No Parts Required Rich Running Chevy Truck

Рет қаралды 260,131

Жыл бұрын

In this video I have a look at a customers 2012 Chevy Silverado that has the classic P0172 and P0175. It also has a P0101 so we'll have a look at that too. These are both pretty easy to correct.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 819

@nocomplainadana Жыл бұрын

Mr 0', I just wanted to say as a non automibile mechanic, although diagnostician of 3 decades of H.V.A.C. systems; thank you for your videos. It means alot to all of us! Whether or not we work on vehicle or whatever...thank you sir! Much respect!

@michaelfrohn255 Жыл бұрын

Just a heads up, we mechanic’s are doctors 😂😂😂😂 so please refer to him as dr o 😂😂

@michaelfrohn255 Жыл бұрын

Just like you are a doctor of hvac! We are just paid less 😢😢😢😢

@JohnRodriguesPhotographer Жыл бұрын

I spent about 40 years working with computers from handheld to mainframe. His troubleshooting skills are off the chart. It doesn't matter what you work on, you can learn from his thought process and logic.

@michaelmankowski5092 Жыл бұрын

I think this and all your videos are great and informative. Although I just can't afford some of your scan tools. I do learn a lot from them. I do have a cheap scan tool that does some things like fuel trim. Oh ya, thanks, DR O.

@mrfishbulb7187 Жыл бұрын

@@michaelfrohn255 There's a difference, doctors only practise medicine. Mechanics are supposed to get it right first time every time!😂

@randylahey5005 2 күн бұрын

Awesome I was able to complete a job successfully today because of this video thank you Mr

@Railtech_63. Жыл бұрын

Thanks again for common sense repairs, we need more trustworthy mechanics like you and your shop that believe in doing the right job. Taking care of your customers.

@johnjosephii440 Жыл бұрын

@johncramer99 Жыл бұрын

Agree. I had a 91 mazda b2200. Less that 40k on it. California. It failed smog miserably and was tagged as a gross poluter for tge rest of its life. Took it to the dealer. They said the cat was bad. Paid to have replaced. Still gross poluter. Took to a couple mechanics. And one guy got all the smog readings and pondered for a while, staired at the MAF sensor for a while, then offered me $500 for the truck, that hesitation looking at the maf made me think twice. Took it home. Sprayed carb cleaner and what do you know. Fixed. Scammers everywhere.

@crisprtalk6963 Жыл бұрын

"I got a whole Chevy hate theme going on here..." Classic!!

@markmalikowski4971 Жыл бұрын

Every thing you do is an education for us. And without a good scan tool, I'd have zero clue what was going on. Excellent video!

@FishFind3000 Жыл бұрын

Sometimes getting manufacture specific info can be awesome. For my ford I use forscan and I got a check engine light for a map sensor out if range code. When I scanned it was saying the code was not active but it keeps the light on. If I took it anywhere they would have swapped the sensor and the harness. I just rest the code and had no issue, bought some cleaner and cleaned all 3 sensors and have had no issues since. Just a one time freak out if range code.

@freddiejupiter442 Жыл бұрын

The extra product leaking around the button is how CRC is trying to get you to use more than one can every couple years.

@patrickzadd5215 Жыл бұрын

Eric in 1986 I earned an Associates Degree in Auto Technology I passed all 8 tests and was a Master Technician I consider myself a skilled, experienced Mechanic I’ve been watching your channel for a few years and you’re the best I’ve ever seen keep making magic happen in Avoca note….some of the things I have learned Fluid film is amazing Astro pneumatic tools are legit don’t be stingy with the Brakleen be safe Z-man out!

@allanwainwright1478 Жыл бұрын

YOUR POINT BEING ???????

@lexteakmialoki5544 Жыл бұрын

Master class from one of the best ever. Side note: I been getting bad spray paint cans recently, tube inside falls off. They figured out spray cans in the 60's... Now they can't even manufacture those properly. Junk Junk Junk.

@ricka5471 Жыл бұрын

Great diag. Your troubleshooting skills are 2nd to none. I always learn something from you on each video. Thanks and please keep the videos coming.

@chrisnorden8043 Жыл бұрын

Great diagnosis and repair as always. However, I'm now sad. Reminds me of the 2013 Silverado I had, may she rest in pieces.

@slocavky Жыл бұрын

Great explanation of how the long term and short term trims and how they work. That made sense.

