On-Road to Off-Road 12v Cummins Conversion

On-Road to Off-Road 12v Cummins Conversion | Komatsu Bulldozer [EP2]

Рет қаралды 299,412

4 жыл бұрын

VE-Pump to A-Pump for off-road / agricultural use on a 5.9 Cummins 12v diesel!
Subscribe: bit.ly/SubDeboss | Merch: debossgarage.com/merch
Watch next, "Tractomotive TL10 No Start" • Can You Start An Engin...
TOOLS & PARTS USED - Find the best prices using our affiliate links:
Lift Pump geni.us/cummins-4988747
Loctite geni.us/loctite-red
Upper Gasket Set geni.us/upper-gaskets
Gasket Maker geni.us/permatex
M12 Right Angle Die Grinder geni.us/die-grinder
M12 3/8" Extended Ratchet geni.us/m12-38ext
M12 1/4" Extended Ratchet geni.us/m12-14ext
M18 3/4" Impact geni.us/m18-34inch
M18 1/2" Impact geni.us/m18-halfin
@Welker Farms Inc fired 💪Leg Arms💪 but will he stay at Deboss Garage? Only time will tell! #findlegarms
Follow us:
debossgarage.com
/ debossgarage
/ blackjackdeboss
/ debossgarage
/ debossgarage
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada
--
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 273

@DEBOSSGARAGE 4 жыл бұрын

TOOLS & PARTS USED - Find the best prices using our affiliate links: Lift Pump geni.us/cummins-4988747 Loctite geni.us/loctite-red Upper Gasket Set geni.us/upper-gaskets Gasket Maker geni.us/permatex M12 Right Angle Die Grinder geni.us/die-grinder M12 3/8" Extended Ratchet geni.us/m12-38ext M12 1/4" Extended Ratchet geni.us/m12-14ext M18 3/4" Impact geni.us/m18-34inch M18 1/2" Impact geni.us/m18-halfin

@paytenschwartz5015 4 жыл бұрын

DEBOSS GARAGE I have a question about a 24 value Cummins is there’s way I be able to ask you it?

@bigtodd12159 4 жыл бұрын

Looking for a complete dash for a 2001 dodge 2500 all the ones here in Florida are brittle from the sun

@legarms51 4 жыл бұрын

It was a joy hanging out! I just wished I could have helped you finish the job! Love the video friend!

@WelkerFarms 4 жыл бұрын

You guys did awesome work to that dozer! Leg Arms wishes he could have been there to drive it!

@zach5154 4 жыл бұрын

I want a relationship as strong as that Mazda’s radiator support😂

@bgd73 4 жыл бұрын

that is a big value save right there. Best common sense swap I have ever seen.

@colinspencer6187 4 жыл бұрын

Every time Filthy Rich says “Here we go” a Cummins swap is born 👍🏻👍🏻

@thegenerousdegenerate9395 4 жыл бұрын

FYI... that does NOT sound like your yelling "legarms" the first couple times... 😮 lmao!

@somethingsverywrong4666 4 жыл бұрын

Im glad im not the only one who thought that

@jasontruman1215 4 жыл бұрын

Something's Very Wrong me too!!!!

@lory2622 4 жыл бұрын

Feel better now, thank you other observers.

@tinmanstavern 4 жыл бұрын

When does he say legarms? I'm curious now

@79huddy 4 жыл бұрын

Pretty sure he was hollerin Welkers but yeah thought he was hollerin something else to at first

@JasonSmith-vd1sz 4 жыл бұрын

That’s just amazing! Both the bulldozer and truck we’re destined for the scrap pile now look... a very useful machine. Well done!

@ralphmenta249 4 жыл бұрын

This has become one of my favorite channels because of the variety of content. I myself work mainly on gas engines but I learned a lot of skills on diesels when I was in the Army. I enjoy everything from replacing a MAF sensor, all the way down to a full rods/piston/rings rebuild. So long story short, I enjoy Rich getting into a bit of EVERYTHING. Nothing too big or too small. Keep it up

@lory2622 4 жыл бұрын

This makes me even more proud to be Canadian.

@liamjerkins7259 4 жыл бұрын

11:47 my heart was broken for the bucket under the blade...O well...I will live and get over it😁

@Stasiek_Zabojca 4 жыл бұрын

I thought I'm the only one who was sad about this poor bucket =/

@mikkry7525 4 жыл бұрын

The intro feels more like a bromance montage, than a good ol' boys working on a tractor.

@Viperman200221 4 жыл бұрын

DEBOSS..... The king of Cummins swaps!

