Thank you so much for giving us your time and explaining everything in detail, you did such a great job! Thank you!
@jkvanderyt3 жыл бұрын
I really appreciate you making this video. I recently installed one on my Bass boat and have been so frustrated trying to make simple changes to my screens and doing basic adjustments to information on my screen. This video really helped me figure out how to get the most out of my Lowrance! Thank you and I can't wait to see Part 2!!!
@nightanddaymarine88233 жыл бұрын
Part 2 will be coming soon. I will hopefully have it up by this weekend. It will cover all of the internal menu settings and functions.
@timbeers3613 жыл бұрын
I brought the 9FS and installed on my kayak. Great information in the video can't wait for part 2.
@Internutt2023 Жыл бұрын
LOTS of good info! , thank you for taking the time to do this and share it. I just got a FS-9 and I am wanting to learn as much as possible about functions, and this presentation helps a LOT! @ 28:13 is a great setting change as well. It lets you also pick out things like the difference of a brush pile and the actual bottom, as well as finding fish on the bottom, and I don't think that any other companies sonar does this.
@rayskaines68192 жыл бұрын
Finally, a great tutorial for us Lowrance beginners. Bar none, the is best video that gave me an in-depth lesson I needed to operate my Elite 9 (ti2). Thanks for posting Part 2. Your the Best. Subscribed.
@nightanddaymarine88232 жыл бұрын
Thank you! I appreciate the compliment!
@robsteele12043 жыл бұрын
Looking forward to part 2
@Moondog93223 жыл бұрын
Excellent, as always.
@nightanddaymarine88233 жыл бұрын
Thank you!
@moosechop762 жыл бұрын
Thank you for the leaning video. Can’t wait for part 2
@JohnnyCab2 жыл бұрын
Wow there sure is a lot to learn . I just purchased the Elite 7 but not easy to learn yet . Thank you for going into detail on it's features .
@stevo36442 жыл бұрын
This is such a great video and explains so much in an easy to understand manner. I have just bought one of these units and looking forward to trying it out.
@Marcos_reyna2 жыл бұрын
Oh how I loved that hard rock casino , while working at the Tulsa refinery 🤟🤟
@elirocha8548 Жыл бұрын
Received on time and was packaged well. Set it up on kayak and looks great. Haven’t used it on water - temps in the 20’s - but looking forward to going next week when it warms up. Will update if anything fails. Otherwise 5 Stars.
@rusticbro14032 жыл бұрын
I really enjoyed and learned a lot from your Lowrance Elite FS full Basics training. Any update on when part 2 is coming out would be appreciated! Thanks
@360_outdoors42 жыл бұрын
Great info. Pretty neat that your in the same area as I am. Hope to see you out on the local lakes one day!
@garywood84492 жыл бұрын
Great illustrations!Thanks
@drmarine17712 жыл бұрын
Mate great video. i just got this unit. very well explained. thank you.
@essetheedge90232 жыл бұрын
Thank you very much. You are helping us a lot 👍
@Gumby19782 жыл бұрын
This is the best training video that I have watched. Thank you for sharing your time and expertise.
@roxytiffe Жыл бұрын
Fantastic video! Thank you!
@dannyrowlett60232 жыл бұрын
Great video, really appreciate it. Liked and subscribed. Thanks!
@LivingstonFishing2 жыл бұрын
Great video! Super thorough!
@dshep8326 күн бұрын
Good information and thanks for sharing. Do you need to turn the simulator off when you’re actually using the device on the water?
@ETStravelman2 жыл бұрын
Thanks for the information
@larryd.collins79962 жыл бұрын
This was Awesome!
@XxJalelxX2 жыл бұрын
When is part 2 coming out, this is so helpful. Thinking of getting this unit for my kayak.
@nightanddaymarine88232 жыл бұрын
I'm hoping I'll have it out soon. Iv been super busy lately making similar videos for the company I work for an havnt had time lately but I plan on getting it out soon!
@timberryman7408 Жыл бұрын
Great video Thank you
@philipbarrett69533 жыл бұрын
Excellent. Training. Can you put FishReveal on the split screen?
