I've spent the last 3 days trying to figure out this controller this video answered all my questions and now it's up and running perfectly thank you very much

Bought one last Fall, installed it today (June 15th) Thank you for your video as my display panel is the newer version and the booklet is horrible, your video is awesome, was nice to see there was no sequence to pump the fuel as another video was showing with a different display, that was my problem I couldn't figure out how to pump the fuel, finally I just pressed the ON and after awhile the pump started as in your video and the unit worked perfectly. Now I will be able to set up my remote thanks to you. Merci Norm !

Thank You for making this video. Very clear instructions. Mine fired up the first time after watching the video. I plan on making use of some of the heat that radiates from the exhaust pipe as well as what comes from the unit itself.

After 3 weeks of pressing buttons in all kinds of configurations, I'd just figured out 1/2 of what you showed here My big problem was the pairing of the remote. After following your instructions several times, it suddenly decided to enter into menu mode and I could pair it. Nonetheless, I am really happy with my "8kw" (5kw in the real world). Specially the simplicity of it's working and the serviceability of it when we want to maintain or repair it. This week I'm ordering a set of kits and parts so that come spring, on a warm spring afternoon, I'll open her up, and clean everything ready for next fall.

Thanks for the instructions on pairing the unit to the remote. I played for weeks trying the instruction book and other's video instructions to no avail. Yours was correct for this unit controller. Another thing that I had to figure was the pump priming function. No one has covered it yet, however I found that in standby mode, you can press and hold the two arrow keys for the length needed for the priming function. Once you release the buttons, it pulses an additional second or so then stops. Hope that can help others with this newer 2022 blue controller.

Thanks for making this video. It's very informative, especially as I am about to buy one!👍

Very informative Norm, well presented, first time one of these gauges has made any sense to me. Thanks for sharing 😃👍

You're a lifesaver thanks. I could not figure those directions out to save my life.

Champion! Just used this video to learn my newly installed heater. Thank you!

Cheers from New Zealand. Got remote all sorted and working great.

Thanks, man! You saved me from returning the heater as defective - couldn't figure out how to pair the remote, and every other video was pointing me in the wrong direction.

I want to thank you so much for this video, I have talk to VEVOR who has basically given me this heater, because they could not tell me how to make the remote work, and it would cost too much to return it. And now I have Marianne the remote up here and it’s working perfect. Thank you so much for your help.

Merci Norm. received mine yesterday with no instructions for this controller. your video was very helpful.

Thank you so much for making this video. I understand the controller I have now and how it works thanks to you.

Thank you for video, just got mine straight from vevor $ 125 us can't wait to fire up

Hey thank you. Your video is the only one that was correct to pair my remote. Been looking for days to figure it out. I guess theirs more then one design blue controller

Great. Thanks. Answered all my questions. I have 8 levels of heat. But a cheaper remote without screen. Seems to do the trick though. Thanks again.

I just bought one of these heaters. I decided to improve it inside and replaced fuel lines, added a fuel filter. Thanks for explaining the functions on the device. Very helpful. Dean 🇬🇧

Nice explanation... Thanks! One comment on your setup is that the air intake for the combustion should really be routed outside too, as this keeps any risk of fumes from the combustion side of the heater from being blown back into your garage. Also as someone else mentioned, the (alleged) silencer has a drain hole in it for condensation, so should also be outside the building as that will be leaking some fumes into your garage too.

Thanks so much for this. Could figure out the remote pairing until I saw this. Cheers

If you need to relocate the controller, you can cut and splice the cable. I used 16 gauge and some butt splices. Choose the thicker gauge than the original wire to compensate for voltage drop. Wasn't sure if the distance was going to cause big enough voltage drop to cause an issue but the price of the cable is very similar. So why not? You can get black, red, and blue from a hardware store. I just used black and labeled them so I didn't get my wires crossed. No issues.

Merci Norm! 👍 I got one as well. Very well explained.

