No Stick Drift! Steam Deck Hall Stick Upgrade ($30)

Рет қаралды 39,195

Күн бұрын

Gulikit has made new Steam Deck stick replacements, which feature zero dead zones and magnetic Hall sensors to prevent stick drift. The best part is these new sticks don't require soldering, and they are simply drop-in replacements. Let's see if it's worth $30 to pick up a pair.
Buy some here: amzn.to/3QrhohQ
Electric screwdriver: amzn.to/451nOZ5
These sticks were sent to me by the manufacturer for testing and review. All opinions are my own, they did not see this review ahead of time, and no money was exchanged in any way.
Timestamps:
00:00 introduction
01:23 unboxing and setup
02:57 teardown
05:45 installation
07:44 calibration
09:09 testing
10:20 summary and conclusion
If you want to support the channel, please consider Patreon: / retrogamecorps
Find me on Discord! / discord
Theme song written by Jim Gray of Our Ghosts:
ourghosts.bandcamp.com/track/...
Note that this description may contain affiliate links. By clicking on an affiliate link and buying something, I may earn a small commission of the sale at no extra cost to you. You can read more about that here: retrogamecorps.com/about/
This video is for entertainment and educational purposes only.
#SteamDeck #Gulikit #StickDrift

Пікірлер: 178

@PANCHO15108 11 ай бұрын

Heres a tip for everyone. I have had these sticks since Feb of this year. In steam settings you can shrink the Deadzone down to literally 0. It will give you alot better control and feel more responsive. I absolutely love the sticks myself. Great video as always man cheers.

@pierreplayfair 11 ай бұрын

I lowered mine by a bit but now I'm gonna try this lol

@RetroGameCorps 11 ай бұрын

Good tip, thanks!

@ev4_gaming 11 ай бұрын

this an absolute must to do. Otherwise you just got anti stick drift sticks. With a lower deadzone, you got _good_ sticks

@tryhardtrav 11 ай бұрын

I'm a simple man, when Retro Game Corps post a video, I click... and I don't even own a Steam Deck. Great Job Russ!

@user-wl2xl5hm7k 11 ай бұрын

Same 🙌

@GavinWightman 11 ай бұрын

Russ can and did make a video about Chicken and we'd still watch 😂

@eskelsen11738 11 ай бұрын

In between retro game corps videos i like to sit down and think about my place in the universe, the next retro game corps video should be ready by then

@nmauricio 11 ай бұрын

Haha me too.

@pol4195 11 ай бұрын

I don't own a Steam Deck and don't plan on ever getting one. Hell, it's not even officially available in my country. However, it's a Retro Game Corps video, so you know I'm watching it!

@Th3Rom3 11 ай бұрын

BTW: If you scroll down a bit further in the systems menu and click on "Model/Serial Numbers" in the Hardware section it will spell out the type of sticks named "Type A/Type B" on the parts overview screen.

@TheExFatal 11 ай бұрын

I literally installed these two days ago, and I love them so much - they have this very unique feel that I can't get enough of, I'd recommend upgrading even if your sticks don't drift at all

@rogero8443 11 ай бұрын

Even though I have no need to get the new sticks it's awesome we have people like you to make these vids. You've answered anything I can think of wanting to know. How it feels to take it apart, how it feels to see it's guts, and other stuff that this vid may come in handy for. That's important and more than just the directions. Everyone new to this will feel awkward and it helps you did too haha. Really tells them how they will likely feel. Thanks good sir.

@justicerainz 11 ай бұрын

Thanks for the video! I just started having issues with my right stick on my deck last month so I was looking at picking up this set. Thanks for the concise video!

@Baumie11 11 ай бұрын

I love the content. It’s awesome people like me who don’t have most of these devices find themselves watching all your videos because they are so informative without being super boring!

@dragoneater6771 11 ай бұрын

This channel is absolutely awesome. I have learned so much about emulation and retro handhelds. In fact, if I hadn’t have found this very channel, I would know nothing. So thanks Retro Game Corps!

