New To Live Sound Or Performing? LEARN THESE TERMS!

Рет қаралды 19,323

10 ай бұрын

Live sound encyclopedia: www.soundonsound.com/glossary/a
GEAR BREAKDOWN I USE AT THE VENUE: • Music Venue House Back...
AFTER SHOW PLAYLIST GUARANTEED TO GET YOU AND THE CROWD PUMPED UP: open.spotify.com/playlist/4ey...
Instagram: chrishammillphoto
Business: chrishammillphoto@gmail.com
GEAR I USE
Main Camera: www.amazon.com/Sony-Full-Fram...
Main Wide Angle Lens: www.amazon.com/Sigma-14-24mm-...
Main Portrait Lens: www.amazon.com/Canon-50mm-1-8...
POV Camera: www.amazon.com/DJI-Adventure-...
Drone: www.amazon.com/DJI-Mavic-Air-...
Live Mix Audio Capture/POV Drive Recorder: www.amazon.com/Tascam-Stereo-...
POV Driving Binural Audio: www.amazon.com/dp/B003QGPCTE?...

Пікірлер: 91

@wardulenaers 10 ай бұрын

As a sounds guy myself I can say you explained everything clearly

@chrishammillaudio 10 ай бұрын

Thanks!

@chrishammillaudio 10 ай бұрын

To the audio nitpickers with some things I misspoke: You’re correct and I misspoke. This system is *technically* not DANTE. It is AES based. The difference being AES runs single point to point with Ethernet, while Dante runs to a network with Ethernet. HOWEVER, this system can (and has) been converted to Dante systems for other gigs I used an X32 system. You need special gear to convert, but the concept is the same when you boil it down - you are sending and receiving audio signals via Ethernet. The fundamental concept is almost exactly the same. So yes, I admit the misspoken phrase, Dingbatz is AES based, but Dante systems also require Ethernet to communicate with the stage box and network, which is exactly what the system here does.

@djjazzyjeff1232 10 ай бұрын

A collab drum video would be amazing. For each instrument actually it would be awesome to see. I understand that could be tricky to coordinate with the venue and musicians but I'd love to watch it!

@chrishammillaudio 10 ай бұрын

I can basically come in whenever the venue has an off day. Just need to coordinate that schedule with the musician.

@AlbieReyes 3 ай бұрын

holy shit, I grew up going to shows at Dinbatz and now am a live sound engineer myself. Love that you're doing these videos in a place I would still call home.

@psychosis7817 2 ай бұрын

best demo video so far. well explained.

@joeybansuelo349 3 ай бұрын

Great video, great info! Love all your videos. Thanks, Chris!

@thegreatdeconstruction 3 ай бұрын

I'm glad I stumbled on this channel. I learned live mixing in church many years ago and got pretty decent helping our arts guild put on a monthly show. That was entirely on analog equipment so seeing how the digital stuff works has been mind blowing. Makes me wanna get back into it.

@DannRyan 10 ай бұрын

Loved the explanation of the DI Box. I put one on my pedal board because of you.

@chrishammillaudio 10 ай бұрын

As you should. Not only will it improve your tone signal but it will make FOH guys happy that all they need to do is connect a cable to your DI and they don’t need to worry about your signal.

@truckingwiththegman4833 Ай бұрын

Thanks Chris, well done

@_andtenorio 2 ай бұрын

Excellent Video! Very informative! Cheers from Brazil.

@christiand3429 10 ай бұрын

Loved this video!! Would also love to see the advance view you were talking about sometime in the future :D. Awesome job as always keep it up!!

@chrishammillaudio 10 ай бұрын

🤘 appreciate it.

@bobthegreat297 10 ай бұрын

thank you for this!

@chrishammillaudio 10 ай бұрын

My pleasure!

@colemartin9077 4 ай бұрын

Id volunteer if i wasnt in Colorado lol. Nice job man!

@robertschnobert9090 3 ай бұрын

Pretty neat😊

@johnviera3884 3 ай бұрын

at 26:02 The buttons that reduces the level of the signal are also called pads. example: a -10 db pad

@richardsc1174 10 ай бұрын

Nice video with great explanations. Looking forward to your next uploads. Greetings from Germany :)

@chrishammillaudio 10 ай бұрын

Thanks for watching. Glad you enjoyed.

@unlockdworld 10 ай бұрын

Thank you Chris! appreciate the effort here with a bit of basic crash course on the X32.

@chrishammillaudio 10 ай бұрын

I’ll create some advanced mixing content for sure.

@unlockdworld 10 ай бұрын

@@chrishammillaudio Thank you! btw I'm from the Philippines and sharing your channel to my friends as well , your tutorials and setup really help us to understand everything. We appreciate your effort!

