Ortur 10W Laser Module Review!
Рет қаралды 16,740
Күн бұрын➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero
@TheLouisianaHobbyGuy Жыл бұрын
By the way, this *DOES* have the acrylic light shield, I just didn't need it so I left it off.
@karlriley1314 Жыл бұрын
What happened to the JULY giveaway?? Can't find the link.
@TheLouisianaHobbyGuy Жыл бұрын
@@karlriley1314 5259 other people found it! 🤪 It's in the same place as usual.
@jimmccall4599 Жыл бұрын
rich if your videos were short i would never learn as much as i do. you keep making i will keep watching. cheers
@TheLouisianaHobbyGuy Жыл бұрын
I appreciate that Jim!
@goolowjon Жыл бұрын
Love your videos so much. Thanks for doing them. You have a great radio voice BTW.
@TheLouisianaHobbyGuy Жыл бұрын
Thank you Jon!
@brightsides6581 Жыл бұрын
Hi sir I really appreciate you I considered you as my teacher I am really learning what I wanted to by following your steps Tons of respect and love for you sir
@TheLouisianaHobbyGuy Жыл бұрын
Wow! Thank you so much! I appreciate the comments!
@brooklynbound75 Жыл бұрын
Thanks for another great review.
@TheLouisianaHobbyGuy Жыл бұрын
My pleasure!
@deryckwilliams1848 5 ай бұрын
I just watched your review on the 10 watt laser from Ortur. My wife bought me one for Christmas. They left out a lot of information or just didn't have it. I use a cabinet I bought from Ortur, they never gave any thought to those that use one. That electronic device was a bugger to install. Unlike Ortur, I fashioned a bracket to attach mine. Same as the air line, by now you know you have to push down on that ring to lock in hose. Like you said, they cod have done a better job. My two cents anyway. I have learned a lot from you, thanks.
@TheLouisianaHobbyGuy 5 ай бұрын
Thanks for watching! Hope you have fun with it.
@merrillalbury8214 Жыл бұрын
Glad to see that Ortur has finally got a 10 watt.
@TheLouisianaHobbyGuy Жыл бұрын
Yeah, it's about time they catch up to the market Merrill!
@MO-ws7go Жыл бұрын
Great video, I'm going to order the 10w
@TheLouisianaHobbyGuy Жыл бұрын
Enjoy it!
@IanFlyinGremlinRCNZ Жыл бұрын
Another great video, Thanks Rich. and I would advise next time you go fishing, I would be wearing a hat. I would like to see a video of the fishing side of things. Its great to see other parts of the world from the people whom live in these places rather than just on TV
@TheLouisianaHobbyGuy Жыл бұрын
Thanks Ian! I forgot my hat last week, but not today! I'm going to try and get a video done of a fishing trip.
@lonniedupont Жыл бұрын
👍👍👍 That's a nice replacement
@TheLouisianaHobbyGuy Жыл бұрын
I think so too!
@bobf3598 10 ай бұрын
Ordered this from AE about couple weeks ago. Paid just $170, saving about $120!. Realized it might just be the module, but it came with all the mounting hardware and controller board, even spare lens! Only thing I had to replace was the power supply which was meant for another country. So far, no issues, engraves and cuts way better than the standard LM2 5.5w module. Only grudge is the mounting of controller board. Gonna try and come up with some 3D printed part to make it more secure.
@TheLouisianaHobbyGuy 10 ай бұрын
Yeah, that control board was pushed out with no thought!
@dannymeadows1012 Жыл бұрын
Thanks. I believe the Ortur10w will be my next upgrade from the S9 5.5w this week. I want to gradually work my way up to the big boys.LOL
@TheLouisianaHobbyGuy Жыл бұрын
It's a good choice Danny!
@jerzy2732 Жыл бұрын
Bardzo dobrze pokazane, jest wszystko co potrzeba. Zamówiłem LU2-10 A , jutro dostane przesyłkę. Dziękuje za fajne filmiki , porady będę wykorzystywać. Suba dałem.
@TheLouisianaHobbyGuy Жыл бұрын
Dzięki za sub! Ciesz się nowym laserem!
@stillflicks74 Жыл бұрын
Someone may have already addressed this, but I had the same problem with the air hose not staying put. I had a slightly smaller hose lying around. It was a clear silicone style tube and that fits perfectly.
@TheLouisianaHobbyGuy Жыл бұрын
Mine fits fine, it just doesn't deliver any air. I think I have a clog.
