OpenVehicleDiag / Macchina-J2534 release 1.0! - powerful open source car diagnostics for all!

Рет қаралды 40,773

Күн бұрын

The long wait is over. After a year in development, OpenVehicleDiag (OVD) version 1.0 has been released! This demo covers both a couple of the features in OVD and shows Macchina's A0 and M2 being used as diagnostic adapters, with both OVD, and Commercial car diagnostic software!
Be sure to check all the links out below:
Links ##
OpenVehicleDiag: github.com/rnd-ash/OpenVehicl...
Macchina J2534: github.com/rnd-ash/Macchina-J...
JSON Schema: github.com/rnd-ash/OpenVehicl...
ISO-TP Scanning paper: dl.acm.org/doi/10.1145/338595...
Macchina Hardware Links ##
A0: www.macchina.cc/catalog/a0-bo...
M2: www.macchina.cc/catalog/m2-bo...
Use offer code "THIS GUY HACKS" for 5-10% off!!
Support my work!##
/ rand_ash
github.com/sponsors/rnd-ash
PayPal.Me/AshconMohseninia
I now accept crypto donations!
Smart chain (BNB):
0x7548bdCD8dE1Cf14C96De452301164bEf58C09e1
Bitcoin:
3KXqtkTwnChpSFtaNDt4WFUZjQmJ3uYZZH
Ethereum:
0x13c77893d05683BAA1e3F0b66109F1BE97beA362
Follow me ##
Twitter: / rndashm
Instagram: / rand_ash_yt
TIMESTAMPS:
00:00 - Intro
00:30 - Current state of car diagnostics
01:27 - Project overview
04:34 - Demo 1 - Code clearing with Macchina M2 (MB W203)
09:12 - Demo 2 - Macchina A0 (MB W246)
10:56 - Demo 3 - ECU Flashing with Macchina A0 (Vediamo)
12:59 - Conclusion

Пікірлер: 56

@ventsislav92makaveev 3 жыл бұрын

What a champ , progress looks amazing

@loremipsum5697 3 жыл бұрын

Thank you for making the world a better place!

@johnnybravo2342 2 жыл бұрын

I love this project! Good job

@chloeleedow7250 11 ай бұрын

I downloaded this video and screen shot the description so I will always have it 😂 looks amazing subscribed will be back to learn a tonne. Someone activated god mode in this guy thankyou my friend!

@seanneal552 3 жыл бұрын

Pretty exciting. Ordering an M2 now!

@abdullahharrabi3899 2 жыл бұрын

OMG GIVE THIS MAN A MEDAL OF HONOR LIKE DAMNNN HE GAVE ME HOPE plus i didnt forgot that caps is on its im that excited

@zebdeming 3 жыл бұрын

Very interesting, thanks for sharing, I may tinker with this. I've been slowly learning how to use my M2

@nevereverlistens 7 ай бұрын

WHat is an M2? Is that your macbook chip?

@constantlychangin 2 жыл бұрын

Awesome! Stuff!!

@Steppinonshii 7 ай бұрын

As a broke guy who is trying to be a mechanic to make some change I appreciate this

@obihornchen6508 2 жыл бұрын

Very cool! However, I'm not sure if I understood correctly: Are the JSON files required in order to run commands on any control unit, or will that also work when the software discovers them?

@ajanthkumarakuruparan5702 3 жыл бұрын

This is so cool ! I'd love to contribute to this project. Will I be able to reset the SRS Aribag module on my Nissan using this and SocketCAN ?

@josesaumell2908 3 ай бұрын

I was able to find OpenPort 2.0 OBD adapter here. It is a pass thru adapter. It worked fine with xentry. It may be available in your country

2 жыл бұрын

Could these JSON files for the ECU data be used for example in Torque or such android applications? Or is it because of the ELM327 OBD adapter that those apps can’t find alot of info from the ECU on my 270 CDI?

@entelekta 2 жыл бұрын

hi, can you tell me which OBD interface is best for MB W218 2010-2011? Or most can? Would like to do chip tuning etc. myself. I would also be happy about a software recommendation! :) Thank you!

@honeybadgeractual5734 2 жыл бұрын

i know this is a year old video, but do you have any interest in data from a Rotunda VCMII, and the FDS (Ford Diagnostic Software) data that may allow you and I to work together to make a linux base open source data set for almost every single make and model of car covered by the SAE and EUR, OBDII standard, possibly even moving into tge newer models as well. my plan is to make use of the Right To Repair laws that have passed recently in the USA to build a software for my personal use both at work (ford technician) and at home (I.C.E. experimental engineering, building, and tuning.) Current project is to build a software that can be run in a linux environment, perhaps RaspberryPi, or Arduino IDE, that can be a standalone unit for scanning, but also installed permenantly in a vehicle to act as a scanner and tuner.