@Na7ure 4 жыл бұрын

funniest shit ever when he was yelling leggers I had this video playing in my shop and when he said that everyone looked at each other like noooo he could not have said what we think he said and then we realized you were saying leggerssss, shit had us dying because all of our faces were just priceless

@jamesbond9873 4 жыл бұрын

That’s one strong rad support!

@tomanycooks 3 жыл бұрын

I'm really enjoying your videos mate. I'm glad the skid factory did a collab with you

@El_Chompo 4 жыл бұрын

it would be cool to have an army of people like you that were just spread out over every major junkyard putting the good parts together and making things work. there is so much good machinery that gets crushed it's a shame

@CrazyPetez 4 жыл бұрын

“Here we go!” Is Rich’s trademark. I listen for it in every video👍.

@RyanBonnecarrere 4 жыл бұрын

Great editing on the engine and accessories install.

@POLOLOUS3 4 жыл бұрын

Love the analogy construction vs mechanics lol

@austintapia5704 4 жыл бұрын

All your videos are extremely entertaining and educational! Keep it up!

@coolmanfilm199 4 жыл бұрын

*loudest whine ever “Little bit of a belt whine”

@mrolsen6987 4 жыл бұрын

It's always sounds like that for a while when you have got anti freeze on the belts. But in this case it also sounds like it isn't enough tension on them aswell 😂

@avrel820 4 жыл бұрын

I really enjoyed your video they are often very interesting... Your amazing at fixing motors :-) i like seeing you have fun with the machines you fixed when you have finished

@DirceuCorsetti 4 жыл бұрын

That tip is golden. As long as no one is watching you don't have to admit you have no idea what you are doing. When asking for help just blame the last guy.

@unusualelectronic 4 жыл бұрын

No, always blame the apprentice, even if there isn’t one hired in the workplace.

@gethinjones1348 4 жыл бұрын

Smashing the fantastic content videos yet again Rich! 👍

@LaunceBugbee 4 жыл бұрын

Thank you! This was oddly satisfying.

@eprn1n2 3 жыл бұрын

What a great video series! Ripping stuff out! Tearing stuff off. Mayhem everywhere! Ending with a running Komatsu. Very cool.

@t.c.bowling1934 4 жыл бұрын

Waiting for this! Great job!👍

@michaelturner1000 4 жыл бұрын

Shake hands with danger.

@mylifeisdope916 2 жыл бұрын

holy smokes mazda core supports are the strongest thing known to man

@haydenuk02 4 жыл бұрын

Keep up the awesome work thanks for the awesome content

@smithworx1091 4 жыл бұрын

Can't wait to see the 8.3 vids. Just started rebuilding one. Very little vids on those engines

@jenkinsj0672 4 жыл бұрын

We need a VGG & Deboss collaboration!!! Nice hat in the beginning!

@michaelbligh1375 4 жыл бұрын

And vipties and biestplies

@AntonioClaudioMichael 4 жыл бұрын

Great video Deboss Garage

@kx65fast 4 жыл бұрын

older vw tdis from 98 to 03 use a bosch ve pump with electronic control. they seem to be very reliable for its light duty life

@shanewright6958 4 жыл бұрын

Another great video 👍👍

@Adam_Poirier 4 жыл бұрын

Those 8.3 Cummins engines are pretty good. We just bought 100,000 pound capacity forklift that has one in it and it seems to run pretty strong. Rich, have you ever heard of installing lines off of the heater core circuit of a pick up truck with quick connectors and then putting corresponding quick connectors on a given piece of machinery to circulate hot coolant from the truck through the cold engine in the machinery to assist with starting when it’s cold?

@johncuervo3019 4 жыл бұрын

That's awesome you saved the machine from death with just a little elbow grease

@TSGarp 4 жыл бұрын

Nice nod to Vice Grip Garage, another great content source

@scottkernan949 3 жыл бұрын

That was one of the best videos I've ever seen

@SuperMeffer 4 жыл бұрын

Can’t wait to see an 8.3 swap!!! Have one in my 1999 American Dream 40’ motor home. It makes the 5.9 sound like a baby.

@hihaveaniceday9386 4 жыл бұрын

Well no shit the 8.3 is a different class then the 5.9

@PompiisGarage 4 жыл бұрын

I'd call that a win. The dozer moves, and you just beat the snow!

@johnnymelendez4836 4 жыл бұрын

Didn't doubt you for a second. Awesome content🚜🛠🔩🔌⛽🎥HERE WE GO!!👌🗽🇺🇸😇

@captainzoll3303 4 жыл бұрын

so when are you cummins swapping a lambo?

@jdrok5026 4 жыл бұрын

That would be interesting stupid but interesting

@CumminsDriver100 4 жыл бұрын

Lol that would almost work. The torque and weight of the engine would bury that poor little wimp of a vehicle!

