QRM Eliminator / RF Noise Canceller

Рет қаралды 42,487

3 жыл бұрын

QRM Eliminator(Noise Canceller) is a small device useful to remove an unwanted noise (QRM) on shortwave bands, produced by some electronic devices like Plasma TV, LED lights or pulse power supplies.
Noise eliminating system is based on phasing/nulling the same signal received by the two antennas (main and auxillary).
QRM Eliminator: bit.ly/3cafDRr
Coupon: BG1bd510 ($45.99 after coupon)
Other RF amplifiers: bit.ly/34FuQ94
Download Banggood APP to get an extra 10% off: banggood.app.link/58MOMgLBKgb
#QRMeliminator #HowToUse #NoiseCanceller #Banggood

Пікірлер: 84

@DL1GKC 2 жыл бұрын

I also own the same QRM eliminator. This is the best demonstration of its use and effect on KZfaq! Thank you.

@vne2328 3 жыл бұрын

It would have been nice to hear the system with the noisy lamp on and off.

@joelee24 2 жыл бұрын

I got one similar unit from MFJ, it worked great to eliminate noise from nearby commercial lightings while I work 6m, and it got auto Tx sensing to bypass the unit without additional wiring, but on this particular channel I need to add a 1.25x accelerator as well...

@Steve-GM0HUU 2 жыл бұрын

Should this be a standard feature in modern HF transcievers given the issues many hams now have with RFI which only seem to be getting worse as more and more noise generating gadgets are installed all over the place.

@OM0ET 2 жыл бұрын

Yes, that was my thought too. Why is not the phase cancellation the feature of any modern transceivers... that would be great!

@sas7388 2 жыл бұрын

@@OM0ET and it should be automatic!

@fernandogonzaga1011 Жыл бұрын

Congratulations for the video! Can you advise PTT cable details ? Thanks

@RGC198 Жыл бұрын

Excellent video. Thanks for sharing. I could use something like this on my set up here, especially on the AM band.

@danedewaard8215 2 жыл бұрын

Works well! Thanks for the video!

@tuberadiohistory8093 Жыл бұрын

Thanks for this presentation. I have ordered one and hope it will help me to drop down and eliminate the noises here for better SW reception.

@jamescady723 2 жыл бұрын

Nice review. Thanks.

@SuburbanDXing 3 жыл бұрын

Interesting presentation, Paul. Clearly this device eliminated the QRN source, and probably could assist in reducing a local pesky QRN issue. So for the money, it could be worth a try. The problem is when there are multiple sources, like there are in urban areas. In those situations, we are pretty much stuck. Thank you for posting this and 73! de WX0V

@OM0ET 3 жыл бұрын

Thanks Scott for watching! Yes, I guess you should then choose the strongest QRN source for your auxillary antenna and if it could pickup the others too that should be even better. :) I don't have QRN in my area so I can't make test in real condx :) Best 73

@Hearthglow 3 жыл бұрын

I just borrowed one of these to test. My main antenna is a 40 m long EF, about 10 m up. I first tried my 144/440 antenna as aux, because I had read that it was a reasonable choice. It was not good, because the box didn't register any noise at all. I then ran a 10 m wire out the window. This picked up more noise on aux. I was able to clearly reduce the overall noise (using SDR Console to view), but readability did not increase. I was listening to an AM transmission on 80 m. After some experimenting, I clearly had the noise down by a few S, but also the clarity of the AM transmission. I will try a better antenna, and update my comments.

@BKHD605 4 ай бұрын

How did it go?

@CanadianPrairiesShortwave 3 жыл бұрын

thank you

@brianclimbs1509 2 жыл бұрын

Have you tried adding some extra coax leading up to your noise antenna so the phase setting isn't pushed to the limit? Maybe it could have been matched even better...

@Tommyr 3 жыл бұрын

I use the MFJ 1026, it does the same thing and works very well!

@xszl 3 жыл бұрын

Its the same. Only +200$ for the MFJ name on it.

@hugoalmeida1977 2 жыл бұрын

Obrigado

@DK5ONV 3 жыл бұрын

Very well explained to the World. Thx for sharing this with us. 73's de Your Friend Uncle Günter

@hugoalmeida1977 2 жыл бұрын

Muito obrigado

@marcovL1970 3 жыл бұрын

I was wish to see it connected by ptt on a transmitter would be nice to show us how the ptt connected to example a 11 meter cb radio like jackson 1 or superstar

@Ghostwritersinthesky 2 жыл бұрын

i would like to see a video where this one compares to the QRM-Eliminator model "X-Phase" made by RA0SMS. which one will performs better ? i wonder

@gam67 Жыл бұрын

Where would you place the SWR meter in this case ? Between the TX and QRM Eliminator OR between QRM Eliminator and Main Antenna ?