@clintbeastwood3245 11 ай бұрын

I tried these and went back to stock. The dead zones were impressive but the input fields are squared not round, which led to diagonal input registering slower and less precise than stock sticks. If they can make the input area circular instead of squared these will be worth it to me, and i would try them again.

@brucestine9980 10 ай бұрын

This is good to know!

@rfischer1984 7 ай бұрын

I got the elecgear brand because they said the input fields were round. I installed them and they are indeed round. They seem to work great so far.

@MonkeySpank112 11 ай бұрын

Perfect video. My wife got a steam deck in January and within 6 months the left stick developed a problem with it literally sticking to the upper right. It can be fixed by simply moving it but it does cause her to get annoyed. So I might just upgrade them for her to save her some trouble.

@joshuaroughan3350 11 ай бұрын

I've been a fan for years, your videos on the RG351V convinced me to get on, today I'm picking up a Steam Deck which are still hard to come by here in NZ, I'm excited!

@eyeswulf 11 ай бұрын

I remember getting stick drift in my PlayStation controllers and realizing that this was going to be my life until I could scrape enough money together for a new controller. What a time to be alive where issues like this have an affordable and operable solution

@Hey-Its-Dingo 11 ай бұрын

The DualShock 2 actually had calibration functionality in its sticks to prevent stick drift. You just had to press L3+R3 at the same time and do a 360 rotation on both sticks, and it would recalibrate them. Sadly, it was literally the only controller to ever have that feature.

@snowzZzZz 11 ай бұрын

@@Hey-Its-Dingo I don't understand why they don't just do this by default whenever the controller turns on well, money...

@Hey-Its-Dingo 11 ай бұрын

@@snowzZzZz The DualShock 2 is the PS2 controller from 23 years ago, they should 100% be able to just do this in every controller. So yeah, it's money.

@jimdoom2276 11 ай бұрын

The really crazy thing is that although the PS2 controller may have had a calibration feature, it never developed drift in any case. And I played the shit out of my PS2! In fact, I don't ever remember getting stick drift on ANY controller, until the last (PS4) console generation. It's TOTALLY abt money - not only are they deliberately not using HALL sensor sticks, they're actually using parts which are DESIGNED TO FAIL after a year of normal use.

@Hey-Its-Dingo 11 ай бұрын

@@jimdoom2276 The PS2 didn't use HALL sensors either, it was just better made.

@sendoh873 11 ай бұрын

Wow, I bought the original Gulikit sticks last year for when I have to replace my Steam Deck analog sticks. Pretty cool that Gulikit finally made ones that don't need to be soldered. Saves me more money from having to buy a quality soldering iron. I just wish that these new sticks were made in the first place instead of the ones that I bought (which need to be soldered) but oh well

@blastv110 11 ай бұрын

I'm thinking about adding these sticks just as a precautionary measure. Thanks for the tutorial.

@TheScripflipNetwork 11 ай бұрын

Thanks for the info again. You've held it down here online. I appreciate your unique presence in this flooded economy of tech/gaming personalities. Peace

@drinks_menu 20 күн бұрын

Im so happy these exist I was so worried my stick drift was gonna cost a lot to fix

@kenappleby8481 11 ай бұрын

I already did it just because. I didn't want to have to worry about stick drift ever and I really love the Gulikit Pro controller on my PC, so for $30 and no soldering I was in. The hardest part is dealing with the ribbon cables. Like you said, I don't feel/notice any difference with these, but there is peace of mind with them.

@jorisbonson386 11 ай бұрын

You needn't have bothered.. the SD sticks don't suffer drift.

@heyjeySigma 11 ай бұрын

@@jorisbonson386 uuuh yes they do. my left stick on DAY ONE drifted downwards very very easily as soon as i lowered the left stick downwards a tiny bit. This was on an early unit in April 2022. Anyway thankfully Steam has a dead zone calibration so that helps a lot

@jorisbonson386 11 ай бұрын

@@heyjeySigma Exactly.

