That oven must be wondering why all the air molecules argon!
@Icanfigureitoutintime3 жыл бұрын
The cockles are a blaze with pride my friend! Well done.
@brandonstackhouse96553 жыл бұрын
Bravo sir well done
@paranoidandroid77183 жыл бұрын
Groan. Sir, your pun is my anagram.
@patrickdean97973 жыл бұрын
funny so funny
@youwillneverguess3 жыл бұрын
Get out. 🤪
@milledel3 жыл бұрын
Tony: "No really, honey, these people will watch *anything*. I bet I could even get them to watch 2 minutes of a rabbit eating grass!!"
@sennest3 жыл бұрын
But it's from a collet!!😂😎👍👍
@agenericaccount39353 жыл бұрын
"Organic machining"
@buddersthepuunk3 жыл бұрын
I watched it it was cute... I think Tony's plan is to attach the rabbit to the fly cutter and train the rabbit to eat grass from it so he can fly cut his lawn
@eliworks85493 жыл бұрын
Hell I've had 100 people watch a 10 minute long time lapse I posted.
@jonpierce83423 жыл бұрын
@@eliworks8549 printing time lapses are entertaining. Watching all the structure being formed. Fun stuff. Now if more people would watch my video of a pseudoscorpion peeking out from a chanterelle mushroom that would be nice... maybe everyone is pretending not to be fascinated by him?
@petergriffin95543 жыл бұрын
TOT: "Ya see that how gross those parts are? No one wants parts like that!" *Blacksmiths have left the chat.*
@CodyDWorks3 жыл бұрын
unfortunately it's true. first smithed "s" hooks I sold was out of some 1/4" stock that had been buried behind a buds shop for 10 years and she loved them and had to have them all pitted to hell.
@manputty9333 жыл бұрын
Yeah I felt attacked lmao
@adrianwilliams7633 жыл бұрын
Looks like the case of the oven is actually made from Undrillium.
@MaximilianonMars3 жыл бұрын
@Peter smith and steel is heavier than feathers.
@andrewlockwood61023 жыл бұрын
@@MaximilianonMars but only if you have a pound of each.
@daviddroescher3 жыл бұрын
On top of it's heat-treated it is a heat treat oven. once it turns you need something to cut through the hardness.
@jpkatz14352 жыл бұрын
TOT needs the Hardness Standards table for the different grades and types of : Undrillium, Unobtainiaum, Toosoftium, Badstuffiaum. I'v got one SOMEWERE in my old Gerstner box.
@SilenceDogood763 жыл бұрын
Why do I get the feeling that this whole video was just a sneaky way for TOT to show us his new rabbit?
@ShainAndrews3 жыл бұрын
trick... you forgot trick at the end.
@bradleystach62753 жыл бұрын
It’s got me worried that the kittens were made into stew! 😱
@surenoblack26583 жыл бұрын
Before it went I to the oven?😳
@greeceuranusputin3 жыл бұрын
I wanna know how it came out white.
@microbuilder3 жыл бұрын
@@bradleystach6275 Worse yet, where'd he pull the kitten from??
@UrbanWildCat3 жыл бұрын
Those must be “collet greens”.
@TheM7503 жыл бұрын
Get out.
@duckslayer923 жыл бұрын
Lol I'm dead
@NeilHendin3 жыл бұрын
Well played. well played indeed. :)
@JBAutomotive7943 жыл бұрын
Most indubitably
@Icanfigureitoutintime3 жыл бұрын
GODDAMMIT
@davidoberle90233 жыл бұрын
The flywheel cutter explosion scared the rabbit out of me...
@dmbworks80943 жыл бұрын
mine to but it wasnt expecting my pants to still be on!
@EASsirenVids013 жыл бұрын
I saw this comment RIGHT before the explosion 😂
@trevorvanbremen47183 жыл бұрын
Same - although MY new 'pet rabbit' is browner... And smells funny
@kingarthurthe5th3 жыл бұрын
Why was there a rabbit in you? ( ͡° ͜ʖ ͡°)
@mrimmortal15793 жыл бұрын
@@kingarthurthe5th I think the more important question is this: Why is there NOT a rabbit in you?
@ElementalMaker3 жыл бұрын
Man the rabbit really stole the show 😁
@mal2ksc3 жыл бұрын
Especially since he literally just pulled it from his ass there...
@Pitchlock82513 жыл бұрын
It’s now the baby bunny show.
@johnkruton97083 жыл бұрын
How come the rabbit wasn’t a brown bunny?
@mal2ksc3 жыл бұрын
@@johnkruton9708 Without getting too graphic, I think the saying is: With enemas like that, who needs friends?
@modifiedmetalworks48923 жыл бұрын
It sure made my daughters day!
@ivo2153 жыл бұрын
Judging by how clean that bunny is, it may not have been the first take.
@philanderingwhitecollartra82813 жыл бұрын
and how many rabbit does it take ?
@Scofflaw_k103 жыл бұрын
You’ve never heard the one about how the bear asked the rabbit if he has problems with...stuff...sticking to his fur?
@dannyl25983 жыл бұрын
@@Scofflaw_k10 that's funny, it made me think of the same joke.
@drabbitz23193 жыл бұрын
Nah. We have something better but similar to what you guys call a perma-coat or something. Always squeeky-clean... ;P
@SubTroppo3 жыл бұрын
@@Scofflaw_k10 "One day down in the jungle" is how I start to tell it, and it is the the only joke I tell. Works best in mixed company.