@amrelkhashab9541 Жыл бұрын
Ortur made this Vedio showing the right way to connect the hose kzfaq.info/get/bejne/falihs51uczFloU.html
@ianmclean1317 Жыл бұрын
Hey Rich , Again thank you for a great video - I have be juggling weather I should upgrade to this 10 w laser. And after watching this video I have just placed the order. I must also say I have learnt so much from your other videos. I'm amazed what I can do now with the Laser from watching your videos. I have to ask one question during the video you showed a a picture of the legends of the blues is picture available some where to purchase. My Daughter is a major blues Lover and it would make a great gift for her. Again thanks again. Best regards from Canada
@TheLouisianaHobbyGuy Жыл бұрын
Email me Ian and I'll send it to you.
@JZee49 Жыл бұрын
Thanks so very much this really gives ya something to think about. What air assist module are you using? Even more important how were the fish bitingly?
@TheLouisianaHobbyGuy Жыл бұрын
I was using the Dewallie air assist John. It's going to be part of accessory week, and in fact is the next video. Went catfishing this morning in Lake Salvador and came home with 50lbs. The wife is cleaning them now!
@robmills4709 Жыл бұрын
Hi Rich, thanks for this video, great content. I've been thinking of upgrading and have been intouch with Ortur to ask a few questions as the info on various sites aren't great. I have the Z axis lifter so will need an adapter plate which according to Ortur isn't available. I would have had the circuit board in a case and then mount at the back, as a former electronics engineer the cable management is bad, it really irritates me. I'm used to looming cables and took pride in lacing cables as we didn't use ties. They should design with more thought about retro fitting upgrades.
@TheLouisianaHobbyGuy Жыл бұрын
Agreed Rob! I feel the same.
@jamesneiss9332 Жыл бұрын
I’m really dying for you to review the Xtools D1! When are you gonna do your review on it?
@TheLouisianaHobbyGuy Жыл бұрын
That's up to them James. I have found a lot of issues with the D1 and I'm not getting any answers from them since their focus is on marketing. It won't be long before I throw it in the trash.
@revtoyota Жыл бұрын
Great video!! I have been waiting for this and my fear was confirmed with the new module, it doesn't allow you to use the z height adjustment accessory. One correction though they are called zip ties.
@TheLouisianaHobbyGuy Жыл бұрын
A drill bit will solve that problem!
@krisknowlton5935 Жыл бұрын
Ak Sasquatch, yea, that is the only thing I didn't like but when I have the time I will correct that. Other than that I think it is a great upgrade. I have done a few projects with it and they turned out great. I use a lot of hard maple in my projects and this module cuts through really nice. What took up to 4 passes with the 5 watt now only takes 1 pass with no charing.
@jackhelm9852 Жыл бұрын
Nothing worse than a bald man with sunburn. Worst pain I have ever had. :) I HAVE been waiting for this so thanks. I am looking forward to getting one at some point. Last time I checked they were still sold out of them. Also when I was talking with the company about this head I discovered that it is NOT compatible with the z-axis adapter they sell for the other heads. Hopefully they will come out with one that fits it. Those are really nice.
@TheLouisianaHobbyGuy Жыл бұрын
Whaaat? That's crazy! 🤪 But you know a drill bit makes them all compatible Jack.
@jackhelm9852 Жыл бұрын
@@TheLouisianaHobbyGuy I moved to an Atomstack 20w machine so it is no longer an issue for me, but I think I liked my Ortur better. Had better (finer) point for engraving and much better cable handling. But I am still having tons of fun with it. Hoping to make a business out of it for retirement. Thanks for your efforts to further this craft. Best resource I have yet found for this.
@edkennedy1166 11 ай бұрын
Hi Rich, I love all your videos. I just recently replaced my laser master 2 LU2 2W to the 10 W module. Im loving it. I was concerned about the air assist hose as well, but it worked fine and held in place. Do you have a recommendation on how to do a grayscale test on anodized business cards or dog tags? Obviously, you can't set up that grayscale wheel to be 155 mm. Thanks, Ed
@TheLouisianaHobbyGuy 11 ай бұрын
Yes Ed, in the Laser Tools --> Material Test. While it's not grayscale, you can get fill engrave settings and guestimate from there for some baseline testing.
@edkennedy1166 11 ай бұрын
@TheLouisianaHobbyGuy Thanks, Rich. I completely forgot about that. Much thanks.
@edkennedy1166 11 ай бұрын
@@TheLouisianaHobbyGuy I PMd you a message on your webpage as well, so you can ignore that, but thank you again.
@leroytujeehut2446 Жыл бұрын
Good day..Thank alot of interesting info...especialy in the end......But what's youre info about the lasertree 80w laser module????
@TheLouisianaHobbyGuy Жыл бұрын
I don't have one Le Roy.
@leroytujeehut2446 Жыл бұрын
@@TheLouisianaHobbyGuy OK Thank U..
