I've seen a lot of these type of videos but I think your is the most detailed. Some videos didn't say you needed an AC to DC adapter and/or 12-24vdc. Great video

I remember learning how to do that back in April of last year when I first started collecting fire alarms I had trouble at first, but when I tried on another, DC power supply, it worked, and I was really amazed how I hooked up my first fire alarm and pull station and got it to work. I was using the notifier NBG 10 duel action and a wheelock RSS 24MCW i’ll never forget that day how I hooked up my first fire alarm without a panel or being mounted onto the wall and got it to work

I have seen a bunch of these but I feel like this one is more in-depth.

I’m going to have one of these when is my birthday so thank you I can finally know how to wire it so I don’t have to like read the instructions

I use a 24VDC adapter to wire up fire alarms individually (e.g. doing alarm reviews). Not only it will work with pull stations, but it can work with conventional smoke and heat detectors and even key switches!

Thank you I’m able to have my Edwards 270 to my weelock strobe

Thank you. I'm going to set up a fire alarm system in my house.

You know I never thought about the possibility of doing this! I bet if you hardwired a good enough transformer you could power a whole string of pull stations and annunciators.

Really cool video!! I hope one day make my own version of doing this!! Stay safe and have fun!!

I did this before I got my panel. It's the cheap way of doing it if you don't wanna spend a lot of money on a panel right away.

This video was really helpful for me in the past, however, could you show us how to do one with a speaker/strobe using a triggerable mp3 player?

I just used 2 9V batteries and it worked perfectly fine :)

Are you able to please send me links for the adapter and the other wire you used? Thanks!

Thx this very help me this much

cool good tips to know

@NIC'S - SYSTEMS & ELECTRIC i've always wondered if smoke alarms especially the gentex with the strobe can be wired to a pull station or even an alarm panel

Thank you this was really detailed. Now i can wire up my Wheelock MIZ to a 270SPO. But will FWR Current harm my Wheelock MIZ Horn?

A single 9V works for a system sensor P2RL

You know, with the BG 12, you actually don't need to flip the switch back up to reset it. When you close the pull station when resetting it without flipping the switch up manually, it will automatically flip the switch up.

I have a question. How can I set up a battery as a backup power source, connected to our main power source?

Can you do a video of you doing more alarm and pull station

ive been looking for so long i want a tutorial where it shows with battery's instead but not a adapter

How do you connect a pull station with a bell and a smoke detector

A video would be good how to wire a smoke detector directly to a NA. I’ve don’t it before but most people don’t know how.

Can you make a video on how to do this with a BG-12? And where I can get a good wire? Sorry if the comments are getting excessive, I am new to fire alarms, and I want to make a hobby alarm.

Can you put a link to that power supply.

Is it possible to install two strobes to the same pull station?

Nice

How did you connect the power adapter to your device? I don't see it on your video.

my AC/DC adaptor says output 12v=2A it will work?

Hey! I'm getting a wheelock 46t g6 and it needs 18-31 vdc. Can you send me a link for a good adaptor for it? If you search on eBay and click the pictures, you can see the back of the alarm for more info :)

Ive seen that fire alarm at school in a fire drill

My buzzers for my fire alarm system can operate from 3-24v!!!! So I can use usb power or use a 9v battery!!!!!!

I've done one years ago that was 120v do you know where I can find that video?

Cool

Btw I used a 12v dc psu to power a coin acceptor

nic i have this

I wired my pull station to buzzers so when I pull the pull station it will sound the buzzer

Is this System Sensor device a P2WA?

Is the adapter required?

Do I have to have 1200mA

I thought we didnt need an adapter to wire the devices, I might have to get one someday

I subscribed

Old school pull station on a modern alarm thats pretty cool

Do a video on how to wire a fire alarm to a normal on/off switch (for those who don't have or can't afford pull stations) My fire alarm that I have has wires that connect from the on/off switch to the alarm's mounting bracket. The on/off switch is located outside on the single gang metal back box and the wires are inside of the single gang back box. Mine is a System Sensor P2R

I do that method

I saw the same thing in another channel

Where did you get the plug-in adapter the AC adapter

My strobe doesn’t go off, and my alarm is not that loud, I have a p2rk similar to yours, anything that might work? I’m using a 12V power supply I’m not sure if it has to be an or dc though

how do you do this with out wiers

Is it possible to make a voice evac without the panel? If so, can you make a vid? My home need to start practicing fire drills just in case there is ever an emergency.

How many horn strobes can you add ??

how to do it with addressable truealert?

What brand strobe are you using?

Could I run about 4 horn strobes (NS and ZNS), a RRS, and a simplex t bar off of a single adapter, I also will be running them at a distance so there will be a voltage drop, would this work, how much does the t bar, ZNS, NS, and the RRS pull?

How do I do it with the batteries tho?

Link for adapter?

Does it matter if it is AC or DC?

Could I run multiple alarms on 1 pull station?

How do I just wire a spectralert advance to a battery and make horn and strobe go off? With no pull station. Also where do I get fire alarm wire??

The DC adapter not the AC

Easy, what volt does the horn strobe?

Cool