@FelixAndrews 11 ай бұрын

Nice to know the option's there! I've put a pair on my Amazon wishlist and I'll grab them if I ever develop a fault, I guess.

@scottwhite9609 11 ай бұрын

I went ahead and picked these up as I was doing a full shell swap anyway. Definitely a preventative “might as well” kind of maneuver.

@corky2618 11 ай бұрын

I’ve been using the new sticks for a month - my left joystick was a little taller than stock and caused the joystick to stick when pushed to the full direction 1/4 of the time. This was fixed by loosening the mounting screws, though the board is now not as secure as the right joystick. It’s also worth mentioning the square active zones with these joysticks.

@PANCHO15108 11 ай бұрын

I would switch out the sticks if you are having this issue man. Sounds unpleasant and would drive me banannas.

@andrebrait 11 ай бұрын

Sometimes the sticks get a little pulled from their socket during transportation. Have you tried pressing the stick (as if you were pressing L3, but harder) to see if it somehow goes back in?

@yeseeyye 11 ай бұрын

Awesome vid! Would love to see you talk about the ntendo ds and i's, i feel like you would be the perfect guy to talk about them!

@georgearn1 5 ай бұрын

I got a stick drift with the right stick, it now lives it's own life with the camera going slowly up and right in the games... So I remembered about this video and ordered my pair of gulikit sticks

@caliguy44 11 ай бұрын

This is the mod I'll upgrade when stick drift happens and might as well upgrade the 2230 to 2tb when it gets to that point. Doesn't make sense to change out now when everything is working fine. Great video as usual.

@maxv658 11 ай бұрын

My thoughts exactly. I thought, "well, this is good to know if I ever get stick drift. At the same time I will also purchase an upgraded SSD and do both."

@MithosDagon 11 ай бұрын

The SSD is super easy to change…so you don’t need to wait. You just have to make sure you remove your SD card

@Neon_Plasma 11 ай бұрын

Better to wait anyways for the gen 2 hall sticks

@hakzource8660 11 ай бұрын

@@Neon_Plasmayeah considering you can set massive dead zones the deck anyway

@andreac7a 11 ай бұрын

One thing you forgot to mention is that due to their higher precision hall sensors allow you to set a much smaller dead zone. Almost a zero dead zone actually. The dead zone must be set in the system settings. But it's very easy to do: it can be done from the standard settings GUI without even having to go to the desktop mode or the CLI.

@sebi2944 11 ай бұрын

ive got that exact killswitch setup on my deck too! love the magma skin

@Sphinxycatto 11 ай бұрын

I knew that guli sticks would be available for the steam deck They've been a great upgrade to the switch too

@GuyManley 11 ай бұрын

I did this with the soldering needed versions. You can over tighten the PCB screws for the sticks. This could cause the thumb stick dome to bind on the deck's case. So less is more, you'll feel if it's not right by doing sprials and zig zags on the sticks, so don't put the back on until they feel good at all stick positions.

@telsan4291 11 ай бұрын

Great review! Since you were removing the back should have done a repaste, swap for bigger SSD & rear backplate change (JSAUX heat sink version). This is what I did to mine and it made a pretty big difference, much quieter and cooler now with more space it’s Max Deck 😎

@JD-gn1oy 11 ай бұрын

This is like watching a surgeon look at those steady hands!

@alioth2021 11 ай бұрын

I just installed some guilikit sticks on my switch lite. Well worth it.

@Sim-sq2hu 9 ай бұрын

Got these because just about a month after I got my deck it wasn't great at re-centering the sticks, and I was opening it anyways for an SSD upgrade, so why not, they're great so far

@WillThrillin 11 ай бұрын

I did mine several months ago. I did this, a transparent back plate from jsaux, added a dbrand skin to the front, got the killswitch, got the baseus external battery and d brand battery holder for the killswitch. Only thing left is a 2 tb ssd. Soon as they come down in price that is!