@RonCovell3 жыл бұрын
My favorites - pulling the rabbit out of your butt, the flycutter causing an explosion, and the rabbit eating grass accompanied by threatening music. Tony, you never fail to surprise me! Oh - and the oven seemed to work pretty well, too.
@johnpossum5563 жыл бұрын
It reminds me of the Jim Carey movie where he makes the monkey come out of the guys butt.
@yetanotherdan3 жыл бұрын
I hope he puts that poor rabbit back where he got him from.
@AMATISIG3 жыл бұрын
兔兔神作
@honthirty_3 жыл бұрын
I bet Ron Covell could make one of those tool holer racks using 'Rollation' and the hole drawing tool like in the bomber seat. I would watch that.
@carlthor913 жыл бұрын
@@yetanotherdan Do his kids know the old man is doing experiments on the bunny, in the garage?
@PFoxen3 жыл бұрын
With this video, you increased the audience in this house to 3x its original level! My bunnies actually sat and watched the last two minutes without hopping away, now they want to know when they can have collet greens of their own.
@hydrojedi3 жыл бұрын
Good to see someone out there still using one of those vintage dot matrix 3D printers. I have an old coal fired printer from the late 1800's...it was a barn find...struck gold that day!
@pulipubplass49423 жыл бұрын
Finally I found another guy who puts his fly cutter in his cordless drill for squaring work on the go
@michiganmoto76873 жыл бұрын
I use my fly cutter in my Yankee Screwdriver. Makes a super fine finish.
@philanderingwhitecollartra82813 жыл бұрын
must have been a shipwright.. i found an old shipwright level once the bubble vial helps if it gets dropped..
@Convolutedtubules3 жыл бұрын
Use it on the fly so to say lol.
@DavidLindes3 жыл бұрын
@@michiganmoto7687 When I was first exposed to a Yankee, I was blown away... I still kinda want one. Perhaps one day I'll make that happen.
@SamSamuylik3 жыл бұрын
@@DavidLindes I got one at a yard sale, works but I never use it, just a novelty piece I guess. You can find plenty at antique stores or eBay, they'll cost a pretty penny though
@DavidGuyton3 жыл бұрын
It's true argon is heavier but if you flip the oven upside down it nullifies the effect.
@Qardo3 жыл бұрын
Don't do it! It caused my oven to float away!
@Sharpman763 жыл бұрын
Gonna asphyxiate the Australians if ya ain't careful
@mikegoetzdroneshots84833 жыл бұрын
These 3 comments are the greatest!!!
@solid198413 жыл бұрын
not upside down....
@ArmchairDeity3 жыл бұрын
It’s the same reason cats always land on their feet and peanut butter toast lands sticky-side-down... unless you duct tape peanut butter toast to your cat. They you’ve achieved neutral buoyancy in air at sea level. Congratulations!!
@shadhussain65553 жыл бұрын
I just want to give this man a hug everytime he makes a joke.
@andyharris88192 жыл бұрын
TOT's fingerprint removal tool at @10:22 made me cry from laughing so hard! I know it's almost a year later, but I STILL come back to watch this video for a laugh.
@RoamingAdhocrat3 жыл бұрын
The idea of a fly-cutter in a handdrill made me laugh out loud.
@StyxHackshop3 жыл бұрын
yeah that one got me good
@zorktxandnand37743 жыл бұрын
Requires a bit of a steady hand, but do-able. No realy!
@bcoit553 жыл бұрын
I've had some spade bits try and simulate how that would feel
@GogogoFolowMe3 жыл бұрын
I've accidentally made one while trying to drill a steel bar, I lose grip and this fucker was spinning. Almost lost a finger
@AHustleIsLikeASideOfFries3 жыл бұрын
I told my wife, he's easily the funniest machinist I've ever heard.
@mymechanics3 жыл бұрын
Wrapping parts in stainless steel foil for the hardening and quench will keep the scale away. The parts don't even turn black.
@bradleyturek3 жыл бұрын
I was watching thinking, "Huh, my mechanics never seems to have scale." Now I know why!
@mattmanyam3 жыл бұрын
You can negatively effect the quench, if you don't remove the parts from the envelope first (depending on your particular requirements)
@morkovija3 жыл бұрын
I vouch for this random stranger from Switzerland to know what he is talking about!=)
@maxegloff30013 жыл бұрын
lol du kommst aus der schweiz??
@lifuranph.d.94403 жыл бұрын
@@morkovija Yo, I’m not Swiss 🧀, but 1.25 works for me!
@Dunkopf3 жыл бұрын
The argon is heavier than air. It's leaking out of the oven through the steel casing and door. I recommend putting the oven door up if possible to reduce leaking. Otherwise increase purge cfh. Source: Professional pipe welder
@joons33743 жыл бұрын
@@froop2393 It sure as hell cools down quickly too... and transfers it's heat to the air causing air to become lighter... overall keep in mind the diffusion usually argon just like any other gas will just disperse in air and you will merely start suffocating because the concentration of Ar is Already to high in the whole room... besides Argon is already in the air, it is just that the concentration is very low... I'd just be sceptical and take every precaution possible, most importantly install an active ventilation system in your garage...
@gunner45442 жыл бұрын
An iron worker would just weld the door shut
@calebmcintosh012 жыл бұрын
Why not change how the over is oriented? Like with the opening upwards, like a foundry. There is nothing preventing this aaaaand once it is filled with argon....it just stays there.
@andrewthompson57363 жыл бұрын
When we use nitrogen to inert vessels in the oil industry we apply the gas from the bottom and vent the oxygen from the top. You an always check this in your application by putting a lite Match into the vented gas to confirm you are getting no more oxygen in the vent stream. No we don't use this test method in our industrial applications
@byjingobob3 жыл бұрын
You got me with the exploding cutter gag, made me jump!