@captainzoll3303 4 жыл бұрын

@@CumminsDriver100 if you geared it nice and high though...

@jdrok5026 4 жыл бұрын

@@captainzoll3303 a 12v is still about 1200 lbs. A 4bt is about 750 the new 4 cylinder would work.

@vicfave9984 4 жыл бұрын

Or in a tesla model x lmao

@AntonioClaudioMichael 4 жыл бұрын

Very cool neet trick with the water bottle Deboss

@mattslandscaping4246 4 жыл бұрын

Good job man

@Moonsauc3 4 жыл бұрын

Awesome video

@chrissramek7035 4 жыл бұрын

Great video.

@D3thM3tal 4 жыл бұрын

Dang, I saw that Milwaukee 90* die grinder in your hand and immediately paused the video and went out and bought one with a CP2.0 battery. I've been waiting for that tool ever since I saw it at their event.

@DEBOSSGARAGE 4 жыл бұрын

For field service, its a must!

@D3thM3tal 4 жыл бұрын

@@DEBOSSGARAGE Hell ya, with this purchase the only thing my 220v air compressor will be used for is plasma cutting and filling tires.

@punkrocker10115 4 жыл бұрын

I love my grinder. Only bad thing is it EATS batteries. 🤣 even the new ones.

@jdrok5026 4 жыл бұрын

@@D3thM3tal electric die grinders still have a long way to go.

@musayau3318 2 жыл бұрын

Good work sir

@jaydunbar7538 4 жыл бұрын

OMG THAT ONE PART OF THAT ONE THING IS WORTH THOUSANDS AND SHOULD HAVE BEEN SENT TO A MUSEUM!!

@Jerrydmech 4 жыл бұрын

Great plastic bottle trick!

@cddog1995 4 жыл бұрын

Your oil filters are always dirtier than a vegas floozy.

@DEBOSSGARAGE 4 жыл бұрын

It got a new filter, don't worry. I always do it last in case I bump it or something when installing it. Don't feel so bad poking a hole in the old one

@gullreefclub 4 жыл бұрын

DEBOSS GARAGE “......That way you don’t feel bad about poking a hole in the old one.....” The 64 Kopeck question is which old hole don’t you feel bad about poking a hole in, the Vegas Floozy or the oil filter

@cddog1995 4 жыл бұрын

@@DEBOSSGARAGE I dont blame you. That's smart to do. I'm just tryna be funny lol.

@sepresley1 4 жыл бұрын

wish I had your skills and knowledge.

@Traxxas119 4 жыл бұрын

Vice Grip Garage hat? Nice!

@kevinhache9467 4 жыл бұрын

I was surprised how well the front end of the Mazda pickup held up the dozer

@vicmabus1532 4 жыл бұрын

Take that, Kyle!!

@lsd-25ayahuascadmt7 4 жыл бұрын

DEBOSS GARAGE! Oh Yeah!

@carstrucksntrattors3070 3 жыл бұрын

I think a Cummins swap is the ls swap of diesels swaps and I love it

@masonl8128 4 жыл бұрын

I need a grille for a B4000 Mazda, nevermind.

@carstrucksntrattors3070 3 жыл бұрын

I want to know the story on the side of that truck too

@americanrepair 4 жыл бұрын

There is a difference with the piston style fuel pumps. One is supposed to provide more fuel for the p-pumps and are not compatible with the ve pumps. However they both look identical. I'm definitely no expert but I did read that in a few places.

@mrolsen6987 4 жыл бұрын

So it's here you have been LEGARMS!! 😂 Yeah it always feels better to line Up the dots! Same mindset👍

@Kelly-ig7ci 4 жыл бұрын

Look at the flex that dozer has

@lenn.2907 2 жыл бұрын

“And I’ve never lost anything in my li-“ haha

@sumrandomschmuck 4 жыл бұрын

FUN STUFF!!!

@marcreynolds1796 4 жыл бұрын

Hey Rich From Michigan

@baronoflivonia.3512 4 жыл бұрын

That pick up was Mint.

@DEBOSSGARAGE 4 жыл бұрын

Its for sale. Link is in the description

@El_Chompo 4 жыл бұрын

that graffitti was so funny I did not expect that

@FoolOfATuque 4 жыл бұрын

Excellent function test. Lol!

@AliMackMechanical 4 жыл бұрын

Nice one mate 😂😂😎😎👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@steve062989 4 жыл бұрын

Who else checked their phone at 3:20.

