Winter Weathering With Snow Effects! (KV-2, Tamiya 1/48)

  Рет қаралды 82,724

Night Shift

Night Shift

Жыл бұрын

My friends, weathering winter tanks is usually easy, rewarding, and fun. Especially when the setting is full of mud as the white camouflage nicely contrasts with the dark, damp earth tones. But things get tricky when we want to implement snow into the weathering!
Patreon: / nightshiftmodeller
Visit and register at www.michtoy.com/ and use the promo code "myfriends2022" to get 15% off your orders!
Enjoying this type of content? Well, if you're new here, then don't be shy to subscribe and maybe even turn on notifications because I keep posting stuff like this every week!
Disclaimer: Most of the weathering products I use in my videos such as Ammo by Mig Jimenez, AK-Interactive, Wilder and VMS were sent to me for free, but with no obligations to promote them. I received a lot of them a long time ago, even before I started this channel. VMS is also one of my Patreon supporters. Being independent from big and exclusive sponsorship deals and showing you a wide variety of different brands and products was one of the founding ideas of this channel and I will always stand by this.
Music: Quincas Moreira - Scratch the Itch - KZfaq Audio Library

Пікірлер: 138
@justinlafever5653
@justinlafever5653 Жыл бұрын
The *ONLY* critique I would have to give (and it’s my very first out of 3 years of following the greatest modeler of all-time), is the dryness of the tank overall just doesn’t seem to fit the wetness of the tracks and running gear. Might I suggest splattering some clear varnish in specific areas of the hull to simulate snow flung onto it from the tracks, and has since melted and run down the side of the hull? It would probably take away the overall dryness look of the tank. Or even perhaps the whole tank? Since, after all, snow is nothing more than rain that’s temporarily frozen.
@bujisus5068
@bujisus5068 Жыл бұрын
It’s always good to see a Nightshift video when it comes out
@cliffherring7006
@cliffherring7006 Жыл бұрын
Friday isn't Friday until you here "My friends".
@Modkits131
@Modkits131 Жыл бұрын
What a perfect treat for Veterans/Remembrance day. Also that is one glorious looking KV-2. Thank you Nightshift
@HAYAOLEONE
@HAYAOLEONE Жыл бұрын
Eternal glory to gulags!
@Sorcou
@Sorcou Жыл бұрын
""This are the best results I can get with materials I have" I'm gonna print it out, frame it and put it on my desk to not get depressed looking at my models XD
@wi-fi3231
@wi-fi3231 Жыл бұрын
Like usual, Fridays are the best days, because Night Shift posts and simply the fact that it’s Friday! Love your work and videos!
@jacobakana5649
@jacobakana5649 Жыл бұрын
You have become a master of making white paint look anything other than white, and it makes for a really cool weathering job! I am loving this series, this will be a great finished scene!
@zentoa
@zentoa Жыл бұрын
Looks amazing plus 9:32 pls don't rush it I don't care if it takes longer for a video, we want to see your best work and something your 101% happy with :)
@gamedude412
@gamedude412 Жыл бұрын
Snow effect on tanks is so much fun. My BOB Sherman was covered with snow on its front. The most terrifying process of the build
@gunnarsoderhielm3425
@gunnarsoderhielm3425 Жыл бұрын
Man, just earlier today I was contemplating wether or not to wait for this video, before weathering a snowy CV90-40. I decided to go for it myself and just as I'm finished this video pops up. Still, will be interesting to compare my methods and results to yours and perhaps I'll add something in post.
@NZobservatory
@NZobservatory Жыл бұрын
I still enjoy the construction phase at least as much as the painting and weathering.
@rfletch62
@rfletch62 Жыл бұрын
This is clearly the Golden Age for modelers. In the '70'-'90s snow was tough to pull off. Now it comes in a bottle. Likewise with smoke, fire, and explosions!
@welshzecorgi7903
@welshzecorgi7903 Жыл бұрын
Good to see Comrade Chonk get some love.
@dogforeyals
@dogforeyals Жыл бұрын
When I was younger Friday means fun now it's happiness...:)
@mellerby6049
@mellerby6049 Жыл бұрын
I love u man. Your KZfaq has changed the way I see models. Also I seem like a genuin guy who also wants to learn more. But honestly I are such a great modeler\painter. Thank you
@jdawwwgytb
@jdawwwgytb Жыл бұрын
Derp Cannon Activated 👏🏾👏🏾👏🏾
@SPSteve
@SPSteve Жыл бұрын
Beautiful paint work, Martin! Thanks for sharing and demonstrating your techniques, they are very inspirational!