@nightanddaymarine88233 жыл бұрын
Yes you can.
@kkutube1972 Жыл бұрын
Thank you.
@ar003ri Жыл бұрын
you have to have a transducer is able to exempt down scan.
@claire39452 жыл бұрын
Do you have 2nd ideo out yet? This one was very informative. Just need more instruction.
@nightanddaymarine88232 жыл бұрын
Yes I just put out pt.2 today
@gerrygrigg36243 жыл бұрын
I have a hooks 7 HDI is there any way to keep the structure scan on because when I turn unit off the structure scan turns off. Your vids are really helpful keep them coming. Thanks
@nightanddaymarine88233 жыл бұрын
I am not sure if I am understanding your question correctly. When you power off the display, it powers everything off. Unless you mean the structurescan turns off everytime you turn it off and then back on?
@gerrygrigg36243 жыл бұрын
@@nightanddaymarine8823 The structure scan turns off and you have to go back through the menu to turn it back on. Thanks for your reply
@nightanddaymarine88233 жыл бұрын
@@gerrygrigg3624 The only reason I can think of as to why it might be doing that is if the transducer plug isnt making a good connection. You might try to see if you can push it in further. Also, does it say anything about not detecting the transducer when you first turn it on? And what software version do you have?
@gerrygrigg36243 жыл бұрын
@@nightanddaymarine8823 Software version is 20.0 .I have a friend and his does the same thing . When I turn the depth finder on I have to go to settings then systems then to advanced then to features then to structure scan to turn it on. And it doesn't say anything about not detecting transducer. thanks
@geauxoutdoors2 жыл бұрын
If you want one of these at the console and one at the bow what is needed to make the way points show up on both? Thx and great videos. I hit subscribe 👍
@nightanddaymarine88232 жыл бұрын
You will want an ethernet cable which plugs into the yellowish orange port on the back of the display
@MrWhiltetail Жыл бұрын
You need to make Structure Mao & Genesis video's!
@MrWrestler41 Жыл бұрын
Good info, I am having my boat delivered on Tuesday evening and got the Elite FS with active target on front and HDS live at drivers console. I noticed by your coordinates your are close to me in Owasso. Would you be willing to come over and help me learn these fishing units?
@alpayziyansiz2506 Жыл бұрын
hi...will you make a video on installing external map card?
@Bustups3 жыл бұрын
Hi. I recently purchased one of theses units eliteFs 9. I Run two units on my boat HDS 7 live, I net worked the elite FS 9 to my HDS 7. I was very disappointed with the elite FS 9 as compared to the HDS live 7. the picture was allot more clear and brighter on the HDS7, I made adjustments to the elite played around with contrast ect to try and get a clear picture as to what the HDS 7 displayed and just could not. I ran the transducer alone on the eliteFS 9 and made no difference. All so with the elite FS mod the picture displayed allot of glare and was hard to see. I soon rather discover that the screens are different with the eliteFs compared to the HDS lives. I returned the elite back to the shop and Purchased the HDS 9 live with given it was the much better unit compared to the elite Fs
@meoldmateblue2 жыл бұрын
I guess you pay for what you get. Did you consider networking a iPad to the FS9 and utilising the quality screen? I’m also curious to know, are there any other features that stand out on the HDS7 worthy of paying double the price? Thanks in advanced.
@ia6980 Жыл бұрын
Can you please clarify why older hook reveal has better transducer than new elite fs?? Hook reveal with hdi transducer 50/200khz, will perform better in the deep waters because of its 50 khz, vs elite fs 7, .. does the 3-1 transducer on elite fs read 50khz?? frequencies
@ryonwilson59972 жыл бұрын
Fs units have cmaps live if you log sonar they automatically make maps
@nightanddaymarine88232 жыл бұрын
It's actually called Genesis Live. All the newer Lowrance models have it now.