@DIYDaveOK Жыл бұрын

I had a spray paint can do that same thing (actually worse, just spewing everywhere ) and nearly ruin a paint job I was doing on the bumper of my daughter's Corolla. Really infuriating. Thanks as always, Eric!!

@pickles5150 Жыл бұрын

I just found you on KZfaq while convalescing in a hospital bed after a hip replacement and was very impressed at your knowledge base. I’m not a mechanic but I consider myself a bit more than a DIY’er especially for a Priest. Wish there were more mechanics like you we could rely on.

@rawcado Жыл бұрын

Any pain? How long did it take?

@dans_Learning_Curve Жыл бұрын

Yep, you found the real deal here!

@Viper81766 Жыл бұрын

Wishing you a speedy recovery with your surgery.

@sonicdewd 2 ай бұрын

I'm not a priest, but while working on vehicles, I find myself saying, "Good Lord, now what?" :D

@martijn-vels Жыл бұрын

You know you're hooked onto these videos when you yelling "CHEVVY THUNDER!" synchronizes perfectly with Eric's 😅 Re oil burners: I know people like to hate on BMW, but my BMW (328 XI) has non measurable oil consumption at 90K. Ok, no dipstick, skeptics could claim the electronic oil level display is a lie, but I guess the dealer pull out nearly as much as they put every 7k.😊

@Bucketheadland1 Жыл бұрын

You'd have a blast plugging into my Burb.. 240k and counting 👊💪🤑

@richardthomas1743 Жыл бұрын

Hey Eric! You should be thanking Chevrolet for making it possible for giving you LOTS of problems to make videos about! LOL

@fixingitrightish Жыл бұрын

He has started out videos before thanking Chevy for making him lots of money haha

@chimrichalds5205 Жыл бұрын

It's crazy how many of his videos are newer GM products. I legit can't tell if that's all people buy around there or they're just that bad. Ford vids are few and far between and not many imports.

@fixingitrightish Жыл бұрын

@@chimrichalds5205 newer chevys are that bad. And I'm a chevy guy lol

@rockyj2008 Жыл бұрын

RUST EQUALS……CY-NA steel.

@mikechiodetti4482 Жыл бұрын

I'm keeping this video. You explained the relationships of fuel/alcohol content, fuel trims/maf readings and CRC can, not the actual cleaner problem. When you explain it, it makes sense. Thank you for this video.

@luv2yt Жыл бұрын

I'm keeping it too. Thanks Mike, great suggestion.

@CycleGeezer-cq9lm Жыл бұрын

I gotta say again, you are an excellent and entertaining teacher. Really enjoy the logical conclusions you arrive at and the excellent clarifications on how you got there. You take a case of complete befuddlement and when you are done explaining, I almost understand what I thought you were talking about. In other words, GREAT video!!! Keep it up, we're loving it!

@scottnusser6232 Жыл бұрын

Great info on alcohol content and reset for fuel trims! In the real old days we adjusted trims by first removing q-jet carburetor and grinding the anti-tamper plugs out that covered the mixture screws in carb base plate,then re-install on engine and adjust to best manifold vacuum. If you were real high tech you would use a 3 gas exhaust analyser and set co at about 1.5 to 3.0 percent. This is back when men were men and hotrods were built in Detroit.

@SouthMainAuto Жыл бұрын

And now men can be women or non gender specific and choose their pronoun and hotrods are made in China 😅

@mayhemsmaster5050 Жыл бұрын

I thoroughly enjoy your videos, and always learn a great deal from you. Whether it be a scantool or a nut and bolt repair, they both are phenomenal. I hope you do a video on the Odessey... I think it would be awesome. Thank you for teaching this old dog new tricks.🙏💜

@FerretHoldingWrench Жыл бұрын

As soon as you turned onto that long test road highway, I just knew you were about to shout “CHEVY THUNDER” lol

@austintalley4070 Жыл бұрын

I love the videos where you use your brain instead of your back to make your money. As much as we love to watch you replace parts and learn some of your tricks we love it when you get an easy W.

@cujo7240 Ай бұрын

I do enjoy this type of video where you talk through the scan tool readings and what they mean, and the possible reasons for the readings. It's also good to hear what the normal values should be. I'm a DIYer and recently purchased a scan tool, so your videos help me to learn how to interpret the data I'm seeing. Thx 😊

@Darjan_Spasojevic Жыл бұрын

As a professional KZfaq consumer, I say you did good, fella!