@kennethmurphy8585
@kennethmurphy8585 Жыл бұрын
Your talent is superior, and so much eff’n fun to watch and sooo worth waiting for. My wife and I anticipate watching everything you make. Cheers!
@BombshellCreations
@BombshellCreations Жыл бұрын
That looks amazing, so far. I think this is one of my favorites you've done so far.
@jonL88
@jonL88 Жыл бұрын
Great comrade, he coming for the motherland
@Simoncressey99
@Simoncressey99 Жыл бұрын
Here's a little tip if you add humbrol decalfix to any acrylic paint you can reactivate it with water. The decafix is crap for it's intended use. But as a medium for wearing pigments.
@casualmilsim2459
@casualmilsim2459 Жыл бұрын
"Quick, relaxing project!" 😁Looks awesome for a "Rush job"
@nigelsmith7366
@nigelsmith7366 Жыл бұрын
Try Tamiya acrylic flat base straight out of bottle to simulate frosted areas can be thinned for airbrushing.... Results in a very good looking frost effect
@americanpatriot2422
@americanpatriot2422 Жыл бұрын
Always an outstanding video and presentation.
@caikween6366
@caikween6366 Жыл бұрын
I'm not sure if this is a realistic diorama idea but while watching I thought of a tank "parked" outside a building with snow built up on and around it, and little Christmas lights hanging from the building. I'm not sure if anyone makes scale working lights like that but I think it'd make for an interesting picture.
@ScottKenny1978
@ScottKenny1978 Жыл бұрын
They do make pico LEDs, but they're usually something you need to wire up yourself.
@TitaniusAnglesmith
@TitaniusAnglesmith Жыл бұрын
I've always wanted to make a diorama with christmas lights or other small lights.
@stephenbridges2791
@stephenbridges2791 Жыл бұрын
Very nicely done. Started a Dragon Tiger II just today. What a great day it has been. Great content and new model. Don't get much better.
@thatonetanker1436
@thatonetanker1436 Жыл бұрын
Your models always look so great! I’ve been so impressed with every one of your models that it’s given me the confidence to actually upload some videos of my own models, I’d love it if I could get some feedback from a professional model maker like you perhaps. Anyways keep up the work my friend
@rwcowell
@rwcowell Жыл бұрын
You are my favorite model making channel. I enjoy your explanation and details as you progress with putting together the model, the techniques and products you apply, along with pros and cons that result. Most of all is your jovial attitude that you have while discussing everything step by step as you create your masterpieces. Cheers!
@apathtrampledbydeer8446
@apathtrampledbydeer8446 Жыл бұрын
It's funny, it looks like an overexaggerated meme-tank with that tall turret. Great weathering and painting, as always!
@VinBizz
@VinBizz Жыл бұрын
NightShift is the first reason of enjoying the friday evening
@diecast_MikeEspo
@diecast_MikeEspo Жыл бұрын
Great work as always. Tank is done so right . WOW . Mike
@ArmorStudioNYC
@ArmorStudioNYC Жыл бұрын
the weekly motivational video is here! than you uncle for all the tips and motivation! not only to keep modeling but enhance the skills
@robertoquiros4093
@robertoquiros4093 Жыл бұрын
My favorite Friday's snack hahaha
@Peteftm
@Peteftm Жыл бұрын
Proper easy on the ear listening 👍
@jonfoisy1237
@jonfoisy1237 Жыл бұрын
Precision Ice and Snow out of the UK makes the best model snow products. Hands down! Give them a shot. You won't be disappointed.
@danilo3552
@danilo3552 Жыл бұрын
its real intresting seeing a Kv-2 WIthout fenders.
@richardorta8960
@richardorta8960 Жыл бұрын
only missed the upload by 57 minutes today. I can watch it before work!
@user-Orpheas
@user-Orpheas Жыл бұрын
.....you are an artist my friend. Ewery think you do is an art... thank you.
@BigLisaFan
@BigLisaFan Жыл бұрын
Once again, outstanding. A true artist.
@larryscarafile7309
@larryscarafile7309 Жыл бұрын
The weathering effects look fantastic on this beast
@Oakeeper
@Oakeeper Жыл бұрын
Excellent as always!
@Rhinexing
@Rhinexing Жыл бұрын
Amazing work! It's so convincing that I feel like my hand would freeze to that that hull if I touched it.