@Jerry-Mesa Жыл бұрын
Hi Rich, thanks for the informative review. What I was hoping to learn was if this module can be used on the ‘older’ systems, specifically the LMP2 in my case. Perhaps a “short” 😂video on this topic would be of interest to your followers if the 10w can be added to them. Thx
@TheLouisianaHobbyGuy Жыл бұрын
I thought I mentioned it was compatible with the LM series? The instructions have info on all of their lasers.
@Jerry-Mesa Жыл бұрын
@@TheLouisianaHobbyGuy Thanks, I may/must have missed it.
@krisknowlton5935 Жыл бұрын
I installed mine on the LM2 Pro in about five minutes and was off and running. There is no software upgrade so this is a really simple upgrade.
@Jerry-Mesa Жыл бұрын
@@krisknowlton5935 Thanks Kris, I’m having a major issue with NEJE A40640, never has fired so trying to return but getting the run around. Dealing with their support for 5 months. This seems to be a simple option then.
@Test-dv1jl Жыл бұрын
Great review. Since I'm originally from Louisiana and grew up fishing in Plaquemines Parish for speckled trout and redfish I love to see some fishing videos. So I recently purchased the Aufero 2 as an intro laser to learn about them. I using Lightburn since it seems to have many more compatible file types. My biggest issue is the fumes. I live in MN and of course, it's -8 degrees currently outside so opening windows to exhaust the fumes is not possible. What is the best solution in your opinion??
@TheLouisianaHobbyGuy Жыл бұрын
In my other shop I have an exhaust fan that vents to the outdoors. At the wall, where it passes through, I have a fitting that only allows one way of flow, and I have it wrapped in insulation. This is the best solution IMO. It's sort of like a dryer vent.
@jnick67a Жыл бұрын
Hi Rich. Great video review. My module should be here is a day or two per tracking. Would you happen to know if the Laser Head Focusing Controller for Ortur Laser Master 2 Pro S2 can be modified to accept the 10w? I can revert back to the stock Z bracket if I have to. Thanks.
@TheLouisianaHobbyGuy Жыл бұрын
Anything can be modified to work Jim, it's just about how much mods you need to do. At the very least, the mounting plate would need to be drilled.
@Giovanni-hh2jg Жыл бұрын
Great video as usual! I am one of your followers and I have learnt a lot watching your videos, thank you very much for that! I watched this video only few days ago because I bought the 10W laser head only recently, but I'm having a problem with it. I have also the Ortur 5.5W head and when I use it to engrave ceramic tiles with the Norton method, blacks are much blacker than with the 10W head, even using it at 100% power. Most of the images engraved with the 10W head, whatever power or speed I use, are grey. Instead, with wood I got excellent results. Do you have an idea of what happens? I hope to have been clear enough, my English is poor. Thanks again and regards from Italy.
@TheLouisianaHobbyGuy Жыл бұрын
Try posting on my free forums Giovanni. lahobbyguy.com/bb
@Giovanni-hh2jg Жыл бұрын
@@TheLouisianaHobbyGuy Just done! Thank you
@muppetarms8406 Жыл бұрын
Hi just watched this a second time, now that I have the upgrade as well. just after the ten minute mark I was wondering what the white cable management clips where or where I can get them from?
@TheLouisianaHobbyGuy Жыл бұрын
Those came with the Aufero laser. You can buy them here: amzn.to/3F34XTk
@trevaturpin5229 Жыл бұрын
If you find out how to put the air assist hose in please do a video on that.
@TheLouisianaHobbyGuy Жыл бұрын
You just put it in the top of the module and press it down Treva.
@georgekenner6588 Жыл бұрын
Would love to see fishing...
@TheLouisianaHobbyGuy Жыл бұрын
Maybe I'll sneak in a clip here and there George!
@kevinneubert2068 Жыл бұрын
I would love seeing a fishing video.
@TheLouisianaHobbyGuy Жыл бұрын
Awesome! Might be a little tricky to get video on the boat, but I'll try Kevin!
@donshields6749 Жыл бұрын
Have you done a review on the lm3?
@TheLouisianaHobbyGuy Жыл бұрын
I'm still testing it. My laser reviews get extensive testing before I have an opinion Don.
@flaviob4302 Жыл бұрын
Hi Rich, will you post on your forum the .clb file for this module? Thanks
@TheLouisianaHobbyGuy Жыл бұрын
You can use any 10W clb Flavio until I get around to it.
@axeldejesus2060 Жыл бұрын
I'd love to see a fishing video. LOL
@TheLouisianaHobbyGuy Жыл бұрын
I think I might start another channel for my other hobbies Axel.
@timfrench483 9 ай бұрын
Hi Rich, Your 10W laser module review was great. I have 2 questions. 1. The instruction sheet says to go to laser GRBL, go to configuration, and change the value of $131 to 390. Also, there is a push button switch on the top of the module next to the cable that plugs into the module which seems to do nothing. Do you know what this switch is for? Thank You for your help.