@Biddymacp 11 ай бұрын

Glad you say it’s not essential mod. Always though it was odd to replace your sticks so that you don’t ever need to replace your sticks.

@canmipais1420 11 ай бұрын

These new version of Gulikit sticks which have built-in A/B switch and free of soldering was a blast for me at first, until I find out there's some issues. The center deadzone is all good, but on the outer side the sticks seem to report 100% values way before being fully deflected. This means comparing to the stock sticks, these ones will report a higher off-center value when being pushed out the same physical angle, making them to feel way more sensitive than normal. On my unit it's about 70% of full deflection. And yes, this behavior seems to be built-in to the sticks themselves, no calibration on the OS side seem to help.

@Zoolander2157 11 ай бұрын

Great guide! Seems like if you bought the base version and are upgrading the SSD, you might as well do these at the same time. Otherwise waiting is probably the best bet like you suggested :)

@latibass 11 ай бұрын

You should upgrade the ssd anyways even if you bought the 512 version. Unless all you play are games less than 10GB, a 1TB ssd will be better

@turanx0 11 ай бұрын

@@latibassI bought the base model with a 1TB micro SD because all I’m doing is emulating, so no need for anything more.

@misterdneh 11 ай бұрын

He's on vacation and still sharing content 🎉🎉🎉

@lolcat 11 ай бұрын

by the way the deadzones are squares and not circles with these so games that have more precise movement will make problems perhaps

@XxGeNuiN3xX 11 ай бұрын

Valve are the real ones for making it so easy for us.

@joshallis0n 11 ай бұрын

Really hope they make some of these modules for the Ally as well

@yuanchoy2 11 ай бұрын

Very good idea

@s01itarygaming 11 ай бұрын

In theory you can play at a higher range of motion with these since you can remove your deadzone entirely (there's a small deadzone by default since the out-of-box joysticks need it). In practice, however, some games don't like 0 deadzone and even with the anti-deadzone options in steam input it can be hard to take full advantage of it in those games.

@JubalVoid 11 ай бұрын

You may need to change the dead zone manually to have any actual increase in precision or responsiveness. That said even Linus from LTT didn't notice an improvement in precision/responsiveness in his ultimate steam deck video and he's a big nerd about that kinda stuff, so its benefit could just be overblown marketing for hall sensing sticks.

@homebrewGT2 11 ай бұрын

the selling point is that they wont ever have drift, never claimed more precision :v

@JubalVoid 11 ай бұрын

@@homebrewGT2 Claiming no deadzone [which they explicitly do for their controller using the same tech] is the same thing as claiming better precision. The whole point of deadzone is to offset phantom movements from imprecise sticks. they also explicitly mention a smaller center offset on the Deck stick product page compared to stock.

@gabo007x1 11 ай бұрын

@@JubalVoid This. Gulikit is massively overhyped, imo. I remember the Odin community gushing over those sticks, but it turned out that the cheap-ass Retroid hall effect sticks are a much better replacement.

@JubalVoid 11 ай бұрын

@@gabo007x1 I am curious if it's just the impact of user calibration rather than factory calibration. The sticks do seem slightly better, but most of the drop-in versions aren't impressing like the stock-installed versions of the same tech.

@gabo007x1 11 ай бұрын

@@JubalVoid Seeing as there are two options to calibrate the sticks on those android based devices with one being objectively better than the other, you might be on to something.

@somerandomeguyonyoutube 11 ай бұрын

This is the first mod of many I did on my deck

@flightless 11 ай бұрын

The original sticks that shipped with my Deck were creaky and awful. At the time, I was just thankful to actually get the Steam Deck, as this was back when Valve was originally just trying to catch up with their order queue, so I certainly wasn't going to return it over the sticks having some sort of defect, knowing that they were designed to be easily replaceable anyway. Still, it took me too long to get around to this upgrade, but it made a world of difference, and I would highly recommend it to anyone as basically essential.