@derylcolpaert5017
@derylcolpaert5017 Жыл бұрын
love these videos. great work, great explanations, very entertaining. I don't know what it is but listening to him is enjoyable. I've tried watching videos by some others and I couldn't stand the way they talked. Keep these awsome videos coming Night Shift
@ghostofkadesh9041
@ghostofkadesh9041 Жыл бұрын
Nice work, as always 😃👌👍
@gustaflekander718
@gustaflekander718 Жыл бұрын
Best moment on the week friday nights with night shift
@maximss27
@maximss27 Жыл бұрын
Breathtaking to watch...)
@deadpoollee9497
@deadpoollee9497 Жыл бұрын
You have been a great teacher I still suck but these video making me better
@mauserkk98
@mauserkk98 Жыл бұрын
Very impressive.
@SprueFascinationChannel
@SprueFascinationChannel Жыл бұрын
Excellent job 👌
@joshgibbs3337
@joshgibbs3337 Жыл бұрын
Your videos are the most educational and inspiring I’ve ever watched! You’ve truly helped up my game in the Modeling world with armour! Also can we get a shirt that says Muh Friends on the back lol would deff buy!
@Plantagenaut
@Plantagenaut Жыл бұрын
You did a wonderful job!
@gruppenfuhrer45
@gruppenfuhrer45 Жыл бұрын
Martin you’re truly amazing sir!!!!! 😊
@podmuz
@podmuz Жыл бұрын
Awesome as usual!
@daspanzer135
@daspanzer135 Жыл бұрын
It's veterans day, no school and a perfect Night Shift video!
@fherreracabrera
@fherreracabrera Жыл бұрын
You are the MASTER NSh!
@XxBloggs
@XxBloggs Жыл бұрын
Excellent
@fabricedevos4273
@fabricedevos4273 Жыл бұрын
incredible! 👍🏻
@pattygman4675
@pattygman4675 Жыл бұрын
Soda bi-carb or talcum power mixed with diluted PVA glue can make a decent snow effect.
@biberhunter_scale_models
@biberhunter_scale_models Жыл бұрын
Looking forward to your figure painting in 1/48👌😁
@JedenSiedemDwa
@JedenSiedemDwa Жыл бұрын
What I can wrote to say more than always? Great done! All the best for You! ;)
@tankmodeller1982
@tankmodeller1982 Жыл бұрын
Another great work¡¡
@towarzyszczajnik243
@towarzyszczajnik243 Жыл бұрын
I was allways thinking you are saying mud friends now my friend
@THROTTLEPOWER
@THROTTLEPOWER Жыл бұрын
❄❄Another GREAT vid ❄❄
@billmoore3779
@billmoore3779 Жыл бұрын
Awesome work Myyyyyfriend!! P.S. you need you make T Shirt with that on it!
@erickirwan8703
@erickirwan8703 Жыл бұрын
Excellent work. Really enjoyed this series of videos because I love winter camo. Thank you👍
@seegurke93
@seegurke93 Жыл бұрын
My Friends! I always hear "Mud Friends" until you said my friends recently in another sentence :D
@CetoFreakingKaiba
@CetoFreakingKaiba Жыл бұрын
i have tried a couple of those acrylic pastes from AK but I can't get them to work standalone. When applied they look very good, but first there is the problem with the tide marks you mention, but I also found that there is very significant volume reduction, so you cannot just apply a little, without ugly grains showing. What I tried and it seems to work, is add straight to the bottle a bit of fine sand or dust (must be quite fine), to give it a more predictable volume comparison between dry and wet. I also added some fine grass but that isn't necessary
@orfeo787
@orfeo787 Жыл бұрын
So nice! I would love to see how would you do one of the World War Toons tank Models!
@ziyorge1280
@ziyorge1280 Жыл бұрын
Very cool)
@carloshnunez
@carloshnunez Жыл бұрын
Great job like always 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
@ScottKenny1978
@ScottKenny1978 Жыл бұрын
Wish this was available as a skin in WarThunder or World of Tanks... The KV2 is always entertaining to watch derp and delete tanks.
@nao_tomori
@nao_tomori Жыл бұрын
im currently building a AFV Club Magach 6B. M60 with extra armor and more guns. Cool lil tanks
@guyk2260
@guyk2260 Жыл бұрын
Precision Snow and Ice 's Krycell and related projects best for snow / ice . Mafriend
@MANSEROK
@MANSEROK Жыл бұрын
Beautiful. Hello from Russia!
