Newlyweds Established sign (CNC)

Рет қаралды 5,976

2 жыл бұрын

On this video I will CNC engrave a Newlywed couples established sign. This sign is done on 3/4" Oak utilizing Vcarve and profile cuts with a 90v and 1/4" and a 1/8" end mills.
Iwata Revolution airbrush
amzn.to/3eR3Mth
Nema 34 Stepper motors
amzn.to/3osYXtd
Whiteside 90 degree V-bit
amzn.to/2BTIqL8
Whiteside 60 degree V-bit
amzn.to/33TrIpy
Mach 3 by Artsoft
amzn.to/3bAzj0q
3M Worktunes with Bluetooth
amzn.to/2S7EBK9
3m Safety glasses
amzn.to/3f3C5xm
Dust mask
amzn.to/2QCf6Ad
Camera quick release
amzn.to/2RDmNX8
Sony Handycam
amzn.to/3bH4Jm6
70" tripod
amzn.to/3wo9gSg
Yonico 1/4" end mill bit
amzn.to/3oA0DkC
1/8" end mill
amzn.to/3wo9t80
1/4" Ball Nose bit
amzn.to/3v7xX5a
1/8" Ball Nose Bit
amzn.to/3oDyWrs
60 inch ball screw (need 3 of these)
amzn.to/2RtWTVU
Pair of Linear rails 60 inch
amzn.to/2T5CTtj
3kw air cooled spindle
amzn.to/33THiBF
breakout board
amzn.to/2T0m3fg
z axis sliding table
amzn.to/3ylKe7T

Пікірлер: 33

@CynthiasCraftsandmore 2 жыл бұрын

Hi Brian, WOW, that turned out great!!! Thank you for sharing! Hugs and love to you and your family. ❤✝🤗 Have a beautiful and blessed week. God Bless ❤✝🤗

@SmokeysCNCWoodworks 2 жыл бұрын

Thank you, using Oak always make them look better in my opinion, it just cost a lot more per sign...Thanks for watching!!

@larrytremarki9458 2 жыл бұрын

As usual awesome job Brian. Keep up the good work and thanks for sharing.

@SmokeysCNCWoodworks 2 жыл бұрын

Thank you and thanks for watching!!

@nancyinnevada2785 2 жыл бұрын

AS ALWAYS ANOTHER EXCELLENT JOB, THEY WILL LOVE IT 🦅💗🤍💙🦅

@SmokeysCNCWoodworks 2 жыл бұрын

Thank you and thanks for watching!!

@johncarlos7810 2 жыл бұрын

Such inspiration!

@JohnColgan. 2 жыл бұрын

Lovely job again Brian

@SmokeysCNCWoodworks 2 жыл бұрын

Thank you, I'd love to do a lot of stuff in woods like Oak, but $$$$ stops me!!

@JohnColgan. 2 жыл бұрын

@@SmokeysCNCWoodworks I use lots of reclaimed timbers. Old furniture etc, it does need skimming to remove surface layer. & Often a feed of oil as it's old & dry. Downside is it's never regular sizes & needs the extra work & glue ups, but often beautiful finish of well seasoned timbers. Cutting into old pine releases that ...Mmm aroma. !!!

@thehamlinwoodshop 2 жыл бұрын

Looks great. Nice job and thank you for the video!!

@SmokeysCNCWoodworks 2 жыл бұрын

Thank you and thanks for watching!!

@timbeck5825 7 ай бұрын

Awesome

@richardM980 2 жыл бұрын

Nice Work!

@SmokeysCNCWoodworks 2 жыл бұрын

Thank you and thanks for watching!!

@marksimpson7353 2 жыл бұрын

I love the rope detail. Good job, now let's do another photo v carve. Lol.

@SmokeysCNCWoodworks 2 жыл бұрын

Lol, I"m working on a good photo for, believe me I like the Photo Carve too, its amazing...Thanks for watching!!

@codymiller2940 2 жыл бұрын

You should look for a house in Arizona. Then I could come watch the cnc run. Good luck on the house and shop hunt.

@SmokeysCNCWoodworks 2 жыл бұрын

Lol, its beautiful out that way, but our grandson lives in the norther part of Oklahoma, so I Imagine we are going to moving closer to him, I'm still working on what i'm going to do with some of the wood you sent!! Thanks for watching!!

@backyardgifts9461 Жыл бұрын

Where did the rope file come from?

@markketzner1306 2 жыл бұрын

Great job. Is that waterproof stain and sealer you use or just stain?

@marvinmurray9630 2 жыл бұрын

I love the video and hope to have my CNC in a week or two. I am new and learning so just wondering why did you use the jigsaw and not let the CNC cut the perimeter?

@SmokeysCNCWoodworks 2 жыл бұрын

I could do the whole perimeter it would have however added another 35 minutes to the cut, I can use a jigsaw much faster....basically i'm to impatient and get tired of watching it go around and around......Thanks for watching!!!