Everyone else does this mod so I'll do it too... Good for offroading but these things also get clogged with daily use. My Instagram: texasoatmeal
Пікірлер: 50
@flyboy62583 жыл бұрын
That pfffft sound we heard when you removed the factory breather tells me it wasn't working properly. There was pressure in the diff which could have blown your axle seals. Not good!
@jeffkoo59354 жыл бұрын
Best diff mod video I've seen yet. About to do mine and this is very helpful. Thank you!
@kennethhuff71582 жыл бұрын
I think if you checked this every year or so clean it with some carb spray or something you would not have a problem I owned a eighteen wheeler that kept plowing seals saw this little breather on the axle one day while pressure washing my frame cleaned it and never had another seal blow. No I don't mud bog with my Frontier, this is probably a good idea if you do.
@djken4k864 Жыл бұрын
I concur, best video Ive seen on this mod , well done and useful info, thanks.
@scotthall7280Ай бұрын
Filter is made for 5/16 inch and 3/8 inch fuel line. You're using 1/4" fuel line.
@albertmcfry6322 Жыл бұрын
I installed the same kit,very easy to do. Great Video!
@atrious3334 жыл бұрын
I just bought a 2019 SV. Thanks for the how to video. I will be doing this on mine soon.
@dillonorlando77103 жыл бұрын
You probably dont care but if you're bored like me during the covid times you can watch all the latest series on Instaflixxer. Have been binge watching with my girlfriend recently xD
@urielcohen52213 жыл бұрын
@Dillon Orlando Yea, I've been watching on Instaflixxer for months myself :D
@Chevy-hw6lw3 жыл бұрын
Lose the filter it will attract some moisture in time and also limit air flow , which defeats the purpose. You’ll be changing those out once a year or should. The breather vent doesn’t have a filter, it won’t get dirty inside the tail light housing anyway.
@eppyz3 жыл бұрын
or just use a k&n PCV type filter instead. Should last a long time if you wanted a filter on the end of the hose. I know on these Frontiers the front dif uses just a tube as you mentioned. Not sure why they didn't use a tube on the back?
@Op1zilla3 жыл бұрын
Keep the filter, ggz
@denniseft64603 жыл бұрын
Probably just use a $5 fuel filter for a lawn mower.
@davidcobb4527 Жыл бұрын
Hey TO, thanks for the info. I’ve a ‘14 Frontier with about 100,000 miles. So I’m gonna try this and hopefully before I blow a seal.
@TexasOatmeal Жыл бұрын
Nice...that's some mileage for sure!
@mion19813 жыл бұрын
Could you please list out the parts you used, and where you got them? Thanks!!! Appreciate the vid.!!!
@alexismiller43603 жыл бұрын
Excellent work thanks for sharing!
@saltyriderr11 ай бұрын
Great vid I don't think that hose barb 9040-51026 works on the Pro 4x. Tried it and threads didn't line up probs cause of the larger axle.
@mikepierce6883 Жыл бұрын
Wish i would have seen this earlier. Both axle seals are leaking on my 21’ with 26k miles
@massimozanardi64574 жыл бұрын
Hi, good work. Can you tell me why you used a fuel filter for this mod? Thank you
@Op1zilla3 жыл бұрын
Cause it acts like an air filter, letting it breath an not letting dirt an Shit in, ggz
@bengleckl1877 Жыл бұрын
I have a 22 frontier with 15k. My pinion seal is leaking really bad .I've always had some whine on acceleration uphill so I'm assuming they are related .after the repair (hopefully replacement) I plan to do this mod .I've never went off road with mine yet
@SeanDIY Жыл бұрын
Warranty?
@bengleckl1877 Жыл бұрын
@@SeanDIY uhhhh yeah dude?that's what I just said
@SeanDIY Жыл бұрын
@@bengleckl1877 I'd wait until the warranty is up to do any mod.
@bengleckl1877 Жыл бұрын
@@SeanDIY I have a 100k warranty .thatsba long wait ..why should I wait to do a breather mod ?
@SeanDIY Жыл бұрын
@@bengleckl1877 good point. The 100k is probably powertrain only?
@Green_Leaf5 ай бұрын
Is this for the M226 or the C200?
@phambruhh70032 ай бұрын
how would you find out which one you have?
@mostwanted3873 жыл бұрын
I wish you show which way the filter goes I just installed mine but didn't know how the filter go like if it has an up or down way to put it in place.
@TexasOatmeal3 жыл бұрын
It doesn't have a wrong direction
@NaritasanStudios4 жыл бұрын
Nice install vid!
@Brookcitygritty2 жыл бұрын
Any idea what the part number is for the Toyota part you installed?
@TexasOatmeal2 жыл бұрын
This was too long ago...I can't remember and I don't know why I didn't show it in the video. My bad man.
@Brookcitygritty2 жыл бұрын
@@TexasOatmeal all good you actually had it in the video and I missed. Found it when i rewatched! Thanks
@tommylaplante97313 жыл бұрын
What’s that bar going across the bed of your truck for?
@TexasOatmeal3 жыл бұрын
Just a load management bar.
@moltforthecult28602 жыл бұрын
Is this necessary if you don't off road?
@killertofu Жыл бұрын
Would like to know also
@kylestridsberg3128 Жыл бұрын
It is handy if you live anywhere that snows as the road salt will rust the vent shut.
@elonsus9747 Жыл бұрын
Even if you don’t off-road, people still have had seals blow regardless due to the vent getting clogged. Better safe than sorry.
@jpeero Жыл бұрын
Where can I find the parts for this?
@TexasOatmeal Жыл бұрын
Got all mine from amazon
@andresreza99114 жыл бұрын
Offtopic but what size does a Nissan Frontier 2019 axle carry d40 or d44?
@TexasOatmeal4 жыл бұрын
Ummmm...i think 40. I really don't know though! 😆
@eppyz3 жыл бұрын
@@TexasOatmeal Dana Hybrid 44 on the PRO 4X. Not sure on the non Pro 4x variants.
@paulmaclean99983 жыл бұрын
Toyota part is the wrong tread. Ordered it and I’m not about to cross thread the shit out of it
@TexasOatmeal3 жыл бұрын
Man...they just fit really tight...I tired several and this one fits better than others I was told to get.
@jandd86783 жыл бұрын
@@TexasOatmeal not the wrong tread. They are just really tight. I removed the factory one and had to use a breaker bar at first. When installed Genuine nissan, I thought I was doing something wrong, so bought another one and same, fits really tight. Couldn't tighten all the way regardless. Ended up with 2 treads showing because I did not want to overtighten.