@TheZimmerit
@TheZimmerit Жыл бұрын
I hope we´ll see you one day building a Panther tank!
@peterwooldridge7285
@peterwooldridge7285 Жыл бұрын
Super
@former_moment10245
@former_moment10245 Жыл бұрын
Try a model with a visible interior. I think it would look dope
@antonrudenham3259
@antonrudenham3259 Жыл бұрын
Welds are actually often quite rusty, the only way that wouldn't be the case is if the welder was lucky enough to be using Stainless steel rods which are expensive and therefore rare in any Soviet vehicle. I get it that enhancing weld seams with silver paint brings out a result but you must understand that quite often a weld seam rusts very much like any other bare steel would.
@mattcreecy3475
@mattcreecy3475 Жыл бұрын
When welding rolled homogenous or face hardened armor steel you have to use a modified 18-8 stainless electrode to properly join the pieces. Some of the older armor welding methods involved a high nickel content electrode. A regular 6010/11 or 7018 won’t work on armor. The weld will actually split off from the joint like you used a caulking gun instead of a stinger.
@antonrudenham3259
@antonrudenham3259 Жыл бұрын
@@mattcreecy3475 OK, thanks for putting me right on that.
@jamiebmorton
@jamiebmorton Жыл бұрын
Absolutely stunning as always. It is so satisfying watching your videos. How is the shipping from Michtoy to Europe?
@nastynate4916
@nastynate4916 Жыл бұрын
While I can’t guarantee it’s as good as the products you’re using, anytime I need snow for tracks, I use a blend of baking soda, matte medium, and white paint and the amount of liquid to solid ratio I can adjust to make it runnier or pastier
@BetweenTheBorders
@BetweenTheBorders Жыл бұрын
My lens technique has become: Base color (often metallics) across the entire part, two lighter highlights on the bottom in a crescent shape, one dark crescent on the top opposite the highlights, and blend as desired. A single white (or very bright metal) dot as a reflection off the lens, then washes then gloss coats until the desired hue and reflectivity is acquired.
@richardorta8960
@richardorta8960 Жыл бұрын
Have you come across any interesting conversions of captured german vehicles in allied service? I think watching one of those being built would be neat.
@ScottKenny1978
@ScottKenny1978 Жыл бұрын
The best picture I have seen is a SdKfz251/1D that had been resprayed in the British OD (I forget the specific color code) and then had the back of the 'track used as a chalkboard for the O group briefing.
@pbyfr
@pbyfr Жыл бұрын
And another great model, always amazing result. Why do you not use some marker of Molotow Liquid Chrome instead of silver paint? It's much quicker to apply, and the results are a lot better.
@chumakov
@chumakov Жыл бұрын
I love your videos even though I have never made a model tank before, but I'd love to. Any tips of models and techniques for a total beginner?
@jenrodderhigh5059
@jenrodderhigh5059 Жыл бұрын
Hi… I Absolutely love your videos can you do a British desertized challenger 2 ?
@Blacksmith162
@Blacksmith162 Жыл бұрын
How impressed im am from 1-10 10/10
@AverageLatvianDude
@AverageLatvianDude Жыл бұрын
Nice job, man 🔥 but looking at the model I can see this one in not just Leningrad in ww2, but even modern day setting. Add some debris and this will look like it was sitting there for ages, ya know what I mean 😌
@Ivanov_397
@Ivanov_397 Жыл бұрын
You should do a S.T.A.L.K.E.R. diorama in the future.
@OpenShot23
@OpenShot23 Жыл бұрын
I need help, I was building a airfix B17 and basically I got to sticking the fuselage together and it went wrong, so my question is how/can you remove cement superglue. Any help would be really appreciated as I spent a lot of money on the build and the paints, Thanks
@wouter7779
@wouter7779 Жыл бұрын
The KV looks really nice! I also had an idea: Would it maybe be cool to finish the model which all started the channel (Nagmachon) for the 3rd anniversary of the channel?
@kiowafourty964
@kiowafourty964 Жыл бұрын
Hi night shift! Have you ever considered modeling an RC Tank with something like this?
