One step closer to getting this thing tuned | Cam and crank sensors installed for coil over plugs.
Рет қаралды 859
11 ай бұрынThis isn't a super in depth video on how to install these sensors, but I figured this video might be useful to someone out there. I will do updates and let you guys know if this setup is going to work. As I mentioned in the video, I might have an issue with cam sync because of the steel gear throwing off the magnet pick up.
Senors:
(ordered from Digi-key)
Cam sensor:
MP100701
(CH396-ND
Crank sensor:
55505-00-02-A-ND
@Khozoh 11 ай бұрын
Awesome video as always, planning on installing a ECUmasters black with the flying lead harness on my 7M-GTE this winter. Nice to see how you did things!
@GtiKyle 11 ай бұрын
Yeah, all the supra info is cool bro, but can we talk about your bicep routine? :D
@mainstreambuilds 11 ай бұрын
Hahaha!!!
@drivenstreetillusions9662 11 ай бұрын
❤ love the journey and tune should make a huge difference
@mainstreambuilds 11 ай бұрын
Thanks for the support!
@2488viper 11 ай бұрын
Hey there! I was wondering if you can do a video on how to loop the power steering lines for a 7mgte? I can’t find anything on it and what lines to loop thank uou! 😊
@mainstreambuilds 11 ай бұрын
Absolutely! It might be hard to see it but I'm happy to try it out.
@gabrielparet5055 8 ай бұрын
Hey i got a quick question, what did you use as an idle air control valve? did you use the oem one or are there any aftermarket solutions.
@mainstreambuilds 8 ай бұрын
I'm still running the factory iacv. It's just under the intake plenum out of sight. It works great with the new standalone. I can open and close it manually with the tuning software.
@deancastillo7 11 ай бұрын
Hey do you have a link to the 12 point trigger wheel!
@mainstreambuilds 11 ай бұрын
So I used an SR-fab 12 point trigger wheel. I'm not sure if you can buy them anymore. I'd just check out their website.
@minishadowikon 11 ай бұрын
This thing is great! im also building this engine in my mk3! What throttle body do you recommend?
@benjaminfifield8838 11 ай бұрын
Cant wait for the next one, im really interested in if that cam gear mod works, im building a 7m with 5m head for my 85 and not really any options for aluminum cam gears without spending a bunch of money on the gear and then having it machined to fit the cam
@mainstreambuilds 11 ай бұрын
Yes I'm in the same boat as well. If all else fails I will just snag a fidanza aluminum gear. I've seen people use the factory cam gears to do this but never heard any feedback as far as tuning or sync issues. I guess there is only one way to find out.
@manutechsolutions6247 11 ай бұрын
Not sure why your going this route when there's proven ways to make serious power minus the headache your sending yourself through.
@mainstreambuilds 11 ай бұрын
Teach me the ways
@manutechsolutions6247 11 ай бұрын
Kinda disappointed
@mainstreambuilds 11 ай бұрын
Haha how can I make you not disappointed?
Sergio Outdoors
Рет қаралды 92 МЛН
Comedy Club
Рет қаралды 7 МЛН
Motoring Masters
Рет қаралды 415 М.
EVERY ENGINE SENSOR EXPLAINED - MAF, MAP, IAT, TPS, 02, NOx, EGT - How it works, location, OBD2 code
driving 4 answers
Рет қаралды 6 МЛН
Uncle Tony's Garage
Рет қаралды 118 М.
Had to have high, high hopes😅🥰 #viral #funny #motovlog #trending #top #motorcycle #shorts #superbike
Ximei Jo
Рет қаралды 7 МЛН
Мотомалышка Алина
Рет қаралды 3,9 МЛН
vazovskie.official
Рет қаралды 2,3 МЛН
Fabiosa Best Lifehacks
Рет қаралды 3,4 МЛН
Дураки на дороге
Рет қаралды 3,8 МЛН