The absolute best video ive come across on these units, i was truely going to smash it, until i found you, thankyou

I think most of us are utilizing less than 5% of of these units capabilities! It sure is nice to explore in-depth and customize for our personal preferences. Before watching, I pretty much accepted the factory settings and just got used to them. Now I will take the knowledge gained after watching your video and apply many of the lessons learned. Thank you for your simple, easy to follow instruction. For me, it made all the difference. I look forward to watching more.

This is by far the best tutorial I have come across. After following the tutorial feel a lot more confident with the set up up my Lowrance TI Elite and looking forward to trying it out from my kayak in the sea off the NE UK. Keep up the good work, Thanks.

Thank you sir for an outstanding to the point tutorial. I have searched many times and finally foud exactly what I need .

Excellent. You took the time to explain how to get to each option. I set the TI2 next to the video and went through the options while watching the video. Some videos tell you how to set the option but not how to get to the option. You showed which buttons to push and what each option was and you were excellent showing how to setup the screen. Thank you for this video.

I agree, best video on this unit! I've read a lot but using this unit it's easier to learn by watching someone go through and explain it. Thanks

So much great n needed info for me n my new Ti 2 . Thank you for pointing me in all the right directions.

Thank you from Down under Australia we have two of these units and you have just opened up a whole new world of better understanding the options and features available with these units.

Absolutely the best explanation of how this fish finder is set up. Some of older guys and gals need it explained in detail. We aren’t tech savvy as younger people. Thank you.

Thank you so much for this video. Just purchased an Elite TI2, and will use this to set it up

Thank you I agree with all the other comments. Your video is the best ever. I could have never figured out how to really use my unit. Please keep up the great work..."you the man"!!!

I found a lot of good information in the first few minutes of your video. Awesome job! Can't wait to program my unit!

Ive watched this multiple times. Finally understand how to setup the unit. The thing I always missed was touching the power button to get into the edit overlay. Thanks

Without a doubt, The best tutorial I have ever seen on setting up . I have just purchased this unit and you have made my setup very easy.

Best video I have watched on setting up lowrance. Great great great. He makes it very interesting and simple. Thank you

You're my new favorite on KZfaq. I learned a lot watching your vids even though my unit is not exactly the one you're showing. It's close enough to where I picked up quite a few new tricks! Great job keep up the good work!

WONDERFUL!!! was giving this $hit unit away!! I have fought this thing for quite a few years. (NO unit for old men) Will keep it now for the bow. THANK YOU SO MUCH FOR THE BEST VIDEO EVER ON THIS UNIT!!

Wow! I definitely learned a lot about my fish finder's capabilities! Thanks for posting this. Hopefully, I will put it to good use this weekend.

Excellent video!! As a Lowrance user I really appreciate the easy to follow instructions and help setting up my units. Thank you!

You are the very best teacher I have ever seen! Thank you so much for this video! I have done it wrong the last 20 years! Thank you!

I have watched this video four times now and I keep learning new things.

This is by far the best video made on any fish finder!! So glad this is the unit I have!! Lol thank you!!

Excellent well-guided detail seminar on how to use this great boating and fishing tool.

This is hands down the best video I’ve seen. Thanks so much

What a great video for an older guy like me!!! Fantastic job!!

These tutorials are great! Thanks for coming to our fishing club meeting tonight to provide some electronics insights.

Huge help ! Had my unit 3 years and learned alot now ! Ty

Very helpful content! Thanks for sharing.

Best one I have seen yet!!!

Just watched again for second time. For a guy that thought I knew my fishfinders you sir showed me alot. Much Respect. I will be viewing your store site. Thanks again

Thank you so very much. Incredibly helpful!

Wow. Very good explaining

Super good training video training for lowrance top units.

Outstanding video. Many thanks to you both.

Thx for the great work explaining everything your a legend like the guy below was ready to throw it in the ocean !!

Cheers mate, this was awesome.

Just installed one in my boat today. Great setup video!!

Oh my!! Thank you!!! My boat is out for routine maintenance and I'm using tnis tomorrow!!

