Thanks for the video! The part number for the Hinge Lever Micro Limit Switch is KW4-3Z-3 and I ordered from eBay for 5 for $5.00 , my lower switch went bad and quit clicking.

Even 6 years later this video saved me a lot of money. Kudos for posting this and keeping it up for this long!

My ice maker had the exact issues and now it works! Thank you for this repair video. SO easy!

Thanks for posting this. I had the exact same problem with my Koldfront ice machine, which looks identical to the machine in the video. I did the fix that you showed and my machine worked again. Your explanation and video was very clear and precise. Easy fix!!!! Took me 10 minutes. Thanks ever so much!!!!! Saved me from having to purchase a new machine.

Just wanted to say how helpful this video was. I scored the same ice maker at goodwill for $13.20. Got it home and it would not cyle to cold nor pump the water. Fixed a few loose screws that appently were left fromthe last owners attemp to fix and bent the straight upper tab to match the other tab. Boom!!! the things been dropping loads all day. Of ice. Its awesome. Thanks for the posted video and direction. It was exactly what i needed to get it working.

Exactly what was wrong with our unit. Fixed in less than 10 minutes. Saved us a few bucks. Thanks for the info. Great Vid

Thank you for a great video all the way around. I have a brand new unit that was purchased at an auction that was not working, and I believe this is the exact same issue. This was so helpful.

Thanks for the video. It was a big help. The problem I had wasn’t exactly the same but did involve the actuator switches

Great video..thank you..had the same problem..fixed it in 10 minutes

Thanks for posting video. I had what appeared to be the same problem but the root cause was a cracked water trough coupling at the drive motor. I fixed it but required more disassembly and gluing the cracked trough.coupling ("D" hole) I think the fix of bending the "actuator" level (microswitch) may in fact compensate for the real issue (in some cases) which is the cracked drive connection of the trough to the motor. Your mileage may very....

So I found a "brand new, in box" AI100BK in a liquidation store's dumpster last night! So since it was a liquidation store, who knows what the item's actual past is. But I was stoked to find it nonetheless. I got it home and tested it out, and I had the same issues as the one in the video. It would power up... the scooper activated and pushed forward... it waited about 30 seconds to a minute, and the scooper device went back to it's default position, and the "add water" light came on. That's an easy fix, just add water right? I couldn't believe I didn't think of that. BUT, after adding the water, I still got the same results. I came to trusty dusty KZfaq, searched "repair AI-100", and this was the first video to pop up. I read the video description, it was exactly the same issue that I had. I watched this video, and was stoked to find out it was an easy repair. I took the back off, and low and behold, the little metal flappy flapper was straight as an arrow. I bent it a little, just like in the video... plugged it back in, added some water and watched what would happen... And all that happened was the exact same thing as before. Everything looks to be moving, shucking, and jiving correctly. But, there is absolutely no sound coming out of the water pump that joins the water tubes. Also, and it goes without saying, I could see water making it's way through the lower tube towards the pump, but no water making it's way up the upper tube that goes to the cold icy maker area. I pinched the lower tube, and could force just a tad pole's amount up the upper tube. But literally just like a milometer. That kinda tells me that there's no clog, but also that it's probably the pump itself that is faulty. And also, I made sure that all of the wire connections were secure to the green board, specifically the one labeled "pump". All was fine, and it still doesn't work. Like I said, likely the pump itself. So, I went to Amazon and eBay... no luck. But I did see one that recently sold on eBay for like $20. I was like dope! That's not bad at all. But where can I get one? Googled it. Fount the official site for NewAir. They sell it for $22.90, shipped. Funds are tight right now (hence the dumpster diving [see my videos!]), so I'm gonna have to wait a little while for it. Unfortunately the prices of these ice makers have gone down a lot since this model was brand new. I could sell this one, as-is, probably for around $50ish, give or take, maybe. But I actually really want this for myself. So I'm definitely gonna hold out and buy the pump. I just hope that that is actually the problem. Or at least, the only problem. Anywhosies, I'm just being talkative, because I'm so hyped for this dumpster find! I mean, a FREE (practically brand new [likely a return at some point]) table top ice maker! That's just precious! If you've read this far, no matter who you are, if you would be so kind, come to my channel and watch my dumpster adventures. I actually put a lot of work into my editing and what not. Too bad not too many people have come by for a looky loo as of yet. So hey! Let's change that, shall we?! lol See ya there! :D #SpamButNotSpam #xoxoxo

I have an A1-400SB that the fill tray won't drop. I can pull it down but It keeps going back into the empty position so it won't fill.. What could cause this. It's an older unit I hate to get rid of because everything else works. It has hot/regular/cold water and ice...uses bottle on top.

