Congrats on the KOH Finish, Look Forward to Watching You and Brittney at Next Years KOH. Also We need the Pro-R on the Flex Wall to see where it ranks Thanks for All the wonderful Videos your make

Congrats on your KOH finish. I especially want to congratulate Chris and Bec for their work on preparing the ultra4 car. Finishing the KOH is a big deal on its own and Chris and Bec were essential for that.

Great to see all that goes into getting ready for KOH, Glad you got it all done and finished KOH again. You all are amazing on what you have accomplished in the ultra4

Fantastic as always. Keep being yourselves and rock on.

Congrats on KOH finish. Love what you do. Take care and can't wait for the videos.

Congrats on the KOH finish this year, that was an awesome finish! Invest in a good set of transfer punches to locate the holes for your harness bar and then start your drilling with a pilot (much smaller) drill bit for your initial holes and then step up to the actual hole size. Work smarter, not harder! Lol Just my opinion.... and I'm old... so I have to! 😜 Keep busting out the awesome content, you guys rock!

Great videos. You guys appear to have enough toys for tons of content. Hope you are able to enjoy and have quality time both as a team and as a couple. Looking forward to KOH posts. BTW I did watch the live stream on the internet. Same comment for KOH organizers as I did for NASCAR, too much airtime on the leaders and not enough airtime to the other participants. Looking forward to watching #999 in KOH 2023.

Would love to see you driving to the events again. The one reason I really got into your channel was because you could see how durable it was on the trail and then you drove it home.

THINGS HAVE A WAY OF WORKING OUT. NICE JOB AND FINISH IN KOH!!

Great run at KOH! Happy Trails to you all!

Love that rzr pro r things bad ass... good to hear that your going to be going back to the old days and driving the stepchild to some of the events. Missed them days lol. Take care stay safe out there..

Cool setup for sxs! Some really cool interesting content. Appreciate the details and trials of installs. Lots of cool stuff!

Congratulations on you KOH finish. You all are living your best lives!

I keep a chain in my jeep to connect the axle to my frame so I don't have to have a super long jack. Can get the tire off the ground with very short amount of lift. Same thing will work for the Pro R.

Just joined your channel and I love all the reality you guys show. Real facts and information. Great job keep it up

Awesome video...showing all th prep work for the race....master Tech and young padawa @ work...great job..... egarly awaiting your next video....Safe travels

Nice job on this clip very informative and liked how it included the gang!

Spot on about the harness mounts. I have seen people mount to the floor and it's bad.

Congrats you are ‘WINNERS’ so so awesome, the awesome 4 some.

Picked up one of those headlamps after seeing yours, best lighting purchase I have made in years, so I bought a second.

Great freaking video guys!!!♥️♥️💯🤙

Love the color combo. That RZR is a badass Ride

Mean, Green, Crawling Machine! With a little red thrown in. So much work - a year’s prep dumped out not one video. A little excited there Kev? Don’t worry - you did great! I watched the live feed! We need a future video of how Beck got y’all into shape for KOH. LiteBriteNationRazor’sEdge!

Major amount of multi-tasking going on there!

Those 35's look great on the pro r. and Ilike thew color combo. Ya won't lose it in a parking lot.

I am excitedly waiting for Brit to do the KOH video !!!! (no pressure we can wait just showing love) I knew KOH would make y'all premium feed bait this year because of how many hits they got from litebrite last year. Congrats on finish. hopefully I can get to a trial take over at merus since I have been wanting to go anyway.

You should make some limit straps that grab A-arm and top of shock tower at ride height before jacking. Down travel would be limited so you could get the tire/s off ground to change.

Kevin, you guys need zoom h1n recorder + rode lav mic. Total cost $100. Have it record when you record videos. Dont use audio from it unless you lose audio on your camera setup. Then just splice sound from recorder and you can salvage video clips that way.

Glad y’all are back!!!

The rusty parts looks awesome

You had to go there with the Gladiator skids that they apparently refuse to button up and ship. Well great entertaining video. Thank you for your time.

Right at the start when you were trying to brake that bead I was thinking "now spray some WD-40 in there to lubricate it and try again" I did a stint as a tyre fitter and this was one of the tricks we used daily to get stubborn tyres off, then clean the wheel with brake cleaner before fitting a new tyre.