@alefgardhero 11 ай бұрын

For projects like this I like using an old ice cube tray to keep the screws in order.

@93SupaFly 11 ай бұрын

for those having issues with this new gulikit sensor on their new transparent JSAUX front and Back kit ( if you having a stick that stuck on one end or both ), uninstall the board, take it out, take off the cap, sand down their plastic piece the lower just abit. the gulikit sensor way too tall so its stuck in the jsaux body.

@hirobian2 11 ай бұрын

I am going to wait until I actually get stick drift before ordering the B version of those. If Valves sourced joystick part quality is good then it should be quite a while before this happens considering I only put my SteamDeck through light use most of the time. Regardless I do like that the option for hall effect sticks exists now so the replacements are technically better than the originals.

@ubiquill 11 ай бұрын

I recently did this mod with the same upgraded model of sticks. The instructions that came with mine didn't say anything about the command, and instead instructed to use the small buttons on the PCB of the thumbstick to adjust the center point in the calibration setting screen. I had heard the command can result in sticks hitting 100% when only partially pushed. I ended up taking mine out though, because I mostly got them to make the deadzone smaller, but mine had a dead zone that barely fit inside the default Steam Deck setting. They were way worse than the stock ones. I'm keeping them as backups if my sticks ever drift, but I was pretty disappointed overall.

@mattswoboda7543 11 ай бұрын

I did get stick drift on the right joystick but these weren’t out yet so I replaced with OEM one. Thanks

@duaplex1 Ай бұрын

Hi Russ, first of all, love your content. I based my Steam Deck purchase on your recommendation. I wanted to ask you aboutt the Clicky buttons and if you are going to try them on the Steam Deck? I'm curious to know your thoughts on the D-Pad mod and if its going to help with retro games. The classic Contra test would do it :)

@kahlancypher 11 ай бұрын

It's not correct to say it's only a preventative mod with no effect on the feel, that is only true if you leave the deadzone at it's default calibration for the stock sticks. With hall effect sticks because they are so accurate you can turn the deadzone off if you like and get a large bump in precision.

@RamonAVoglMiranda 11 ай бұрын

I love those pillows where did you purchased them at?

@jsawhite 11 ай бұрын

the other advantage of the hall effect sticks, is you can decrease the actual size of the dead zone making the sticks more responsive... it can be decreased a good amount!

@JDRos 11 ай бұрын

Oh my god it's available for $20 on a local online shop 😁 Also I was hoping for you to change the deadzone to 0, bit disappointed by that. 😅

@DeeKnow 8 ай бұрын

So like.. I'm a Q3 Type A stick steamdeck owner. I've got about 40 hours of gameplay actually on my sticks. The sticks that came with it have drift downwards at anything below 2300 in the calibration settings and have been that way since I got it. So I guess I'm a try these out.

@DeeKnow 8 ай бұрын

IT's actually why I used my steamdeck as a windows device for the last year. I can't justify anything but d-pad and final fantasy with the current stick situation.

@NotTheCIA1961 11 ай бұрын

The reason you're not feeling the difference is because you've not adjusted your deadzone. There's probably a good 7mm diameter of stick drift at least with mine, so I had to set the deadzone high enough to get around that. With a kit like this, you can set the deadzone to or almost to zero.

@badfriends5206 11 ай бұрын

Nice shirt man

@RonOverdrive 11 ай бұрын

Honestly I didn't suffer stick drift, but I still upgraded to these because I didn't want to have to deal with drift in the future and I own Guilikit's Kong2 controller which I've been very happy with. My only problem with them is despite Guilikit stating the sticks will never re-center properly due to Valve's design, mine seem to need recalibrating with each restart as they drift slightly out of calibration. Granted its nothing crazy that would prevent them from being usable, but its just really annoying every so often having to switch to desktop mode to use the software recalibration tool.