@rem1giju54 ай бұрын
Hi, I'm thinking to buy Lowrence elite 9fs, it's good device for saltwater ? Let's say i will use 50/50 fresh and salt water.If for saltwater not good, then what you can recommend? Thanks
@PopPopJoe Жыл бұрын
Seems like some of the settings are slightly different on the 9 ?? Why
@johnkirby89002 жыл бұрын
Any update on how long to Pt 2?
@randyjones13112 жыл бұрын
How do I add the trip page as one of my short or long press button? Great video thanks
@nightanddaymarine88232 жыл бұрын
Unfortunately I don't think that is one of the options to pick from in the list. That display only allows you to pick from the options listed. It won't allow you to customize the list to add your own shortcuts.
@twotallable Жыл бұрын
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzfaq.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
@joshparry2867 Жыл бұрын
If I run a 3in1 transducer I don’t get the option to use 800hz for down scan ?? Is that true ??
@rjguess2 жыл бұрын
When I click on livesight my unit says “no source”. Why is that? I have the elite 7 FS
@christopherhobby83912 жыл бұрын
Thank you for this tutorial. But I couldn’t get the simulating effect on down scan and side scan. Wonder if it’s b/c I didn’t have my transducer plugged in?
@nightanddaymarine88232 жыл бұрын
Did you activate it within the files menu just under the simulator option?
@nightanddaymarine88232 жыл бұрын
Actually I think it's supposed to activate with the sonar simulator. I'll check on it here in a bit.
@christopherhobby83912 жыл бұрын
@@nightanddaymarine8823 I had to turn “stop sonar” off to get those to come on.
@ar003ri5 ай бұрын
I have Elite 9FS I haven't used it much at all. I will be using it in lake havasu. I installed a cmap for it. Question are these pre-loaded with maps.
@nightanddaymarine88235 ай бұрын
Yes they do come preloaded with US based C-maps. But not the HD maps that will give u satellite imagery or 3D shaded Relief mapping
@alpayziyansiz2506 Жыл бұрын
Do we need to exit the simulator retail mode when we are going to install our device for the first time?
@nightanddaymarine8823 Жыл бұрын
It depends. The retail mode isn't always on when you first power it up. I've seen in a few circumstances where it was but generally it is something you would have to manually turn on. Of course if it is on, you definitely want to turn it off. Retail mode will prevent you from being able to save your settings.
@alpayziyansiz2506 Жыл бұрын
@@nightanddaymarine8823 thank you very much i will try
@FedericoSalvestroni2 жыл бұрын
Thanks alot. I'd like to know if it's possible to mark waypoints in sidescan view.
@nightanddaymarine88232 жыл бұрын
Yes you can. Just tap on the screen where you want to put the waypoint and you should then see a waypoint option on the menu bar on the right side of the screen to set one.
@FedericoSalvestroni2 жыл бұрын
@@nightanddaymarine8823 Oh, thank you very much for you response. I was evaluating the purchase of EliteFS and this would be fundamental for me. Do You know if also "Hook reveal" support marking waypoints from sidescan view?
@curtisvincent4104 Жыл бұрын
I just bought a boat with this Lowrance unit. I took it to Shawnee Twin lakes to treat out the boat and the Lowrance unit didn’t recognize that Lake was even there. Any suggestions?
@nightanddaymarine8823 Жыл бұрын
Try going to genesismaps.com and see if they have a version of that lake that is covered. All the map files are free.
@MasterSly53 Жыл бұрын
Silly Question. With a Lowrance Elite FS 9 how do you go from way point 27 to waypoint number 1. Everyone shows how to set waypoints but not how to get to a waypoint previously marked. Example, I want to mark a boat launch and then at the end of the day be able to find and go to that boat launch again, how do I do that? Love your site and am a subscriber. Thx for the great videos
@nightanddaymarine8823 Жыл бұрын
There is probably an easier way to do this but since I don't have my unit in front of me, one way is to press your Pages button, then the settings icon in the top left corner, then Charts, then Waypoints, routes, and Trails at the bottom. You will then see your waypoint list. Select the waypoint you want and then select GoTo. Or when your on your chart screen you can scroll over to the eaypoint you want to go to ir ypu know where it's at, tap on it, and then on the menu on the right select GoTo. It will draw a line from you to that spot.
