Thanks for watching - If this video was helpful please give it a thumbs up and subscribe to learn about my next videos!

Clear video and perfect sound. No background annoying music. Perfect!

Thanks, Silver. Old nuclear navy Machinists Mate and mechanical engineer, here. Love your content. Won't touch control systems. A man's got to know his limitations. But, I really like the way your HVAC guy installed the ersatz zone control. I've had two houses with oil-hot water systems, with domestic coils. I love the way they heat the house. My current system is about 50 years old. I had to replace the Beckett burner and expansion tank two years ago and installed missing baffles. The system is generally bullet proof. I took the system to parade rest and replaced anything with marginal performance a few weeks ago. The old system is burning at 87.8% efficiency now. The baffles seemed to have the most impact on efficiency, but I can't prove it. Turbulent flow vs. laminar flow in the heat exchanger makes sense. My house sat unoccupied for nearly ten years before I bought it. It took a year to get all the air out of the system. I put auto-vents on each baseboard radiator, but the expansion tank and air separator are in the basement like yours. And, the expansion tank was filled. High point vents are the way to go. If I build another house, I will have a loop and expansion volume in an upstairs closet. But once vented, the system is nearly silent. A little thermal ticking and that's about it. I cycle the auto-fill valve each spring. Before I installed a water softener (another good Silver Cymbal video), scale would wreck the valve. I replaced the boiler relief valve two years ago, too, Justin Case. I check the exhaust damper periodically, too. I noticed exhaust odor once and discovered the counter-weight had fallen off. The back pressure in the flue caused a puff of exhaust each time the furnace ignited. I found the weight and screw and balanced the flue again. Used a little Locktite, too. I use a brush and ShopVac to clean the radiators on a rotating basis. (PMS Schedule) I have CO detectors in the basement and in the room directly above the boiler.

The world need more people like you!!you're a very special guy God bless my friend!!and thanks a million!!

I used this video as a learning resource when I first started in HVAC (In NH like yourself). Now I'm well versed in oil service, in part thanks to you!

I’ve been an HVAC service tech for a little over a month, no formal training. My company is one of the only ones in the area that still services oil. I’ve seen enough gas furnaces and heat pumps to where I’m getting comfortable with them, but a nice, concise overview on oil is well appreciated!

I’m considering replacing my 35+ year old boiler myself and this video is a great tutorial on the basics of each part. Thank you!

Thank you! Coming from a Gas force hot and Central air to an oil burner, this video is gold!!!

Really well done... we have oil-fired forced air furnace but my in-laws have an oil-fired boiler that needs to be replaced and I am helping them select a vendor. This provided great background on the fundamentals. Thank you!

Just bought a home with oil and couldn’t figure out anything. Watched this and followed along and now I have a good understanding of how it works and where the different functions are. Thank you saved me hundreds by not having to call someone out!

Thank you for this video. Who ever moves to the north or a new house that has this type of system; should watch it. Very helpful. My boiler system is not so elaborate, but not only I understand it better, but I also learned about other components out there. I will check out your other videos. I don't why some people would dislike this video. It is genuine, simple and honest.

Newer to New England and a first time homebuyer closing in January LOL so thank you this beautifully detailed walk through!!

👍 I have 50+ yrs as home owner with basic furnace knowledge. I found this very helpful for new owner & appreciate you instructing not to fool with devices, but contact professional. 😷 My interest is understanding home owner servicing occasionally leaky OTP Valve. I turn off main water supply & trigger valve couple times, collecting very dirty water. If that doesn't stop leak, time to call PROFESSIONAL ! 😷

The auto fill valve also regulates the boiler pressure from the house plumbing from 60- 90 PSI to around 20 PSI. If it fails, and the pressure exceeds 30 PSI, the external pressure relief valve (located directly on the boiler) will dump some water on the floor to reduce pressure. Also, if your expansion tank is water logged, the expanding hot water will do the same thing. If there is a leak in your hydronic boiler system, the auto fill valve will let makeup water into the boiler at 20 PSI, unless you override it by flipping that lever on top of it . Also there is another type of oil fired boiler. It's called a steam boiler for older houses like mine. Steam systems are simpler in operation. But are less efficient than your hydronic heating system.