@davedarling6512 4 жыл бұрын

i skipped back to confirm that it wasn't me

@thomasskillicorn1252 4 жыл бұрын

Any one else hear something other than legarms when he first yelled it 😂

@robj2704 4 жыл бұрын

Boy, the apron on that pickup truck is pretty strong.

@joelamb7373 4 жыл бұрын

Nice Job!! Let me know if you wanna work on my excavator next?? 😀😀

@cannonroberts5129 4 жыл бұрын

Someone doesn’t like Kyle!

@Kyletransit 4 жыл бұрын

Cummins powerrrrrrrr

@chazmcclendon7377 4 жыл бұрын

Hey this is Chaz McClendon I love the video with leg arms and I want you to do more videos with him but I want you do only like tractors scared no waters or something like that not like trucks or anything I want to do like a little heavy equipment

@usa_dobson8967 4 жыл бұрын

You sound about 10 times less enthused than your last swap video 😂

@Muffin_Masher 4 жыл бұрын

Who is kyle and what did he do? :-P

@brinkme1772 4 жыл бұрын

he probably cheated on Brenda with her sister.

@zabnat 4 жыл бұрын

Drove a Mazda?

@NatureRecycleFlorida 4 жыл бұрын

Cool

@knice_lil_bro9754 3 жыл бұрын

Ji case uses cummins in their dozer. I've ran one for the last 10 years or so. However I still like a good engine swap story

@kalle8836 4 жыл бұрын

U Said the hydralics is working after testing the blade but isnt the dozers tracks Powered by hydralic motors too? And wouldn’t have been able to move without the hydraulics working

@kevinoscarson2941 4 жыл бұрын

I have a feeling that pto assembly will be coming out very soon. I understand not dumping large amounts of money into a machine you know nothing about, but welding to a heat treated shaft will not last, likely the shaft will snap at the weld. So what we have done in the past is mill(if possible the shaft smooth, then make a splined sleeve to press over the shaft(interference). We then make a new drive for the drive plate or clutch.

@DEBOSSGARAGE 4 жыл бұрын

This will be the yard machine. It will likely see 100-300 hours/year.

@kevinoscarson2941 4 жыл бұрын

No I get it, but we have done the same thing to machines stuck in the field, it does not last long! Good job on the swap, FYI would have done the same thing to test it before making it a money pit!

@3DMeister 4 жыл бұрын

I am a big DG fan! since Greta

@bobbymcbulge18 4 жыл бұрын

I want this dozer

@lsd-25ayahuascadmt7 4 жыл бұрын

Fuck yeah! love your content bud!

@Jagermonsta 3 жыл бұрын

11:48 wanton bucket destruction

@morgansword 4 жыл бұрын

Doesn't LegArms have to have a work visa to be a employee in Canada... just a question as I have always wanted to work there... being 70 doesn't help my chances and I know it was a great skit for youtube. He is a great kid but his skill set won't even match yours yet but he's not finished growing either. All the I know's but don'we usaguys have to get a work visa?? Glad to see that dozer come to life as its miserable working on the gravel when there is a nice broomed floor just a bit away. Always a pleasure to watch you Mr. Deboss

@dylanngatai4667 4 жыл бұрын

Bring back Legarms! -sub from NZ

@D1KHEAD808 4 жыл бұрын

Show me how that yoke slides back and forth again... lmfao

@elesjuan 4 жыл бұрын

Wouldn't be a dodge w/out the belt screaming.. LOL

@mykee426 4 жыл бұрын

Ole girl chooched to life and ran over the Korean rickshaws Bruce Jenner friend. 🤣🤣 you and ole peggin leggin should make vids together.

@JohnDoe-jl3em 4 жыл бұрын

Yo, where can I buy all the ve pumps you don't use?? Lol, give old things new life.

@trentdrummond3147 4 жыл бұрын

10:35 rich runs I fear after releasing Aaron’s on the controls

@codywinchell2454 4 жыл бұрын

Klye is gonna be pissed😂

@elonmust7470 4 жыл бұрын

My old boss would be a youtube sensation if he had had a camera on him for all of those decades of swapping crap around in logging equipment & road tractors..

@rjt1789 4 жыл бұрын

What u think ab 6.2 gas f250? Most ford forums say its pretty bulletproof but under the hood it looks like a rats nest of wires and lines

@technicalitems731 4 жыл бұрын

I apologize if I missed it somewhere. What is the difference in the truck and industrial Cummins engine bore, stroke, compression, and timing? Was the junkyard truck engine cheaper than a heavy equipment junk yard cumins engine? At first I thought you were gonna try to use truck engine power in a dozer and break some bulldozer parts! Hahaha. I own lots of equipment. That’s a nifty little dozer. Some don’t seem to like the d41 in comparison to other brands but I’d take it!