Nissan Frontier: Running Rough / Misfire: Part I

Рет қаралды 306,674

Күн бұрын

In this video I have a look at a 2001 Nissan Frontier with a 3.3 V-6 that came in wit the engine light on. It appears to be running rough and I do discover a P0302 (cylinder 2 misfire) stored in the ECM. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained

Пікірлер: 561

@geosutube 5 жыл бұрын

This approach to auto mechanics gets me all interested in it as a profession. And I have never thought of doing it. Well, I’m 76 and going in for hip replacements. Maybe later. Still, this methodological approach means that it’s removed from the “magic” that I have always assumed was needed. Thanks again for these great examples of mind over matter. Remember, if you can do it, I can do it.

@td6253 2 жыл бұрын

Ρ 9

@fsu3784 2 жыл бұрын

Never too late!

@TylerDClott 5 жыл бұрын

Eric, your diagnostic skills are incredible. Many of us DIYers are mechanically inclined, but your knowledge and ability to pinpoint the issue instead of performing part swaptronics is what sets you apart as a true professional. I know I’ve probably cost myself more buying parts trying to fix my own piles than just taking them to a professional to complete the complex work. The problem is that it’s hard to find guys like you these days, and you have to take out a second mortgage to pay the bill a lot of the time. I can only hope to acquire half of your skills one day.

@bushnut8305 5 жыл бұрын

Good job. Diagnosis is the sign of a good mechanic.

@taylorkobylik3765 2 жыл бұрын

Out of all my years getting answers watching "professional" KZfaq auto mechanics videos. Hands down you are the best, at first I thought well this is a little Overkill but stuck with it till the end and I will admit I thought it was going to be something different then proven outcome in a different direction. Very easy to follow and professional ! I've never subscribed2 A Auto mechanic Channel until now

@Jonathanbarros90 5 жыл бұрын

You sir are awesome, usually start off my mondays at the hondu service department talking to a couple of other techs about the latest SMA videos, guys with years of experience still learning something unique from watching you, I have to be honest as I'm watching your videos I thank God for protecting you and providing you with the patience and clientele for doing this, your videos are always crisp ,crystal clear and thorough

@SouthMainAuto 5 жыл бұрын

Tell them guys at Hondoo I said hi!

@nestorroman2694 4 жыл бұрын

I can only do it if I had that awesome scanner and your brilliant knowledge.

@noelhernandez5016 5 жыл бұрын

I always love seeing how Eric O. goes through the diagnoses process.

@mr.nobody4900 5 жыл бұрын

I'll give Two Thumbs Up. Pure Genius Diagnose.

@brickwal92tt 4 жыл бұрын

We had a similar rough running 2001 Frontier 3.3, a new distributor put it back in shape. It now has 336k and still running!

@mikeys1459 5 жыл бұрын

That has got to be the cleanest 2001 Nissan under the hood anywhere

@sabledriver 5 жыл бұрын

Call me impressed, that looks almost new. I love it!

@TheKnightDrag0n 5 жыл бұрын

@Ryan Hogan careful when you pressure wash the engine dude if water geting to the stupid knock sensor it might cause you a headache, for the most part yeh that nissans until 2004 are pretty bullet proof.

@marknicolich5789 3 жыл бұрын

i was thinking the same thing dam wish mine looked like that

@darkzero11ca 3 жыл бұрын

@@TheKnightDrag0n its a common think with those vg engines for that generation. The knock sensor going out.

@MrGardman 5 жыл бұрын

Always fun to see the notification for another South Main Auto video. You always know it's going to be informative and fun to watch.

@GunfighterWyo 5 жыл бұрын

I really like how Mr. O takes nothing for granted. He checks the connectors and everything. He does what a lot of others bypass in the hopes that they can get the car out and the next one in. Mrs. O looks good. Hope you get to feeling better. Who won the go fish card game?