Thanks alot , best explanation of this heater and the controls

Thanks for the video, I just unboxed mine this afternoon and kept trying button combinations but didn't have any idea what did what. Somehow managed to pair the remote, but didn't know what the mountain icon meant or how to run the timers, or anything about auto or manual modes. Wish I'd have found your video sooner!

Thank you for showing this information. was not able to program the remote or figure out the controls for this new controller ..its identical to older model but it's different software

To prime the pump hold both arrow buttons down. When you let go it will stop priming. Also, for anyone curious, the timer can be set and engaged in the on and off modes. If you engage it when it’s in the on mode, the off timer will engage. And vice versa. You cannot get it to say, turn off and then turn back on without touching it. It will only do the one timer action before you have to turn the timer function back on to get it to do another.

Forget that I’ve done it. Thanks so much for your help

Thank you. I went to other videos that told me crap. This was great.

Thank you so much🤗VERRY GOOD INFO⭐️✨👍🏻

Thanks for the video, couldn't find the newer control panel on any other sites. Very well done sir.

Thank you good sir this helped me out a lot

You’re a legend sir 👍🏽👋🏽

thanks for the info seems like a good heater

Mine self regulates on H6 around 210 C. It modulates the pump as to not exceed that temp. 10 -20 % used oil.

Was hoping this particular controller could display hertz and/or rpm, rather than '1,2,3' etc. Anyway, many thanks for putting this vid out.

Good video, I just have a few observations about your exhaust. Your going to want to make sure that it's at a constant downwards slope to avoid building condensation. More importantly, you want to make sure your muffler is outside of the space your heating. It has a small pin hole at the bottom for condensation/ waste fuel can escape from and it will emit just a tiny bit of exhaust. In a big space such as yours it would take a long time to build up enough c02 to be harmful, but last year a ice fisher died in his shack overnight due to having the muffler on the inside to put it in perspective....

Thanks for the video , I’ve just recently purchased a 2 kw unit with a controller same as yours .. thanks for the tip .. especially how to switch it to a temp chasing unit rather than been on a manual mode 👍 Can you tell me ( video) though how to go into the fine tuning settings Cheers thanks 👍

Great video

Great video thank you

Thanks a bunch!!

Hey there how are ya? I’m gonna get one of those heaters for my garage. I hope to do the dual tank set like you as I have lots of filtered oil ( black diesel).

Thanks but would love to know how to change the temperature from C to F thanks

Is there a way to get the thermostat and controls away from the heater?? I need the thermostat and controls inside my camper…but the portable unit running outside. Any ideas??

Great video thanks

Yes enjoyed it, very interesting and thank you for taking the time to make and post this video. I was getting nowhere fast ..... the instructions are so dire!!

Thank you sir! you have the same controller/remote as I do. I had 3 questions and you answered 2 of them. I can use the OK button to cycle from SG# mode to thermostat mode, but once in Thermostat mode, how do I adjust the setpoint temp? Any help is appreciated!

There's other videos that explain the older blue controller which looks identical to this one. Mine doesn't have the red circle, and the manual mode and timers are completely different than this, Also, these new ones are not compatible with the afterburner wifi control add-on.

Thank you for this, but I am still trying to get to the fine tuning settings on this version. I'm just trying to adjust the pump speed so it's not guzzling fuel.

It’s so wild how complicated this is. I think I’m terms of User interface usability, I’d prefer an entire keypad with many buttons, instead of the press-and-hold 2 buttons simultaneously. You almost need a masters degree for this, and I can’t just attribute that to the language barrier between Chinese and English either. Woosh, thanks for explaining it and sharing! I’ve spent 25 years as a software engineer, almost exclusively on User interfaces (“front end”) and I’m not a “user experience” expert, but this would be such an excellent interview challenge for UX designers. A gold mine, really. How would you design it better? What would you take away? What buttons would you add? Apple would do it nicely I’m sure. Steve Jobs, we need ya man!

Great video! My first day using it, I ran it for 10 hours, no problems. I never smelt anything till the shut down. This is a lot of bang for the buck. See how long it lasts?