@TheLouisianaHobbyGuy 9 ай бұрын
$131 is the max travel on the Y Axis, and depending on your model, it may need to be changed. There is no switch that I know of on the module. There's the plug for the power and the plug for the air assist line.
@deadlight2002 10 ай бұрын
I hope you can answer this but I got the LU2-10A and installed it. Everything works but in the laser grbl model setting under the laser grbl settings DB the LU2-10A doesn't show up on there. What laser model do you suggest using in place of the LU2-10A? Thank you so much for the video and the answer.
@TheLouisianaHobbyGuy 10 ай бұрын
I don't have an answer for this. I would suggest contacting Ortur.
@Test-dv1jl Жыл бұрын
So, the 10w laser is on sale at my local Microcenter do you recommend it over the stock 5.5w LF? I intent to both engrave and cut varieties of materials. Also, I seem to be having difficulty finding free laser engraving/cutting test files any recommendations? Thank you in advance.
@TheLouisianaHobbyGuy Жыл бұрын
Yes, absolutely. The Universal test card is free on my forum, and you can use the material test built into Lightburn as well.
@lennieschoonover2620 Жыл бұрын
Hi Rich, do you think the 10W unit will fail sooner than a 5W unit? I have concerns that I would have to buy a replacement 10W head sooner, as it may only last half as long as the original 5W due to heat
@TheLouisianaHobbyGuy Жыл бұрын
Nope, they're designed with the necessary air flow. I have hundreds of hours on my A40640.
@daytonglassguy3030 Жыл бұрын
Is there any reason to believe that a OLM2 Pro upgraded with a 10w module would not perform similarly up to 9000mm/min? Is there any loss in detail from instability of frame the OLM2? Thanks. Great videos.
@TheLouisianaHobbyGuy Жыл бұрын
The LM2 Pro is capable of up to 10,000 mm/min.
@willroark8624 6 ай бұрын
So upgrading to this module from my LU2-2 will not cut down on engraving time? I generally engrave 7x8 inch Monograms at 600-800mm/m @ 100% on 15x11 cutting boards and they take 2+ hours each.
@TheLouisianaHobbyGuy 6 ай бұрын
If you're upgrading from the 5.5W module it will.
@baronleathercraft Жыл бұрын
Thank you for this very informative video. This exact set up is on the way to my house. I have 2 questions. 1. I need to get an air assist. As you pointed out this laser comes equipped with air assist so if I understand correctly, I should only need a pump and not a complete kit. Can you recommend a pump or what power of a pump I should get? Question 2. Which honeycomb surface do you recommend? I do not need one as big as yours. What is a good size for the Aufero Laser 2. Thank you so much! I am a newbie trying to make sure I get the right equipment. Thank you again!
@TheLouisianaHobbyGuy Жыл бұрын
Any air pump with a 30L per min flow will work fine. Comgrow makes a good metal honeycomb bed at 400x400 that will work. If you want to use magnets, it needs to be metal and not aluminum like most.
@baronleathercraft Жыл бұрын
@@TheLouisianaHobbyGuy Thank you very much!
@baronleathercraft Жыл бұрын
@@TheLouisianaHobbyGuy Plus, I plan on working with leather. Do you know if there is an encloser for the Aufero Laser 2. that works. I hear leather can get kind of smelly. :) Thank you once again.
@TheLouisianaHobbyGuy Жыл бұрын
@@baronleathercraft Comgrow makes a 400x400 enclosure that fits it.
@baronleathercraft Жыл бұрын
@@TheLouisianaHobbyGuy Awesome! Thank you for the info. :)
@jamilashley Жыл бұрын
Would the z axis bracket work with the z axis lifter sold separately?
@TheLouisianaHobbyGuy Жыл бұрын
I really don't know Rex. I'm told not, but I haven't tried it.
@Sam1970Sam 10 ай бұрын
hi thanks for the video ... like you!!! perfectly engraves.. How can I find out what parameters you set for glass engraving , can I find out ? or do you have a video clip :? I have a 10A machine, Artur Lazer Master 2 PRO S2.. tried on glass but does not engrave.. Maybe I'm doing something wrong. It works fine on metal..
@TheLouisianaHobbyGuy 10 ай бұрын
For glass with this laser you need to coat it with Tempera paint.
@Sam1970Sam 10 ай бұрын
@@TheLouisianaHobbyGuy thanks
@Sam1970Sam 8 ай бұрын
@@richiesrestorations4883 it is necessary to apply to the glass Paint for furniture odorless wood chalk matte
@floridalove Жыл бұрын
First of all, thank you Rich for another very informative video! What bothers me about Ortur is the fact that they throw this module on the market without sufficient background information on the compatibility of previous models. e.g. Can I use the module on my LM2 Pro S2? Do I have to use this included universal board? Do I need a different power supply for it? Can I continue to use my purchased Z-axis height adjustment? Surely there are more such questions from other users. I slowly suspect that they would rather sell the new OLM3 than the module as an upgrade for older models.