@snakeskinproductions7500 5 жыл бұрын

OK, This video did it for me. No more playing around, I'm buying another laptop and a PICO scope set up. I have messed with the scope on the shop Verus but this is the way to go. I'm sure I could talk the boss into getting one for the shop but I want my own. I would have spent the better part of an hour of diag. time to come to the same conclusion that you just did in ten minutes. Sold. Thanks brother...

@diegoaltminc9141 5 жыл бұрын

Snake Skin Productions you can do the same tests on the verus + you get the guided components test

@snakeskinproductions7500 5 жыл бұрын

@@diegoaltminc9141 I get that but you are missing the point. The shop owns the Verus, I would own the Pico. See where I'm going with that?

@jimwhite5964 5 жыл бұрын

Eric, watching you work is truly delightful! Dead-on diagnoses every time. Thanks for sharing it all with us!

@spicythai2000 2 жыл бұрын

You do a through troubleshooting and very impressive. I can't do all the troubleshooting you do because I have not yet master all the reading you are showing. I just go off my experiences and take everything off and test it. I don't own a shop, I just do it to help my friends from getting overcharge. Thank you for the videos and helping me out.

@tonychandler8908 5 жыл бұрын

I have been watching your videos for about 3 months now and I get so much from them the way you go about trouble shooting the problem you do a great job

@miguelare3 5 жыл бұрын

@Attention to Detail ehhh huh huh you said tits lol

@robertrichardson1133 5 жыл бұрын

Whew, you just saved me. I was getting so bored and bing, a notification for an SMA video!! Today is a good day, thanks!

@secureone22 5 жыл бұрын

Eric, been watching you for almost two years now. I normally don't like your diag videos, but I watch them anyway. I'm much more of a nuts and bolts guy. I think if you put out another engine replacement or long nuts and bolts series, I would be smitten. BUT this one was actually really cool! I love how you methodically broke this down. Keep up the awesome work!

@diydave643 5 жыл бұрын

"Miss Trinity wants to play some Go Fish." Most important diagnosis of the whole video. Awesome job, Dad! 😀

@moldingpro7208 5 жыл бұрын

I enjoying watching your thought process and I love how you teach us.

@ubertalldude 5 жыл бұрын

Very impressive method of diagnosis, I would never have thought you could check compression and injector health in one fell swoop with 3 simple data points. Unfortunately the injector job on the VG motors is a huge pain in the ass, but at least you identified it without having to tear into it!

@MDAdams72668 5 жыл бұрын

really great idea current clamping the injector fuse never thought of that one THANKS Also love how you identified the other reasons the resistance might be high You are way better at explaining things while working than I will ever be

@billsmith2212 3 жыл бұрын

Good to see the thought process . Even though it is most likely a bad injector , you still left open the possibility of a corroded connector . That is what separates you from the pack . Take it to the end , no guessing . Some shops would put in all six injectors if a connector was corroded .

@stevefleck5892 5 жыл бұрын

And yet another diagnostic masterpiece! Mr. O thank you for taking the time to produce these deductive-inductive challenges.

@Wheel.Evolution 4 жыл бұрын

Honestly why I continue to watch all of your videos; Top quality content, mechanics and methodologies. I have learned so much from you!! That PICO scope is cool stuff! --Shout out from Edmonton, AB, Canada PEACE OUT!

@dave1135 5 жыл бұрын

Had one like that a younger tech friend of mine was checking a misfire on a car and he was setting up his scanner to run all kinds of tests like you were doing Eric. Im a old school driveability tech from the eighties and nineties, I pulled the spark plug. The electrode was completely fouled with carbon. Turned out the intake valve stem seal was bad and oil was being sucked into the cylinder fouling the plug. Edit: it is pretty interesting to be able to delve that deep into the engine and find the problem without ever touching the engine or turning a bolt.

@dougtexas 5 жыл бұрын

Really enjoy the fact that if we listen carefully, we are able to hear your thought process in diagnosing the problem. Excellent diagnosis. More importantly, Go Fish! Always loved the card games. Maybe a snippit vid of you losing a hand!

@estpst 5 жыл бұрын

A visit with Mrs. O, what a treat!

