Good looks! Phase 1!

are the parts identical to the gs300?

Thank you!

My boy @hedrcxx on IG

Thank you

Yeeeeee

You can get just rear uppers, but unless you have adjustable lowers you might not be able to get a good alignment. Uppers will give like -12 but can’t promise you’ll be able to get toe in spec

I believe they were 18x9.5 +12 or +15 (-7 to -10 should have them fit quite well, and pretty easy to achieve)

@@OCTANEANDZIPTIES what was the issue with needing shortened spindies before flipping the front uca piece?

🤟

Either front upper control arms or tilted spindles. If you want yours spindles done lmk on IG!

It's a self solving problem

I’m sayin😩

Yes, what’s wrong with that?

@@OCTANEANDZIPTIES not the most quality brand as far as the ball joints theyre known to blow out, a homie lost his car cause his rear toe arm broke getting onto a highway sent him into a wall at 45. Godspeed toe arms and camber arms 🤷🏼‍♂️

Had the Q50/Q60 that sent into the wall? I know him as well. Also depends on which generation ball joints, the old ones had to have washers on the top so the ball joints didn’t pop out, the newer ones don’t. Believe me I understand difference in qualities, but nothing wrong with these.

@@OCTANEANDZIPTIES it wasnt a q50 but yes i did hear about that it was on a homie from jerseys subaru wagon. It wasnt even low or static but yea im not hating on your work g you do good stuff. Just dont trust godspeed

I do not believe they are compatible sadly

No sir, completely different designs sadly

Ahaha of course! There will be more 😎

Camera, these were nothing special just videos up and down the street. For all other actual rollers and such both phone and camera, doesn’t make much of a difference tbh

@@OCTANEANDZIPTIES dope, I need rollers but me and my mate have no idea what we’re doing lmao. I have a camera but will probably practice with a phone first. Ty 🤘🏼

No matter what you use, it can all look good, if you have any sort of editing software it never hurts to upload it and stabilize it. That’s how you see so many steady rollers. If not, just try and do your best with your hand/phone. All the same😎

Send them to me like everyone else does and I’ll get you right, shortened/tilted to spec🙌 shoot me a DM on IG @logan_lamb11

My guy 🤝 I’ll reach out lol it’ll be on my ladies ig but I’ll mention I commented on here

Hell ya!

Haha who’s bagged?

@@OCTANEANDZIPTIES the gs430!

Hahah no sir, static. Sorry if the joke went right over my head, I never know with YT comments🤣

-11 with the rear upper and all rear lowers? Keep in mind we took off the rear upper locking nuts for more camber adjustability

@@OCTANEANDZIPTIES only the rear uppers!

Oh word!

Yes

They are actually 18x11 and 18x12. 5in and 6in lips

Yum yum

All the boxes said Godspeed, they are all Godspeed arms

I believe so, gs300/400/430/460 should be the same if made in same years I believe. Probably just check forums furst

@@OCTANEANDZIPTIES okay thank you !!

I got a gs300

Oh nice!

6 rear 5 front

@@OCTANEANDZIPTIES since you were using the fronts in the rears so they were 5 inch lips?

Yes but today we actually put the tears back on with a small slip on so the barrel didn’t hit the coilover and they fit without rubbing. The 5in lips fit with ease

No you

It’s actually really comfortable, not only the seats but the overall ride especially being pretty low is amazing!

@@OCTANEANDZIPTIES I soak from experience. I'm 41, I did all this in like 2003 with a GS300. That camber kit is uncomfortable and terrible overall for tire usage, gas milage, and body frame. But have fun...

The camber kit is uncomfortable? Camber kits don’t differ in ride comfort lol, it’s all adjustable arms. If you’re talking about the coil over spring rate, it’s actually pretty nice. Not too soft but not stiff, especially tucking you don’t need high spring rates. Camber and height (in this sense being low) has nothing to do with gas mileage. Tires are a part of stance and we understand they don’t “last as long”. Body and Frame is completely fine, if you go back and look at some of my videos, I have made my own frames and reinforcement to go lower the correct way. Hope I answered each part of your remark👍 sad a 41 year old man would comment negatively under someone video because you personally don’t like it. Some people just never grow up I guess, have a good one 🙌