@Beanee27 11 ай бұрын

"Upgrade"? 🤔

@bb_lou 11 ай бұрын

I don't have drift but my left stick has a weird spot that's a bit stiffer than the rest of the joystick. It feels better now that i opened it up, cleaned and lubed it but it still has what feels like a small bump or something, so I've been interested in replacement sticks, but I'd rather not have to desolder and resolder tbe caps for capacitive touch if i can avoid it, and these ones are a lot more readily available than the Valve ones. Since my stick feels weird im worried it might get worse soon and id rather be safe and have a replacement handy.

@noxBrutalis 9 ай бұрын

Hey great vid! Is there an option to completely turn off the joysticks? Thanks!

@gagz9k 11 ай бұрын

I think I've expend more time finagling with the deck than actually playing games with it. And I LOVE IT. Won't you do a full cover replace video? Honestly, the customization of the 'deck is what sold me over the Ally. Happy vacations!

@PANCHO15108 11 ай бұрын

Tinkering is half the fun man.

@JeffBreyer 11 ай бұрын

Never had stick drift on the deck. The switch on the other hand... I may do this upgrade though.

@SANT14GO 11 ай бұрын

I need to say I love that decal, do you have any link for it?

@Zalibidas 11 ай бұрын

if you are even just a little careful ya don't need to unplug the battery. can just power down fully and leave it for 20-30mins. i only mention that because ive seen a lot of people destroy the cord or port the cord goes into trying to unplug it with too much force. much more than ive seen people not unplugging it and ruining their deck.

@ev4_gaming 11 ай бұрын

these sticks also have near 0 deadzone. The standard sticks do not. This makes a _massive_ difference for certain games such as first person shooters. (you do need to decrease the deadzone in steam settings yourself)

@BandoidView 11 ай бұрын

Oh... I am absolutely doing this.

@user-hk5fo1nm9h 11 ай бұрын

This is weird because it’s actually a huge upgrade if it stops all drift because you can go into the settings and turn off your dead zones which makes them feel way way better for a lot of games like shooters.

@lennylinn6275 7 ай бұрын

ive seen a few people on reddit have issues but overall ive never had any issues once i had to recalibrate my sticks cause occasionally my right stick when i was using it would be overly sensitive when moving it down after re calibrating and cleaning haven't had issues since. good to know its not hard at all. my only question that silver tape. is it needed or can you throw it away I saw you put it back at the end of your installation.

@eclektric 11 ай бұрын

Just swapped out my switch joysticks 2 days ago I really hope they last cuz I've gone through 4 sets of joycons

@alucard971 11 ай бұрын

The only discrepancy i have putting hall effects on the Steam Deck is the portable aspect: the hall effect sticks are *magnetic* meaning if power gets low, the sticks will start to malfunction. So my questions are: How does the Hall Effects affect battery life? Do they begin to malfunction at low battery power?

@Neon_Plasma 11 ай бұрын

The second gen sticks don't have the power draw issues of the first gen. Unfortunately gulikit sticks are first gen.

@ingramli7733 10 ай бұрын

@@Neon_Plasma The revised solder-free version does are second gen, there is one real caveat for gulikit sticks (both old and new revisions) tho, that is the "square" shaped active zone, rendering some specific games unplayable.

@runnerup15 11 ай бұрын

Do the hall sensors have different sensitivity? I heard some people were having trouble with racing games after the mod (but i think it was addressable via adjusting dead zone? Or perhaps just recalibrating? Unclear)

@f937r 11 ай бұрын

I think I've seen mention of issues with the "max tilt" of the sticks and the dead zones being potentially calibrated wrong which leads to having to widen your dead zone via software. The tilt issue can't be fixed, afaik.

@guywhoplaysbass 11 ай бұрын

Could you do a similar tutorial to replace the ABXY buttons?

@RenaissanceRoadTrips 11 ай бұрын

Do you need to adjust the dead zone with the hall sensors?

@brooklyn71484 11 ай бұрын

Do you know if they are planning on making custom colored ?