@wyattoneable 5 жыл бұрын

Thank you for showing how the scope is connected, that helps. The way you break down the steps makes it easy to follow along too. Always a pleasure, now on to part two...

@dragsterstransmissions 5 жыл бұрын

Knock sensor is mounted on top of the engine block under the intake. So anytime there's a misfire it will send a knock code as well. Sometimes when the dizzy (distributor) goes bad you will get a knock code. Those early 2000's vehicles are quite common here in central Virginia.

@ronmitchell8929 4 жыл бұрын

Good to watch a video of someone that is actually experienced. I don't have a scope but I can go straight to checking injectors now that I know the harness connector. Thanks. 👍

@northsouth9079 5 жыл бұрын

I strive to be as good of a mechanic as you one day. You make diagnosis so easy.

@blockbertus 5 жыл бұрын

I'm pretty impressed on how well this truck looks. Really decent looking engine bay. This owner takes really good care of that thing.

@danlevesque5437 5 жыл бұрын

They probably moved to the area from a rust free state how spotless that firewall and cables were👍

@spicythai2000 3 жыл бұрын

Great diagnosis. I have 2002 Nissan Frontier with P0301. Going to troubleshoot when I have time. Thanks for the video.

@jstutz101 5 жыл бұрын

Perfect Saturday morning, thank you sir!

@InsideOfMyOwnMind 5 жыл бұрын

Better than Saturday morning cartoons, remember those or are you under 60? Lol

@Oldtimecarpenter 5 жыл бұрын

Just want to say "THANKS". because I've learned so much from watching your channel! I really appreciate all the work you put into making these videos!

@High_Tech_Mountain 5 жыл бұрын

Great video Eric. As always thorough diagnosis. Thanks for bringing us along. The power of a scope to be able to check the complete system relatively quick, it’s a beautiful thing. Again thanks for sharing

@willdutcher7857 4 жыл бұрын

Finally a video that has good instruction. My Xterra is misfiring, so this helps me get an idea of what to ask my mechanic. I just wish I had the fancy tools and programs like you!

@ramblerclassicman221 5 жыл бұрын

Wiring and electrical on vehicles has always scared me. Good work mr Erik! Keep it up. Your knowledge helps the world!

@Paul1958R 5 жыл бұрын

Eric, Great video and diagnosis! You did the do diligence: spark, fuel, timing and nailed the problem using the power of the Pico. I wish I had one. SMA#1 God bless Paul

@Thermool 5 жыл бұрын

Looks can be deceiving, but that truck is in remarkable shape! And it’s like 15-20 years old!

@SSMedic 5 жыл бұрын

I can't believe how clean that engine bay is. Someone with some real pride of ownership. And of course, Mr. O for the win on the diag.

@CopCat34 5 жыл бұрын

Great video. Way to go on the diagnose The step by step method was excellent. The best part was when you realized playing cards with your daughter was more important than the Nissan.

@CubasAutomotive 5 жыл бұрын

Getting pretty quick on the diag, or you got lucky. . I like the adding of the other channels at the door. It makes sense to get as much info from the start. Another awesome feature in this vid, you showed setup. Not everyone is familiar with setup or uses the scope. 2 thumbs up Eric! 👍👍

@cjcastellar76 5 жыл бұрын

Sir you are definitely Diagnostic Royalty. I love every video you make. Thank you! Much love from Washington State

@TrentRussell 5 жыл бұрын

Dang look at those slick screen recording overlays! Good stuff.

@laohantun7404 5 жыл бұрын

Trinity is growing so tall, Mrs O is looking so beautiful as always....Thanks bro for teaching us with diagnostics.

@Techman4567 5 жыл бұрын

I sure like your TS style Eric, to the point and no wasted time throwing parts at it. Thanks for the video.

@stacydornan9765 5 жыл бұрын

Another top notch diagnostic,great job Nor.You the man brother

@michaelserrano7097 5 жыл бұрын

The quality of Eric O's repairs are so good, that i even hit the like button before watching tje vid.