@maxspruit83703 жыл бұрын
Me too. It startled me.
@karroome3 жыл бұрын
Yup,,, same here
@TrevorDennis1003 жыл бұрын
Blimmin heck! Just a bit!
@chrisprobert63 жыл бұрын
Yep nearly brown 🤣
@unr3al673 жыл бұрын
I've been working as a knifemaker a few years back and we also used Argon to flush the chamber. From my experience there shouldn't be any damage to the surface layer at all. All we used to get was a thin matte grey oxide layer and no pitting to speak of. This was easily removed with a few strokes of 400-600 grit sandpaper. This layer would be tough but thin and you could still see the satin finish from before trough the oxide. I think time is of the essence here as the oxidation starts as soon as you open the oven door and the atmosphere disperses. Just move a bit quicker next time. Also I'd set a higher flow rate and maybe you should replace your oil as it seems to have a lot of gunk in it which immediately bakes onto the part as soon as it touches it. If you're not using proper quenching oil yet, try to get some that's specifically made for heat treating. I'd also stay away from Nitrogen and just use the Argon. With Nitrogen the oxide layer always seemed to be a lot harder to remove given the same parameters as with Argon. I can only guess but I think the outmost layer got partly nitrated in the process which may not be a wanted side effect...
@briankelly57313 жыл бұрын
This was my thought also. You could crank up argon flow right b4 you take the part out and have your oil right at the door. As an alternative I'm going to purge my shop with argon completely be for removing the tool from the oven. I love all your videos TOT. I'm feeling kinda sleepy, I think I'll take a nap in the shop.
@alext.73133 жыл бұрын
To add to the whole proper quench oil idea, also keep in mind that some steels want a heated quench media.
@unr3al673 жыл бұрын
@@alext.7313 AFAIK most tool steels do. When doing critical stuff we'd usually prewarm the oil to around 200°C. This also reduces warpage and probability of cracking.
@unr3al673 жыл бұрын
@@joenicotera2991 Proper Nitration happens at 500-550°C, so at those high temperatures it's merely an uncontrolled side effect. When done properly your part shouldn't look hot forged at all but just have an even greyish coating all around. For the parts i usually do i can still fit precision ground pins to holes that were reamed at max. 0,01mm bigger without even cleaning them up. And no, a nitrated layer isn't always wanted, especially when you need your part (f.e. a knife) to conform to certain characteristics (e.g. toughness, brittleness, edge retention, etc.).
@alext.73133 жыл бұрын
@@unr3al67 I can say that, to my experience heat treating a wide swath of different steels, it's close to 50-50. In fact there are many steels that want to air cool after hardened. To make it more interesting, some require some intense heat mapping to air quench properly. (Ie slow ramps down, weird stepped ramps with plateaus, etc...)
@christopherlillja84922 жыл бұрын
Many years ago I worked in my grandfather's tool & die shop and we would wrap the dies carefully in stainless-steel foil before they went in the oven for heat treating. They were still slightly discolored, but when they were unwrapped they had NOTHING like the scale I saw in the last video when the tool steel goes in naked. This argon mod is awesome, but the old folks knew how to get stuff done too.
@andrewwolf44302 жыл бұрын
I regularly use A2 and I either wrap them in stainless steel foil or bags. If I do it well they come out nice and bright. A2 is an air cooling material. I leave them in the bag and before tempering in the kitchen oven they are at 62 to 65 HRC
@pontiacg445 Жыл бұрын
That's how I learned to do it, with an added chunk of paper in the bag so it burns up and consumes all the o2.
@mattgies3 жыл бұрын
One mill makes you larger, and one mill makes you small And the ones that Mother gives you don't do anything at all
@customhaines25103 жыл бұрын
I had a white rabbit joke forming in my mind when I saw this. Yours is far better than the crudity I had in mind.
@mattgies3 жыл бұрын
@@customhaines2510 Remember what the dormouse said: Feeds and speeds! Feeds and speeds!
@mattgies3 жыл бұрын
@@customhaines2510 Although on second thought, the rabbit would probably appreciate some crudités.
@burtbacarach50343 жыл бұрын
And if you go chasing rabbits,make sure you have collet greens to them.
@greganderson83743 жыл бұрын
Epic Reply, just Epic!
@ClayMann3 жыл бұрын
I've never machined anything in my life and probably never will. I still love this channel. I feel I'm learning things I can use later to tell other people that know more than me how they're wrong about machining but also I always come away smiling from these videos. Just thought I'd throw that in there among the pro's and machinist crowd talking shop.
@AlphaPhoenixChannel3 жыл бұрын
I'm not sure I've ever wanted to see an audience retention graph from another channel more than the last two glorious minutes of this video...
@Gamerock823 жыл бұрын
Very bunny... quite the rabbit hole, though.
@TheConjurersTower3 жыл бұрын
I was thinking the same thing.
@TheRobberdotcom3 жыл бұрын
You've got hardened scrapbinium, and a heat treat oven. Why didn't you make the first part into annealed scrapbinium?
@jaredknapp88863 жыл бұрын
I just posted this comment. So true.
