God that's good!

For coins you generally don't need to go that far. There are many ways to know it's a counterfeit before hand. Plus you would damage the coin with a scratch test which might be just silver plated anyway.

Yay! I can't wait for it!

nilered has done a few with the extractor and the wiki has an awesome gif for the mechanism I can't stress this enought: I WANT MOOoooOoRE love dalitas

good luck

Dude, I was looking on the internet and I can't find a really good video on extracting (if that is a correct term) precious metals from car catalytic converters. Some sources that I found, but I could not verify them said that some of these converters can have 1 to 2 grams of platinum. Cody's Lab here on youtube made a video that found a relatively large amount of platinum in highway dust. Used catalytic converters are relatively cheap at junkyards and I never seen, at least in my part of the world, people looking at them with interest... I even heard that you can buy at my local junkyards catalytic converters at the price of junk metal like aluminium or steel. It would be very awesome to see how much precious metals, and which kind you can extract from these things that sometimes are just sitting around the junkyards.

+Archer Sterling you would cut out the parts with the precious metal and then use combinations of acids to selectively get them into solution then use a reducing agent to get back the bade metal (and then melt it) it's the same principle as Cody uses but you will just have to adapt it to the converters

Not as good as yours i admit. You have fantastic quality! :)

I think both of your camera set ups are pretty good. NurdRage tends to have higher contrast (less glass against white backgrounds), and NileRed has fantastic and unique ways of using glassware to illustrate. (mad scientist lab set ups. :))

Out of curiosity, what is the camera? It's pretty nice. I use the GH4.

FDR-AX100 Looking back i probably should have gotten the GH4. The GH4 can do everything the FDR-AX100 does and do it better for cheaper.

+NurdRage the body alone is less expensive, but you need a lens as well!

lol

@@hgmercury7279 what's that supposed to mean?

@@uxleumas i dont know i dont remember what i thought 2 years ago

SSD Chemical Solution Activation Whatsapp: +8801308685025 We Clean We Purchase Black Notes Any One Universal SSD Chemical Globally SSD,Solution,Chemical,Activation,Powder,Cleaning,Black,+919667037689 Powder Certified with

You would have to dissolve too much of the specimen and, if it is not a pure metal, there is no guarantee that you would get a proportional dissolution. For example, with sterling, the copper is not going to dissolve at the same rate as the silver. And you don't want to use aqua regia on silver, as you get messy silver chloride., which passivates the reaction.

because chemistry ftw

99 problems I guess in this case, a lack of chemistry ftw. :-)

Well, it's not like he blew all that money. He bought platinum, and retains that same value in precious metal, that he can turn back into cash as he pleases. It's like buying stock, versus buying champagne and drinking it.

He played with it then got his money back the seller got a scratched acid smeared coin and probably was out shipping costs and insurance. Kinda sketchy.

Only from eBay

My screen is broken.

true. Magnetic and density tests are non-destructive but a good forger can fool that too using the right type of alloys. The best foolproof non-destructive test i know of is X-ray fluorescence spectroscopy. Unfortunately the instrument for that is a bit beyond the budget of an amateur.

For numismatics it rarely gets to that point for coin dealers. To spot a counterfeit you look for: the strike of the coin, the wear of the coin, the weight, dimensions. You don't want to damage the coin with a scratch even on the rim and even if you do it can just be silver plated. For expensive coins they have them slabbed by companies called NGC, PCGS, ANACS, ICG. They guarantee authenticity and they give a grade.

Many forgers will use the exact amount of silver because they're concerned with numismatic value. Also you should have tested on some silver coins not just bullion pieces. There's 90% silver in a morgan dollar and in US coins that are 1964 and earlier. There's 40% silver in US half dollars from 1965-1970. There's also Canadian coins with 80% or 50% silver. More items to see different reactions.

+hardworker424 The objective of this video was silver testing more for bullion rather than collectors. For a scientist who makes chemicals out of silver, we often buy silver bars and occasionally we would like to know if they're authentic. We don't really care about appearance.

NurdRage If you're using it for experiments and you don't care about the look a surface test is not enough imho. Drill through it, then test it. Generic silver rounds and bars can contain less silver because there's no real accountability. I'm no where near as knowledgeable in chemistry as you are but I do know if the item is 80% silver and you need it to be 99.9% silver there will be problems.

Yes. His test is only valid for a pure coin, whatever the metal may be. To properly test gold or silver with test solutions, you have to put a nick or scratch into to specimen, to get through any plating that may be on the outside. Obviously, you do not want to do this on a specimen that has much value outside its bullion value. As far as I know, all the fakes so far can be detected by careful measurement of diameter and thickness, as well as weight. A specific gravity test would add another data point. These are all non-damaging.

not sure actually, i'll see what i can do. but first lets get this pyrimethamine synthesis out of the way. :)

+NurdRage are you one person as I suspected? or are you a group of people as other commenters were saying (think it came up on another channel), as evidenced by different hands in experiment

It would be also nice to see the process of making Hydrogen Peroxide via electrolysis of Sulfuric Acid and then vacuum destilation to collect the H2O2.

Na2S and HCl wouldn't work since it will give very similar results with other metals too.NaCN and Na2S will be a 100% accurate silver test since it blackens the surface of silver on contact but it would also be extremely toxic though...

