Ortur

Рет қаралды 4,255

Жыл бұрын

Please watch as I engrave my chrome plated brass Zippo lighter (not stainless steel) using my Ortur laser master 3LE, , (Time lapse video of burn) this laser machine is perfect for hobbyists and professionals alike, with many safety features and fast engraving/cutting, this will do anything you ask of it, with its high-quality build and amazing precision including its safe operation features, the Ortur laser master 3LE is just right for you. #laser master 3
Please check out links below in the description:
My Facebook page where you can see many examples of work done:
/ lightworkz.graphicdesign
• Laser Engraving
If you're interested in purchasing the Ortur laser master 3 LE engraver or software I use, please check out the links below.
Ortur laser master 3 / laser master 3 LE:
ortur.net/products/ortur-lase...
Software that I would recommend:
ImagR: www.imag-r.com/
Lightburn: lightburnsoftware.com/
#laser #engraving #ortur #laserengraving #lasermarkingmachine #engravingmachine #orturlasermaster2 #glassengraving #gifts #engraving #engravingmachine #facebook #youtube #youtubeshort #youtubechannel

Пікірлер: 25

@larrys_truth 2 ай бұрын

worked great,thank you

@lightworkz61 2 ай бұрын

Hi & thanks, I'm happy that my vid helped, I just subbed ya ;) many thanks for the comment my friend.

@tuschki78 9 ай бұрын

Wow! 👍🏻 what did you used to wipe the zinc spray off the surface after engraving? Thanks

@lightworkz61 9 ай бұрын

Hi & thanks ;) I just used thinners, it comes off very easy, but be careful as the zinc spray is NOT good for you, please use in a well-ventilated room ;) Thanks for the comment ;)

@mulanjamilah7849 Жыл бұрын

very beautiful. I'm a beginner in carving and succeeded but with simple images. where can i get such pictures? I want to try with a more complicated image im hands engraving

@lightworkz61 Жыл бұрын

Hi & thanks ;) I find all my images from google search, it take a bit of time but just about anything can be found ;) I change most of my images just a little to match my needs. Thanks

@mulanjamilah7849 Жыл бұрын

@@lightworkz61what is the search name on google?

@jpparker19 6 ай бұрын

Is your the 10W or 20W M3? I've tried this six times with my 10W M3 with no success. When I clean it with primer, the image wipes away.

@lightworkz61 6 ай бұрын

Hi & thanks, I used the 10w lm3 for this project, if you use the zinc spray paint and use my settings, it should work my friend.

@jpparker19 6 ай бұрын

I tried with rustoleum cold galvanizing compound (zinc). No change. The design wipes off with acetone.

@lightworkz61 6 ай бұрын

@@jpparker19 Hi mate, I'm not sure why it didn't work for you, maybe it's the quantity of zinc in your spray, mine was 99% zinc as you can see in the vid at 00:17 it shows the spray can and you can see the 99% on the label.

@DraganaJeremic-tx4zd 9 ай бұрын

Please help me I have ortur master 3 But i cant engrave on zippo, on stainles steel. How to engrave some text?

@lightworkz61 9 ай бұрын

Hi, first you need to find out if your Zippo is stainless steel or just steel, also did you use the zinc method like I showed in the video? as for the stainless steel, place a magnet next to it, if the magnet sticks then it's just polished steel, not much luck in marking steel, can be done but the result is not worth the effort, for my Zippo it was chrome plated brass, if you use the zinc & speed=500 power=100 it should work just fine, pls can you shop me your results. Thanks for the comment.

@DraganaJeremic-tx4zd 9 ай бұрын

@@lightworkz61 unfortunately is polished and stainless steel

@DraganaJeremic-tx4zd 9 ай бұрын

@@lightworkz61 i tray with cink but doesent workk 😔😔😔

@lightworkz61 9 ай бұрын

ok that is very strange my friend, can you send me some photos ? @@DraganaJeremic-tx4zd

@jg6734 11 ай бұрын

hello please how have watt this laser to engraver zippo , thank you

@jg6734 11 ай бұрын

is 10watt laser ;)

@lightworkz61 11 ай бұрын

Hi, this was a 10w Ortur laser master 3LE, thanks for the comment ;)

@mattzee6287 11 ай бұрын

...so, this won't work with stainless steel, or ??

@lightworkz61 11 ай бұрын

Hi, yes it will work with stainless steel, but if using the 10w module then no need to use anything just engrave straight on to the stainless, but if using a 5w then the zinc spray will give a better marking on stainless steel, I only used the method in the video to mark on chrome, because everyone said it's not possible to engrave on chrome ;) my video showing engraving straight to stainless steel, thanks. kzfaq.info/get/bejne/mZ5goKWY366Vh58.html

@mattzee6287 11 ай бұрын

@@lightworkz61 cool! I forgot to say I liked the video earlier (gen x, poor impulse control) sorry. So cold gal I think is the brand we used for touch ups when I galvanized I beams back in the day(easier than redipping in 960 fahrenheit kettle) do they still make that, or do you recommend a different brand?

@lightworkz61 11 ай бұрын

@@mattzee6287 Hahahahaha hey no worries mate, I use a spray paint called (COSMOSLAC - ZINC MAXIMUM) I buy here in Cyprus for €6, yeah sooooo much easier than redipping mate ;) It's REALLY BAD for you to breath this stuff so PLS be careful when engraving with it.

@mattzee6287 11 ай бұрын

@@lightworkz61 yeah, I'm told it's stinky. Like ,have a garage, or don't do it. Maybe I could sneak into old job, steal some cold gal. 🤔🤔

@lightworkz61 11 ай бұрын

@@mattzee6287 Hehehehehe or just buy a long extension cable and take the laser out in to the fresh air on the driveway or better next to the BBQ snacking while lasering ;)