@reecenewton3097 5 жыл бұрын

so do I !

@dennishayes65 5 жыл бұрын

Michael Serrano : Dido,Me too !

@josedasilva8924 5 жыл бұрын

Excellent, it makes my day when I see a new video form you!

@codysautodiagnosticsprogra8706 5 жыл бұрын

Great work Eric. I like how you did the RC test then let off the throttle to get running all on one capture. Good idea brotha

@emcque 5 жыл бұрын

Once again, I learn valuable diag skills from one of your videos. Great diag, great explanation of what you were doing, why you were doing it and what the numbers mean.

@PaulysAuto 5 жыл бұрын

Way cool, loved this video Eric, thanks for sharing your knowledge and experience with us! SMA for life!

@chiluco2000 5 жыл бұрын

Simple, logical and straightforward diagnosis, very cool!

@rohithdeevi4739 5 жыл бұрын

SMA is an awesome automotive channel. Thank you eric and vanessa.

@phillully4472 4 жыл бұрын

Eric, your system of deducing which cylinder and which injector is easy to follow along. Thanks for the look into Eric O's mind on getting to to real fix... glad your not another guy who shoots the parts cannon at it!

@chadwilliams4798 5 жыл бұрын

When do you sleep? Got notification of a new video 5 in the morning last weekend! Anyways, stumbled across your channel a few weeks back, awesome! Been addicted! Love your diagnostic approach. Thanks for all your videos.

@JVerschueren 5 жыл бұрын

While his videos are uploading, obviously. :-)

@exophthalmos1 5 жыл бұрын

He schedules his releases for the same time all the time. He covered before in another video. Welcome to the channel.

@chadwilliams4798 5 жыл бұрын

@@exophthalmos1 that makes sense. Didn't realize you can schedule a certain time. On the other hand Mr.O has been in the shop early in the morning, at times stays late and says he's there on weekends too. The perils of ownership! Oh, and thanks for the welcome!

@maryreed2280 5 жыл бұрын

Yep, I'm binge watching the channel.

@seftonplayer32 5 жыл бұрын

I've been hooked for about 5 months, can't get enough as I am wanting to start my own mobile mechanic business soon and am sure I will have more than just service and brake work.

@cae2487 4 жыл бұрын

You used the terms suck, squeeze, bang, and blow for what you need for an engine to run and I 100% agree but I've always used the acronym to go fast you need F.A.S.T. and that is fuel, air, spark, and timing. Great video appreciate the info.

@pleasecho2 5 жыл бұрын

We appreciate your sharing auto diagnostics and repair information in a simple honest way the regular people can understand. Your channel could probably be seen as a resource by those who might not be able to afford dealer service. As we move forward through the next 12 years we hope you and all auto techs will be able to "move on" and abandon servicing all internal combustion engines in a smooth transition toward adapting to providing an equally high level of competent service working on the green power sources that will come with The Big Green New Deal, pitched by Dist 14 Rep Alexandria Occasio Cortez of The Bronx. Just messing with you but i am curious about what you think of all that

@fire7765 5 жыл бұрын

The power of knowledge and experience, thx for sharing.

@bobbybentley8136 5 жыл бұрын

After five kids raised I am the go fish OG and will gladly challenge you Mr. O to a competition. Great video daddyo

@SouthMainAuto 5 жыл бұрын

Pfff... I am a go-fish world champ at our house.... bring it on!!! BTW... do you have a King?

@spelunkerd 5 жыл бұрын

Great case. Thanks for the PICO demo, it really helps to bring everything together. You might make it easier for some of us if you were to show us which channel is which when you reveal the data. I consistently find myself pausing to check the units at the top to decide which curve is which.

@justthetip96 5 жыл бұрын

I need to move to New York so I can have this amazing mechanic work on my stuff.

@gmcsprintman 5 жыл бұрын

Great job I like the step by step process. I still like when big nasty comes out to play.

@the_clowner4017 5 жыл бұрын

If you had a shop near me, I would only take my vehicle to you. Your a great mechanic.