@TheLouisianaHobbyGuy Жыл бұрын
You can use it with any LM2 Pro or Aufero Laser 2. It comes with the 2nd power supply. You do have to use 2 power supplies with the adapter board, and it doesn't fit the Z adjuster unless you somehow customize it.
@floridalove Жыл бұрын
@@TheLouisianaHobbyGuy In the video published today by Ortur Official entitled: "Assembly Method of Four Laser Modules on Ortur Laser Master 2 Pro S2", ONLY the supplied new connection cable is connected to "L" on the OLM2 Pro S2. There is no mention of the circuit board enclosed with the laser shown in your video, nor of a different power supply. That irritates me a bit now.
@williambulloch8370 Жыл бұрын
@@floridalove You can connect the Ortur LM2 Pro S2 (and only the S3) directly tp the "L" Connector. You will need a 24V 4amp power Supply though.
@floridalove Жыл бұрын
@@williambulloch8370 Thanks for your reply, but it has since been resolved. I bought the OLM3 and it was shipped yesterday.
@axeldejesus2060 Жыл бұрын
Hello Rich. I purchased an Ortur Master 3 that should be coming in tomorrow and am very excited. Before I buy an air assist pump for it I'd like to know if I can use an air compressor. I have 2 compressors, a small one with a maximum PSI of 58 which I cannot control and a regular 2 gallon compressor with a Maximum of 210 PSI, this one I can control the output to the tool I am using. If I can use any of these I'd like to know what adapters I need to buy, I know the OD of the hose is 6MM and ID is 4MM but do not know how to connect it the the laser head, I'd appreciate your suggestions. Thanks
@TheLouisianaHobbyGuy Жыл бұрын
First you would need a regulator to govern the psi to 9-15. Anything over that will defeat the purpose and prevent the laser from burning. And then you would need a splitter: amzn.to/3NOTQjS to attach the hose and reduce it.
@coregeek Жыл бұрын
I'm looking for help with my upgrade. I have it connected correctly (quadruple checked) and the circuit board shows the blue light for 24v lit. The laser on the other hand is not powering. Can you confirm the fans and red light should be on at power up?
@TheLouisianaHobbyGuy Жыл бұрын
On mine they are.
@coregeek Жыл бұрын
@@TheLouisianaHobbyGuy Okay. That’s what I was afraid of. Looks like mine is DOA. I appreciate the reply and thank you for this video as well. 🤗
@TheWarhawkxpres Жыл бұрын
Hey Rich! I know all about getting burnt fishin! I am having a hard time with my cord management. Mine drags the board and am not sure how to support them. Please Advise. "If you're too busy to go fishing.... You're just too damn busy!"
@TheLouisianaHobbyGuy Жыл бұрын
A split loom casing solves the problem and a couple of zip ties to hold it in position Tommy: amzn.to/43jMThD I'm never too damn busy! 🤪🐟
@stevebowers1629 Жыл бұрын
So my wife bought me the S2 Pro with the LU2-4-LF module. If I understand your video correctly, I can buy just this upgrade and replace the board and module and still use the rest of the machine?
@TheLouisianaHobbyGuy Жыл бұрын
Yes you can, but I would wait until mid-December if I were you Steve. I just got the Comgrow 20W module, pre-release, and it'll come in around the same price, with adaptation for Ortur!
@seemayadav8950 4 ай бұрын
Hi there is issue in Engraving while i am doing it first it is Engrave to dark even at 10% power. And only out side of the image or text Engraving not all fillings inside it. Can you please guide me.
@TheLouisianaHobbyGuy 4 ай бұрын
I'm not sure what would cause this, sorry.
@sandybanker3213 Жыл бұрын
Which do you like better the NEJe laser tree 80w or the Ortur 10w?
@TheLouisianaHobbyGuy Жыл бұрын
I don't have the laser tree 80W, I have the A40640 Neje. The Neje outperforms any other 10W I have.
@jwmappleby Жыл бұрын
rather than spending $250 on the cheesy rube goldburg tie the board on the side approach I purchased a 'refurbished' lm2 pro s2. this lets you slide on a new gantry and 10a laser module, but most importantly you get the s2 control module and cable set to replace the old lm2 pro module and cable. a much cleaner approach for a few dollars more.
@TheLouisianaHobbyGuy Жыл бұрын
Awesome!
@danharrier3618 Жыл бұрын
Rich, I ordered the new module, leaving me with an unused 5w diode. Can I use this on my original laser master, the one without the track?