@netguru598 Жыл бұрын

Hi, Where can I purchase your software and where do I get a Macchina m2 from? Please answer

@owlsy1971 11 ай бұрын

hi can we use any obd with this macchina are sold out also im running fedora whats best way to install the software

@RevO-One Жыл бұрын

Could I use a OBDLink SX cable ? (j2534 but not sure about compatibility)

@hightechredneck_0566 3 ай бұрын

This is great, are you still working on it? What about for J1708/J1939 protocols? Trying to read codes on a 2000 Chevy 8500 with a CAT 3126B Diesel engine

@helpmeget100subs 2 жыл бұрын

can you show how gps will work. id like to get wifi to keep track of my work truck issue and where my trucks drove for snowplow

@destrucsean 2 жыл бұрын

I'm in the market for a bidirectional scan tool and stumbled upon your work. Need to reprogram a 2004 Chevrolet Colorado BCM. Any thoughts on achieving this via OVD + Macchina?

@jordananders8525 Жыл бұрын

Here is another project more focussed on bi-directional control. kzfaq.info/get/bejne/fqudfJV-36rdkWg.html&ab_channel=Roudter

@cfvasquez 3 жыл бұрын

Can your software be used to interface with the car functions say to control the A/C from a touch screen head unit? Something like the iDatalink Maestro RR2 adapters for other cars?

@RANDASH 3 жыл бұрын

Technically yes, but practically no. This is meant to be done via the OBD-II port of a vehicle, which tends to be firewalled so you can't send whatever you want over the port. If you know what CAN Frames to send to the A/C control module to control things like temperature, then there is nothing stopping you from hard-wiring directly into the CANBUS network with an Arduino and sending custom CAN Frames. This is similar to what I have already done with my mbux-port project: kzfaq.info/sun/PLxrw-4Vt7xtstJgl7B1ayPXBFBRulu41J

@jordananders8525 Жыл бұрын

Here is another project more focussed on bi-directional control. kzfaq.info/get/bejne/fqudfJV-36rdkWg.html&ab_channel=Roudter

@joeamanfo5970 Жыл бұрын

Hello Rand I have downloaded your software on two of my PC that are running on Windows 7 on 64-bit and genuine on 32 bit but it seems like the program is on able to run could you provide some help please

@josesaumell2908 7 ай бұрын

Very cool. I also have a W246 that is showing "Transmission malfunction" on the dashboard. Would I be able to see the error codes with OpenVehicleDiag and an Arduino with CAN shield? No local sellers of the Macchina adapters in my country. Thanks!

@elishabulalu6980 3 ай бұрын

same here , were you to them error codes on with CAN shield

@sonikempire 10 ай бұрын

Will tactrix open port 2.0 work with this?

@rookei 11 ай бұрын

Hi mate , I've managed to drive my car over my obdstar x300m and ruined it .however the memory card which contains the software is intact . Is there a way that I can run the programs on a laptop or tablet ? 🤔 thanks.

@toxic-tuning Жыл бұрын

Hi, What program are you using to the log the driver? The black screen in the 11:28s

@coverage.account 11 ай бұрын

vediamo 04.02.02

@anthonygharib9316 3 ай бұрын

Does it work on new mercedes models(like 2019 mercedes)?

@pataposhaa.9928 3 ай бұрын

is it possible to connect new key fob with OpenVehicleDiag?

@Roottech25 6 ай бұрын

I like the tool but it doesn't have graphs... it would be nice to see all the sensor live data in one page

@Sid_Sid 2 жыл бұрын

Any way to make this work over K+DCAN cable? I want to make a datalogger for my R53 Mini (ems2000 ecu). Only things available are closed source proprietary crap...

@drewmcclennon7606 Жыл бұрын

came here to ask the same for my R50

@mikan4216 2 жыл бұрын

Can we use this on toyota ?

@anthonygharib9316 24 күн бұрын

Does it work on mercedes c4 SD connect?

@Z-Ack 2 жыл бұрын

But if the obd reader used a correct can bus chipset then no programming would be necessary . You just have to get the right software.. is all in the software and parameters provrammed into the software that coincide with the vehicle’s as built code.. so you dont brick the ecu

@alexluz7023 5 ай бұрын

hope you got your degree... lol Congrats is it possible to make a video explaining how to build a json schema for other brands ??? "I know theres a explanation doc" that would make it real universal and my pcb order build diy .. thx anyway for the open source

@AC-wx6fh 2 жыл бұрын

Not working on w210. I'm using 38 pin connector to plug in a0. Everything's connected, and it's scanning for ISO-TP but can't read any errors. Just says that no ISU-TP capable ECUs were found in my vehicle. Any suggestions?

@RANDASH 2 жыл бұрын

Yes it would never work on a car that old as it has no ECUs that can be diagnosed over CANBUS, only Kline (LIN)

@AC-wx6fh 2 жыл бұрын

@@RANDASH is there anything I can do to read them ECUs with my Macchina a0? Or should I order m2?

@RANDASH 2 жыл бұрын

Hate to say this but pretty much the only thing you can do at this point is get a newer car....A0 doesn't and will never support LIN especially as it's a long dead protocol.

@AC-wx6fh 2 жыл бұрын

@@RANDASH What about M2? Any luck with K-Line implementation?