Jelly belly hammock in the door net 😂

Great video thank you!

Ill be hitting as many trail take overs this year!!!lets see if i can learn to offroad!!

When might we get some KOH video footage? I saw a podium interview post-race. Great Job! Higher finish than last year! Video I saw said 19th, I thought I read online you finished 13th?

Yes rockhard offroad has great stuff

Love your videos but I missed this year's KOH and would love to see that one but even the highlights would be nice for me. Thank you guys for some awesome videos

Sweet ride

It may be rust but the way the front bumper looks on the stepchild look super cool

And once again you guys did awesome at KOH. I definitely think you guys should do it again (if I had a vote, but that's just me).

You should check out the aftermarket ones they make for the Ford bronco to get rid of those nets, I put them in my bronco they’re awesome.

The hoop commentary was awesome.

Dude great driving this year.

Kevin the Rzr is looking awesome!! How wide are the 35”s Can’t find them on Nitto website. Big as they show is 33”. Thanks for any info when or where I could find them.

I know this was filmed pre KOH, but you mentioned extra buckles for KOH. That said I’ll take it as we will see you at KOH 2023. Keep on keeping on.

Kevin, buy yourself a Bead Buster XB-550 HD it will change your (or maybe Chris’) life for breaking a bead on the backside of beadlocks, and it’s portable could use it on the trail.

Hola te saludo desde Argentina impecable increíble brutal los videos super

Clear paint on that rusted bumper would look really nice!

You need to invest in a Drill DR. Get the big model so you can sharpen 1/2" bits!

Kevin you're really good talking on video, quite natural. You'll be a talk show host soon.

Love your videos

Awesome 👍

I remember getting ready for big races... it was a long time ago... before social media... Can't imagine trying to working time into the schedule to make sure you're getting the shots you want, post made that need to be made and then cut and produce a video on top of getting vehicles prepped to the point you actually finish KoH,,, it's no wonder you are looking like a chicken with it's head chopped off! i can just imagine the "KEVIN" when Britt started editing and figure out their was no sound... 😂 Great video!

Cool video. I am guessing you will be stepping a class down from the 4400 class to the *4800 Legends class. i mean if the UTV is becoming a chase vehicle i could be wrong but looks like your bomber chassis would be very competitive in that class as well. again thinking out loud. since KOH is done this year just gonna have to wait till the next one.

Hi, love your shows, you did great at king of the hammer! I have a Pro R order . I like your front bumper with small light bar!! Can you tell what bumper and light kit you used please! thanks

Need to get accessories for the RZR from SXS Blog!

YES!,YES!,YES!

Awesome 😎

Dave at FactoryUTV is the best. RIP Bob.

You need to watch Terra Crew's walk around on Darren Parsons Gladiator. He has built a cage for it that works fantastic.

THAT HOW I DID WITH A CAR TIRE USE A BUMPER JACK OR LAY A BOARD NEXT TO THE BEED ON THE RIM AND DRIVE MY CAR ACROSS IT THEN SPIN THE RIM AROUND GET ANOTHER BITE ON THE BEED MAYBE WITH YOUR JACK USE 2 OF THEM ON EACH SIDE OF THE RIM OR NEXT TO EACH OTHER

Cool video guys, can you tell me what kind of headlamp you are using? What brand is it?

The forks on the forklift will debead those tires. lol.

Y'all have any thoughts about Pidgin Forge, Jeep Jamboree in August? Will be our first time getting to go. I will be watching KOH, STAY BLESSED AND GOD SPEED BE WITH YOU.

y'all need to come see the new Rugged building , let me know and I will take y'all fur some amazing clam chowder bread bowls .

I'd like to see a multi car team from yall. Maybe a mixup like Kevin and Chris in 1 and Brit and Beck in the other. All 4 of you have the skills needed to compete very well.

really looking forward to your KOH video!!

Problem being, with four point harnesses your body can't tilt sideways. So if there is a rollover, your spine becomes the roof support. You've got that solved by adding in a roll bar, as long as it is at full roof height, but then a roll bar also means helmets ALL the time so your head can't slam back into the roll bar. So once you go to four point harnesses...you are into needing way more before they match a plain three point harness for regular driving safety.

