NUTSERTS - What not to do with nutsets

NUTSERTS - What not to do with nutsets - SP TOOLS

Рет қаралды 14,693

2 жыл бұрын

Using new tools can sometimes be a bit tricky if you haven't used that particular type of tool before.
Pete at SP Tools HQ explains the proper usage of our nutsert guns so that you can understand the tool better - saving you time, money and helping prolonging the life of your tool.
Check out our range at sptools.com
Direct link: bit.ly/3qbZEcs

Пікірлер: 18

@Molkena27 17 күн бұрын

Can you recommend a good tool for plusnuts and nutsert ? I’m in Australia and building out my van into a camper. Cheers

@chandersharma617 9 ай бұрын

The instructions that come with the tool suggest that it’s adjusted for different thicknesses by controlling the amount of compression. ie. It’s not always say 6mm compression. I think the use of specific rivnuts depending on target thickness is a good idea, but can be very expensive for home workshops.

@ianmoore525 Жыл бұрын

When I insert rivnuts into thicker material , i countersunk the back first, providing I have access to the back.

@jasonstephenson9959 4 ай бұрын

right, bc why wouldnt you want to make the parent metal weaker. ie, opposite of adding a washer

@ianmoore525 4 ай бұрын

@@jasonstephenson9959 convenience, it’s not always about strength. When you have only one arm, this is always a design decision.

@ianmoore525 4 ай бұрын

@@jasonstephenson9959 even without the convenience thing, you might need a strong bracket to do the job and want to attach a light object to it.

@robertbowling8393 9 ай бұрын

I just purchased a nutsert tool, along with a huge supply of nutserts, never understanding that the nuts has to be used according to thickness of material! I was under the assumption that they were knurled to expand (or 'swell' if you will) to grab the diameter of the hole. I'm glad that you posted this! Use of the nutsert tool is obviiusly somewhat more tedious than one might think. Thank you for sharing this information! I'm sure I'm not the only dummy out here! Lol ..... Now, to shop for assorted nutserts that vary in thickness or depth requirements. If you have links for where to purchase such assortments, please advise. Thank you again.

@ianmoore525 4 ай бұрын

If I have to use a nutsert on thicker plate, i countersink the back, assuming you can get to it.

@wayneshephard 6 ай бұрын

Great video, it's not rocket science, they are an excellent tool, mine has done a lot of work and only ever needs a touch of machine oil and popped back in it's box.

@GS_Twan 2 жыл бұрын

Ship to the US?

@383dave Жыл бұрын

Smug attitude at the end turns me off buying any SP tools.

@metricdeep8856 5 ай бұрын

Sometimes people need to be told.....and usually someone gets upset because, for them, knowledge is burden rather than a gift. It's surely stated in the operational instructions also.