Thanks a lot for putting this video together. It was very well explained and it really gave me a better perspective of what is happening beyond the multiple pipes, valves, etc...which was like a black box for me before your video. Thanks!

Very helpful, i am buying my first home, potentially an oil burner and this was very informative

having a cheap land lord and being cold i learned a lot abought the cad cell and how they work also HOME DEPOT has a lot of oil burner parts that even the store employees didnt now they had till i went down after seeing thier online inventory and items. i needded a new cad cell online was like $15 cheaper than the store price so i went down there to have it priced match took us a few minites to blow the dust of the section of shelves where the parts where and we where all shocked at how much they had on shelves lol

Very good, thank you. When we had oil-fired central heating in the '60s/'70s (in England), our tank was in the garden - a big metal container, painted green. It was under a fir tree, so we had to take care that the fir parts didn't get in through the fill-cap area. Good to know about the safety devices. I once went inside a large house where there'd been a fire. The oil-fired boiler had been completely untouched.

Cool that you have outside air reset. That is a real energy saver. Why make 180 degree water all the time when you might be able to use 90 degree water on a milder day. Guess that you would have to not use that if you have a tankless heater. Looks like you have. Real sanitary installation. I’ve been working on oil fired equipment for almost 50 years, and your video is excellent.

Thank you for the wealth of knowledge, in the process of buying my first home this month. This video was a huge help I have 2 pages of notes lol

Thanks for the video and the time you took to make it. Just purchased a house with fuel oil. Much appreciated video.

I came here to satisfy my curiosity. These sorts of systems are, from what I know, VERY uncommon everywhere except the Northeast States. Gas is more common in Michigan, and in states like Alabama and Tennessee, heat pumps and resistance heat are more common, so I don't have really any exposure to these sorts of systems. So, yeah, learned something. Mission accomplished.

This is the best source of info for the oil burner system I have found. Very concisely and detailed information. Thank you!

The greatest, most informative boiler video out..

Thank you, its my first time owning a home with an oil furnace.

Hey Silver Cymbal, I am fully familiar with oil burners and oil furnaces and boilers, but I still like to watch these kinds of teaching videos just to see how the material is being taught. I especially love that you talk about the oil tank gauge because that's a feature on every home heating oil tank but a feature which wouldn't be obvious to the plain and ordinary homeowner because all the gauge is is this little tube sticking up out of the top of the tank; it's controlled by a float inside the tank. It's impressive that you would mention even the smallest details about an oil heat system.

This is absolutely perfect for a layman like me. If all videos were like this I think I may just understand a good amount! you would be a great teacher! big up from the UK! : )

Great video as a homeowner I feel like going to Harbor Freight grabbing some tools and a tool pouch and starting an oil repair business!!!👍

Thank you very much. This was super helpful. I recently purchased my first home in New England moved from the Caribbean. So I really had no idea what I was looking at. Thank you again.

You are the best!! Im in Hartford County and I'm new to oil heat, I too have a Beckett but not as many fancy plugs etc that you have... thanks so much for all your videos!! Im learning more & more with each video I watch!!

You should do a video like this for central air conditioning.

Great job on the video. While I could expand on many of the points you covered simply because of the complexity of a complete hydronic system, I won't because you did a great job covering most of the components. The one critical thing that I will add though has to do with the oil line going from the tank to the burner. Even if your state laws do not require a flexible plastic tube over the oil line, (most of which are soft copper tubing), if the line is buried under the concrete unprotected, and comes into contact with the concrete anywhere on its journey to the burner, a chemical reaction will occur, and the copper line will eventually leak. Because nearly every state has to follow very strict federal or state environmental laws, an oil leak UNDER that concrete could end up contaminating the soil and the homeowner is the one responsible, and it WILL COST you many, many thousands of dollars for environmental clean-up, and in some cases that cost could be as much as the cost of the home! If your oil line does not have a plastic shield, whether under the floor or not, install one as soon as you can because the cost for not doing so will be far greater than the cost of a new copper line. Thank you for your video's.

AWESOME Video! Very informative and narrated. I don’t know much about boilers but that’s a beautiful set-up!!

The barometric damper is installed to maintain proper draft in the combustion chamber.