@baxrok2. 5 жыл бұрын

Yeah baby. We were overdue for a good misfire video. Thanks Dr. O!

@JRAX2 9 ай бұрын

Hey brother your videos are always informative & makes diagnosing autos so simple! It never goes so simply for me, but thanx so much for your angle, & the way you do these videos! I really appreciate it's! I've been a mechanic all my life, & it's never easy. I wish I had one of those diagnostic computers like you have! Would make my life that much easier! My lil scan tool broke so now I'm up zhitz Creek! My volt o meter even was stolen so it's not easy but thanks for your videos plz don't stop making them!

@62ejo 5 жыл бұрын

A+ Eric,hope you get the repair,and you video it... I see the young lady has her front teeth growing up fasted,and nice too see Mrs O.

@ghost37666 5 жыл бұрын

Watching one of your videos really makes my day.

@wmcovington1041 5 жыл бұрын

I enjoy watching and learning from your videos. I have a 1992 Honda accord and use your guidance to give me encouragment to explore the electrical part of auto repair. My wife loves to see your family and how they are growing up. Thank you for teaching me sooo much!!

@lornaz1975 5 жыл бұрын

I think I followed most of what you were doing. I must say it was fascinating!

@biz4twobiz463 5 жыл бұрын

Special Guest Appearance by Mrs. O and the kiddo!! lol Wow, that was a fantastic diagnostic!! GREAT video...

@JoesAutoElectric 5 жыл бұрын

Great video! As usual. That was a nice, quick find Eric. Hope you get to fix it.

@samrugtiv3839 5 жыл бұрын

Well done, Eric on the miss note on the nox sensor code should be under the intake if it is one sensor make sure you get the hardness w it or it will burn you, if it is a dual sensor it will come w the harness. Very well done my friend. Thank you again. Sam

@MrFishin76 5 жыл бұрын

Same engine in 2000 nissan xterra. You might want to order the lower intake gaskets also, since you will probably replace the knock sensor too. It is a known POS to replace, and very common. The sensor in under the lower intake towards the back.. I did this job last spring on my daughters car. Also, look out for freyed wires at the injector connectors, I had to replace two harness connectors.

@JohnIsett 5 жыл бұрын

Eric, I can tell you the knock sensor code P0325 will NOT trigger the money light. The engine will simply never agressively advance timing and therefore performance is a little sluggish but few would notice. I wish my 2000 Frontier 3.3 looked nearly as good, but mine has 250,000 miles, and I just replaced the knock sensor--a 4 hr job. That said, when the knock sensor is good, I can't say the engine is "zippy" but it is definitely spunkier! (There are by-pass solutions to the knock sensor on Inet, but they all defeat the protection offered by a properly installed knock sensor.) If you do the injector, take the extra 30-45 minutes to remove the lower manifold and replace the knock sensor ($40). Getting that upper manifold off is a royal pain and the biggest part of the job. And if the valve covers are leaking, do them too!

@BigDaddy_MRI 5 жыл бұрын

I was hoping it puked up a piston. But, NOOOO!! Great video. 👍👍👍 Bad #2 injector and maybe a bad blower motor switch, or the resistor pack for the speed control. Or wiring. Heck, maybe the motor itself. Who knows? Well, I know you will soon. Thanks Eric!! Keep on keeping on. I got a MRI system to calibrate. Always nice to see Mrs. O and your daughter. Good luck on the ‘Go Fish’ playing!! Cheers!!

@BoerGuy 5 жыл бұрын

Eric O diagnostic process is a joy to watch. Applies across the board for most devices. Have fun calibrating!

@localcrew 5 жыл бұрын

Had a ‘92 Maxima. Started missing on one cylinder. Had a gut feeling it was an injector. Stripped the motor down to where I could get to all six. Started testing. One. Good. Two good. Three good. Four and five good. I’m like “Number six had better be bad!” It was. Pain in the ass to get to the injectors. Loved that car.

@edwardmyers1746 5 жыл бұрын

Hell yea more time to see Eric o work!