Hi there, Thanks for your video, it’s helped me get to grips with setting the timer. Can you tell me how to choose between manual and auto when it starts up on the timer. Thank you ☺️ EDIT Also, after many attempts of going through the timer setting process, I find I have to press ok after setting the first timer for switching on, otherwise it reverts back to the previous time I had set. The biggest problem I’m finding though, is that the heater isn’t turning off using the second timer. When I go out to my garage, the timer is no longer showing and the heater is still running. The only time it shuts off with the timer, is if I set the timer while it’s running!

just bought the 3kw unit can you change from c temp to f temp

Helpful video on the controller, since the directions in the box are useless. 👍

I have the same display and remote. Put it into OC1, press up arrow on the remote and never leaves “waiting”. Maybe I have a defective remote.

How do you pair the black remote?

Hi everyone. I get a code that the fuel pump is not working. A completely new unit. Is it possible that the wires are mixed up + - or does it not matter for this pump?

merci beaucoup pour les explication

i have a very strange lcd controller on my 5kw heater ,it shows a flame icon ,when the burn chamber lights ,and the flame icon is where normaly the heat bars are ,and below the heater picture ,i have 8 flat bars across the bottom of lcd controller screen .so it has 8 heat settings .i,ve not seen another one like it .

Hey where i Come to the Menü wehre i can set the pump settings

On my controler I see 00.1, 00.2 etc etc are those not just in actual minutes? You said something about tenths and each one being 6 min?? I think I passed math with a 51 so help me out here lol. I tried setting my timer and nothing happened but I think had left it flashing in the “off setting so I’ll tru again leaving it on “on”. I had set it for 00.1 ON and 00.8 OFF thinking it would come on in 1 minute after I set it and off in 8 min.

Thank you sooo much for the video. I just bought a heater that looks just like yours from Vevor. The instructions in the manual that came with it are mostly wrong. Most (all?) of the other videos showing blue controllers match my incorrect manual. Their controllers look identical except the gear on yours and mine is a spanner on theirs. Anyway, my only other question is how do you prime? My manual says hold the gear and the down (right pointing) arrow. This does not start the prime. Please help! It's cold in here!

I extended the wiring myself after not being able to find an extension harness for the 3 wire plugs.

Thank you! I was about to buy a new controller because I thought mine was faulty. Turns out all of the videos are for the older ones that operate differently.

Have you figured out how to change from Celcius to Fahrenheit?

Hi, Nice video! I have a question for you, did you had any smell from your unit? I have just bought one and it smells like burn rubber. Thanks for your time

does it automatically prime? or do you need to do it on the menu as ive seen in other videos

Hello, I have the remote that he doesn't turn on, it's say all the time please wait, and I can not paring with the blue display, do you have any idea what can be, thank you

Did not work. Just got mine, blue LCC has the red circle. However the Primer would not activate. Pressed Settings and Down arrow with quick press at same time, pressed and held then released still nadda. SO this is what I did instead if others are having this issue. I had to remove the cover so I could see the fuel feed line. I then had to press and hold both the UP and DOWN arrows, this would manually run the pump. IF I let go of the buttons it would stop so I had to hold the buttons pressed down until I could see the line feed was full and had little to no air bubbles in it. I then replaced the cover and started the device, everything else ran no issues. Not sure why, but if folks press the settings and down arrow and get nadda this is a possible option. Otherwise loved the video, very informative...

Hi there. I can’t seem to pair my remote? Can you help me 🙏🏼

My temperature runs 208-218, I just got the heater and haven't changed anything yet. Is that temperature to high and if so how can I fix that? My heater also smells warm, the longer it runs the more it smells. No white smoke out of exhaust.

Hey Norm, I have the same Controller. I think this version is also able to run with 24 Volt . But I have an other question for you. How can I prime the heater before starting? At the older controller there was a menu where you can use a secret code like 1688. With this code you was able to change different settings like vent speed, Herz and so on. It's this new controller also able to take this secret codes ? Thanks in advance ✌️

Do you know where is that temperature sensor? In panel? Or somewhere else.