@Duraltia
@Duraltia Жыл бұрын
Maybe a question you ( or anyone else ) can answer... On Airbrushes like the Tamiya ones ( Iwata / B.B. Rich? ) with a needle and different sizes like 0.3, 0.4, etc... What does the size refer to? Is it referring just the Nozzle ( the miniscule part the Needle goes through and makes contact with when fully closed ) or is it the Needle? If it is just the Needle does that mean Needles are standardized to one size and we can get any replacement? 🤔
@skilletgotpancakes
@skilletgotpancakes Жыл бұрын
Hey friend! Amazing job on these models. I'm in no shape or form an expert on painting, and am actually looking to expand my techniques and better myself with my model building and painting. Just a quick mention though, I noticed on your sprocket teeth how you chose to paint the silver worn effect on the entire tooth. As a prior service armor crewman I have to say that sprocket teeth tend to wear down at the edges first and the flat contact areas. chipping away at the metal to almost smooth out the edges of the teeth. for the entire tooth to become silver like that shows problems with track tension. What I like to do is highlight the edges and maybe bring them in a little bit, most armored vehicles even of an earlier period have what are called wear rings or wear indicators that allow the crew to note when a certain part should be replaced. Again, i am NOT a professional just speaking from my experience and witnessing how armored vehicles age and become rusty or used. I enjoyed the video and look forward to attempting these sort of things in upcoming projects!
@WillCalwell
@WillCalwell Жыл бұрын
I wish you would make a book.
@brainstorm8778
@brainstorm8778 8 ай бұрын
I love this. Do you remember the name of the font used for the stencil you made?
@barrymcockener2209
@barrymcockener2209 Жыл бұрын
You should try satellite city super solvent for ca glue. It puts that VMS shib to shame.
@50043211
@50043211 Жыл бұрын
Welds do not rust? Interesting!
@erwincoplo6305
@erwincoplo6305 Жыл бұрын
How many vids i watch, it stays chinese. Guess im not made for weathering. Im starting my first diorama for a diorama build off. I have ak wet mud, snow terrain, snow sprinkles and still water ... thanks to one of your vids but i cant get an idea how it need to look. Yeah, not made for diorama's too. 😅 Cant wait to see your diorama. Awesome work 👌
@lieutenanthobbies
@lieutenanthobbies Жыл бұрын
Can you do a simple tamiya kit with no pe for beginners
@nuek9612
@nuek9612 Жыл бұрын
will you ever do a tour of all the models you have made?
@arsenechongchengenmoe1548
@arsenechongchengenmoe1548 Жыл бұрын
nice model i wil build a LEGO VERSION 😅
"Heroes of Leningrad" 1/48 Winter Diorama
16:46
Night Shift
Рет қаралды 154 М.
Let's Paint A Heavy Soviet Winter Camouflage! (KV-2, Tamiya 1/48)
13:53
Finger Heart - Fancy Refill (Inside Out Animation)
00:30
FASH
Рет қаралды 25 МЛН
DEFINITELY NOT HAPPENING ON MY WATCH! 😒
00:12
Laro Benz
Рет қаралды 63 МЛН
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 21 МЛН
World’s Largest Jello Pool
01:00
Mark Rober
Рет қаралды 82 МЛН
Testar Dji Avata 2 fpvDrone
9:59
starfighter fornander
Рет қаралды 12
JS-2 Build With EXTREME Cast Steel Textures! (Tamiya 1/35)
21:52
Night Shift
Рет қаралды 172 М.
Destroying Lego Towers
15:48
Brick Technology
Рет қаралды 1 МЛН
Painting A Winter Panzer 38t For My Friend (Tamiya 1/48)
18:48
Night Shift
Рет қаралды 116 М.
Let's Paint An Old Toyota Land Cruiser! (AK-Interactive, 1/35)
15:24
Crazy German Tanks Size Comparison 3D
10:41
AmazingViz
Рет қаралды 16 МЛН
A Mechanics Nightmare, the Ferdinand | Cursed by Design
25:07
ConeOfArc
Рет қаралды 399 М.
Top 5 Weathering Tips I Recommend for Beginners
23:45
Panzermeister36
Рет қаралды 816 М.
Молилась за сына🙏
0:25
НАИЗНАНКУ
Рет қаралды 3,6 МЛН
ГЕНИАЛЬНОЕ РЕШЕНИЕ (@fusterdeltiktok - TikTok)
0:18
В ТРЕНДЕ
Рет қаралды 4 МЛН
#kikakim
0:31
Kika Kim
Рет қаралды 10 МЛН
Доброта этой девочки.. #shorts
0:31
Only Shorts
Рет қаралды 3,2 МЛН
Молилась за сына🙏
0:25
НАИЗНАНКУ
Рет қаралды 3,6 МЛН
Байкеры помогли доехать маме и сыну 😯
0:20
Фильмы I Сериалы
Рет қаралды 2,4 МЛН