+casaverdero not only that. Na2S reacts with HCl pretty powerfully to form NaCl and gaseous H2S. I had to mix these two this year. You know, S2- ion recognition. I just dropped about 1 g or 0,5 g of Na2S to about 15 ml of 0.2 mol/l concentration of HCl. I didn't really expect such a violent reaction, but then i needed to smell H2S. First i tried to do it carefully, but when i realised, that i don't feel anything different, i put my nose closer to the tube. Then the smell got me. Wasn't able to smell anything for half an hour. Oh and you can't use NaCN too. It reacts with any acid to form HCN (lethal gas) and a Sodium salt.

McVidsAndTutorials I'm so suck of wannabe-experts, "I did this once so I know everything". Generating H2S gas is the point, it reacts with silver to tarnish it black (Ag2S). The question is if it happens rapidly enough to be visible. Both HCN and H2S are very toxic, with a similar mechanism of toxicity. But you will never reach dangerous levels of either gas in a small metal test, for two reasons. HCN is miscible in water and a H2S has a good solubility too, only minute amounts should bubble out.

+McVidsAndTutorials I never said mix HCl and NaCN i said Na2S and NaCN.NaCN dissolves gold and forms Na3[Ag(CN)4] then Na2S breaks this complex and forms black Ag2S.This can only happen to silver or gold and since gold has a characterisic color its 100% guaranteed to identify silver.

you are right abiut gold. Not sure about iridium

*dramatic musical buildup, then speaks softly* Run.

Carefully wipe it all up. If necessary, redissolve and reprecipitate.

Why did you say "Could you not" rather than "Could you"? "could you not" sounds very impolite like an admonishment .

Sorry about that, I meant no harm in it

alrighty then, just keep in mind for others in the future. To answer your question: nitric acid also dissolves other metals so it wouldn't be able to tell you that something is silver

monimoni0147 yup man happens all the time! These scammer are getting smarter 😂

Tomato Broth if you kill an animal to get it, it's usually not synthetic. Ivory if you shoot an elephant.

Tomato ketchup u need to learn more

Looks like he bought this: online.kitco.com/buy/3105/1-oz-Platinum-Canadian-Maple-Leaf-Coin-9995-3105

About $1.2k-1.5k(depending on time of purchase) Fortunately the value is stable enough and minting is cheap enough that even if the coin was damaged, he would be able to get most his money back even if scraped.

Like 800 in todays market. Maybe 1000 back then. Platinum cooled off in price.

Not really. It would still have its bullion value - you would just be destroying part or all of its collector premium value.

I just looked it up, looks to be in the 1200 to 1300 USD range.

thanks

Spot Platinum is 1150 USD. $50 over spot is pretty crazy.

thats a pretty normal spot % tho, doesnt take much in the market to change by 50

+Sklin I agree tbh

Not sure if they made 25 Canadian Peso coins in silver.

They are highly oxidizing so they can oxidize all kinds of biomolecules in your body such as DNA. Damaged DNA can in turn lead to development of cancercells.

Hexavalent chromium . It is actively transported into cell, where it causes DNA damage in various ways (adducts, ROS, hydroxyl radicals).

+PieterG159 That is not the mechanism. Example hydrogen peroxide is not carcinogenic.

Could be, I'm not a specialist on this topic after all but I'm pretty sure it has something to do with its oxidizing properties. In general, oxidizing compounds are harmfull to some extent. Hydrogen peroxide might not be carcinogenic but it is toxic for cells, hence its use as a desinfectant.

Wait. If oxidising compounds are harmful, then doesn't that mean the oxygen we breathe is killing us?

Spot platinum is at $1150 so a little above that.

+hardworker424 thanks

About $1300

Ow

That is how I started! Keep reading and studying! Never forget that math is important as well!

Damn, thank you. I thought it was more valuable than gold, guess not right now

+Dan Sullivan I was surprised how much platinum has devalued.

Good question, ask all those silver traders that keep buying copious amounts of this solution. I'm just here to explore the science :)

Of course.

a lot of people do so (and also did so in the past. In preindustrial times you could see people wearing lots of silver and carry a small touchstone around with them for trading purposes), but there are different purities of silver and different alloys that can lookalike on a touchstone, especially if you are not used to using the touchstone (you need to get used to *your* touchstone, others look differently). So its some kind of art, whereas the chemical one is science. Though both methods do not tell you anything about the purity of the silver. Would have loved to see this with common silver alloys

NO, ALL LIES!!!!

What happened to the p-chlorbenzyl chloride?

+Mitchell Fream currently fixing it, it'll be reuploaded with the fixes in a couple of hours

+NurdRage Oh ok :)

+NurdRage can you tell us what was wrong with it? what are the mistakes? jeez i can't wait

LOL, personally, i'd want platinum to be dirt cheap because it so useful for chemistry. Pisses me off that everyone else is using it for worthless things like money and coins... pfft!

NurdRage Yes, I agree. Physical money. Blech... What a worthless use of a limited resource on the planet.

On the contrary, using resources for physical money stores them, whereas using them for something like chemistry or industry effectively consumes them much of the time, depleting that limited resource.

I wish we had copious amounts of platinum. I want it to be as common as aluminum :)

What is better: Having a pound of platinum sitting in a vault Or the understanding of chemical processes that let us further expand our understanding of the world.

As said in the video a scratch test and then using the solution on the scratch marks is better since it causes much less damage. If you're buying silver for bullion then it doesn't matter what it looks like as long as it's real. If you're buying silver for looks then as long as it looks good does it matter if it's fake? If you're buying for both then you need to find a very reputable seller like a mint or a bank whose reputation is above reproach.