@TheLouisianaHobbyGuy Жыл бұрын
The original LM & LM2 are 12V, and the LM2 Pro is 24V, so to use it on the original, you would need a separate power supply for the laser and would have to disconnect the red pin from the control wire Dan.
@danharrier3618 Жыл бұрын
@@TheLouisianaHobbyGuy Thank you for taking the time to reply. I watch all your videos, and am getting much better with Lightburn as a result.
@pieciek Жыл бұрын
Where can i buy this orange safety box? I want to use my ortur laser 2 without glasses
@TheLouisianaHobbyGuy Жыл бұрын
It's not an accessory, it comes with the module.
@karlriley1314 Жыл бұрын
Do you think this will work on the AUFERO 1??
@TheLouisianaHobbyGuy Жыл бұрын
I don't know Karl.
@MONKEY-vi7hx Жыл бұрын
Which is best Neje, Ortur or sculpfun?
@TheLouisianaHobbyGuy Жыл бұрын
That's going to be a personal choice.
@marcyvanbeaulieu5109 Жыл бұрын
Merci pour tes vidéos. Petite question..as-tu déjà vécu ce problème de la double brûlure au début et à la fin d’une gravure? Ça cré une ligne noire qui déguise le travail. Merci!
@TheLouisianaHobbyGuy Жыл бұрын
Vérifiez et assurez-vous que l'entrée et la sortie ne sont pas activées sur Marc.
@marcyvanbeaulieu5109 Жыл бұрын
@@TheLouisianaHobbyGuy et je vais où pour m’assurer de ça? Merci!
@TheLouisianaHobbyGuy Жыл бұрын
Double-cliquez sur le calque Marc, puis cliquez sur l'onglet avancé.
@wakeupgeoff Жыл бұрын
I wish the laser fan wasn’t so noisy. Hopefully they’ll adjust the firmware to slow the fan down when the laser isn’t firing.
@TheLouisianaHobbyGuy Жыл бұрын
I did notice it slows down after a job.
@wakeupgeoff Жыл бұрын
@@TheLouisianaHobbyGuy awesome. I’ve pre ordered the Laser Master 3. Will build an enclosure for it I think. Thanks for the detailed review!
@TheLouisianaHobbyGuy Жыл бұрын
@@wakeupgeoff I have one on the way right now. I personally would use one of the grow tent style enclosures. They work well and they're cheap!
@mikenewell43 Жыл бұрын
What cut setting library would be best for this laser?
@TheLouisianaHobbyGuy Жыл бұрын
The one for the LM3 10W.
@mikenewell43 Жыл бұрын
Many thanks that's perfect 👌
@csganley Жыл бұрын
Thanks for another great video. I have the LM3 10W and I cannot even cut the thin basswood (1.5mm) at 360mm/m 100%! If I force it out, it splinters. That setting barely scores the wood on 3mm ply. What am I missing? I use the little 'kickstand' for focusing and I have tried raising and lowering also. Thanks!
@TheLouisianaHobbyGuy Жыл бұрын
Lens has to be perfectly clean and focus has to be right. Try running a ramp test: kzfaq.info/get/bejne/qcx3n714zc6VZGg.html
@csganley Жыл бұрын
@@TheLouisianaHobbyGuy Thanks! After watching both of these videos twice and running the ramp test, I've made a little progress. I can now cut 1.5mm basswood with 1 pass at 360 & 100% I looked at the lens but I'm not sure how to tell if it is perfectly clean. The tube and the orange cover are clean. For my ramp test, I elevated one end of the wood 8mm. I ran it 3 times, once focusing with the kickstand on the far left, once in the middle, and once at the far right. All three passes resulted in the focus position being the thinnest line. I did notice that you have Constant Power Mode turned on, so I turned that on, but I'm still nowhere near cutting through 3mm ply. I am using air assist. I've cut at 300, 200, 100, and 50 all 100% and the wood is barely scored. If you closed your eyes and ran your finger over the 'engraving' you wouldn't feel anything. I cleaned everything again and ran the test over with a 1 mm lower focus. Same result.
@TheLouisianaHobbyGuy Жыл бұрын
Try lowering your speed to 200.
@csganley Жыл бұрын
@@TheLouisianaHobbyGuy I've cut at 300, 200, 100, and 50 all 100%, and the wood is barely scored. If you closed your eyes and ran your finger over the 'engraving' you wouldn't feel anything. I've tried a couple of different types of plywood (one being birch) but the results are the same. I can cut through the thin (1.5 - 2mm) DollarTree basswood at 400 speed 100% in 1 pass. It barely burns the waste board and doesn't just drop out, but with just a slight push, it pops out with no splintering.
@TheLouisianaHobbyGuy Жыл бұрын
Your lens may be dirty.