Great Video, you have one of the best looking system i've ever seen! really clean and easy to work on..

Never seen a boiler reset control in a residential setting. Smart to install though. No need to heat water to 180 on a 60 degree day. Nice clean install very clean and clearly laid out.

Love how clean you have the area. Maintenance must be easy to perform and comfortable

loved this video, i just learned what i need to put on my oil boiler. thanks

Thank you so much for this video. I am, exactly, who you made this video for - a new homeowner with very little understanding about how my oil heating system works. New sub.

ty, I am 75 and just moved into a home with an oil boiler; never had one before. I paid a professional to look at it and get it ready for winter, but I still am unsure about my boiler. There are all kind of noises coming from the (can't think of name right now, I don't have radiaters.. I have.. whatever) I hear noises from them and from my boiler... all kind that I don't know what they are. I was woken several times during the night.. didn't know if someone was breaking in the house or walking on the roof.. but I am sure that they are all coming from my heating. not use to this. made me search for this type of video this morning.. and all I can sasy is boy, you know your stuff. I feel relieved to find it.. learned a lot, but need to make it stick. it will take me a while. First thing that I am going to do is go down and see what kind of boiler I have! thank you for the boiler video.. I will be watching it many times

as a retired oil burner tech good video remember folks a oil burner flame is a controlled explosion ; D

I'm still getting to know my System 2000 combi boiler. Thanks for the video.

Excellent. Thank you. Very simple. I’m trying to find out how to adjust my domestic water temperature. It’s very hot.

Great Video! I had to change out one of those zone valves once that had died...somehow I managed to do it myself thanks to a video or two on youtube.

This was very helpful. I just bought a house that has a oil heat boiler, and I have no experience with boilers. I think the one I have is past its expiration date.

Great video for us new oil heat people. Thank you.

That is a crazy set you people use in the north. Here in Houston, Tx. we just have 1 40 gal. average gas or electric water heater, hot and cold water supply lines and another pipe for the TPR valve and the vent to the attic. My 40 gal gas water heater costs $300 and I install it myself and I only know minor plumbing.

Such a complicated, complex system. As an 80 year resident of California, for the most part, I’ve had various forms of forced or natural airflow heat, powered by natural gas. The only exception was in the early 70s in Oakland Calif. Steam radiators, not hot water, natural gas fueled. Yes, you’d hear the the pipes knocking and the steam hissing, but after a few minutes, it was silent and heated the apartment. Today we have forced air heat via propane in a 250 gallon tank outside. If I had to,put with that oil heat system, I’d replace it, or MOVE.

This is good info. I watch Tankmasters KZfaq channel and they're a bunch of guys in NY state who install/remove oil systems and do environmental remediation for leaking systems and I never understood the whole process of the furnaces. I live in the deep south and we use gas furnaces or heat pumps exclusively down here.

Please make more videos. You explain things very well and straight forward.

I really liked this video thank you very much, may God bless you and gives you the health and strength for you make many more great ones in the future.

Brilliant video! I walked me through everything I needed to know to get me started. Now I know why my boiler is "leaking".thanks for sharing; will be checking out the other ones

Your video has been a great help in aiding me with identification of the various components of my system and what they do. Exactly what I was looking for. Thank you.

This was a great video, thank you! Took a look at that boiler after this and everything finally made sense lol

Helpful. As i helped someone's no heat now solved. Do have another unit no hot water during the warmwr months to faucets unless they turn heat on high. My assumption is diverter valve issue. The technicians they had come just clean and leave never solved the issue.

I m an idiot but this video was really helpful to understand what I m looking at when I go downstairs into the boiler room. Great video.