@georgedennison33383 жыл бұрын
Someone once told me the key to making being human easy is make your screw ups look like you planned them. You didn't run out of printing 'ink', you planned on two tone legs. In that vein, I went looking for drill stops by ordering shaft clamps. The secret to my research was I ordered a bunch of shaft clamps by the OD, thinking it was the ID. As I was putting away the much too small shaft clamps, I noticed just how much they looked like the set of 'drill stops' I had bought from China via eBay 4-5 years ago. What put a smile on my face was discovering the price of the shaft clamps was MUCH cheaper than even the drill stops when I compared the sizes in the set. I love it when a plan comes together; even when I had no plan. GeoD I bought the cheapest, single set screw, no split, Blk Oxide coated steel shaft clamps. You could go 'show boat', and buy SS shaft clamps.
@DanVR0013 жыл бұрын
Imagine being at an event and seeing a pair of floating hands. By the way, I'm surprised that rabbit wasn't brown.
@dgmedvedev3 жыл бұрын
That's hillarious
@B-M.B3 жыл бұрын
The Magic of WD-40! Or post-editing 😁
@Mishn03 жыл бұрын
Like that old joke: A bear and a rabbit were taking a dump out in the woods. The bear asks the rabbit, "do you have problems with poo sticking to your fur?" The rabbit looks up and says, "uh, no, not really..." The bear wipes his butt with the rabbit and walks away.
@somebodyelse66733 жыл бұрын
Note that the bunny is on a scotchbrite pad. It takes some work, but you can eventually get through to the base white rabbit. Necessary to get a good surface finish for bluing, of course.
@frijoli95793 жыл бұрын
@@Mishn0 still funny years later dad.
@svtirefire3 жыл бұрын
"scrapbinium." I'm gonna use that one.
@apburner13 жыл бұрын
Believe it or not, I'm walkin' on air I never thought I could feel so free Flyin' away on a wing and a prayer Who could it be? Believe it or not it's just me
@AHustleIsLikeASideOfFries3 жыл бұрын
Oh man! Sentimental overload! Haven't thought about that show in a very long time.
@Fat_Ninjah3 жыл бұрын
4:30 That's a deburring tool! I used those when T was in my training workshop at school!
@moiquiregardevideo3 жыл бұрын
Tony said a nose or ear trimmer... As a joke. But i forgot the name of the tool, so thanks to be the only one to help.
@sjaakspaak3 жыл бұрын
@@moiquiregardevideo here we call it a monkey tail
@GoodDeal1233 жыл бұрын
I'm still wondering if he was being funny or did not know for real. I could not believe I actually knew what it was, considering I have about 0.5% of Tony's knowledge...
@RoderickGMacLeod3 жыл бұрын
"...so lets make something!" TOT proceeds to heat treat the chips.
@TheFamine1233 жыл бұрын
It's funny you mention a "rotating hot end" for a 3d printer that's actually something I've been working on for awhile now, specifically to allow different materials/nozzle sizes/ temps/etc. Basically a microscope end, just with E3D V6 hot ends instead of lenses.
@marsniper273 жыл бұрын
It is a cool design can't wait to see you finish it.
@benjaminwatkins73453 жыл бұрын
I've made a couple 3D printers with multiple hot ends for different colors flavors etc
@marsniper273 жыл бұрын
@@benjaminwatkins7345 ya there are multiple ways to do it I just haven't seen one like what he is working on. And it is almost exactly what Tony describes.
@travismiller55483 жыл бұрын
Tool changer mods are a thing now
@Chrisknot943 жыл бұрын
Makertech3d sells a switching hotend but the reviews aren't that great - and the switching with that one is only on one plane. Repeatability and calibration is a huge hassle. There's some nice manually operated options though, xChange being the one that comes to mind first because it's a commercial product (kickstarter) but there are many opensource solutions on thingiverse and the like. For fully automatic toolchanging, the e3d toolchanger / jubilee3D seems to be state of the art atm. Their couplings are being ported to different platforms by the community. Also a hassle to set up and calibrate but very precise and repeatable.
@thomasdickson355 ай бұрын
The idea that technological innovation has taken an object that could be made of wood in 15 minutes to 27 hours, not including the design aspect. What a time to be alive.
@thomasdickson355 ай бұрын
Also you could have purchased a child's step stool and drilled or melted holes in it. BUT, it's not about the journey or destination, it's about buying more tools.
@opticalmechanic3 жыл бұрын
Aah, quality time in the garage can’t be beaten. I could do with a 3D printer mainly to make a replica of myself so that I can leave that at work and spend more quality time in the man cave! Thanks for the instalment. You know we love ‘em!
@chasendeltapilotdude3 жыл бұрын
This old tony has officially become a major part of my life. And he doesn’t even know me.
@aerogfs3 жыл бұрын
Or does he?!? "insert suspense dum dum dum thing here"
@Whitnesia3 жыл бұрын
@@aerogfs and maybe we've all become a part of his, and he doesn't know us! Dun du dunnnn
@shadowgolem91583 жыл бұрын
Trust me, we are all much better off with him. That Other Old Tony is more frightening and creepy than the rabbit! (He has a goatee so you can tell he is the evil one.)
@BinziKORG3 жыл бұрын
Notice me senpai!
@BinziKORG3 жыл бұрын
I don't even know what he's talking about 95% of the time. I'm just here for the jokes.
@istalrivaldr4993 жыл бұрын
This Old Tony petting a bunny may be the most wholesome thing I've seen on this channel
@JohnADoe-pg1qk3 жыл бұрын
Well, there were the cats. Where are the cats???
@drabbitz23193 жыл бұрын
@@JohnADoe-pg1qk We took them, ages ago, and you're asking NOW? Really?!? Once we've replace those punny cats with one of ours? Really?!? We did ask for a reward too you know? But no one answered. So, we sold them to SIr SIc. ;)
@Hypercube93 жыл бұрын
I probably shouldn't mention that he's actually petting his butt hare on camera then!