Spectacular!

Very good instructional video. Thank you very much

THIS IS A FANTASTIC VIDEO.

This really is a good video . Thank you

Finally, a guy who knows what he’s talking about and isn’t wasting time. Lowrance should hire you for their webinars!

I just wanted to thank you guys for amazing video which is very helpful 😉🤙

Excellent instruction!

Wow! Best ever. Thanks

absolutely great video guys

Thank you, Im ready to pull the trigger on one.

Awesome

Thank you so much!

Beautiful job…thank you

Great video thank you

Awesome info

Great video! You guys did a great job! Thanks. Why is it that Lowrance doesn't (can't?/won't?) do application videos this good? Nice work!

I will be wearing this video out

Great job

Great Video Tutorial

Great video mate

No wonder I didn’t see any fish. Thanks for tutorial now I can see more

The Best 👍i don’t speek Englisch but your video help my! Danke 👍

Best Ti video ever

You guys are awesome

Thanks!

Life saver thanks bro

thanks for sharing some useful features and... having a nice dog... I have just boght this fishinder and I have two geat danes

Excellent video especially for dumby like me 👍

Fantastic video and information, will use this to get my TI 2's up and running! Looking forward to a navionics shading tutorial.

Solid I guess my Ti2 was just looking pretty the whole time

Awesome video on setting up the Lowrance elite series. I learned a lot from it and I've been using the elite ti and since it came out and now have the ti2. I'm saving this video for future reference. Thanks for the info!!

Amazing video!

Great video. Best one I've watched. I wish I had the silver tags on my transducer cables but they had been removed before I bought the boat. Two HDS7 Gen2 Touch units (bow and console) and one Elite Ti (stern). Four transducers. Not sure which is hooked to which except the Spotlight transducer that is hooked to the bow HDS7 and does have the silver tag.

Great video as always but my question is I run 3 Elite Ti2 units 1 at the bow and 2 at the console. 1 unit is not hooked to a transducer because it’s just used for mapping my other unit has a splitter so my unit can use the through hull transducer and use the 2 in 1 so which transducer do I choose in the installation segment ?

Yep 👍

Great video! I have the Elite Ti2-12 and purchased a C-Map Reveal card. Have a hard time understanding the setup. Do you have a video for that? Any help would be greatly appreciated. Thank you

I just bought a used boat that I will pick up tomorrow. It has two elite ti2 graphs already on it. I am sure you video just saved me several hours of learning the menus and setting it up for the first time. Thank you.

I have an elite ti2 with AI 2in1 Ducer on the transom I use for down and side scan and also an hdi Ducer shooting through hull for 2D sonar. Is it correct to just select the AI 2in 1 Ducer in the installation settings? Thanks

Great job I can’t get contour lines to show up on my lowrance elite ti 9 on my navionics tried updating card that didn’t work any advice thanks

Excellent video! Thanks for the detail and the "why's" for changes. What is the benefit of Sonar versus Downscan?

Thank you thank you thank you! I think you gave me the info I need to get what I want for the money I have available but I have a few questions just to make sure... but first let me tell you the back story.... I'm new to fish finders and I've already purchased a few used Lowrance products but I've gotten confused with transducer and networking compatibility issues. I ended up with an HDS 7 gen2 touch at the helm but didn't get maps or the side scan transducer so it only has 2D sonar. Then a friend gave me an elite 7ti for the deck but networking is an issue. However I did get the down scan transducer that I mounted to my trolling motor so I split that with the 2D which is great. So now I just purchased an Elite 9 Ti2 with the Active Imaging 3 in 1 transducer for the helm so I can have side/down/2D. Now here comes my questions... 1. Can the 7ti and the 9Ti2 network wirelessly? 2. Should I get the navionics card? (I live in Oxnard CA so I mostly fish on Lake Casitas and I also fish in CA and AZ. Again... great video... I feel like I have my head screwed on straight graph-wise with all the tips and I really think this will help me catch more fish so thanks.