@thefuzz1389 Жыл бұрын

Wow! Just ran into this last night on the in-laws truck, alc content was pegged at 65% running fine after a reset with the scan tool.

@BooBoo-vo6oh 8 ай бұрын

Do you read all 740 comments? Learn something new from you on each video. Great stuff.

@benjamincresswell3713 Жыл бұрын

In 1978 I put Mobil 1 oil in my Dads Olds Cutlass at his new house. My youngest sister scratched her name and the year in the cement garage floor when they poured it, that's how I know what year it was. The Mobil 1 oil can said it was "guaranteed" for 25,000 miles. When I changed that oil my Dad said he was not comfortable going 25,000 miles on an oil change, so we adopted a 10,000 mile interval. Mobil 1 wasn't brand new brand new, but it was relatively new on the market so I didn't know anyone using it. We felt like pioneers using it. Today I have a 1998 GMC Yukon with 325,000 miles on it, and I have always put Mobil 1 oil in it at 10,000 mile intervals. Dad's Cutlass was a cast iron 350 Olds I have a cast iron Chevy 350 Vortec. Dad's car was Quadrajet carbureted I have Central Sequential Port Fuel Injection commonly called a "Spider." Neither one of the 2 engines used any oil to speak of at all. I do live in Southern Michigan and have to admit the salt ate Dad's Olds and my GMC is an eyesore, but they didn't use oil. We never ever added any between changes. I also have a 2017GMC 4.3L V-6 VVT GDI w/ AFM and it uses some oil between changes, but I go by the DIC when to change it, so I don't know how far it goes. I wonder why my newer truck uses oil. It's not leaving spots on the garage floor, so it must be going out the tailpipe. Why? And I wonder how much fuel we had in our iron 350's oil at 10,000 change intervals.

@patrickfarneth3876 3 ай бұрын

One of the best videos I've seen that walk thru diagnosing engine troubleshooting. You're the best. Best wishes to you and your family.

@weshawkins7165 Жыл бұрын

I don’t care what your videos are about I like them all.

@MikeBrown-ii3pt Жыл бұрын

As someone who's definitely more nuts n bolts than technical/electronics repair, I LOVE videos like this. They prove beyond reasonable doubt that even modern vehicles can sometimes still be repaired with simple, inexpensive fixes.

@sidvis7235 Жыл бұрын

True, provided you have an expensive analyzer and know how to use them. I'm a retired mechanic, and it just wouldn't pay to purchse one for the possible one or two times I may need it. So, I'm at the mercy of other mechanics who can't read and interprete data with the accurracy and efficiency that Eric posesses. Eric O. you are a NY treasure. People like you shoiuld never pass away or retire.😉

@kylehiltner4185 Жыл бұрын

Chevy also has a computer update, at least they did for my 2010, that fixed some of the programming logic. I was having a to reset the alcohol content once a week as the truck would get really hard to start from cold. I had my shop run the update on the computer and have not had a problem since.

@fixingitrightish Жыл бұрын

Their programming "logic" is so ass backwards. In my impala if it is super cold outside and doesn't reach operating temperatures within a certain amount of time it throws an error for the temp being out of spec. It doesn't have a code for the engine being cold so it throws the code for the engine overheating instead, because wtf else is it supposed to do lol. It then turns off the temp sensor, disables the air conditioning and kicks the radiator fans onto high. My car is cold and it's actively making it colder.

@billmalec Жыл бұрын

Ivan would be impressed 😉

@coreycheatham06 Жыл бұрын

Hello! I absolutely enjoy your break downs and explanations of everything. You're such a great teacher! Thank you!

@johnmurphy6366 Жыл бұрын

GM,keeping South Main Auto in business for years now!!

@misterhat5823 Жыл бұрын

Don't forget Chrysler.

@alaskarailroad3996 Жыл бұрын

Or ford. For the record all vehicles have there issues.

@misterhat5823 Жыл бұрын

@@alaskarailroad3996 Nah. He said he doesn't see many Fords. Chrysler and GM just have more issues than the others...

@peterhodgkins6985 Жыл бұрын

I would never spend any time under my own hood if I was in your town. If I watched every video you ever made, I would still be impressed by the next one.

@bombardier3qtrlbpsi Жыл бұрын

PHAD would be proud 😅. Great work as always!