@drabbitz23193 жыл бұрын
@@Hypercube9 Well, in a way, he is. But, to mention it or not is your choice.... Lmao!
@TubeUnderdeveloped3 жыл бұрын
My favorites talk show. Ever, I think. Even I am not good enough in English. :-). From another country and still on earth. Have a nice day. Keep safe.
@OneShotAwayy3 жыл бұрын
Man... Out of all the infinite worlds out there in the multiverse, I'm really glad ThisOldTony decided to make these AMAZING videos and upload them to youtube! Thank you good sir for putting all the hard work on these videos full of useful information that are still incredibly hilarious!
@rbmatheny3 жыл бұрын
You should do a gag where you're still wearing work gloves and they make your voice sound muffled
@recklesstim3 жыл бұрын
Plot twist, the bunny is named argon and This Old Tony will be cooking with him later
@hazzalandy3 жыл бұрын
Mmmm, rabbit pie
@FCleff3 жыл бұрын
The bunnies name is actually Stew. ;-)
@willasproth3 жыл бұрын
No the rabbits the chef
@NaterNorris3 жыл бұрын
In the oven
@drabbitz23193 жыл бұрын
The video is literally called "Noww, we're cooking WITH Argon" Peeps in the comments are suggesting "cooking Argon" which is NOT the same! smh... lol ;)
@obfuscated30903 жыл бұрын
That Noga pen attachment is obviously a deburring tool (and takes standard Noga replacement tips). Welding tip: Since you'd only be doing this if you already have argon for TIG, you can buy a Western CGA 580 tee and another flowmeter to use for weldment purging then use fittings of choice to connect green hose (your local welding supply sells it cut to length) to your oven. Make the hose with standard fittings and make it long (hose is cheap). That lets you not only connect easily to your oven, but place your argon cylinder anywhere you like instead of wheeling around on your welder. It's much more convenient to have cylinders chained to the wall or on their own cylinder cart.
@54Mizery3 жыл бұрын
Just a tip from someone who made a living from welding argon purged stainless steel piping and vessels. Always introduce argon from below and allow the air to vent out from the top. You get a much cleaner purge. You can get away with lower purge rates which saves argon costs as well.
@misfitsailor3 жыл бұрын
Our rabbit graduated from eating collet grass, he now has his greens served in a ten inch 6-jaw chuck. True story!
@Hypercube93 жыл бұрын
The rabbits in my backyard only eat O2 sensors and various wires.
@dannyl25983 жыл бұрын
@@Hypercube9 so now I know what kind of critter ate my o2 sensor wires. Thanks
@stephenmoulton92843 жыл бұрын
@@Hypercube9 are they covered with long point hairs ? for that variety also eats radiator hose's >can you imagine emerging from hunting camp hundreds of miles from a auto parts store ,and as cold as it might be , you have no coolant left ?
@alanchambers87623 жыл бұрын
Watching the bunny at the end I could only think “the bones man, the bones”. I was waiting for the holy hand grenade.
@mitchellfolbe87293 жыл бұрын
Then shalt thou count to three, no more, no less. Three shall be the number thou shalt count, and the number of the counting shall be three
@jeffwood81093 жыл бұрын
I think the Holy Hand Grenade is currently on loan to either Clickspring or Abom...
@travismiller55483 жыл бұрын
I told em, but they never listen
@clonkex3 жыл бұрын
"One! Two! Five!" "Three sir!" "Three!"
@yohoyoho133 жыл бұрын
Alan Chambers I thought of "Night of the Lepus".
@MyLonewolf253 жыл бұрын
0:46 learn to play with slicer settings and feed and speed Optimizing your head speed, extrusion hight, etc greatly helps print time as well as not sacrificing fidelity by increasing nozzle size Also you’re not gonna completely get rid of scale unless you’re going to keep it in a completely inert atmosphere including quenching but you’ve definitely helped a lot
@andrewgillis30733 жыл бұрын
Very amusing. Tony should teach at a community college. An old blacksmith's trick for small parts is to cover it in a borax slurry. The slurry will dry out in the oven, and when you quench the part, the thermal shock will get rid of the borax. ^_* It only works for small parts, though.
@drain_0013 жыл бұрын
The explosion literally made me jump.
@dragon1114093 жыл бұрын
Yeah i thought for a second tony was going to the ER lol.
@grahameida71633 жыл бұрын
Likewise, headphones can be a bad option 🤣
@WeldinMike273 жыл бұрын
Totally got me
@thedude77263 жыл бұрын
Same i spit out my beer
@sblack483 жыл бұрын
Dirty trick! 🤬
@TheFabricatorSeries3 жыл бұрын
Where the heck did you find a Dot Matrix 3D printer?
@philanderingwhitecollartra82813 жыл бұрын
ok boomer
@m0llux3 жыл бұрын
Probably at a doctors office. Thry still havs thise, probably.
@ArmySigs3 жыл бұрын
@@philanderingwhitecollartra8281 Boomers are 60 and over now, I think you need glasses buddy. BTW this guy has a great YT channel, what have you accomplished in life, apart from getting RSI in both wrists from being a total wanker?
@sansdecorum46003 жыл бұрын
Good to see you here, Justin. Like your work, too.
@N.Cognito3 жыл бұрын
Planet Druidia.
@vandalsgarage3 жыл бұрын
Closing in on one million subscribers. Good for you, Tony.
@Golgi-Gyges3 жыл бұрын
That humorous sarcasm is what made me suscribe. It makes for a more entertaining watch.
