Oil pressure senor quick fix p0523 (2012 escalade)

Рет қаралды 153,176

7 жыл бұрын

Here's a really quick way to take care of your oil pressure sending unit which is on the pack of the intake and does not require removal of the intake this process can be done in less than 20 minutes

Пікірлер: 51

@edmilligan3837 5 жыл бұрын

Thanks, showed this to my mechanic, he said WOW no need to take everything apart! And it worked, Saved me some money!!!!

@edmilligan3837 5 жыл бұрын

Oh yeah and it only took about 45 minutes, thanks again!!!

@fabianpaco2916 4 жыл бұрын

Thank you for putting the code on there and showing all the tools this video really helped me out you save me about 500 bucks for a mechanic to do it

@andrewleicht5317 6 жыл бұрын

Getting this style connector off of the switch can be a little tedious. Just lift out the little gray plug with a small flat head screw driver and then squeeze the black tab that was next to it and it comes off. Be careful not to drop it in the back of the engine. For my repair, I removed the vacuum line and the fuel line only . I lifted the fuel line and tucked it above the back engine cover. This provided much more room for my hand and the socket tools. Overall this video was a great timesaver. Thanks!

@dariog4154 3 ай бұрын

I have to congratulate 1st video i seen that's very detailed i have 07 escalade

@victorseger6044 2 жыл бұрын

I just did this yesterday on a 2010 Yukon XL Denali 6.2L (pain in the ass). Zero room had to disconnect the quick connect on the fuel line and the vacuum I took a video with my phone so I could disconnect the wire another pain in the ass finally got it disconnected now for the fun part getting the socket on the sensor.. 2 hours later I got it out now the socket nightmare begins.. my suggestion is to hand tighten the sensor as much as you can then snug it up.. putting the wire back on is touchy feely but for some reason I got it on first shot..the whole thing took me about 4 hour's only because of the size of the motor and make no mistake if I took it to the shop they would have pulled the intake out to the tune of 620.00 so as a senior citizen I put my game face on and crawled into the engine compartment.. and I'm sore as hell today..but worth it

@mcroley591 3 жыл бұрын

Thanks for posting this! I’ve got a 07 Sierra to do this in. Thanks again.

@alfredmartinez128 3 жыл бұрын

I just fix my Escalade 1 hour total Thanks bro!!!

@mikel9666 4 жыл бұрын

Thanks brotha just got mine done, mech said intake mainifold had to come off and was gonna be 2 hour job, i was done in 30 mins

@liveforphun 3 жыл бұрын

Can you please tell me how to unplug the Molex? I can only see it with my phone and I cannot see it while I am touching it, and it is driving me CraZY I've been trying for about an hour to unplug that wire

@nuttierthansnickers2178 4 жыл бұрын

Great vid, I have a 07 Suburban and Mazda FB... I noticed that red FC in the back!

@aarondimitroff4702 4 жыл бұрын

Saved me a lot of headache, it went smooth. I just used a deep socket instead of getting the specific socket and it went smooth. Thanks for the insight

@gabrielrivera1915 3 жыл бұрын

what size deep socket? was just looking online for special socket

@christianbonfiglio5544 3 жыл бұрын

Gabriel Rivera @ Aaron Dimitroff yes please I would like to know also

@liveforphun 3 жыл бұрын

The necessary socket is a deep-socket, six-point, 27mm available individually at Harbor Freight for about $8

@liveforphun 3 жыл бұрын

@mptorecon 3 жыл бұрын

@@liveforphun if see it with your phone maybe try a long enough pick tool or make a pimp stick out of a coat hanger to cat the plug lock , it should come right off once you lift on the lock.

@rigidconcepts3517 7 жыл бұрын

This worked absolutely perfect! I have a 2013 Escalade ESV. The only thing I changed was I used two 3" extensions and a union. I put the extensions inside of the fuel line so that it isn't pinched when you use the socket wrench. Thanks for making this video it saved me a lot of time!!!

@wadetownsend2402 6 жыл бұрын

Johnny Dickson what kind of motor in that Escalade ?? I have a 2011 camaro 2 SS RS.. my oil pressure low after start up... Sometimes I have to turn it off and restart it to get it to come up early in the morning when it's cold??

@mptorecon 5 жыл бұрын

Yep relatively easy, did it today. Thanks.