I just moved to the far Northeast and this video was so helpful

I definitely appreciate it!! Hvac guys were installing new air handler and forgot to turn water valve on to first floor. Ugh it's 10°

Nice very clear and concise to the point and understandable the installer did a really nice job on that install no doubt . its been a very long time since ive worked on a boiler since the 80s when i was going thru my apprenticeship in new bedford mass local 77 plumbers and pipefitters after that was done and i had a good background and had been trained for the previous 5. Years by the best of the best in the country in the plumbing and heating field i decided i did not like cold weather lol and high tailed it to fla. This was in 89 and yes ive been back for visits and unfortunately funerals and such i could never live there again anyway lemme get back to my point lol the boilers havent changed at all basically the components are all the same maybe a bit smarter but thats all and in fla theres no need for hydronic heating systems so i spent my career working in high rises and hotels and such running jobs and doing my own plumbing work on the side raised four boys due to the education i got from the men of local 77 thank you gentlemen it has served me very very well and im forever endebted to you guys now i gotta go pahk the cah and have a beeh later everyone and goidnight

One small error... as your speaking about the circulator pump for the baseboard heating, the return line is that large pipe at the left rear corner of your boiler. The water cannot return to the boiler on the pipes above that circulator pump. It's a one-way flow as with any other plumbing. You'll notice that a line from your indirect water heater tank is also connected to and returning via that pipe around the back. I am a little curious what room or location that line on the far right (above the circulator pump) goes to as it is the only one not insulated and it's location doesn't seem conducive to a good flow unless the control gates (zone valves) to all other locations are closed. It was probably a zone that was added on your system at some point after the original system installation. Very nice system install that you have there. Well done, resilient and clean. Excellent presentation as well.

Nice video and well explained, thanks. I'm not a plumbing heating guy just a industrial mechanic- millwright. I bought an old house several years ago with an old Burnham boiler 4zone 4circ pump plus hot water packed in a small room and just about everyone of the many old gate valves had a drip.It was quite a project to replace and repair all those leaks with so many closely placed soldered fittings because it would start to melt out the solder on nearby fittings. I plan on replacing that old boiler in the near future like next summer, my reason for watching boiler videos and love how neat and clean your system is laid out... but what if you get a bad ball vlv or leaky tee in the middle of that manifold- major project or do I just suck at soldering and should be watching different vids? Just getting plumbing lay out ideas with ease of maintenance in the future...nothing lasts forever.

Riello is very common on our boilers now. Italian engineering is good.

Two Thumbs Up !!!!! Great Lecture, Informative, easy to understand, etc ! But I have one Comment..........You have one clean, organized, taken care of system ! Love it ! Now...explain....which pipes you wrapped, and why not the others, and which Joints only you wrapped and why ? Otherwise Great Video, every inch of it ! Now Heater coil plate replacing, that rusts over time...., and tune ups, filter and strainer replacing.......Thank You !

Thanks for your reply. Have you ever checked out a rielo burner, heads and tails over a afg Beckett. It runs in a positive. pressure situation, no soot, no odors. We used reileos on very tight peerless boilers, that had to be vacuumed every two weeks. At this stage any reputable service has the stock to repair them, though not as easy as a Beckett. Carlin ez 1s are also very good and clean running, set up correctly. Take care.

I'm glad we yave a natural gas furnace after watching this. So many things to leak or break with that system.

Thanks so much. Have never had oil heat before so all of this info was very helpful and reassuring to us. Very well explained.

I bought a Spirit low boy Oil Furnace last year..Love it and it has these newer Beckett AFG Burners..Bullet proof love them and very reliable and easy to maintain..

I've got a slant fin boiler its very efficient, yearly maintenance done on it.A lot of money well worth it.

Thank you, very informative video. Mine is a New yorker. I haven't had any real issues with it yet. I believe I will convert to a natural gas boiler once this dies.

Thanks for concise overviw of this heat system. figured i would ask while i am here: What would cause return pipes getting cold not frozen? Preventing baseboard heat from reaching a zone, i suspect slush not solid ice

This was cool. We don't have boiler systems here but it's fun to learn about them.

Thank you! Really helped me understand what’s going on with the heating in my new home

Excellent, methodical, detailed video. Very much appreciated!!

Excellent. Thank you. Clear. No nonsense. On point. Well done 👍

Thank you so much. You saved my hind with this video.