@thegoodearth7 5 жыл бұрын

I played your interaction with your wife about five times. Each time I was laughing. Then I played it for my wife and she was laughing as well! Your wife calmly deploys the Socratic method when interacting with you ("excuse me?" "I was screaming?" "I was saying what?" "you can't hear?"). Hilarious!

@steveorshon 5 жыл бұрын

Nice move including injector current draw alongside the amp clamp for starter current. On one screen you can immediately see if you have a lame injector.

@Roger21989 5 жыл бұрын

Excellent diagnostics, you make it look easy.

@kluna1000 Жыл бұрын

I got a misfire on an xterra, same engine. I’ll use some of the tricks I learned today. Thanks sensei.

@dragsterstransmissions 5 жыл бұрын

Early 2000's frontiers are known for exhaust manifolds cracking. Passenger (right) side more commonly

@jameswrobel6578 5 жыл бұрын

i live in buffalo my son works at a ford dealer,still cant get my truck repaired with out trial and error,is there someone like you in this area ,i would rather pay to get the right repair the first time,i do own a 99 tahoe no problems now,I never did any youtube stuff until i started watching your channel,in fact i just joined,We need more guys like you to many guys rip you off,great job keep up your great job,as soon as my daughter shows me how to do this new computer stuff i will do more stuff i am 60 and using my cell phone is ify.Again great channel,nice family

@cassiuspuckett8789 5 жыл бұрын

Great video Eric. Love the way you determine if it was mechanical, electrical or control. Nice job......

@richardjones3112 5 жыл бұрын

Brilliantly explained,learning so much from you.Thanks.

@LoveMyZJ 5 жыл бұрын

"You beatin' our children in there???" LOL you guys are great. Love the wicked thorough diag work.

@70289121 6 ай бұрын

WOW, great video. I love learning about the ohm test at the connector, that is something I can definitely do myself. I don't have a scope like you, (wish I did), but I do have a ohm meter like yours. I'm getting a po300 code. I already have changed the knock sensor, fuel pressure regulator, plugs, wires, and distributor. I suspect that I have at least one lazy injector, and I will check the resistance on all of them now like you did at the connectors.

@mechanicmike1236 5 жыл бұрын

Really like your diagnostic approach to fixing cars, thanks for sharing!! Go fish

@sokakutakeda1500 5 жыл бұрын

"suck, squeeze, bang and blow" now I learn new term for 4 stroke cycle, lol! Mr. Eric O. sir more power to your channel and God bless.

@carolynh128 5 жыл бұрын

Can't wait to see part 2. Got 03 nissan xterra 3.3 with 2 cylinder fuel injector clip broken . good luck very brittle parts. Same exact engine .

@coryestanton6366 5 жыл бұрын

Absolutely love your troubleshooting techniques!

@jackpatteeuw9244 5 жыл бұрын

"Old school. Distributor cap !" WOW, I have not seen one of those in forever. Even my '98 E150 had coil packs !

@AIRJAC33 5 жыл бұрын

Customer. “Hi I need a mechanic to take a look at my car. The check engine light is on” Me. “Is it not sucking, not squeezing, not banging, or not blowing?” Customer. “Let me see your manager!”

@JoesAutoElectric 5 жыл бұрын

This is one of the best comments I ever read!

@chiluco2000 5 жыл бұрын

Is not pissing or spitting, it can only be sucking, squeezing, banging or blowing, OK?!

@iskandertime747 5 жыл бұрын

Yeah, I've had some first dates like that...

@coollasice4175 5 жыл бұрын

Or maybe, _"What are you doing tonight, big fella?"_

@danisammy98 5 жыл бұрын

😂😂

@georgeshadrick640 5 жыл бұрын

My brother has one nothing but Nissan dealership with love thank you for your service

@phillully4472 5 жыл бұрын

Hope you and missy Trinity have fun with GO FISH... THANKS for sharing this video... it jogged my mind about of what causing my misfire... but my injector on my Jimmy are a spider configuration! can on the pricey side not like a individual injector. Till your next video take care.