Projector Brown Spot on Screen- FIXED! *Make sure to get this part right or it won't work**

No video

Projector Brown Spot on Screen- FIXED! *Make sure to get this part right or it won't work**

Рет қаралды 7,874

Jeramy Niznik

Күн бұрын

Adhesive Polarized Film Sheets: www.amazon.com...

Пікірлер: 35

@iguanarana Ай бұрын

I just ordered the Polarized film my spot is small compared to what you had on your screen but I too do not want to keep buying projectors. Thank you sir you did a great job showing us your how to do and what to look for on rotating the film. Much Appreciated.

@richardbas2948 24 күн бұрын

It's not the film that burned, it is the adhesive! Even if you clean of the adhesive from the glass and that film, you can stand it back in the projector! One layer is sufficient! But before removing the film stick on a marker that points out the top, from both the film and the glass! With linear polarized film it is essential!!!

@niz76 22 күн бұрын

That would totally work. I believe you can also purchase the polarized sheets without adhesive. Worth a look...

@genepaul69 5 күн бұрын

Thanks…I have like 5 of these same problem! What a waste. Glad I saved them now I’ll try to do all 5.

@espiemgeo Ай бұрын

You inspired me. I hope I can rectify my 2 projectors with black spot. TQ

@hollysheffield4866 6 ай бұрын

Thank you, very useful to know about the polarizing paper orientation! Hope I can fix mine too

@niz76 5 ай бұрын

Hope u get it fixed. U can do it!

@xcqML 6 күн бұрын

thanks for the video is that beamer the haprun h1 ?

@simpletools6805 3 ай бұрын

Thank you so much for this repair vid how does the picture compare to the original performance of the projector and i believe this is the happrun h1 right ?

@niz76 3 ай бұрын

Correct. Happrun H1. I took the polarizing film off both sides of the glass and only installed it back on one side. You can tell the picture is a bit more washed out - but it's hardly noticeable. If you install the polarizing film back on both sides of the glass and notice the picture looks darker than before, you can take one side off and it'll "lighten up". It's actually a brighter for daytime viewing now which I do like.

@simpletools6805 3 ай бұрын

@@niz76 interesting observation i have the happrun h1 alongside other led projectors and i am just doing research for when this happens as i am noticing some slight yellowing in one spot on the happrun on a white background. so having the polarizing film on both sides makes the image darker compared to the original performance of the projector so one side is the way to go it seems that long exposure to heat is the problem here i have seen people on youtube put better and quieter fans like noctua in led projectors for better cooling so maybe this helps with the polarizing film issue too in addition to the reduced noise level

@niz76 3 ай бұрын

@@simpletools6805 Yes heat is absolutely the issue here. I've had to remind my family to turn the projector off when they're not watching TV for a while. Leaving it on all day burns the film.

@aceacejo6114 4 ай бұрын

Nice idea for a DIY. ❤

@marwinou1663 3 ай бұрын

Thanks man! This is very helpful!!

@spanglishgaming 2 ай бұрын

Thanks for sharing.

@weijundemo Ай бұрын

My problem now is i can seem to open the projector 😢

@KevinSanchez90156 Ай бұрын

Yoo what if the lens is a little melted

@weijundemo 2 ай бұрын

Nice. Can i just the polarized film in the slot without the glass?

@niz76 2 ай бұрын

Im guessing it would just melt

@Remedy718 28 күн бұрын

@@niz76what if the glass doesn’t have any film, would you be able to see the images on the projector still?

@niz76 26 күн бұрын

@@Remedy718 Honestly don't know. I can say that when I went from two layers to only one, the picture was brighter and almost "washed out" so Id guess it'll prob look even more so with no film.

@timwegman5776 17 күн бұрын

@@Remedy718 No you would have a white screen with no image

@dinostylo7452 2 ай бұрын

how to find perfect angle please ?..i just got one with wrong angle from ali so now i have two pieces would that do ?

@niz76 2 ай бұрын

Your question isn't very clear, but if you're referring to the polarizing film being wrong- just rotate it 90 degrees.

@dinostylo7452 2 ай бұрын

I am sorry.. I buy small polarized glass for projector, old one get yelowish color.. When i install it projecting screen shows completely wrong colors

@WittaKOfficial 3 ай бұрын

What part of the projector is that piece that’s burnt called?

@niz76 3 ай бұрын

Lens. The film that's on it is polarized film sheet. I linked to what I used in description.

@averagestudent4358 4 ай бұрын

How much you bought the projector for

@averagestudent4358 4 ай бұрын

What's the model

@niz76 3 ай бұрын

@@averagestudent4358 Happrun H1. About $70 on Amazon nowadays...

@averagestudent4358 3 ай бұрын

@@niz76 70 USD ain't bad , here they sell it for approx USD conversion 168 to 264 for that device/model

@msmcolemc 4 ай бұрын

YOUR DUMB THIS SHYT WASNT NOOOOOOO HELP. DELETE THIS VIDEO AND NEVER POST AGAIN

@niz76 4 ай бұрын

lol. Thanks for watching.

@chriscarswell450 22 күн бұрын

@niz76 He's mad because it definitely DOES work! The rude comment was obviously from a projector seller that won't sell as many projectors once everyone figures out this simple fix. Thanks for the information. Now I don't have to keep buying projectors over and over. 😅👍