I'm a retired now but spent years installing and maintaining boilers. You have some useful householder information in this video but frankly you have some crap too. Just to pick up one example the flue stabiliser is intended to maintain a reasonably constant "draw" or draught on the boiler combustion conditions. The combustion should be set up during commissioning by a combination of nozzle size, oil pump delivery pressure and air supply from the fan in the burner. Variations in flue draw would affect the airflow which would cause variation in the combustion mix leading to less than optimum burn efficiency. This is not so critical with a modern pressure jet burner but in the early (now thankfully in the past) oil burners such as vapourising pot and Wallflame type it could really upset the burn and cause sooting and stink. Regular maintenance (annual) is required to keep the boiler efficiency up. This should include cleaning inside the combustion chamber and heat exchanger, cleaning the burner fan blades and airways, check and replace nozzle, clean ignition electrodes and flame detector, check seals on access panels, check and replace oil filters, check firestop valves (the fusible head type you show often stick and are not as reliable as the sensor bulb type) and run the burner to measure combustion efficiency with recording of flue CO2, temperature and draught. I'm also surprised your building standards allow you to have oil tanks inside the house. If a house fire did occur a few hundred gallons of oil (kerosine) in the place would really help it along. In the UK the normal location is outside with regard to clearance from combustible materials and with containment to stop leakage contamination of the surroundings by a bund or a double skinned tank.

Great video, I have a house that was built in the 19 30 it's a Old Furnace it has most of the upgrades that you said but my problem is is radiator Heat and the technicians always refer to a gravity field system I have to bleed the radiators my other question is this where does the water come from to feed the furnace I get nothing to the upper floors radiators in fact I have left the radiator valve open for several hours and nothing comes out get back to me thank you and keep the videos going

Makes me glad I have a natural gas furnace and water heater! So much simpler!

Very informative and clear video/ audio I like it . Thanks bro

Thank you so much. It helps me as a student of HVAC/R

Good detailed video m8. Still widely used in modern hikes & buildings in UK it’s actually in most cases twice or more economical then heat pump which they are trying to push to confer here in UK. Smooth & quiet night operation.

This is a great video., so what if you push the red bottom and turn the switch, but the flames do not go on and the boiler makes a noise but there is no flame going on ; what then 😊

I absorbed all your info thanks, just changed an air valve

Thanks for the in-depth information

only problem with that is when that circulator goes, you will have no heat in any zone, thats why its better to have a circulator for every zone

The heating and hot water system in my apartment complex is composed of a series of pipes that go down deep into the earth near the core to heat up and it gets pumped through each apartment. No oil or gas burning. Heating by geothermal energy...so cool.

Thankiuu ! Btw the oil valve didn't melt inside in case of fire , it's only the handle who melt. That handle is pushing a spring when open , in case of fire when the handle melt , the spring is release , and automaticaly shut down the oil !

Very clear. Good explained. Well spoken! thx for sharing!

Beautiful setup

@Sliver Cymbal Massachusetts!!! Shout out from NH. Thanks for the great content

Great video, I learned a lot. My oil system works fine during the day but at night stop working, what can it be ?

Love the way this guy says Taco.

Thanks! I’ve never lived in a cold climate in a home large enough to need a boiler. But I recently installed a Taco hot water recirculating pump and got curious after seeing so many KZfaq videos about Tacos on boilers. They definitely have more valves and other hardware than I thought! Definitely not very DIY friendly.

Hi, i thought this video was super excellent 👍 I have a similar set up and in NJ. The issue I'm having is my tracometer ? Never goes under 140 so when I turn my heat on it only runs for a little while once a reaches 190 it turned off. It take so long for the heat to come back on that I set my thermostat at 68 but it never gets there. It stops at 63 and 64 and it's been cold these months so I'm trying to figure out why that's happening. I had maintenance done on it back in October and I have about a quarter tank of fuel. All the other parts that you mentioned seem to be working fine. Any advice? Thanks again I appreciate your expertise!

Sludge at the bottom of the tank is not affected by having a low oil level. The oil is always taken from somewhere close to the bottom.

Wow excellent video! Very informative and hits all the pertinent data about introductory oil furnaces! Great job!

Absolutely Fantastic video ... Thank you for posting this . 👍👍👍👍👍

I think there is a minimum clearance between the Damper and the top of the furnace. Or at least on Burnham 👍

Should I be concerned buying a new home with a boiler unit? Are there any issues with home warranties? Do they get expensive to maintain or replace? Thank you for this video, it was very helpful!!!

Another great and informative video!