@PoignantPirate3 жыл бұрын
Since argon is heavier than 'air', most of it is going to flow out of the oven as soon as you open the door. Nitrogen will take longer to do that (since the air is mostly nitrogen), so you may get better results with the other gas. Honestly, I've found that laying the oven on it's back with using gas helps the results, since opening the top doesn't let the purging gasses fall out onto the floor.
@HitoPrl3 жыл бұрын
Argon is heavier than air, but it is fairly hot inside the oven, so maybe it is actually lighter than air in this case?
@marcgoodman48623 жыл бұрын
@@HitoPrl Just heat the shop to 1500F. Problem solved.
@Migman20203 жыл бұрын
@@marcgoodman4862 least he wont have to worry about a covid infection if he somehow heated his whole workshop that hot )
@michiganmoto76873 жыл бұрын
Science
@kasparroosalu3 жыл бұрын
@@HitoPrl It Is. Convection will take care of the inert atmosphere the second you open the door.
@nicholasviney59753 жыл бұрын
The worst part of 2020 was the lack of ToT vids, save us Tony more vids plz
@quentinreid31113 жыл бұрын
i laughed so much at the explosion, it was so out of nowhere.
@metacollin3 жыл бұрын
Hi, fair warning: The E3Dv6 hotend used by the Prusa MK3/S is close to being flow rate limited (cubic mm of plastic extruded per second) for thicker layer heights even with the 0.4mm nozzle, so with larger nozzle sizes, that is the bottle neck and will prevent you from deriving a good chunk of the speed advantage you could be from larger nozzles. But I am very impatient and an instant gratification enthusiast (who isn't?) so here is how to get around that, and some other tricks to reducing print time by a few fold: 1. Get an E3D volcano hotend. It screws onto the Prusa heatbreak and uses the same heater cartridge and thermistor, so it is a drop-in compatible upgrade. You lose a few mm of print height and you'll need to print a fan nozzle adapter to lower the outlet slightly (there are literally dozens of these if you look for volacno prusa mk3 on thingiverse - and you can print fine for the most part without it anyway). You'll want to get some nozzles for it too - 0.2mm to 1.2mm sizes are available. More importantly, the Volcano increases your maximum flow rate by 2-3x, which for layer heights and wider nozzles will cut print time by a half or third. Just make sure you increase the 'maximum flow rate' setting in the filament settings in Prusa Slic3r. The settings included are tuned for the wimpier E3Dv6. I've been using a volcano exclusively for years and besides a mostly negligible z-height loss, there isn o downside. It's just better. 2. Strangely, I never see much about this trick online but its a vital knob one can tune for 3D printing: extrusion width. Meaning, you don't need 0.6mm nozzle or even an 0.8mm nozzle to print line widths that wide. The only true limitation with nozzle radius is layer height. You always have to print layers slightly thinner than the radius of the nozzle (so 0.35mm is the max for 0.4mm nozzle). But when it comes to extrusion WIDTH, you can generally print up to 250% the nozzle radius without problems. If you look at the nozzle, there is a flat surface where the filament bead comes out, and that feature limits the line width (as this surface is what flattens the bead as the print head does an extrusion move). So you can print 1mm line widths no problem with a stock 0.4mm nozzle, and often you can go slightly wider but you start getting into the tolerance territory for the width of that feature so above 250%, ymmv between nozzles. I like to print with 3-4 perimeters minimum for strength, so a way to get a ton of speed improvement with little to no detail loss is to increase the line width of solid infill, infill, and perimeters while leaving the external perimeter width the default 0.45mm or whatever it is. Also, using line widths 1.5 times the nozzle diameter and wider tends to improve layer adhesion, especially for certain filaments like polycarbonate. The bead has to spread out and is thus smooshed against the previous layer with more pressure, and it is heat AND pressure that increases layer adhesion. 3. Not a tip per see, just a caveat: you'll want to bump up the hotend temperature when printing at 20-25+mm/3 flow rates with the volcano. The rule of thumb I use for most filaments is increase print temperature by 3°C for every mm3/s of additional flow rate above 15mm3/s. So for 30mm3/s, this means 30-15=15mm3/s * 3 = 45°C. So for a print temp of 210°C, this results in 255°C. This probably sounds really high for PLA, but when you're ripping that sweet sweet lactic acid out at 30mm3/s and you can see the spool just spinning continuously, it won't seem that hot anymore. The filament is spending so little time in the hotend that it is never actually reaching that temperature, the extra temperature is to heat it up faster so it still hits in the ball park of the intended print temperature by the time it exists the nozzle. If all of this sounds like it might have a fairly serious negative impact on print quality.... it really doesn't. And you can really tweak these knobs without adjusting anything else and it really does generally just work. Obviously you will have the normal changes from thicker layers etc. but using these tricks won't really have an impact on quality beyond what you'd get anyway, and if for some reason you do, just back off the flow rate a little and you should be good to go. Final double secret tip: if you're really nuts, E3Dv6 also makes something called the Super Volcano that is also compatible with the MK3/S. You will lose a lot of Z height but I mean, its a hotend that is undeniably what you get when you take the thermal limitations of print speed to its logical conclusion. The nozzle size goes up to 1.75mm (so, literally the filament diameter lol) and, well, just look at them. If you need all the flow rate in your hotend, these nozzles will put it all up in your hotend. ALL UP IN IT: metacollin.com/s/hvOxXgoUR02s.png
@brianhaygood1833 жыл бұрын
I'm only disappointed the printed tool holder doesn't have "Maholder" embossed on it.