@Centar1964 4 ай бұрын

Does this go before or after the antenna tuner? I have read both...

@tomcruiser2407 10 ай бұрын

top Video thanks

@marcteigh8633 2 жыл бұрын

The reason the current consumption was lower I am guessing is that in transmit (by-pass mode), I am guessing you are having to energise a relay coil or two.

@kishor_VU2MZT 2 жыл бұрын

HEY GOOD DEMONSTARATION,,, DID YOU MAKE ANY QSO WITH IT ?

@valdyjosedegodoyjunior Жыл бұрын

Congratulations on the video. Your device has 2 gain and one phase knobs. Others have 2 phase knobs and a gain knob. Can you tell what the difference is? Thanks

@petrok1rp254 3 жыл бұрын

How to bypass it for QSK transmitting?

@johnnyphillips9735 3 жыл бұрын

Thanks for the video i really need something like that

@nadiaberthault4653 3 жыл бұрын

Thank you for the video, i ve just bought mine, have a nice day from FRANCE

@OM0ET 3 жыл бұрын

Thank you 4 watching Nadia! 😉👍

@AG8000 2 жыл бұрын

Nice

@georgealbertacanadaeh1038 Жыл бұрын

Good presentation but what if you do not know what the source of the noise is?

@vu3mes 2 жыл бұрын

Is it QRN or QRM? QRM is interference from adjuecent frequency and QRN is noise according to radio lessons I have learned. 73

@socallars3748 Ай бұрын

QRM = (M)anmade interference of any type, QRN = (N)atural sources of noise, such as lightning crashes, atmospheric static, etc. This device may help with QRM from noisy electronics, power poles and the like, but it won't null out the loudmouths talking over your net on 40 meters.

@charlessalard4636 2 жыл бұрын

Can you talk an transmit while receiving.?? Never see anyone talking while it's on??

@AlGritzmacher 2 жыл бұрын

QRN. It's QRN. QRM is man made interference, not electrical noise. A station operating one kHz away from you is QRM. Atmospherice noise, lightning static, wind/rain/snow static, electrical impulse noise from appliances, ionospheric noise is all QRN.

@garys.7846 2 жыл бұрын

Electrical impulse noise from appliances is man made noise - QRM - (M for man made, N for natural) and these units are designed to eliminate that and not QRN such as lightning static crashes.

@ryangassxx 7 ай бұрын

The M and N would suggest that this is the case, but it’s actually a common misnomer. When the Q codes were derived (a long time ago) they had no designation for noise made by 50 or 60hz dirty switching ac devices. The M is actually more along the lines of if an operator is transmitting 1khz above or below and Donald Duck-ing into your conversation. That would have been how “man made interference” was conceptualized back then.. The more appropriate designation for any sort of electrical noise interference is actually always QRN.

@AlGritzmacher 7 ай бұрын

@@garys.7846 There is no little man inside your appliance making it interfere. The electrical noise it makes is QRN. QRM - Man-made interference is other radio signals, intentional, or unintentional, Amateur or commercial.

@eduardopower5254 3 ай бұрын

There's always a "super wise guy" telling this kind of comment. Ego ego ego.

@socallars3748 Ай бұрын

@@AlGritzmacher A man or woman made the noisy, interfering appliance. Ergo, the noisy *RF* emanating from that appliance is manmade. Not naturally occurring atmospherics.

@rogershults5607 2 жыл бұрын

Hello I got a Yaesu FTDX 101 MP QRM Eliminator is turned off can you transmit 200 watts ON it another problem I would have with The qrm Eliminator all my HF antennas come in the House to a big 2K a Ten Tec 229B manual Antenna tuner on the back of my Big Ten Tec 229B antenna tuner I got a coax jumper running to antenna switch box for two different Radios Yaesu FTDX 101 MP ICOM IC 7610 thank you 73

@chilskater Жыл бұрын

how to connect to ptt to ic-706mk2??

@yokede 2 жыл бұрын

I purchased one of these hooked it to my rig expert and on 40 meters when I turn the unit on the SWR jumps from 1.04 to 3.5 so it is unusable for me. Have you checked your SWR with the unit on? Both antennas are 1.04 or better stand alone.

@OM0ET 2 жыл бұрын

Mine is working fine 🙂

@Samogonshik 2 жыл бұрын

Same problem. Is it the random China Quality? maybe you have figured it out?

@mrtechie6810 5 ай бұрын

"If you have the pedal." What pedal?