@chrishammillaudio 10 ай бұрын

Glad my tutorials helped. Cheers!

@kevinbrennen6773 10 ай бұрын

And make sure you have a power strip from 1982 on stage. Just poking fun brother, love your videos!

@chrishammillaudio 10 ай бұрын

Hey now, that power strip from 1982 was factory sealed! It was in mint condition!

@AKSKMY Ай бұрын

Hope to learn more advanced skills/tips such as compressor especially!

@cattythecat9161 Ай бұрын

First i thought "ewwww behringer..." but i really started to love this console. You`ve got so much tech integrated that you mostly dont need a side chain. There so much you can do with it and makes it easier to hold Oversight over everything. 😁

@chrishammillaudio Ай бұрын

If this console is good enough for national touring acts to use for their front of house or monitor systems, it’s good enough for us.

@cattythecat9161 Ай бұрын

@@chrishammillaudio its absolutely its money worth 👍 Even with the snakes... you replace a large chest of cables with a "skimpy " network cable

@djjazzyjeff1232 10 ай бұрын

6:00 I bet most bands know this already, some might not. DO NOT go over your set time especially if you're early on the bill. Don't fk around when you're supposed to be getting your gear out of the way, basically just be courteous to those you're sharing the stage with and it will go a LONG way.

@chrishammillaudio 10 ай бұрын

That’s a “golden rules” video I’m going to make for both bands and sound guys.

@micahbrill 3 ай бұрын

Helpful

@Gooden_Eye 10 ай бұрын

good video, thorough but not over-splaining

@chrishammillaudio 10 ай бұрын

🤘

@ADPuckey 10 ай бұрын

Thanks for the video! Personally I'm not involved in live sound and I don't plan on it any time soon but I'm very curious; I've never touched a console but I'm pretty comfortable in Ableton and have a half-decent understanding of audio engineering. I would really love to see you go more in depth on everything you do, especially a more detailed breakdown of the adjustments you make during the set. It was nice to see you break down the layout of the console and talk a bit about how you have your sends set up. Your channel is my favorite live sound content on here. Cheers

@chrishammillaudio 10 ай бұрын

I’d be happy to make a more detailed process explaining what and why I do what I do.

@lijeiii 3 ай бұрын

Excellent video. Is “front of stage” also “up stage” and “back of stage” also “down stage”?

@BobStaff-ib3nl 20 күн бұрын

front of the stage is down stage, back of the stage is up stage. Its easier to think of it as a slope. You wouldn't be able to see the back of the stage if the front of the stage was "up". the terms also came around because theater stages were literally sloped for the exact reason of the audience being able to see the whole stage.

@russellhill1981 10 ай бұрын

Can you explain how you are using DANTE? Like, how it's implemented and why you use it. Maybe what benefits you receive by using it?

@chrishammillaudio 10 ай бұрын

I explain it in the video. One cable instead of many XLRs, data flows fast and it’s a clean setup.

@russellhill1981 10 ай бұрын

@@chrishammillaudio Oh, I thought there was more to it. Thanks

@EDLEXUS 10 ай бұрын

It's not Dante, it is AES50. AES 50 just combines 48 signals per direction on one ethernet cable instead of a big analog snake

@chrishammillaudio 10 ай бұрын

The concept is exactly the same - using Ethernet to connect audio sources for a stage. You can take an AES system and make it Dante with some conversion gear. The concept of running signals via Ethernet remain the same.

@corymaynard7704 10 ай бұрын

Hey you mentioned guitar players using a Kemper would need a DI box. All of the venues I've played at just give me an XLR cable to plug into the main output on my Kemper. I always assumed it just connected to the FoH stage box, but are you saying it's actually going to a DI box first?

@chrishammillaudio 10 ай бұрын

No. What I am saying is if you go direct from any amp source, there is a chance you might need a DI box. Especially if the sound coming from your amp is not the cleanest of signals. I would invest in a DI box for yourself anyways. Most of the time any modern DI amps for guitars sound just fine on their own, but you never know.

@ProDoucher 10 ай бұрын

Bruh, I stopped doing hip hop shows too, probably for the same reasons lol

@chrishammillaudio 10 ай бұрын

You don’t like your equipment being smashed, you and the venue being disrespected and your safety being threatened because a rival “artist” decided to hire a hit squad to shoot up the club because the artist performing just happened to be born on the wrong block? That SCREAMS happy working environment to me!

@jamesburke2311 10 ай бұрын

Never once have I heard front stage or back stage, always upstage (further from audience) or downstage (closer to audience).

@chrishammillaudio 10 ай бұрын

Only heard those terms once, but they are commonly used too.

@jamesburke2311 10 ай бұрын

In the small city where I work most engineers at the rock clubs also work at the big historic theater - for lighting cues and theater stage plotting I know its up and down, maybe less so in rock venues but we all just transfer the same lingo we use in the theater.