@ClannerJake3 жыл бұрын
CNC engraving and backfill with grey... it would match the feet.. have it lurking in a shot somewhere for only the astute coinsures... only it will say "subscribe" for some reason..
@Steelcrafted3 жыл бұрын
"Hello everyone this is YOUR daily dose of internet.....This KZfaq machinist let a bunny eat grass from a machine collet...."
@sephalon13 жыл бұрын
ER32 I believe
@joeseabert83913 жыл бұрын
My grandfather was a mechanical engineer and a boilermaker, when I stayed with him he had been retired for 10 years and had lost all of his ambition to get things done quickly. He had me make a part using some scrap stainless steel he had in a bucket. While I toiled trying to get that damn drill to cut the stainless he watched laughing literally out loud at me but wouldn’t tell me why. When lunch time came and we had some chicken fried steak he finally told me to slow down the drill and the stainless will cut like butter. I looked at him like he was bullshitting me but when I tried it, he was right.
@helicrashpro3 жыл бұрын
When you said you where running a homemade fly cutter with a home heat treat and running it in the mill when full hard, made me think it was going to be catastrophic so the explosion really got me.
@oldUmanUshea3 жыл бұрын
Next project: Tony makes a second camera.
@robotnicw3 жыл бұрын
"Buys" a second camera. Too many un-ToT components in a camera. Of course, he could always make a camera stand!
@LordPhobos65023 жыл бұрын
On the lathe.
@MrDoroh3 жыл бұрын
"Honey, I need a live a rabbit for a 1 minute gag"
@prototype3a3 жыл бұрын
" try not to choke on the hare "
@kevinmcenhill26563 жыл бұрын
Three minutes. There's two extra minutes in the end credits.
@ihdieselman3 жыл бұрын
@@kevinmcenhill2656 The rabbit's agent said that there'd be no deal unless he got at minimum 3 minutes of screen time.
@TheStuartstardust3 жыл бұрын
..3 min screen time OK - but sitting up the a** of tot the first 12 min to get to that? Pretty shitty agent..
@jordonbrewer23543 жыл бұрын
How is it this channel about a fella just dinking around in his machine shop manages to be one of the funniest on youtube? I'll never regret subscribing, man.
@philiprome72362 жыл бұрын
The Hotshot 360 oven became the Subscribe 180 by the end of the video. Very clever! Great video.
@RotarySMP3 жыл бұрын
You are our favourite magician Tony. :)
@besenyeim3 жыл бұрын
I had to scroll down too much to like this comment.
@kugelimgesicht883 жыл бұрын
TOOONIII we have to talk .... To be honest ... I was sad that there was no "shop cleaning and telling storys video" last year for christmas. :(
@mgmnfld31093 жыл бұрын
Just like everything else in 2020, going downhill. 🤔
@greg94033 жыл бұрын
Fingers crossed ToT will give us fans something in January about that.🤞🤞🤞🤔
@kugelimgesicht883 жыл бұрын
@@mgmnfld3109 🤣👍
@alanrachman14803 жыл бұрын
Tony, I'm a big fan, your my favorite you tuber. Being a heat treater from way back I could write a book about this video. I enjoyed it very much and I won't be nitpicky about the technical errors, I know it is all in good fun. By the way Nitrogen will not work as well as Argon. If you would like to hear more I'd love to talk about it, metaphorically speaking of course. I also have a great project for you if you could let me know how to submit it. It would be too long to put in this comment. Thanks for what you do.
@shtotyme Жыл бұрын
The Rabbit bit was so precious, hey you, Old Tony, thank you for making my day better.... Cheers!
@barrishautomotive3 жыл бұрын
That moment of absent-mindedness where you released the smoke from your finger was way too familiar. I have definitely done that. A few times.
@hdezn263 жыл бұрын
Same here . . . but with a soldering iron... I'm usually careful, all the way up to that point too . . .
@Azlehria3 жыл бұрын
I used to have a habit of holding random bits of undercarriage while watching students working under cars. It was never a problem because they were working on school cars; longest they ever ran was the minute to get from the storage lot into the shop. Then one day I ducked under a _customer_ car, right off the road and, while leaning in - grabbed the cat. And that was my introduction to "incident reporting". Yay.
@hdezn263 жыл бұрын
@@Azlehria About the cat. . . I wwas helping a friend remove a cat that had a hole in it and they were prying it while I was cutting it and all of a sudden SLAM! it came off and wack'd me up side the head.... That hopefully knocked some sense into or ouuta me lol... At least the install of the replacement wasn't a issue.
@Aheitchoo3 жыл бұрын
I picked up my freshly welded stainless part last night... Ive been doing this shit for years!
@heyyou51893 жыл бұрын
I am never ungloved at the welding shop.
@smithofthenorth3 жыл бұрын
Those caddy's remind me of the ones the kids used to use for cleaning their teeth at the sink when they couldn't reach it... looking back I should have taken out the tools
@joshsnyder623 жыл бұрын
That rabbit loved those "collet greens"
@-TheRealChris3 жыл бұрын
Thank you for the rabbit eating, that was excellent. Be interesting to see if sitting the oven on its end so the door is at the top makes any difference, it would stop the argon spilling out any gap in the door.
@unchartedexe3 жыл бұрын
I really really appreciate you including all the things that seem to happen to me. Dull drill bits make you question whether you are doing something stupid. Mystery materials end up being incredibly hard to cut etc. This is me all the time.