@ulfunflieger 3 жыл бұрын

Hi Paul, nice device. Did you try this with 100W Power of your ICOM transceiver already? Because this is the big problem with my 7300. Tnx for any hint... 73 by Martin DG4BAD

@OM0ET 3 жыл бұрын

Yes, I did Martin 🙂👍I didn't noticed any problem yet.

@ulfunflieger 3 жыл бұрын

@@OM0ET Hmmm... mine is clicking around with the tx relais at more than 50W on 80, 40, and 20m... 😭. It's then impossible to tune the antenna... Perhaps I try to change the HF-wires inside the device to RG174...

@caspian40 3 ай бұрын

So you can not transmit through this with cb, only hf radio can transmit through this?

@OM0ET 3 ай бұрын

Also CB

@johnratcliffe6438 8 ай бұрын

I bought the WIMO version of this. Useless. It did nothing to get rid of the QRM. It did get rid of wanted signals, which is awful. Main antenna is Steppir DB11. Aux antenna is a small telescopic whip with PL259 connector.

@24nov67 2 жыл бұрын

so you don't need to use the PTT then? will the radio not be damaged if you use without it?

@MrNathanChester 2 жыл бұрын

You need to use the PTT switch if you plan to Transmit otherwise you will cause damadge to the eliminator.

@charlessalard4636 2 жыл бұрын

@@MrNathanChester why would you just listen?? Of course you want to tx..then this is usless.

@MrNathanChester 2 жыл бұрын

@@charlessalard4636 the device is to reduce noise on receive if you are just a short wave listener you wouldn't need the PTT

@alvarogaitan2529 3 жыл бұрын

thanks my friend another good video 73 from kb2uew

@user-qm5vs3ik3b 5 ай бұрын

Przetestowałem to i działa ale musiałem wymienić płytkę ztylu na sztywną alu.

@sinatralala Жыл бұрын

How do you hook this up if you're using ladder line?

@socallars3748 Ай бұрын

Presumably the ladder line is NOT connected directly to your transceiver, right? Place it between the coaxial antenna input of your radio and whatever device (balun, tuner, etc.) you're using to match to the balanced ladder line.

@mxxx8146 Жыл бұрын

Hello, I have this device, unfortunately without instructions. Am CB radio operator. Can you please tell me what I have to connect where and how I set up the device. Best of all, step by step. I thank you in advance. With kind regards

@rallypoint1 Жыл бұрын

Ever get it going on 11m???

@DizziLife 2 жыл бұрын

what is the transformer at the bottom of the primary rx antenna?

@OM0ET 2 жыл бұрын

It is my mini 49:1 UnUn transformer which I use with my small SDR Malchite clone receiver. 😉

@DizziLife 2 жыл бұрын

@@OM0ET thank you for the reply. What use does the balun have on a Rx only setup?

@mcquade_lw 3 жыл бұрын

Cool 👍

@DA-jw6nm 3 жыл бұрын

All you demonstrated was that it does what you describe in that situation. Placement near the noise source is the key and is the problem in the real world. The signal you use is not nor is it similar to a voice transmitted thru a radio. Put together a real life scenario and record and post video.

@OM0ET 3 жыл бұрын

I am sorry but if I had such noisy QTH so believe me I would rather made a real life video than simulated.

@pasixty6510 3 жыл бұрын

Sure, this setup is far from real life. Usually you have no access to the noise source. Otherwise you could simply switch off the noise source… But it works under real life conditions, I tried it. The auxillary antenna can/should be a quite short wire. Ideally it is in no way resonant on the band you want to operate, to avoid picking up the wanted signal instead of the noise. The short (aux antenna) wire then picks up the noise and feeds it into the device to cancel out the noise by reverse phase mixing it into the signal received by the main antenna. That‘s how it works in simple words.

@OM0ET 3 жыл бұрын

@@pasixty6510 Yes, I am not sure if you watched whole video, but same thing I have explained there :)

@brisudamatus 3 жыл бұрын

@@pasixty6510 Common guy... this is just a presentation...don't blame it. I appreciate this video simply because i have noisy QTH and such device could be useful for me so I consider buying it soon.. but i am curious if this work for me. Thanks for video DE OM1ACC

@kylefreemason Жыл бұрын

Seems all this did was magnify the qrm noise.

@antoniocol8206 Ай бұрын

Lol...quelle horreur !

@antoniocol8206 2 ай бұрын

Lol...c est de la merde

@djwright1802 9 ай бұрын

Thank you for telling me about this product in our QSO on Thursday 14th September 2023, as promised I found the video & watched all of it. All looks good 73 de M3TZX

@OM0ET 9 ай бұрын

Thank you Dave, I hope it could help you with your QRM 😉👍