Should put an eco boost in that RZR lol but thing is absolute beast of a unit

Could you temporarily make the new skids attache to the factory plastic skids for added belly protection. Idk just an idea i would've tried.

Omg can I have a set tyres looks like you got a few. Lol.

When you run the LED lights, do they interfier with the 2-Way Radio? I've found on my 2011 Dodge Ram 2500 my new LED running lights on the roof caused a lot of radio interference when they are turned on. I had remove them and go back to the stock incadesent bulbs.

if only Factory UTV could make some of these for Suzuki Sidekick/Geo Tracker i think there would be a market for it. Lightweight i assume. Man i would love this on my rig, I don't have underbelly protection right now cause i don't want to add steel weight.

Hey do you guys got plans to hit Michigan if you do let me know when and where

Lite Brite, Just to let you know, During The King of the Hammers race they didn't show you once. That really sucked. I hope you did well. God Bless

Kevin - sometimes you have to spit on it!!! LOL

Kevin needs some step drill bits.

The cage should have been the very first thing you should have done! Nice cavalier attitude about a cage Kevin.

Speaking of American adventure lab when is the articulating tent mount happening

Definitely can see the stress in this video. And the tires.. how long ago did yall put in that order!! Holy cow!! The tire wait right now is at minimum 2-3 months out.. still waiting in a 37 replacement from December and ill be lucky to see it next month. I really wish I had the guts, determination, and skill that y'all have and be able to do what y'all are doing. From what I can see from the videos the life y'all are living is my dream. I keep going to the E3Offroad site and really Want to get the annual membership but feel that life will keep me from being able to actually utilize all that it offers. My goal would be to come and do a trail take over with yall, but work and vacation time isn't there for me to attend one and of course working swing shift I don't get many weekends off which I'd assume is when yall would plan those take overs (idk because I can't see the schedule 😭). Y'all are amazing and keep it up, keep pushing to reach your goals! We all love you in the litebrite nation and hope the best for you all. Chris and Beck, yall are awesome and so glad you're keeping the rigs in working order so Kevin can keep breaking them 😆

Ah yes, Stress .. the surefire sign that you are getting near the dreaded "Deadline", and also the perfect cure for any "Perfectionism" you might still have. 🤣

Whatever you (Britney?) did to the sound on this - it is very clear today!

Did RPM ever follow up with a failure analysis for that TRE?

Hahahaha. Love it! Wanna redbull or 10? Lol

Well me personally I think that bar should come closer to the seat so that way it's not literally practically in your face when you're sitting back there which is not good if you do get in an accident so that way it's not several inches from the seat it's only like an inch or two like that would be safer and it still does the same effect I'm assuming on your seatbelt because the people in the backseat but you know a few more inches to react hopefully we still have their hand on the bar we're going to make sure the phone was on that bar is at least an inch deck ok ok

Can I have some of those tires that seem to be taking much needed shop space 😁😁?

What is the name of the head light that goes on your head called? And where to get one? Thank you

Kevin "I haven't used my head band light in a while"..........."Thank you Chris and Bec"

Calm down Kevin love content

Wow. I need 4 nitto 40's😂

Lots of toys

Kevin and Brit what method/ who do you use to balance your tires on step child?

MY SELF HERD BAD THINGS ABOUT THE 6 PACK BATTERY MAYBE GET RID OF IT AND PUT A HIGHER CRANKING AMP WITH SO MANT RESERVE LEFT OVER

Did you try a ratchet strap around the tire? It doesn’t seem like it would work, but you would be surprised!

Today's video makes both my Jeeps feel small with only having 33's on them right now... A side by side has bigger tires...

Just an idea for getting the tiers to seat on the rim. I don't know if it will work on these tiers, they might be too ridged. put a good ratchet strap around the center of the tier and tighten it up and that should push out the bead. Works on regular street tiers. And btw, I bet that the original skid plates are made for sand, not rocks. Which does mean that they are not up to rocks, and definitely not up to you all! ;-}}

Why not cut the end off the antenna and put a new one on (after you shorten the cable to the proper length)

is the sway bar to the frame loose??? 6:15 frame

with that bar in the back, it looks like when you hit a bump the people in the back might hit their head on it. You sometimes have kids back there. Kind of looks scary.