@Starchface Жыл бұрын

Your depth of knowledge about all these modules and engine management systems is outstanding. You play that scan tool like a violin. I'm starting to cry just thinking about it. Well done good sir.

@davidthomits544 Жыл бұрын

I love that you call Napa crapper

@jimharper6073 Жыл бұрын

@11:57 " you know when you're talking volumetric efficiency " we were sitting around the dinner table last night and that subject came up...

@craigunwin8483 Жыл бұрын

Very good video. I'm very interested in your scan tool videos and how you figure things out.

@sporty1701 Жыл бұрын

Another day, another Chevrolet...got a nice ring to it.

@johnnysechrist6313 Жыл бұрын

My 61 GMC shortbed truck has over a million miles on her.....not even tired....327-375 Chevy motor, four speed tranny. Lowered it around ten years ago.

@cabobs2000 6 ай бұрын

Wait did this dude really bring you his vehicle with taking getting the parts cannon unloaded onto it first? Smart man

@kevinelsdon273 Жыл бұрын

“I hope I am not boring you” lol! Never! Your troubleshooting and logical skills never bore anyone! Your wealth of knowledge is also used by many! Tack on your wonderful family, and joy of doing what you do is amazing! Makes me want to move out to your neck of the woods from the west coast and come work for you for free just to suck up your knowledge!

@johnmehaffey9953 Жыл бұрын

Eric you’ve entertained and educated millions on you’re channel, thank you for your work on the autos and your work on setting up the posts for the tube, hi from Ireland, ps Eric certainly not boring very interesting you’re a magician with the scan tool

@rydenclancy9519 Жыл бұрын

My 02 5.3 doesn't burn an once of oil between changes at 3 to 4K. It tics a little at startup but it has done that since I bought it. 165k on the meter now. Frame solid as from factory

@MrTaffiny1 Жыл бұрын

Yes, I don't understand his hatred for GM. The Toyotas rot out faster than anything GM makes.

@rydenclancy9519 Жыл бұрын

@@MrTaffiny1 to be fair my GMC has never been on salted roads and in Texas.

@WayneB27 Жыл бұрын

You should have drove it past Wilberts to show it where its going to be soon If it doesn't co-operate.

@jimphillips2380 Жыл бұрын

As a 17 year tech before OBD2 and unfortunately after 15 years as a cable splicer I found myself back in this automotive mess. I still find Chevy easier to diagnose than Ford. Don't get me started on Chrysler,oh my God how many modules can they possibly have 😂. This is why I own an 07 CR-V. Still love my Chevy thunder ⚡. Thanks for the video Eric. Mrs O noticed the count of Detroit iron on the lot!!! Blessings ✝️🙏🤗

@dav1dsm1th Жыл бұрын

You could do a target competition with Mrs O, shooting CRC cans in front of a nice log fire. They look like they'd make a nice whoomph accompanied with pretty flames. Stay safe out there.

@iramo1461 3 ай бұрын

I have watched your anti-part swapping videos and dug into this p0172 and p0175 code for 2 days. None of the tests were responding to give me a definitive solution, out of aggravation I started part chasing, was into a Map sensor, and just returned from the auto store with a Maf sensor. Maf sensor got me to -19 from a previous -28 on both banks. Little improvement but did not solve the problem. Long story short, I found this video 2 parts too late. I reset the alcohol content and WALA! A distant thank you!

@gregshook1472 4 ай бұрын

It all makes sense when you explain it.

@glenharper3136 Жыл бұрын

Always learn something from your videos Eric. Thanks for making them.

@davidcamp4507 Жыл бұрын

I'd have cleaned The throttle body myself, just to see the foam! amazing!

@Timbermonkey360 7 ай бұрын

I have a 08 Sierra with the 5.3 that has 438 thousand miles on it. The key is, having a range technology AFM disabler on it 👍 oh yeah, also I never let a GM hater work on it 😁lol✌️just kidding, I think you're a great mechanic, one of the best . As a matter of fact, I wish you or Ivan from pine hollow diagnostics were closer to South Carolina. 👍✌️

@smiles7631 Жыл бұрын

Used to be in the automotive field years ago, moved on to maintenance sup at a big warehouse. Still work on cars on the weekends. I enjoy the scanner videos and learn what to look for from you. Keep up the great work fella.