@liveforphun 3 жыл бұрын

Can you please tell me how to unplug the Molex? I can only see it with my phone and I cannot see it while I am touching it, and it is driving me crazy I've been trying for about an hour to unplug that wire

@liveforphun 3 жыл бұрын

Thank you for this I was your 420th like! 👌 😗💨

@mrdeanv4414 3 жыл бұрын

Thank you very much....! I have 07 Ext Escalade with the same problem...

@clearedhot6146 3 жыл бұрын

I have a 07 escalade, dealership told me the oil pressure sending sensor was reading high voltage and needed replacing....it's gonna cost around 500 something. My problem is, no lights on the dash are coming on and it seems /sounds like its running normal. I told the service advisor that I've never seen any warning lights on the dash and they said many times, dash lights don't come on.

@mps9608 Жыл бұрын

Thanks, great video.

@pirulinlmb 2 жыл бұрын

I like that 7 in the back

@sdaxe2408 6 жыл бұрын

Need some help please! Not a car guy but fairly good at following directions. As iremoved the evap? line (first item after beauty cover that you show removed in video) and moved it to side the it snapped off. About 18" from connection there is a connection to another section of line. The other line snapped off inside the connection. What is it and can I operate vehicle until replaced? Thanks for any help!

@MrWillb14 5 жыл бұрын

Do you know anything about the lifters not priming properly?

@truenewsglobal 3 жыл бұрын

Can you drive it until it gets fixed? Mine is at 117 psi but can’t get it fixed till Monday

@sew04ss 6 жыл бұрын

Those are 3 inch extensions not 6 inch. Those two 3inch ext equals 6inchs

@mrbrowz1000101 Жыл бұрын

😐

@illustr8phee100 3 жыл бұрын

Change the screen in there right ??

@liveforphun 3 жыл бұрын

HOW do I unplug the molex⁉

@rivercitymetrology9140 5 жыл бұрын

Lol, are you telling your girl you have 12 inches...🤣. Those are 3 inch extensions not 6 inches. Seriously though. Good video...

@Donnythelatemodeltech 5 жыл бұрын

👍

@honda70kd 2 жыл бұрын

Nice to say how in the hell you get the harness off the sensor

@joshmaier18 4 жыл бұрын

My 2007 low oil pressure light comes on when I’m at a stop light and goes off when I give it some gas. Is this a fault on the sending unit or the oil pump

@mattwillis1698 3 жыл бұрын

Check if it's low on oil, if it isn't I'd would suspect pump

@bobillionjensen6317 6 жыл бұрын

I have a 2009 silverado. I can't get the harness off. Or not sure how too. Its got blue with what looks like a gray square.

@braddock77 3 жыл бұрын

Pull gray square up and then after push it in towards the sensor then pull up the whole connector. I hope you didn't wait 2 years to find out lol

@skrljac 3 жыл бұрын

where do you live? I need one replaced?

@LegoMaaster 6 жыл бұрын

How do you get senor off

@leemitchell4533 5 жыл бұрын

How did you get the sensor plug off? Trying now for 30 minutes

@JC-jh6cz 5 жыл бұрын

I hope u were able to there's a clip on one side were u lift up enough just to clear what looks like a safety latch or pin an then just pull the plug

@shannonnery246 5 жыл бұрын

That plug is a pain in the dick to get out SMH

@MJ-mf9qh 2 жыл бұрын

funny how no videos show how to release the connector lol ...

@donnieai 3 жыл бұрын

Easier from the bottom? Have to use that socket or is there a cheaper route? $20 part $60 tool typical gm. HHaha

@victorseger6044 2 жыл бұрын

Bring it to a shop and you'll find out just how cheap that $20 part and $60 tool is.. as they start removing the intake changing the part in 10 minutes then spending the time putting it back on..new gaskets and replace the parts they broke doing it.. shop charge's anywhere from 400 to 650 to do it..

@justodamian4065 2 күн бұрын

Thank you so much, I could not have done it without your video & another. It was not an easy job & very difficult to get to especially when taking the electrical connection off the sensor. I used this video for that kzfaq.info/get/bejne/b96JYKaIsNavf4U.html I found that Harbor Freights 1/2" 27mm deep wall socket for $4.99 was nice & snug, it worked perfectly. THANKS AGAIN.