@Xolanidj Ай бұрын

I come from the Hip Hop culture, and I don’t like running sound for rap shows. Especially with local rappers.

@chrishammillaudio Ай бұрын

The stories I have 😂 I refuse to ever work them unless they’re older crowds.

@lth3may029 13 күн бұрын

As someone whos worked on analogue, digital, and hybrid systems I understand the advantage of each. I just wanted to ask quickly if youve ever heard of a mixer with a fully analogue signal path but digitally controlled automation? I feel like that would be the ideal system right?

@chrishammillaudio 12 күн бұрын

Analogs point is to not have digital automation. I use a Tascam model 24 to record. Nice warm analog sounding pres with full digital conversion.

@redcomn 10 ай бұрын

Stage time is just a suggestion for the band from where I’m from. They never even prepared for any shit even when there’s competent stage manager

@chrishammillaudio 10 ай бұрын

Cut their set and tell them times up. They’ll learn fast.

@Kryso_0 2 ай бұрын

Dating yourself? I just bought a 4 port router for my living room setup to sub to our wireless router. Cat5 still the best

@chrishammillaudio 2 ай бұрын

Perhaps?

@frankeeortiz 6 ай бұрын

if i wanted to be a sound guy for a live music venue what would i have to do to achieve that

@chrishammillaudio 6 ай бұрын

kzfaq.info/get/bejne/h9l7mZx3qs6lZKs.htmlsi=9Z-n49VJpMqk-GRS

@r4productions440 6 ай бұрын

Do I NEED to go to school for this or can I grow a career without a degree?

@chrishammillaudio 6 ай бұрын

No.

@dangerdc5482 2 ай бұрын

What is the point of a stereo delay when your speakers are mono?

@chrishammillaudio 2 ай бұрын

The PA is not in mono…

@dangerdc5482 2 ай бұрын

@@chrishammillaudio ah, nevermind then! I must've misunderstood something you said earlier, I forget what you said but maybe that your PAs are one mix and the Sub another or something. I can see myself mishearing that. I'm just starting to learn this stuff in college and I'm wary of using anything stereo whenever people are going to be sitting right up against the PAs

@robertschnobert9090 3 ай бұрын

What about using an IEM?

@chrishammillaudio 3 ай бұрын

Pretty straight forward. Connect a bus output on the snake to the IEM receiver and make sure the channel on the receiver and actual IEMs match. Bands are free to bring their IEMs. We do not have house IEMs.

@BikerEgg1 10 ай бұрын

Is DANTE the same as ULTRALINK?

@chrishammillaudio 10 ай бұрын

@lobakgo6843 10 ай бұрын

How do I eliminate feedback if I have many mic ?????

@chrishammillaudio 10 ай бұрын

Use an EQ to find the source of the feedback and cut that frequency on the instrument causing the feedback.

@lobakgo6843 10 ай бұрын

@@chrishammillaudiocan I just eq my monitor output, if have feedback, cause my stage have 16 mic lol

@pvampman 5 ай бұрын

Where is this venue?

@chrishammillaudio 5 ай бұрын

letmegooglethat.com/?q=dingbatz

@produkcijaprodukcija4583 10 ай бұрын

part 2?

@chrishammillaudio 10 ай бұрын

No need for a part 2 when I link in the description every advanced term you’ll ever hear. Like I said in the video, if you guys want a demonstration of what I look for in a mix I need volunteers.

@produkcijaprodukcija4583 10 ай бұрын

sorry, my mistake I meant what you said about second video where you who eq,effect, ect..@@chrishammillaudio

@aydenmarshall8546 10 ай бұрын

Why is 0db called unity?

@chrishammillaudio 10 ай бұрын

The output of the signal at that level matches the level of the input of the source. Every piece of gear is different but that’s the theory.

@tdz69 10 ай бұрын

What’s up with the hip hop shows? Lol.

@chrishammillaudio 10 ай бұрын

They suck, the “artists” never listen to any rules of the venue, some have threatened me and oh, sometimes they bring guns. F that. I want to feel safe when I work.

@the80way56 3 ай бұрын

I was gonna ask the same thing 😂. At first I was offended but then I said let me see why. And there it is SMH WE GOTTA STOP THIS FOOLISHNESS MY PEOPLE ❤

@owlancaster Ай бұрын

why do you refuse to work hip hop shows

@chrishammillaudio Ай бұрын

Too many instances where my life was threatened, the “artists” and crowds were disrespectful to me and the venue and several goons in squads tried to bring guns into the venue, among other instances of not feeling safe working. Brawls and fights breaking out are far too common. Also, promoters not being able to organize anything properly and shows going several hours over schedule because “artists” can’t be bothered to show up on time.