@richarde.beatty838 Жыл бұрын

actually, I appreciate the hands-on-actual diagnostic manner you have, you explain well, and give the alternative cause. This type of video is priceless training. Thank you and Mrs O

@alanragsdale9220 Жыл бұрын

A name for the New Chevy Trucks Bread and Butter Editions. Ha! Great line Mrs O!!

@mitchrothermel8157 7 ай бұрын

My 99 Chevy thunder is about to finally break in half. Not bad an extra 12 years

@cheriebanks1434 Жыл бұрын

One of the best jobs I've seen...

@markinkster9257 Жыл бұрын

Ivan will be so proud of you !!!

@user-xm4mb8sy2r 6 ай бұрын

THESE VIDEOS ARE VERY IMPORTANT AND ESSENTIAL TO LEARN ALL THE IN'S & out's OF THESE ISSUES. I LOVE SCAN TOOL, ESPECIALLY WAVE FORM VIDEOS. PLEASE CONTINUE TO DO THEM. AN GOOD EDUCATION ABOUT SCAN TOOL USE IS A MUST FOR US AS THEY'RE BECOMING MORE AFFORDABLE THROUGH COMPANIES LIKE "TEMU", STRAIGHT FROM THE MAIN LAND. BLESSINGS ALWAYS BROTHER. 😊❤️

@scottjeans6184 Жыл бұрын

What is your dislike with "GM" I have had nothing but good luck with my GMC's. I currently have a 2009 2500 HD with a 6.0,6L90 Trans,3.73 years,250,000 kms, and it runs like the day I purchased it,just simple maintenance. I live in Canada and we get brine and salt in the winter,my truck did 4 years as a "commercial tire service" truck. It is Currently on it's second set of brakes (only one set) one tune up, it did need coils and everything wires also. I am going to drive this thing for 30 years! Love the channel!

@kellykonoske91 Жыл бұрын

Man! Do you know how many 70's to early 2000's Chev, Ford and Dodges there are still working up here in Oregon? ( including my 96 F250) Holy Crap!! Take care Eric. Todd Konoske the retired trucker.

@timvener3723 Жыл бұрын

I love the Diagnostic how it works, scan tool Vids.

@tyree9055 Жыл бұрын

When you come to Mrs. O and ask for the "experienced diagnostic sniffer" of Mr. O's nose... 🤣👍

@peacefrog0521 Жыл бұрын

Not a big Chevy fan but I did enjoy the V8 rumble sound through my subwoofer 😅❤🎉

@Ghauster Жыл бұрын

GM did good getting some of their intake plumbing to sound like a carbureted engine. When I traded my 09 for the 17. They had gone downhill in that respect.

@lacanmarezz Жыл бұрын

Every job that you do is so easy Till I start diagnostic in myself😅😅😅 I appreciate all the videos to you there really help people

@FeguerFineArt 2 ай бұрын

Yes please, may we have more scanner videos!

@fredyounger5850 Жыл бұрын

THANKS FOR THIS VIDEO IVE BEEN HAVEING THE PROBLEMS THAT THIS PERSON HAS BUT GOT IT FIGURED OUT AS YOU DID BUT THESE DAM 02 SENSORS GOING BAD AFTER 30- 40.000 MILES IS WHAT IS MIND BLOWING FOR ME UNLESS THEY HAVEN'T BEEN CHANGED.

@Lastneuron66 Жыл бұрын

The more engines become computer integrated the more these types of solutions are needed, well done Mr. O.

@wendyfyke55 Жыл бұрын

I have been working on cars for fifty to fifty-five of my sixty five years of life. I’m not a pro or have an certified credential’s but I wish that i had because I believe that it would have made me a better provider for my family ❤ that I love. I like your utube video’s because l learn so much it’s better than an education. Also i love how your family get’s involved with the process and aren’t afraid to get there hand’s dirty! You don’t know how much time and money we -our family has benefited from watching and learning from your Utube stuff! So thank you. P.S. if your ever in Nashville we owe you a free Lunch or Dinner 😇🤑😽

@davebern8e716 8 ай бұрын

You look great behind the wheel of a chevy!

@randycarpenter2914 Жыл бұрын

Dr. Eric is healing another one. Now it's all better. There are a lot of things to keep them running today, and I don't understand why they are so complicated. Can't tweak the carb to fix rich or lean. Takes Dr Eric to weed out the problem.

