Adjusting cabinet doors is a critical step in making your new kitchen look its best. In this video, Shane gives you step by step instructions on how to adjust your soft close cabinet doors.
Пікірлер: 53
@1NaturalGlam2 ай бұрын
I spent hours trying to figure this out on my own. Thank goodness I found this walkthrough! Simple and easy! ❤
@alexandrinaruiz89319 ай бұрын
Wow. That was a lot of info at once. Ima just grab my screwdriver and get to it 😂
@Teresa-xq5ut3 жыл бұрын
Thanks so much! Have a great weekend!
@PINEAPPLEKELLY32 жыл бұрын
Thanks hope this work with the hinges that I got on the doors in the bathroom cabinet.
@JillKnapp2 жыл бұрын
Wow! This was super-easy. Thank you so much!
@terrykrause69473 жыл бұрын
Can you do a video where you explain, in close-up, what is the function of each part that makes up the hinge?
@som19802 жыл бұрын
www.wikihow.com/Adjust-Kitchen-Cabinet-Doors
@niveditakambli4828 Жыл бұрын
Good tutorial, very precise
@marinechapssemperfiout9939 Жыл бұрын
Great presentation!
@kellyfoster954910 ай бұрын
Worked perfect! Thank you!
@theelmz592310 ай бұрын
Thank you so much! 🙌🏾🙏🏾
@perrypelican94762 жыл бұрын
I have another way, not saying better but I thought I would collaborate. While door closed, look straight at the vertical hinge side to see if the top or bottom hinge needs adjustment to make the door edge flush with the frame. Usually it's the top hinge that needs to be adjusted to pull the door in order for it to be flush with the frame. Once the top and bottom are flush, you are done. It's rare that both hinges need adjustment unless you adjust by alternating looking at the horizontal and then the vertical. Stick with the vertical alignment and the horizontal will be done automatically. Again, usually the bottom is flush and only the top needs the tweak. I love to tweak.
@dch16483 жыл бұрын
Who knew ..will give this a go!
@anndaley40013 жыл бұрын
This actually works and it was so easy I am still gloating
@NewLeafCabinetsCountersTacoma3 жыл бұрын
Glad it helped!
@Brandon-nr8fn6 ай бұрын
Thank you
@atasagun14378 ай бұрын
Thank you very much
@StephenTinius10 ай бұрын
For full-overlay doors on a cabinet with a face frame (like the ones in your video), should the reveal be the same on all four edges, especially the same on the top and bottom? Or, as I have seen in some examples, should the door be centered left and right, but have 0" (zero inches) reveal on the bottom edge? I am adjusting the doors on a cabinet over a microwave and I have some cabinets that are stacked, two and three high. Thx,
@bendonahower53252 жыл бұрын
Turns out that my hinges don't have these adjustments, which is what the trouble was. This helped clarify the issue.
@judytrumpjohnson7153 Жыл бұрын
Thank you.
@DiecastAirplanes3 жыл бұрын
Thank you Sir.
@NewLeafCabinetsCountersTacoma3 жыл бұрын
You are most welcome
@drewphy23914 жыл бұрын
My hinge side on the face of the door when it is closed is pushed out further than the hinge side of the cabinet net to it. I have adjust the screws and it won't get any closer. Would I have to reposition the adjustment bracket attached to the cabinet side to get the gap closer. Not sure if my question is making sense.
@fitofito1 Жыл бұрын
Lol he makes it look very easy 👍🏼
@diyrenaissance6437 Жыл бұрын
I added shakers to my flat cabinets, and now the doors like scratch as they open. Any advice? Should I get new hinges? Or do I need to make my cabinet doors thinner?
@user-fq7vw3gi8u5 ай бұрын
I'm thinking change these old hinges??
@JmsLatinoHeat2 жыл бұрын
How do you adjust old style hinges.
@andysok064 жыл бұрын
this is only when the door is already closed and the only misalignment. what about when the door doesn't close completely and pops out? I tried adjusting the level and angle and still doesn't close. it's very tight.
@dudleyhanks4383 жыл бұрын
It's easy enough to tighten the vertical adjustment screws. The problem is they come loose in a matter of days. Is there a trick to making them tighter?
@NewLeafCabinetsCountersTacoma3 жыл бұрын
If the screws are coming loose its typically a "stripped" screw situation to which there are a couple solutions. The easiest way is typically to get a slightly longer or thicker screw. The other way is to get small pieces of wood, such as a toothpick and stuff it in the hole with some wood glue and then add the screw. I'm sure there are good videos out there for screws stripped in wood.
@nokiot92 жыл бұрын
Mine has these double screws that affix the hinge to the cab. With this little cup area that seats into the arm. The instructions said I have do loosen them all? It looks like you hit the “horizontal” screw but still lifted it 🤔 “not all hinges are created equal” indeed
@nuyorican78 Жыл бұрын
In my cabinet, there's a gap inbetween (the middle) of the left and right doors. what do i have to do to close that gap?
@Bonezz0244 жыл бұрын
Is it possible to adjust non-Euro hinges?
@TheProfessorwaldo4 жыл бұрын
These are not euro hinges.
@extorter2 жыл бұрын
what i dont have all those adjustments on my hinges? they just have the mounting points..
@Blue_Rose19733 жыл бұрын
Yeah. We are not cabinet ou installers. I still dont understand. I have 2 aligned doors that overlap. They are also adjusted all the way back. How do I fix this?
@nevaehyouells41133 жыл бұрын
Me too 🤦🏼♀️
@leanneberry83613 жыл бұрын
Same
@callumbarton7259 Жыл бұрын
Better late then never but if both are wound all the way back and it still overlaps I think the doors are too big for the cabinet I wouldnt suggest cutting the door as it never leaves a good finish I'd instead replace with a suitable size door which should be 6mm smaller then the cabinet
@zspeed34 жыл бұрын
Informative but there is room for improvement with the camera. Could have zoomed in when adjusting screws
@NewLeafCabinetsCountersTacoma4 жыл бұрын
What can I say. I'm a carpenter not a videographer.
@nzmrp52938 ай бұрын
my door falls after adjusting the screw. damn what should I do
@burbus15673 жыл бұрын
doesn't xzoom in on which screw to unscrew so basically yuselessa
@sd30001Ай бұрын
Would be much better if the camera person actually zoomed in when he made adjustments so we can actually see what screw is being adjusted 🙄
@alanlisting20802 жыл бұрын
Not a video on how to adjust cabinet doors. Just a video how to adjust those particular hinges
@mewing-gawd2 жыл бұрын
For me the whole hinges are off
@anhonestman123410 ай бұрын
That’s a 3D chess set until you get some practice ..
@joanlofts56594 жыл бұрын
Need a close up of what your doing inside the cabinet.
@anthony28002 жыл бұрын
Bruv what cheap company uses those crappy kind of hinges?!?
@melkennedy41954 жыл бұрын
Sorry - no idea which screw you are adjusting, so unfortunately the video is pointless.
@NewLeafCabinetsCountersTacoma3 жыл бұрын
Sorry it didn't help, we are just a couple of carpenters with an iphone, not profession videographers.
@TerryRam183 ай бұрын
You’re not showing which screw you are screwing for each adjustment. Zoom in!
@stevenraeburn81782 жыл бұрын
Not a great deal of information in this video - with a 1 case scenario...I still feel uninformed...