@marcyvanbeaulieu5109 Жыл бұрын
Où prends-tu ces attachés blanc qui tiennent les fils derrière l’axe X? Merci
@TheLouisianaHobbyGuy Жыл бұрын
amzn.to/3iZlobe
@Test-dv1jl Жыл бұрын
Also, we moved from NOLA to north NJ I detect your accent is south Jersey or Philly??
@TheLouisianaHobbyGuy Жыл бұрын
Close! Brooklyn, but mostly gone now after 37 years in NOLA. Now folks guess Chalmation!
@preissasaf 9 ай бұрын
Hi everybody. I replaced my laser head unit to a new LU2-10A laser head unit and connected it to my laser device, model OLM2PRO S2. I uploaded a file using the LIGHTBURN software and... the laser does not engrave. I've attached a video. Does anyone have an idea what to do? I would appreciate any suggestion.
@TheLouisianaHobbyGuy 9 ай бұрын
You can't attach videos, but you can open a support ticket: ortur.tech/support/
@williambulloch8370 Жыл бұрын
I'm under the impression that you do not need to go through the Universal Adapter Board or use the extra Power Source if you have the 24 Volt Ortur LM2 Pro, yet the several videos I have seen all show them being connected via the Adapter without mentioning that they are connecting to a 12 Volt System. I just connected mine directly to the Laser Module. Am I wrong?
@TheLouisianaHobbyGuy Жыл бұрын
Yes, you are William. When connected, the LU 10A requires 2, 24V power supply inputs for full power.
@williambulloch8370 Жыл бұрын
@@TheLouisianaHobbyGuy I was concerned about this, since mine seems to be running just fine connected directly to the "L" Connector(I'm using a 24v 3amp Power Adapter derived from (24v/10w=2.4amps). I had read somewhere during the early promotion of the LU2-10A that it was for the 24 volt system and that they were coming out with an adapter to support the 12 Volt Systems. Since no where on the Internet nor the Owner's Manuel does it say this and now you are confirming it, I contacted Ortur and Gil replied that the OLM2 Pro S2 (and only the S2) is connected directly to the "L" connector and you will need a 24v 4amp Power Adapter.
@brendathornton7770 Жыл бұрын
I have the NEJE master 2. I have burned with it before, but for some reason I try to burn a 2 inch picture it tells me it’s outside the boundaries. Help,,,please
@TheLouisianaHobbyGuy Жыл бұрын
Search my channel for *origin* Brenda. You can ignore the message though.
@brendathornton7770 Жыл бұрын
@@TheLouisianaHobbyGuy I allready watched that one, it didn’t cover my problem. My problem is I have lost my grid. My numbers across the top are like -1289 and about the same on the side.
@TheLouisianaHobbyGuy Жыл бұрын
@@brendathornton7770 Well it sounds like your device settings are wrong Brenda. You probably have the wrong working size.
@SamKGrove Жыл бұрын
A hat is your friend when you are out in the sun.
@TheLouisianaHobbyGuy Жыл бұрын
I didn't forget it today Sam!
@AG-cg7lk Жыл бұрын
I just installed this laser on my LM2 Pro and it doesnt even get close to cutting 3mm ply with the settings you tested. Not sure where I'm going wrong. Are there new laser settings I need to put into lightburn for it to use the full power of the laser vs the stock laser? I have both PSUs connected.
@TheLouisianaHobbyGuy Жыл бұрын
Did you run a ramp test? You need to have a good focus.
@AG-cg7lk Жыл бұрын
@@TheLouisianaHobbyGuy I just did a cut test using the material test tool. Im able to cut 4mm ply at max 340mm, when running 90%, 3 passes. Is this about expected? Was focused using the built in folding arm. Text is clear and looks good.
@TheLouisianaHobbyGuy Жыл бұрын
Try running a ramp test for the focus.
@AG-cg7lk Жыл бұрын
@@TheLouisianaHobbyGuy Ramp test indicates the included fold down spacer is on the money
@AG-cg7lk Жыл бұрын
Can anyone confirm whether my results above are about right for this laser in terms of power/speed?
@merrillalbury8214 Жыл бұрын
Sent an email to them asking if it fits the lasermaster 2/2S.
@merrillalbury8214 Жыл бұрын
I should have read the bold type at the top. Says 2 s2 2 pro.
@TheLouisianaHobbyGuy Жыл бұрын
Yes, and there are 3 custom interface plugs for almost any diode laser.
@minravex9919 Жыл бұрын
Please sir can I cut 18mm mdf...at what settings
@TheLouisianaHobbyGuy Жыл бұрын
Highly doubtful Minra.
@minravex9919 Жыл бұрын
@@TheLouisianaHobbyGuy can u try it pls ?
@TheLouisianaHobbyGuy Жыл бұрын
@@minravex9919 No, it won't work. MDF is too dense.
@johndiego3105 Жыл бұрын
Do you fresh water or saltwater? And getting a bad sunburn sucks!!