@andrewlisenby9693 Жыл бұрын

Eric, you're one of the dying breed of real auto mechanics. If I had a car and lived within driving distance of your shop, you would get my business, because I know you would do the same as myself, do it right!

@richardkrieb4146 8 ай бұрын

scan tool stuff is my favorite! keep em coming😂

@darylmorgan9887 Жыл бұрын

Loving the diagnosis videos Eric. Nice work

@rjb6327 Жыл бұрын

Always nice to see Mrs.O, even if only in a mirror.

@TheGor54 Жыл бұрын

Never knew that slot on the cap of the can was a straw storage until now..👍

@FinalMix64 Жыл бұрын

That Genesis power draw from someone adding an extra fuse, Grand Caravan high speed bus with frayed trunk wires, that Chevy truck that lost its ground due to salt, and the twisted Hyundai camshaft diags live in my head rent free. You have an amazing diag process. And of course that Sedona starter you had to warranty due to junk parts.

@D.Guitar 8 ай бұрын

Just remember. Eric. If I can't Do it..?. . You can Do it !

@bensmith6051 Жыл бұрын

Showing off the big ‘ol JD mini excavator!! Front and center in the windshield. DEERE POWER BABBYYY!

@sk8shackcrew 5 ай бұрын

I really enjoy watching and learning from your videos. Thanks for all. you do and keep up the great work!

@Darenator1 Жыл бұрын

You always have great content. I Disagree on the "Clean ethanol" statement. By the time you farm all the corn (electricity to irrigate, diesel fuel to plough the fields and harvest) then ship the corn then process it into ethanol you have created more pollution than your offsetting. Then you have less horsepower so you burn more fuel.

@Tommerd Жыл бұрын

Thanks Mr. O. I like cruising around town with you. It's cool!!!! And in a Chevy THUNDER it's all the better!

@patriel1 Жыл бұрын

I had to look up lambda and Stoichiometric combustion, I learn something from everyone of your videos!

@JohnDoesGarage Жыл бұрын

I’ll take all the videos I can get on scan tool usage, especially when you’re explaining how to interpret the data. Thanks for showing.

@theronkuhn4638 Жыл бұрын

Good job,I always enjoy your fixes. Thanks

@adamaustell7232 Жыл бұрын

Really enjoy your videos! I bet they have been running that truck super rich for a while and the gas vapors in the crankcase remains for a while. I used to own an old '85 Chevy that was owned by a local propane company that was running a propane setup complete with a small tank. I took all that stuff off and bolted up a nice 4BBL carb and installed a new gas tank. Lot easier to gas it up than constantly need to get propane. It always smelled like a barbecue grill when it ran, even on gasoline!! Just couldn't get those vapors out of that engine. You're the best, Eric! Thank you for all you do.

@Gators-zn5fd Жыл бұрын

I learn something new from every video you post. Thanks Mr O.

@stationaryenginesworldwide Жыл бұрын

Thanks Eric you always provide a great video. And teach us at the same time.....

@davidmcclain5180 Жыл бұрын

Another great video. Pretty mundane to you but I learn something every time. Thank you Eric.

@cullenmiller8170 Жыл бұрын

Nice video and explanations like always. I will watch anything you upload since I seem to always learn something. You could upload a video on putting on shoes with Velcro straps and I would watch that too. 😂😂

@Blovi-qd4lh Жыл бұрын

These videos are great. Because they show your learned, methodical approach to fixing these things. Good on ya.

@DavidGonzalez-61shamy Жыл бұрын

Very informative, thanks for sharing your experience and thoughts. Always appreciated.

@dans_Learning_Curve Жыл бұрын

Smooth transition!

@weloveups831 Жыл бұрын

Your videos are awesome. I learn something or pick up some tidbit in every video

@wyattoneable Жыл бұрын

I enjoyed the explanations along the way.

@karenboles4542 Жыл бұрын

Love your videos, especially those diagnosing electrical problems.

@gordonmcconachie2492 Жыл бұрын

Thank you for such a splendid demonstration

@slider1956 2 ай бұрын

Eric I love your videos and especially your hate of the Chevy. I would love to share that I own a 2008 Silverado with 295,000 Kms…V8, DOD/Fuel Mgmt etc…this truck has an oil life monitor which I have followed since day 1…it’s now starting to burn oil more recently which is understandable. I just felt like sharing this with you. Thanks for the great videos. Oh by the way I am in Canada with the winter salted hwys like you in NY State.