Hi there I have the same controller and remote as you, but still I can’t get it to pair? I have OC1 on my screen, and for pairing on my remote but nothing happens? It’s so frustrating.

Have you had a problem with a E-2 code? I turned it to the alpine mode and it threw the code

Is there a setting to just prime the pump. Also do you have to pair the remote every time the battery is disconnected. I just got this very unit and am try to set it up for the first time. Great video thanks for making it!!

I was wondering if the prime pump keeps running all the time? Because it is noisy

and will temp come on and off on temp or will it run all the time on heat setting

Do wee are able to ajust the temp for exemple at 14 celcius and whend the temps weel be at 14 celcius, this air heather will start ? And if they weel go on stenby if is to hot ?

I have the same unit and controller. Unfortunately I was told these can’t be calibrated.. mine is a pig on fuel..

great video --Ok I screwed up and started pressing buttons when first powering up - can you tell me how to get back to the starting point please so i can prime the line/heater - thanks

I' always send people to this video.

I have a heater that is giving me a e4 code. I have removed fuel pump and tested on a different heater. I have the code appear as soon as it’s turned on. Fan not spinning or glow plug not starting. Any idea what could be going on? Motherboard?

When are we going to get a controller that I can set 07:30 to turn it on at 730am !!!!! how hard can it be!

Is there a way to change from Celsius to Fahrenheit?

To prime press both arrow keys then the right one to stop.

Hi, how enter in special menù? For change parameter?...in the Owen manual there isnt this display, its explained for other display

Mine has the gold controller. It's slightly different. Anyone used it before?

Hi, can you tell me the combo Key that must be keep Press for activate the pump without start the burner, when the fuel circuit its empty? Thanks.

Got a new 8 kw unit Hooked it up put fuel in primed it and hit the start. It starts the fan and in about 10 seconds the screen goes black and then comes back. No start it does this over and over no start. What am I doing wrong

do you know how to get into the pump Hz. adjustment? other videos said OK and Left but thats not working on mine. All your combos work on mine so I assume its the same unit, also if you hold OK and Power it goes to a 000 screen that can be adjusted up to 999 but I cant exit that screen after and have no idea what the 3 digits are.

Can you set the fuel to air ration with this controller? If you hold the OK and Power button you get a setting that starts at 000 - what is that?

You are the best!! Finally 3 months later i connect my remote!! Thank you!!! One question how did you get temperatures like 176c???? İ put my heather on manual 6 and max i can get is 134c and you get 176 on manual 3? How is that possible? Have a nice day and thank you!!!

how far does the remote reach....bought this heater for my lil garage wondering if itll work from inside the house?

Witam jak sparować pilota mam ten sam sterownik pozdrawiam

My handheld remote was stuck in Chinese so if you hold the OK button it will put it into English. That said I paired my old remote, The newer one was Laggy. I was hoping I could have them bothpaired So I could have one in the car and one on my couch 🛋

Other controllers can set range for pump rate in Hz and fan RPM to accommodate incremental elevation change. Can this controller act similarly? How if so? What does Alpine mode do exactly? Unless it senses specific elevation, I can't see how a single alpine setting could accommodate elevation changes over hundreds of meters. I hear pump slow, but a fixed setting can't suit 1500 AND 3000 meters. I'm getting white stinky smoke at 1500m elevation with new 2km unit, which had worked fine here for a few weeks. Alpine mode doesn't help. Consensus: mix is the problem, so advice is to alter pump Hz and fan RPM. HELP thx and hny.

How do you turn the fan speed up.

Does this have the function to switch between temp mode and Hz display?

Anyone worked out if this one has a key sequence to get into 'advanced' settings like the other version?

I bought the Vevor 8kw, I have the heat running into my house. It makes my house smell like something is burning and gives me a headache. I expected it to smell at the first time I fired it up, but this thing has ran several hours. Has anyone else had this?