I recently saw a video where he had cut the dash square, it liiks fine but sinking it into the dash pad I think looks more like how Ford may have done it if there was an option for a double din, also I like the idea of covering it with the vinyl, I probably will do that myself, just a suggestion though, put a nice padding under the vinyl, it will give a bit more of a high end finish. Hay send me a pic or 2 of the finished product, aintscaredgarage@gmail.com ,Heycheck out East Coast OBS Ford facebook group facebook.com/groups/3628172440747341 I'm trying to get something started over on our side of the country

@@AintScaredGarage Thanks, I'll check out that group and send you some pics when it's done. I was just going to re-do the pad and bought a cracked up dash pad from ebay for $30 to experiment and did my own repairs using Gorilla glue, sanding it down and covered with vinyl using contact cement but getting it to stretch into the inside corners was tough but everything else was perfect. No padding needed, just over the original surface. Then I started looking into din kits and it's either that crappy plastic panel you can buy for $40 that goes over the pad or spend $700 for a custom bezel and custom pad and I want a nice truck but don't want to piss away all that money when I think I can do it for under $100 and have some fun doing it and doing it your way removes the problem of stretching the vinyl into any inside corners. I was just looking for plastic/vinyl spray paint for the bezel and Diupli-Color and SEM have a few variations of RED. My interior is code 'R' which is Ruby red. Would you happen to know which of their colors match the closest to the Ruby?

​@@AintScaredGarageBlue wire with the white line is amp turn on

Well thanks, and thats the thing, I dont have a pile of money ether, but you can still get these trucks reasonable, but I have noticed, they are starting to disappear in the junk yards, so now is time for one as they are going up in value, theirs a big interest in them, as far as this video, there is a company that you can send the doner parts to and they will make this bezel for you from 100 - 300 dollars depending on what you actually buy from them, but I cant afford that, so I made my own LOL, Welcome to the channel

Thanks, you know I'm here in MD we could look at your rig together, email me aintscaredgarage@gmail.com

Thanks I'll be on it soon

Thanks

I did consider the red, I may do it yet, Thanks

Thanks for the compliment

Well thanks, Fiberglass isn't that hard, but you just get one of those kits, or if you willing to spend a little for it there is a company that makes this, you have to supply the donor parts and it's a little pricey, around 100 buck's www.obsinteriors.com/product-page/91-97-f-series-bronco-double-din-kit

Thaks Billy, it turned good

cool good luck

Thanks man, I'm glad your here Red

OK so these people do make it, I just like doing these things myself www.obsinteriors.com/product-page/91-97-f-series-bronco-double-din-kit

Thanks, and good luck

Ha Ha Ha, yes I can do things a bit goofy, I did grab a good hacksaw later and then a dremel thats on its last legs, BUT, I did fix the dash pad, but I dont like that expanse of plastic that is the rest of the dash, so anyway, Thanks, I'm glad you get a kick out my goofiness, you know I always say, YOU should do it the right way, LOL

Was I being lazy, you know I do that LOL

The F7 but it uses the Linux OS and that limits you on what you can do with it from your phone, the S8 uses the Android OS and unlocks a bunch more futures, I'm eventually going to put the F7 in Mom's car and get an S8 for the truck

Thanks

thanks

04 Expedition seats, hears the video where I put them in kzfaq.info/get/bejne/fbh_kqqJ0N-qmac.html

Thats right, mite be kids watching

Hey sometimes you just need a nap, glad I could help.