Awesome video

Thanks for posting your video. It really helped me understand the machine. Unfortunately for me the water tray cracked at the swivel point on the right side. It doesn't look like it can be fixed unless you think it can. Any suggestions?

I have the same unit. We have had it for two years. It started acting up lately. Everything works, except for the freezing part. The unit started freezing the ice cubes into clear pieces of ice that would melt fast, then finally it stopped freezing or making ice cubes at all. Any suggestions on what to look for or how to repair it. We love this machine.

I have the same ice maker everything is working except it will not make any ice. It does not seem to get cold enough the prongs that is. I've tried everything I can think of but I'm no mr. Fix it. Any idea of any quick tips before I have to toss it in the garbage.

Hi! This video was super helpful, I had the same problem that my machine will not refrigerate or pump water and the steel bar was flat. However, once I bent it like you did I noticed that the switch often doesn't even move to hit it, any idea what I could do? Thanks in advance!

Good video! thanks.. CLOSE RELATED PROBLEM ..I want to add a close related problem for people to look at... On the other side of the ice maker where the motor is. My hopper cracked where the motor shaft went in. Meaning the ice hopper WOULD TURN back and forth and the lever by the limit switches may hit one but not the other ONLY because the motor shaft was slightly slipping in the cracked hole it goes into the ice hopper... Hope this helps someone

Hello! I know this is an old video but you might help me, My ice maker works nromally at least the mechanic parts BUT its only making 3-5 out of 12 ice cubes, any idea why that could be? Ive notices that the metal tubes (the ones that freeze) only those 3-5 are the ones really freezing a lot, the others dont.

Hi! This is a long shot that you might answer but any idea why it would be making the ice but only 1-2 pieces drop off

Thanks Tony

Mine doesn’t look like this it has little mini ice cube tray. Water freezes in it dumps into tray.

I have this same unit, I use it on the weekends during camping trips. However last weekend I plugged it in and filled with water but the unit would not come on. I have checked all outlet plugs and breakers. Any idea of what could be wrong and how to fix it?

if those prongs are all rusty, is it done? unable to clean?

Mine is only making tiny pieces of ice and only 2 or 3 at a time even though I have the large size showing on the panel.

How do you replace the basket full sensor

My icemaker 's reservoir is moving in opposite order. While pump pumps water reservoir stays up and so there is no water and reservoir under the sticks which makes ice. I place the reservoir manually under the sticks and ice been built but then while shovel must push the ice pump sends water on the ice. Totally a mass, I opened sides and back and see nothing wrong. I hope you can help me 😭

Mine is brand new, will not make ice at all, don't know if I want to take it apart unless I know what I'm looking for, but I bought it to make ice.

Did you even look at the condenser to see if there was any dirt on it.

I had to slightly bend the tab of the top switch for it to activate

I have this same unit, my switch doesn't even rotate:( Looks like I need to dig a little deeper and possibly replace a motor..

These are the replacement relays to order: OdiySurveil Long Hinge Roller Push Button SPDT AC Lever Type Miniature Micro Limit Switch Model XSS-5GL13- On Amazon for less than $8 for a 5-pack

Can the front be taken off?

Took me 5 minutes to fix. Hah! Beat the 10 minute guys x2...

What about the other side or where the motor is that pivots the tray back and fort? I think something on that side is broken on ours but you didn’t show anything of the opposite side of the MICRO SWITCHES? I can move the basket slowly back-and-forth, touching both switches, and then causing the water to fill and freeze. But the tray will not move on its own. I’m thinking a gear or lever on the other side or a bad motor? Video or picture of the other side would’ve helped.

You have cloudy ice because you have hard water!!!

6:15 8:21 - reverse

Helpful but far too long. Thank you though.