@GlennChambers3 жыл бұрын
haha, loved the dot matrix printer sounds :)
@htmagic3 жыл бұрын
TOT, that rabbit is a magician - he made the grass disappear! I love your new mascot! I only watched a minute of a rabbit eating grass as I watch 2x speed! lol
@-Deena.3 жыл бұрын
I've seen many vids where the object to be heat treated is just wrapped up tightly and sealed in stainless steel foil? Works a dream and just unwrap and reuse. Blackbeard does it pretty much every time.
@anonymousaccordionist33263 жыл бұрын
10:20 This part so amused me that I repeated it several times and showed my family what I was laughing at.
@phpdreams3 жыл бұрын
"This Old Tony ... now with 100% more Butt Rabbits!" Keep it up my friend.
@plusmanikantanr3 жыл бұрын
"This Old Tony ... now with 100% more Butt Hares" ! There fixed it for ya :'D
Watching so intently, your exploding fly cutter made me jump! Hahahaha. Good on.
@rendermandan28203 жыл бұрын
Scrapbinium!!! Flipping hilarious!
@cw20713 жыл бұрын
I you watched the bunnies all the way to yhe end ToT owns your soul 🥴
@randywl89253 жыл бұрын
I skipped to the end. I was expecting all the grass is gone and just a pile of rabbit pellets.
@honkynel3 жыл бұрын
@@randywl8925 Cheat. Go back and watch it all :)
@randywl89253 жыл бұрын
@@honkynel I'll do that. Everything Tony does is worth watching twice. He is one funny guy. ...a very talented and smart funny guy
@aeiouy802 жыл бұрын
The music choice for the rabbit scene is absolutely spot on!
@helicrashpro2 жыл бұрын
I got the same results when I did this. Better than no argon but seemed like a waste of argon considering the results. I think the issue is most of the argon just leaks out the door. What I did that finally got really good results was to put the parts in a stainless box with a stainless foil over the top with a hole for your argon tube. You feed your argon tube into the box through the hole in the stainless foil. Since argon is heavier, it fills from the bottom and since the top is just covered with stainless foil, the pressure is vented at the top of the box. You don't need very much argon flow for this. You will need to make a handle point on the box so you can grab it with something safe. I welded a bar of stainless on the side of the box that I could grab with my tongs. You pull the argon tube, open the oven door, grab the box and put it on a fire proof surface and remove the foil top and remove the part for quench. The results are close to pro level. Do the quench quickly because as soon as you remove the part from the box, oxygen starts to attach. That is the only oxidation I got with this method.
@MrKavics19773 жыл бұрын
Oh finally. Missed Ya, TOT.
@sjv65983 жыл бұрын
The end is definitely my favourite part of the show. Definitely.
@masteroogway66603 жыл бұрын
Noone gonna mention that he spent 40+ hours printing children's stools with holes in them?
@mumeihozumi84583 жыл бұрын
That's the joke
@r114493 жыл бұрын
This video perfectly demonstrates the advantage of heat treating in molten salt.
@Eralen003 жыл бұрын
I personally love the look of mill scale/quench scale on parts that aren't dimension-critical
@AHustleIsLikeASideOfFries3 жыл бұрын
...the scaley surface as it ajoins a clean, machined section? Unnggghh...
@Eralen003 жыл бұрын
@@AHustleIsLikeASideOfFries I can't tell if that's a groan of pleasure or disgust lol
@karl-artureiskop49423 жыл бұрын
10/10 Amazing video! I love the 2 minutes of rabbit cuteness at the end, all youtube videos should have that. But when will you give us a general update on the maho, instead of showing short zoomed in clips of it. You are my favorite youtuber, machinist, comedian and so much more. Keep up the good work.
@StanleyTinyhat3 жыл бұрын
Stoked to see you coming up on one million subs Tony, keep up the great work, love your videos
@jevs81883 жыл бұрын
Great video, like always. Maybe the source of the scaling is the transition between oven and the oil. I mean, once it leaves the oven it comes in contact with oxygen rich atmosphere, plus the flames when dipped in the oil suggest reaction with O2. Also the oil might be contaminated. Reducing the time by decreasing the distance to the oil and having something to grab it with prepared might help. Also, bubbling argon into the oil might ensure there´s no oxygen at least on the surface of the oil. Best of luck! :)
@filfan20013 жыл бұрын
That explosion actually made me jump 🤣
@Watthead803 жыл бұрын
That bunny was pretty white for where it came from. Tony must have a bidet.
@Dobbin1010 Жыл бұрын
1/28/2023 1:40 PM. I miss your regular posts but I would hold my poop to see your next vid. Thanks.
@eamonia2 жыл бұрын
You have a great sense of humor, man. I always enjoy watching your stuff. Thanks for all your hard work Tony.
@Bobyblingco3 жыл бұрын
The exposition when the cuter made contact actually got me lil
@handsolo19823 жыл бұрын
got me too, i went cold inside
@perfrederiksen45183 жыл бұрын
Me too. I almost pi.... my pants. :-D
@Tenacious213 жыл бұрын
I nearly choked and died at the "**WOOOOOOOW**" part. Hope it didn't do too much damage lol.
@dfailsthemostАй бұрын
Hey, This, I'm a big fan. I thought you'd find it interesting that I went from never being in a machine shop to now running a mill for a living. This was in large part due to your videos. Thanks, I think.
@ThisOldTonyАй бұрын
Very cool!
@egg32582 жыл бұрын
I do a little 3D printing operation where i work. Sometimes I have to print off prototypes as fast as possible. Heres what I do to speed things up: • increase print speed. 100mm/s is quite fast and preserves accuracy and 150mm a second if you are really in a rush. •increase layer height. 0.2mm to 0.5 mm for quick prints.