Been using it for several hundred miles. Not a fucking peep! No leaking whatsoever. This stuff works as long as the leak in your car isn't severe.

Well done video! FINALLY! A little too much explaining unimportant things (like how the garage slopes) but still very time and energy efficient! You even explain and show, for those of us who cannot get to the radiator how and why to pour it into the overflow tank! THANK YOU!

Thanks for the video, i will give this a try, i got a 9-3 saab 2008 and is been leaking coolant she has 139k miles.

Just curious, why did you not go with the Bars Liquid Aluminum instead ? Thanks, Gerry

I had a leak on the radiator plastic on top and Around the corner the hose attaches truck was idling when I added the gray part straight into the radiator itself and the poured the rest into the tank and it seems to have worked walked in the house for a minute while it was running and it was completely dry

Thanks!

pepper folks pepper. The good thing about pepper is it dissolves so you don't have to flush the crap out of your cars cooling system when you finally fix the actual issue.

Can it cause any damage after use? It goes in a system and afraid that instead of replacing minor things I will end up paying more at the for big fixes.

What worries me is that it will break down over time and the pieces will go throughout the engine and eventually destroy it.

Hello again on the workbench Thank you for another Great Video. I would like to know how it went since the last top off? Again thank you

did you flush after using it or just leave it in there because i used it on my truck and it worked but i didn't know if i had to flush it out after a while i hace half a year and no leaks

I don’t know about Saab but most every vehicle circulates coolant though the heater core constantly; not when you turn the heat on.

600+ Days! I'd say it works.

i am in the middle of summer, doni nees to ride with the heater on or will it work with my air on? thank u for video

Hi. I just put a new radiator 3 years ago. Drove my Nissan 4 hours each way for work. The car did not heated up but the coolant is leaking very slowly. Would it make any damage to try this?

Can you put it in with coolant already in there .. after pouring in, should I add more coolant?

Crown Vic with a leak under the (metal) intake manifold, 2 bottles, did not work for me.

Doing it today, but new model is up, need an update. And my car is a Buick encore 2016. Any opinions on this car? It's my first car, still paying for it 😮‍💨😮‍💨😮‍💨

Is this okay to use on a 2016 volkswagon passat ? if so , does it go where i put the coolant ?

Hopefully this works for my f150

I hope it lasts me 6-9 months atleast 😅

Can u drive with it in?

So the whole bottle goes in ??

Ok cool. Gonna try this today.

I don’t think I have a leak but when I checked coolant there was none . I replaced the therm, hoses, water pump good. I feel like the next thing would be my radiator ? Would I be safe to use this to prevent overheating ?

It contains sodium silicate so becareful. Once I found the liquid came in contact with my spark plugs and sealed up the ignition points and the next day, the car failed to start and the plugs had to be replaced.

Does this work on any car?

Hi yes I am currently experiencing a bad coolant leak the arrow thing on the dashboard is usually in the center of the C(cold) and the H(hot) but my 2008 Ford Edge just recently a few days ago started leaking little here little there but now has been leaking puddles of coolant under my car and I went to Autozone and I bought a Gallon of Shop Pro 50/50 antifreeze & coolant my car was all the way on the H and started to overheat and basically shut down so I pulled over turned the car off so it can cool down I popped my hood and looked at the coolant reservoir clear tank and there was absolutely no coolant inside so I took out the brand new Gallon of 50/50 I bought I took the cap off the reservoir put in my funnel started pouring in the 50/50 coolant little by little and as I continued to pour it just kept going down the tube of the reservoir like a toilet flushing? I mean I literally ended up pouring the whole gallon of 50/50 in and literally all of it went down the tube there wasn't a drop of coolant in the reservoir? Do you kbow why this is? Is that supposed to happen? But anyway I turned my car on and it was back in the middle between the C and H and I was able to drive home, I pulled up at my house turned off the car and hours later I went out just to turn my car on and check to make sure it wasn't back on the H or anything and the weird thing is that it was all the way on the C(cold) and coolant leaked out some when I first pulled up to my house but throughout the day did not leak as I did not drive it either, than this morning I got up got in my car started driving and it went back up but stayed in the center like its supposed to be so I was happy for that because my engine wasnt overheating and it stayed in the middle as I ran a few errands but on my way home it would go up a little bit towards the H but than back down to the middle so anyways I stopped and grabbed this exact "BAR'S LEAKS High Mileage Cooling System Repair" I have not put it in yet and I also bought another Gallon of Antifreeze Im going to apply both to my car tomorrow morning efore I head out! But can Someone PLEASE!!!! Answer why the whole gallon of 50/50 coolant went right down the tube and didn't stay in the reservoir?? Please I dont understand??

This stuff is bed for your car it clogs flow