@mbuhkah9372 11 ай бұрын

if there anyone noticed that you`re using a different thumb sticks, I think they are paranormal or something, its look identical with the stocks thumb sticks

@everywhereanywhere100 11 ай бұрын

I hope they sell part L1 and R1 button and their controller board because my L1 button was not function property.

@Zero 11 ай бұрын

Good call, “if you have stick drift a good mod to do if not no need for it”

@herohunter81 3 ай бұрын

I’m looking for the OLED stick replacement. The internals are different.

@HardwareLust 11 ай бұрын

Hall effect trigger update next?

@elyonsaint4113 11 ай бұрын

Can u do a review of yhe switch hall sensor sticks?

@idontnkow 11 ай бұрын

we really need a d-pad replacement for the SD because the stock d-pad suxxxxxxxx. really difficult for fighting games.

@BeamerTime354 11 ай бұрын

Can’t wait till the hall sensor sticks start drifting 🤣

@martinsamuelsson2322 11 ай бұрын

Did you lower the sticks deadzones?

@hartsymk1 11 ай бұрын

This is less a mod for stick drift but more a mode to eliminate the stick deadzone completely.

@randomobjects3491 8 ай бұрын

Hi , have you tried installing blizzard on steam deck, is there any performance difference between cold war from steam store and directly from blizzard on steam? Thank you.

@GoofyPoptart 11 ай бұрын

I've had my set for a month now the non solder, I don't ever get drift (knock on wood) I bought them just incase and so I'd already have them on backup.

@haughtygarbage5848 11 ай бұрын

Do they have extra resistance comapred to OEM? I bought guilkit's sticks for switch and had that happen to me. Convinced me to only switch to Guilikit when the drift started happening, not before

@RetroGameCorps 11 ай бұрын

No extra resistance on these, they feel the same as the originals.

@DrexAW 11 ай бұрын

9:26 hard to get stick drift if the base deadzones are 8000 if i put it down to 1000 i have stick drift on my brand new steam deck would those sticks get rid of that stick drift?

@cesarbonsai5331 7 ай бұрын

I just bought a steam deck in Mexico but the Y axis does not work (up and down movements) and I would not like to have to send it for service because I will have to spend on shipping. The X axis works well, the crosshairs, pad and external devices also work well. Do you think that the problem of lack of movement of the Y axis should be solved only by purchasing one set of sticks and installing it or could another part be involved in this problem?...please, if any of you can light me

@-Brunnen-G 11 ай бұрын

I wonder what the difference is between the version A and B sticks.

@thingsiplay 11 ай бұрын

One tip: Use the official Steam Deck case to hold the Deck.

@BrianJones-wk8cx 11 ай бұрын

AWESOME work, as always. PRO TIP: a good drop can also crack those side clips loose … though you may want to just take my word for it rather than trying it at home. Luckily for me, no Steam Decks were harmed in the making this personal revelation. It was an incredibly unnerving experience, though.

@Lol..No. 11 ай бұрын

Would this also fix the left/right joy stick click input? My right stick click input is unresponsive.

@RetroGameCorps 11 ай бұрын

Yes, this new setup will replace the current L3/R3 click buttons too.

@tzkb8742 11 ай бұрын

I'll wait until I need them.

@Idontwantahandle1111 11 ай бұрын

I don't have stick drift but my right stick clicks everytime move it over 45 degrees to the right. It's super annoying and I might get these just because of that annoying QC problem. My right trigger also clicks at the end of the trigger pull (no not haptic feedback). As this was a later Steam deck I'm pretty disappointed with Valve's QC.

@garcia6248 11 ай бұрын

so i try them and have no idea how to calibrated on windows 10.

@izzwizamahjah275 11 ай бұрын

I would swap the sticks if I’m doing a full shell swap and ssd upgrade

@irkandcrew 11 ай бұрын

I thought they were all ready hall sense sticks

@donfrenchiano 11 ай бұрын

isn't it common knowledge that hall sensor sticks don't have stick drift and haven't we known this for a while? Why wouldn't valve go that route originally?