it. 💯

@1216jimmyz 5 жыл бұрын

Pure insanity as usual...I love it!!!

@EDWARDTREVEY 5 жыл бұрын

That is a testament of how good you are , right there. Wow friggin amazing and just watching from here was nerve wracking

@linderpowersystems2219 5 жыл бұрын

Thanks for the mention Tom!!!

@mikecarlson3984 5 жыл бұрын

I could listen to this guy talk all day!👍

@ChevyIILS 5 жыл бұрын

That is absolutely incredible. I would love to pump my LS3 up a fraction of this to see what it would be like. Awesome video!

@ThomasDuffyRE 2 жыл бұрын

Wow thats impressive and sounded amazing. It even sounded like an engine in the boat with the RPM's jumping like it does when the boat is skipping along.

@patrickmcdowell1743 4 жыл бұрын

awesome work NRE people who know how ta build an engine.

@BEAMERNOOB 5 жыл бұрын

I was just thinking the other day when you were gonna post a new video then you upload this gem. Thank you! That was music to my ears. I’d like to watch/listen to an uncut version of the engine just revving out on the dyno flat out

@captaincouldverc 3 жыл бұрын

Man I really would love to see an update on this engine. I know alot of things have been put on hold recently, but I'd like to hold faith, this guy was finishing up regardless of lockdowns

@robertm2172 2 жыл бұрын

Love the plywood scatter protection. Also love the run we run are boats almost pinned all day

@thatLongBeachguy 5 жыл бұрын

That had me on the edge of my seat, bravo fellas!

@elonmust7470 5 жыл бұрын

I'm glad to see content

@Backyardmech1 5 жыл бұрын

Damn that engine was banging that rev limiter! Cool to see an engine of that size make that much power and live on like nothing happened. A true bullet proof build.

@caseywilliams4322 5 жыл бұрын

It wasn't the Rev limiter it was the Dyno braking the motor to achieve a prescribed rpm

@jdreaper2176 5 жыл бұрын

That engine sounds sick. Nelson is the man !!!

@josephbibelhauser4240 5 жыл бұрын

That was badass and legit... awesome build sir!

@donkeyteeth5192 5 жыл бұрын

WOW! Kick-Ass! I think I just found the new way to light my bong man! You Rock..as usual!

@donkeyteeth5192 5 жыл бұрын

Another genius idea...Need to start NRE Shop Tours as ND start doing this shit!

@Elchapo62 4 жыл бұрын

great work, lots of engines can flash big HP numbers but this one is for real and usable !

@topfuelsuzi 5 жыл бұрын

Awesome. You could hear it settle down and get into a rhythm. Great stuff indeed.

@extinguisher_ek9556 5 жыл бұрын

I'd say one of the best engine builders on the planet!

@BuildTuneRace 5 жыл бұрын

So sick! Killer job!

@vulcan-900bobber7 5 жыл бұрын

I would love to be in that boat screening up a river flat out, sounds awesome 😊

@kgraves69 5 жыл бұрын

Good job guys, that thing is a work of art 🤘

@DrFoo11 5 жыл бұрын

I've never seen anything like it! That was awesome!

@ldtenenoff 5 жыл бұрын

so is that about the same cubic inches as 4.3 liter v-6 in my s-10? holy shit once again u prove u r the man tom wow love the sound what a thing of beauty. i think my first v-8 was a 265 in one of my 57 chevy unbelievable WTF i am smiling

@lorriecarrel9962 3 жыл бұрын

That deserves double thumbs up,sweet music

@jonbrockman5308 4 жыл бұрын

You build a QUALITY product for FACT. Awesome to see this video as I know engines fairly well too. DAMN!!😁🤘

@PapaWheelie1 5 жыл бұрын

It has been over a year since I have watched a video from these guys and I still don’t have an NRE V8 for my Porsche 914. But I fixed that - clicked subscribe to see videos more often lol

@terranceroybal3222 4 жыл бұрын

The best way to test a motor with proper precautions, who said walls don't work when you may have a catastrophic event during a massive dyno run in case parts start flying all over. Now thats when know that your motor is absolutely fantastic. Great work!

@Club86 5 жыл бұрын

Production value gone through the roof. Sick.

@RustyRench 5 ай бұрын

I remember watching his stuff like 10+ years ago it was insane then and only got better!

@cwarner218 4 жыл бұрын

Great video ! Awesome motor and power

@Anthony-du3he 5 жыл бұрын

Absolutely amazing. Beautiful machine built like Picasso paintings

@sxyangeleyez 2 жыл бұрын

That is F$$king insane!!!!! I caught the title and knew it had to be you!

@Whthomas69 5 жыл бұрын

badass as always.. dude your are living the dream !

@ChuckBeefOG 5 жыл бұрын

Engines like damn you, i want to rev beyond this stupid limiter! Nice work NRE as usual.

@geminioutdoorz 5 жыл бұрын

Get it man best engine builders out there!!!

@boltonky 5 жыл бұрын

You and your team have it down pat, and make some amazing designs and power

@Chuffin_ell 5 жыл бұрын

Love the sound of a high revving de-stroker...

@Rajonas007 5 жыл бұрын

7.5k rpm is a disappointment in comparison to 20k rpm kzfaq.info/get/bejne/kLV6ns9lps3KZJc.html

@Chuffin_ell 5 жыл бұрын

GEO000 Nelson is a damn good builder, but to be fair...I wonder how much his engine will cost versus a factory Honda F1?