@joonasviinanen7276 Жыл бұрын
I installed a lowrance elite fs 7 sonar to my boat and my side scan is only showing 1 meter to the sides. Any advice on repair? Is there something wrong with the settings?
@nightanddaymarine8823 Жыл бұрын
What happens when you try to zoom it out?
@Reining_Fish Жыл бұрын
might be a silly question, but did you mount the transducer inside the hull of the boat?
@nightanddaymarine8823 Жыл бұрын
@@Reining_Fish no its on the transom. Structure scan transducers cannot be mounted in hull.
@joeyguyton7992 жыл бұрын
Can I change colors for the different depths on the mapping system that comes preinstalled with this unit or if I purchase Navionics? If so, how?
@nightanddaymarine88232 жыл бұрын
It does have that ability but you have to use a Cmap Insight HD card in order to activate that feature.
@manuelsegura9253 Жыл бұрын
Can I set this unit up in my living room by hooking up a power source
@nightanddaymarine8823 Жыл бұрын
You sure can
@tonyaultman1257 Жыл бұрын
Can you have Navionics and C-Maps at the same time?
@nightanddaymarine8823 Жыл бұрын
You can't run them at the same time. The display has 2 different modes to run mapping, either Lowrance or the Navionics mode.
@Tylerhoward22 жыл бұрын
Does this product have active target ready if purchased separately?
@nightanddaymarine88232 жыл бұрын
Yes it does.
@christophersavant22192 жыл бұрын
Do you need a separate transducer to get side scan imaging?
@nightanddaymarine88232 жыл бұрын
Possibly. It depends on which transducer you get with it. Generally it comes with the 3n1 AI transducer that does sonar, downscan, and sidescan.
@waheck2 жыл бұрын
I can't get the simulation mode to operate at all. I talked with the manager of the electronics dept. at the local fishing store where I bought it and he told me that he has never been able to get that to work either. He also said that it is a lowrance update issue (or something) Kinda wondering who's talking the truth.
@nightanddaymarine88232 жыл бұрын
So when you activate the simulation, and you select the specific simulation files, it does show anything on any of the screens? Like the sonar or structure scan? Have you made sure that your Stop Sonar is not turned on?
@tylervandenberghe81982 жыл бұрын
I am currently dealing with the exact same issue.. I have also activated/deactivated StopSonar. Have you found any solution yet?
@yak_abe2 жыл бұрын
I purchased one a week ago, can't get it to show contour lines, I also can't use high Chirp on sonar and have down scan or side scan while high Chirp is enabled. Any idea what's going on?
@nightanddaymarine88232 жыл бұрын
That is odd. I would do a soft or hard reset on it and see if that cures it might just be a glitch. For the contour lines, it could just not have mapping for that specific area. But if it doesn't show then at all... reset. Might even make sure u have the latest software update as well.
@FeldwebelWolfenstool2 жыл бұрын
..another FS instructional video indicated that the processor in the FS isn't snappy enough to run High C, DS and SS simultaneously.
@calypsoildir Жыл бұрын
Down scan and sonar doesnt work same time why ??
@nightanddaymarine8823 Жыл бұрын
You will have to turn off the chiro sonar and set it to 200 khz instead. For some reason on these they cannot operate at the same time.
@jeremywatts710 Жыл бұрын
How do you get fish reveal? On the same screen it’s showing me Fish 🐟🐠 ID but it’s not popping up fish reveal.
@nightanddaymarine8823 Жыл бұрын
Well the fish reveal only shows up on your downscan screen. Is it not showing the fish on that screen?
@jeremywatts710 Жыл бұрын
@@nightanddaymarine8823 shoot yea…I was trying to do it on sonar! Thanks for the help.
@justinschmidt918011 ай бұрын
Why doesnt the gps work
@nightanddaymarine882311 ай бұрын
GPS should connect automatically as long as your outside or close to outside. Are you getting a ? On top of your cursor arrow?