@TheLouisianaHobbyGuy Жыл бұрын
All brackish waters here on the bayous John, so a little of both? 🤪
@johndiego3105 Жыл бұрын
@@TheLouisianaHobbyGuy best of both then!!
@TheLouisianaHobbyGuy Жыл бұрын
@@johndiego3105 Yes Sir!
@WoodWorkersCreed Жыл бұрын
Will it fit on aufero laser 1?
@TheLouisianaHobbyGuy Жыл бұрын
I don't think so.
@WoodWorkersCreed Жыл бұрын
If you would buy a laser todsy ortur master 3 with 10 w laser or xtool d1 pro 20 w. What one do you think is best option.
@TheLouisianaHobbyGuy Жыл бұрын
@@WoodWorkersCreed I wouldn't buy either. The Neje 3 Max is the best value for the $ IMO with the most features.
@roberts5erauedu Жыл бұрын
what are you fishing for over there? redfish? lets see a video
@TheLouisianaHobbyGuy Жыл бұрын
We love catfish, so we pretty much stick to our spots, but we'll occasionally head out for some drum and fish for reds.
@merrillalbury8214 Жыл бұрын
I got an email from Ortur that said the 10 watt laser fits the lm2s, lm2 pro but the back plate does not fit the lm2. I would have to 3d print one that fits.3d print my comment. Otherwise it would work.
@TheLouisianaHobbyGuy Жыл бұрын
You could just drill out the mounting plate to fit.
@BurnDaddy Жыл бұрын
Rich, it sounds like you need to start collecting HATS for a new hobby! Speaking as a proud member of the Follicly Challenged Club, I literally felt your pain when you showed your peeling scalp.
@TheLouisianaHobbyGuy Жыл бұрын
🤪 I actually have quite a large hat collection! Just forgot to bring one last week John. I didn't forget today!
@bakker4420 Жыл бұрын
Hat my friend... Haaat!! ouch!
@TheLouisianaHobbyGuy Жыл бұрын
I forgot it last week!
@chucklenz9011 Жыл бұрын
I’m told by good authority that each hour/day spent fishing is added to your life span.
@TheLouisianaHobbyGuy Жыл бұрын
You can say that again Chuck!
@patrickziegler4071 Жыл бұрын
those are not twist ties.... Zip ties or cable ties...
@TheLouisianaHobbyGuy Жыл бұрын
🤪🤪
@karlriley1314 Жыл бұрын
Need to wear a HAT while fishin. Sun is bad on the head.
@TheLouisianaHobbyGuy Жыл бұрын
Usually do Karl, forgot it last week!
@marcyvanbeaulieu5109 Жыл бұрын
Après quelques essaies où le laser s’est bourré de poussière et à graisser orangé la plaque de découpe, j’ai premiérement replacé le tuyau d’aération que j’avais mis trop creux dans son emplacement. 2: après nettoyage, je l’ai reparti sans le protecteur oculaire et il se graisse beaucoup moins puisque la poussière n’est plus prisonnière à l’intérieur. Mais, après 4 gravures et découpes j’ai dû la nettoyer encore puisque la lumière faiblissait. 3: la sortie de la buse est trop large. Si elle était plus fine, le laser se salirait moins vite et là je prend en comme l’exemple entr’autre celles de mes sculpfun et autre sur le ortur. 😉🥲
@TheLouisianaHobbyGuy Жыл бұрын
J'ai enlevé la couverture acrylique Marc et cela semble bien fonctionner pour moi. Assurez-vous que le tuyau d'air est correctement installé dans le raccord.
@marcyvanbeaulieu5109 Жыл бұрын
Merci à toi!
@marcyvanbeaulieu5109 Жыл бұрын
Là, il travail très bien. Par contre, j’ai 60 plaquages à faire et après nettoyage de la lentille il grave bien et coupe du 3 mm en une passe mais après ça la lumière faibli en capacité et suite à 4 plaques, je dois le renettoyer. J’ai 16 plaques de faite et je l’ai netoyé 4 fois pour garder la même qualité de gravure.
The Louisiana Hobby Guy
Рет қаралды 6 М.
Casual DIY
Рет қаралды 22 М.
SOFIADELMONSTRO
Рет қаралды 63 МЛН
Introducing the Roly LaserMATIC 10! The NEW KING of the 10W diode lasers! A superior laser engraver!
The Louisiana Hobby Guy
Рет қаралды 33 М.
The Louisiana Hobby Guy
Рет қаралды 22 М.
The Louisiana Hobby Guy
Рет қаралды 37 М.
The Louisiana Hobby Guy
Рет қаралды 33 М.
Baron Leather Craft
Рет қаралды 2 М.
Özden Söğüt
Рет қаралды 13 МЛН