@circuitdude5924 5 жыл бұрын

@@Rajonas007 Rpm means very little, deisel engines rev extremely low and make a TON more torque and are capable of creating a lot more power with less cylinders. Some modified Cummins (6 cylinders) make nearly 4000 lb ft of torque with 1500+ horsepower.

@Jesse_Caulk 5 жыл бұрын

@@Rajonas007 well yeah, but that Honda engine was something like 2 liter and 10 cylinders. Bit of a different design, no? Besides, rpm was not the goal here. There's 10k LS based builds out there.

@circuitdude5924 5 жыл бұрын

@@Chuffin_ell There's also a v18 cylinder Cummins train engine which makes 178,000 lb ft of torque which only revs to 1500 rpm.

@jamesvaughn4747 5 жыл бұрын

Sweet video y'all have the best of the best

@FixItStupid 3 жыл бұрын

Good Work Tom

@johnthomas460 5 жыл бұрын

Impressive stuff!!!

@oneguysgarage5107 5 жыл бұрын

That was incredible. You guys build good shit. Been a fan since you guys built the F-Bomb for Freiburger.

@mrss8979 5 жыл бұрын

A true test of the builder 🙌🏿👏🏿🙌🏿👏🏿🙌🏿👏🏿🙌🏿👏🏿

@MrHuntertaylor 5 жыл бұрын

Damnit I am inspired by everything you do!

@bcbloc02 5 жыл бұрын

Nice! I love a good long hold the power dyno pull.

@carlsenden8750 5 жыл бұрын

Well done, man👍👍😎

@bowtie-man 5 жыл бұрын

I hear ya boys thanks for the eargasm.👍👍✌✌

@timtaylor6147 5 жыл бұрын

NICE hey Tom, the twin 72s you sold me are goin on a destroked 6.0 so this video got me up and motivated. the truck is my daily so I haven't been able to install the kit I built but all the details are workrd out I'll send you the pics like I promised

@tomtucker8849 3 жыл бұрын

Great engine build.

@jimmccabe801 5 жыл бұрын

That had to be crazy nerve racking. Damn.

@cgray5559 5 жыл бұрын

That was I think around 2004 when me and my best friend ran across a video of a crazy blue rx7 with a twin turbo 426 I think. I've been a fan of NRE since that day.

@myfagan 5 жыл бұрын

This is a true test of a builders ability with an engine. I would imagine heat dissipation had alot to do with getting this done

@1-Six-dee 5 жыл бұрын

That is insane those headers staying cool is crazy

@fredflinstone5315 5 жыл бұрын

Good job !! This is how to push it to its limits, It held up , now if you could do a video of complete tear down and show the world what the inside looks like after that never ending pull. This would be interesting. Cheers Nelson racing!

@chakadog100 5 жыл бұрын

Water cooled headers ftw!!! I was wondering why they weren't glowing red after the first 10 seconds let alone 5 min. That's awesome!!! Beautiful machine!!!

@ProjectCarTV 4 жыл бұрын

I hadn't realized you've begun using your own branded Turbochargers. Nice! #NelsonRacingEngines

@100pyatt 5 жыл бұрын

LS power for the Win !!! That's a REAL engineered build !!

@TheTektronik 5 жыл бұрын

Whoever your editor is he did a great job.

@MitchTube 5 жыл бұрын

That is one sweet sounding motor

@robtaylor6806 6 ай бұрын

I remember I first time I saw a Nelson engine. It was a 632 like 15-16 years ago. Been a huge fan ever since. I build high hp drag motors and Diesel engines but I’d love to build shit that crazy.

@overzealousmaverik 5 жыл бұрын

That was awesome and kind of nerve racking.

@funkmasterblaster5921 5 жыл бұрын

I can't believe how much my heart rate increased by just watching this...can't imagine driving the vehicle it's going into...my goodness..

@estelja 4 жыл бұрын

Can you imagine having a job where you get to laugh in amazement at your own work on a regular basis? So cool!

@prostreethustler239 5 жыл бұрын

I can only wish I could have a Tom Nelson engine Combo. wow nice job

@deanrobert8674 5 жыл бұрын

Your not the only 1

@LandonRoy-cv9rt 5 жыл бұрын

Finally a new video

@gino27224 5 жыл бұрын

Wow quit surprising. I was expecting it to blow any minute. It sounded like that. That's a good engine.

@dwaynejackman3885 4 жыл бұрын

Whoooos the man with the plan....NRE

@mikerhoads7010 5 жыл бұрын

That’s awesome the true fact of a dyno is to put it to the limit!! Hate the flash high horsepower dyno pulls bullshit you put it on there to see if it breaks!! Awesome videos and knowledge thank you 🙏

@THOMAS01ify 5 жыл бұрын

That was the sketchyiest most awesome demonstration of a engine builder I've ever seen I dont think anyone else has ever done that . No one except mabe banks he is crazy as hell just to try it.

@dwphillips42 5 жыл бұрын

that is an excellent built engine. 👍 you talk about leaning on it hard....WOW!

@blackdragon46819 5 жыл бұрын

That is insane!!!

@rooster7658 3 жыл бұрын

That was awesome

@big_mike_nyc 5 жыл бұрын

Absolutely fucking INCREDIBLE the hair on my arms stood up when the motor started pulsating then it smoothed out like silk!!! That motor LOVED 7000 rpms!

@doublejmotorwerks 5 жыл бұрын

1:31 Radical clamps and a great guy that makes them. I love all your videos and have been watching since the RX7. Hopefully you will consider playing with VW engines one day. Lol Maybe.