What do you recommend to improve image quality on these units in shallower waters? Sometimes, even as shallow as 10ft, my graph will get fuzzy for down and side imaging and it’s hard to read. Thanks in advance.

great video got one question for you i accidently erase my wireless client setting letters which is located in the wireless setting box it shows now no setting for wireless client, mode have been stored how do i reset or get the setting back.........

Great video! I’m following along and rechecking everything as I’ve been using it for a year now. My transducer selection is set to AI1 3 in 1 but my transducer is a AI2 3in1 and it won’t let me bring up the available transducer list. Is there a difference between ai1 and ai2?

This how to video is the absolute best! I've had my Elite 9Ti's for three years and have never gotten a handle on them. I have 3 questions. First, why don't you overlay water temp on any of the screens? Second, where do I find the video for updating via wifi? And, finally, if you have two units, as I do, with one at the console and one at the bow, how would you set up your bow unit?

If only apple made fish finders, they’d be way expensive tho. I just got the elite 5ti and man this video would have helped a lot. I was in 180ft of water and it was saying it was 10-20ft deep😂

Is there anyway you can get downscan on a 9ti or do you have to have a 9ti2?

Good video. My Lowrance Ti2-7 is showing speed in KPH. How do I change it to MPH?

Great video... it helped me setup my lowrance's. Question, should it be speed over the water instead of speed over ground?

Hi I have just bought DHS live 9 And I'll put a one kW Tm275Lhw I would like a few tips on how to set it up for deep water

Is the transducer you talk about with 3 in 1 the active imaging transducer and you select total scan mh?

Two questions. I recently purchased an Elite 9 ti2. I've had it in the water a couple of time to play with it. First, can I add contour depth lines? My lake is showing a contour line of 8 feet and that is it. I'd like one foot contour lines. Secondly, I have a Navionics card in my older Elite HDI. Navionics support says it will work with my ti2. But, I can not seem to get it to recognize it.

I have the 9TI and my base unit was just replaced under warranty I have the M/H transducer but don't seem to I believe the downscan. I have sonar and side but no downscan icon? Any ideas? Nevermind I figured out why I had 4 setup screens. two of them were the downscan just with different settings. But I only have 9 pallet color choices not 14 or more like you have. Just interesting how all of these are just a little different.

Hi again im getting my unit sorted thanks to this video, now one thing im having problems with is I bought my unit in New Zealand but i found out the unit was not made for the new zealand market, so i got back to the supplier and to solve the problem he supplied a c map micro sd to put into my unit. So now i have to run the unit with the sd card in it all time that means if i want to install c map reveal i cant because of the sd slot being used for my maps. I believe i was sold the wrong unit in the first place (wrong country) and was just given a map card as an easy fix for the agent, am i right in thinking this?

Any idea why my chart is now tracking my course with a big shaded area around the cursor? I have tried all kinds of settings and I can't seem to get rid of it.

How do i change my trail data points? When i am going slow in my boat the trail thickens and i cannot see where i am. When trying to position the boat over a reef. It feels like there should be a way of reducing the number of data points the unit is capturing... I have a video

Hi there, as I suspected i just hand nobody to ask around here, it seems to be the case that once you buy a unit to try to find out any information on it its so hard, if i take the card out of the unit it does not run as it should, i have a friend with a unit the same as as mine a ti2,and we have been shearing what we know between ourselves and it turns out he can run his unit without the card inserted in the unit. Have i been sold the wrong unit for my country? Regards Paul

I connected 2 transducers to this unit via a Y cable. My thinking was that i can utilize the 3-1 (which is what i bought extra) for the side scan, and the other skimmer type for the "at-speed" downscan. Is this something that works on the TI-2. Trying to learn about this. The previous owner had a side-scan ducer and mounted the skimmer to the trolling motor. Maybe he was not honest about weather this worked for him or not...

How do I get the contour lines to show up on my Lowrance TI chart

Is this the same for elite ti 7 on the edit overlay? I lost my my speed and depth last year and haven't been able to get it back.

How do you get that bar off the left side of the screen that says trolling and other stuff

Hi guys my edit overlay button doesn’t let me in to add anything