@justinschmidt918011 ай бұрын
@nightanddaymarine8823 i get a little bell, and it beeps . Im 8ft from the door . I bought it a week ago
@nightanddaymarine882311 ай бұрын
@@justinschmidt9180 watch part 2 of this video and around 28:00 there are some steps to make sure the GPS is activated. If that all checks out then you might just have a faulty GPS module.
@TheTroutman85 Жыл бұрын
I can’t get my speed to read. Any feedback would be appreciated
@nightanddaymarine8823 Жыл бұрын
Are you picking up a GPS signal? Like does it show you moving around on the chart? And you do have the speed overlay set up? Not the water speed?
@TheTroutman85 Жыл бұрын
@@nightanddaymarine8823 how do I setup my speed overlay? I’m having GPS signal and set up speed through water
@nightanddaymarine8823 Жыл бұрын
@@TheTroutman85 in the video I show how to add an overlay and under the GPS options at the top, make sure to select Speed Over Ground once your in the Edit Overlay/Add screen. And then Save
@TheTroutman85 Жыл бұрын
@@nightanddaymarine8823 I’ll try it out! Thanks again
@mac26452 жыл бұрын
Does the elite fs 7 have the active target
@nightanddaymarine88232 жыл бұрын
Yes it does
@mac26452 жыл бұрын
@@nightanddaymarine8823 Does it come with it or does it have to be bought separate and just works with the elite fs 7.
@nightanddaymarine88232 жыл бұрын
@@mac2645 it comes seperate. I think their might be a bundle kit that you can buy that comes with the display and active target equipment but thats it. It definitely requires additional equipment to use that feature.
@robertjchavarria2 жыл бұрын
great video, way too many ads.. Thanks for the info though!
@nightanddaymarine88232 жыл бұрын
How many ads did it show you? KZfaq automatically puts them in
@oijamecoco13982 жыл бұрын
Can this read 300 meter?
@oijamecoco13982 жыл бұрын
Depth?
@nightanddaymarine88232 жыл бұрын
Kind of depends on what transducer you are using and in what type of water you are in. Technically it can but it depends...
@wayneking59852 жыл бұрын
Which tutorials apply to Hook 4xGPS? I have no idea how to use it. Even have trouble turning it on and off.
@nightanddaymarine88232 жыл бұрын
I don't think I have any posted yet for that one specifically, however I do have videos made for that one. I just havnt put them on KZfaq yet. If you subscribe and hit the Bell icon, it will let you know when I get them uploaded.
@user-tg7yj5lq1u2 жыл бұрын
Can I change the language to Japanese? Japanese=日本語
@nightanddaymarine88232 жыл бұрын
I will have to check but it depends on which language pack is preloaded into the display.
@user-tg7yj5lq1u2 жыл бұрын
@@nightanddaymarine8823 Thanks for the reply The Japanese regular version is very expensive and cannot be bought. If you can choose Japanese, I'm thinking of ordering from the United States.
@nightanddaymarine88232 жыл бұрын
I gotcha. That makes sense. However, keep in mind, if you buy from the US, it will not have any mapping on it for Japan or anywhere else besides the US. So you will need to purchase a mapping card for your area so keep that additional cost in mind. Also, you should be able to call Navico and see if you can get the language pack sent to you. It's just a file that you can easily install on the display. But I am unsure what their rules are concerning that now.
@user-tg7yj5lq1u2 жыл бұрын
@@nightanddaymarine8823 Thanks for the detailed explanation. I found out that the Japanese dealer will not repair it if it breaks down. I will buy an expensive product made in Japan. Thank you very much.
@mikesmith633919 күн бұрын
Their response service sucks
@pernamore42242 жыл бұрын
So this wouldn't be good for the salt?
@nightanddaymarine88232 жыл бұрын
It could be. Depends on the body of water and what transducer you are using.
@bethcaron1466 Жыл бұрын
Can't see anything
@bethcaron1466 Жыл бұрын
I have a dark screen!!!
@jeffrankin4234 Жыл бұрын
way too fast have to replay 100 times --SLOW DOWN!